Sennheiser SR 300 IEMの取扱説明書

30ページ 3.94 mb
ダウンロード

ページに移動 of 30

Summary
  • Sennheiser SR 300 IEM - page 1

    SR 300 IEM Instruction manual ...

  • Sennheiser SR 300 IEM - page 2

    ...

  • Sennheiser SR 300 IEM - page 3

    Contents 1 Contents Important safety instructio ns ............... ............. ................. ................. ............. ................. ..... ..... ............. ............ 2 The evolution wireless series ew 300 IEM G3 ................. ................ .............. .......................... .......... .......... ......... 4 The S ...

  • Sennheiser SR 300 IEM - page 4

    Important safety instructions 2 Important safety instructions • Read this instruction manual . • Keep this instruction manual. Always includ e this in struction manual when p assing the product and the mains unit on to third parties. • Heed all warnings and follow all instruc tions in this instr uction manual. • Only clean the product and t ...

  • Sennheiser SR 300 IEM - page 5

    Important safety instructions 3 Danger due to high volumes This product is also intended for p rofessional use. Commercial use is subject to the safety-at- work regulations. Sennheise r, as the manufacturer, is therefore obl iged to expressly point out possible health risk s arising from use. This product is capable of producing sound pr essure exc ...

  • Sennheiser SR 300 IEM - page 6

    The evolution wireless series ew 300 IEM G3 4 The evolution wireless series ew 300 IEM G3 This transmitter is part of the evolution wirele ss series generation 3 (ew G3). With this series, Sennheiser offers high-quality state -of-the-art RF transm ission system s with a high level of operational reliability and ease of use. T ran smitters and recei ...

  • Sennheiser SR 300 IEM - page 7

    Delivery inc ludes 5 Each frequ ency rang e (A–E, G ) offers 26 freq uenc y banks with up to 16 channels each: Each of the chan nels in the freque ncy banks “ 1 ” to “ 20 ” has been factory-pre set to a fixed transmission frequency (frequency preset). The factory-preset frequencies within one frequency bank are intermodulation-f ree. Thes ...

  • Sennheiser SR 300 IEM - page 8

    Product overview 6 Product overview Overview of the SR 300 IEM G3 transmitter A B PUSH PUSH L(I) R(II) +22dBu MAX Loop Out BAL L(I) R(II) BAL AF IN +22dBu MAX RF OUT 0682 FREQ Range-D 780-822 MHz DESIGNED AND MADE IN GERMANY FMO Stereo Transmitter SR 300 IEM IDENT NO 627925 SER NO 2518100155 IC 2099A-G3SREK ANT 516.000 ew300IEM B.Ch: 1 1 EQ Standar ...

  • Sennheiser SR 300 IEM - page 9

    Product overview 7 Overview of the displays Af ter switch-on, the transmitter displays the standard disp lay. Display Mean ing  Audio level “ AF IN L(I) ” and “ AF IN R(II) ” ( AF = Audio Frequency)  Frequency bank and channel Current frequency bank and channel number  Frequency Current transmissi on frequency  Name Freely selec ...

  • Sennheiser SR 300 IEM - page 10

    Putting the transmitter into operation 8 Putting the transmitter into operation Preparing the transmitter for use Setting up the transmitter on a flat surface Place the transmitter on a flat, ho rizontal surface. Please note that the device feet can leave stains on delicate surfaces. Mounting the rack mount “e ars” T o fasten the rack mount “ ...

  • Sennheiser SR 300 IEM - page 11

    Putting the transmitter into operation 9 Connecting the rod antenna The suppli ed rod an tenna  is suitable for use in good reception condi tions. 왘 Connect the rod antenna  (see diagram). Mounting the transmi tter into a 19” rack Rack mounting one transmitter 왘 Secure the rack mount “ears” of the suppli ed GA 3 rack adapter to the ...

  • Sennheiser SR 300 IEM - page 12

    Putting the transmitter into operation 10 왘 Connect the antenna. Y ou have the following options: – You can connect the supplied rod antenna  to the rear of the transmitter (see page 9). In this case, insert the two blanki ng plugs into the holes of the blanking plate (see diagram on pag e 9). – You can use the AM 2 antenna front mount kit ...

  • Sennheiser SR 300 IEM - page 13

    Putting the transmitter into operation 11 Connecting external devices Connecting external devices to the input sockets 왘 Use a suitable cable to connect the output of an externa l device (e .g. a mixing console or an additional SR 300 IEM G3) to the input socket BAL AF IN L(I)  and/or BAL AF IN R(II)  (see also page 17). 왘 Adjust the outp ...

  • Sennheiser SR 300 IEM - page 14

    Putting the transmitter into operation 12 Connecting transmitters in a network You can connect several transmitters in a networ k. The transmitters are remote controlled via a PC running the “ Wireless Systems Manager ” (WSM) software. This software will assist in the quick and safe configuration of mul ti-channel systems. 왘 Connect a standar ...

  • Sennheiser SR 300 IEM - page 15

    Using the transmitter 13 Using the transmitter T o establish a transmission link, proceed as follows: 1. Switch the transmitter on (see below). 2. Switch the receiver on (see the instruction manual of the receiver). The transmission l ink is established. If you cannot establish a transmission l ink between transmitter and receiver: 왘 Make sure th ...

  • Sennheiser SR 300 IEM - page 16

    Using the transmitter 14 To activate the RF signal : Monitoring the audio signal via headpho nes You can monitor the audio sign al via the hea dphone output. 왘 Set the headphone volume control  to the minimum position. 왘 Connect headphones with a ¼” (6.3 mm) stereo jack plug to the headphone output  . 왘 Gradually incre ase the volume ...

  • Sennheiser SR 300 IEM - page 17

    Using the transmitter 15 Carrying out an Easy Setup Sync or a Sync f unction The following assumes that you are using the Easy Setup Sync function for setting up a multi- channel system. You can also you the Easy Setup Sync function for establishing a transmis- sion link between one transmitter and one receiver. Setting Transferred parameters “ B ...

  • Sennheiser SR 300 IEM - page 18

    Using the transmitter 16 왘 Place the infra-red interface of the receiver (see the instruction manual of the receiver) in front of the infra-red interface  of the first transmitter. The next u nused fr equency pre set is transferred from the receiver to the transmitter . As soon as the transfer is completed, the display panel of the tr ansmitte ...

  • Sennheiser SR 300 IEM - page 19

    Using the transmitter 17 Adjusting the audio channels Via the “ Mode ” menu item, you can adjust the audio channels. 왘 Select “ Stereo ” if you want to transmit two separate audio signals on channel I and channel II (e.g. channel I = audio signal of the prese nter/musician, channel II = sum of all audio signals). This allows the presenter ...

  • Sennheiser SR 300 IEM - page 20

    Using the transmitter 18 Deactivating the lock mode temporarily You can activate or deactivate th e automatic lock mode via the “ Auto Lock ” menu item. If the lock mode is activated, you have to temporarily deactivate it In order to be able to operate the transmitter: The lock mode icon  flashes prior to the lock mode being activated again. ...

  • Sennheiser SR 300 IEM - page 21

    Using the operating menu 19 Using the operating menu The buttons Button Function of the button Press the S TANDBY button • Switches the transmitter on and off • Cancels the entry and returns to the standard display (ESC function) • Activates/deactivates the RF signal (special function, see page 18) Press the j og dial • Changes from the sta ...

  • Sennheiser SR 300 IEM - page 22

    Using the operating menu 20 Overview of the operating menu When the standard display is shown on the disp lay panel, you ca n get into the main menu by pressing the jog dia l. The extended menu “ Advanced Menu ” and the othe r menus can be accessed via the corre sponding menu items. For more de tailed information on the ope rating menu, refer t ...

  • Sennheiser SR 300 IEM - page 23

    Synchronizing the transmitter with a receiver 21 Synchronizing the transmitter with a receiver When synchronizing your tra nsmitter with a receiver, please obs erve the following: Synchronizing the transmitter with a receiver – individual operation Upon delivery, transmitter and receive r are sync hronized with each other. If, however, you cannot ...

  • Sennheiser SR 300 IEM - page 24

    Synchronizing the transmitter with a receiver 22 Synchronizing transmitters wit h receivers – multi-channel operation Network operation using the WSM In multi-channel operation, the transmitters are remote controlled via a PC running the “ Wireless Systems Manag er ” (WSM) software. 왘 Connect your transmitters and your PC in a network (see ...

  • Sennheiser SR 300 IEM - page 25

    Cleaning the transmitter 23 Cleaning the transmitter 왘 Before cleaning, disconnec t the device from the mains. 왘 Use a slightly damp c loth to clean the devi ce from time to time. Do not use any solvents or cleansing agents. If a problem occurs ... CAUTION! Liquids can damage the elec tronics of the transmit ter! Liquids entering the housing of ...

  • Sennheiser SR 300 IEM - page 26

    If a problem occurs ... 24 If a problem occurs that is not listed in the above ta ble or if the problem cannot be solved with the proposed solutions, please contact your loca l Sennheiser partner for assistance. T o find a Sennheiser partner in your country, search at www.sennheiser.com under “Service & Support”. Audio signal is distorted I ...

  • Sennheiser SR 300 IEM - page 27

    Specificati ons 25 Specifications In compliance with RF characteristics Frequency ranges 516–558, 566–608, 626–668, 734–776, 780–822, 823–865 MHz (A to E, G, see page 4) T ransmission f requencies 1,680 frequenc ies, tuneable in steps of 25 kHz Switching bandwidth 20 frequency banks , each with up to 16 factory-preset channels Frequency ...

  • Sennheiser SR 300 IEM - page 28

    Specifications 26 Approved by NT 2-3 mains unit In compliance with The mains unit is certified in ac cordance with the legal safety requirements of Europe, the United States, Canada, Russia and Japan. Connector assignment Canada Industry Canada RSS 210, IC: 2099A-G3SREK limited to 806 MHz USA FCC-Part 74 FCC-ID: DMOG3SREK limited to 698 MHz Input v ...

  • Sennheiser SR 300 IEM - page 29

    Manufact urer Declarat ions 27 Manufacturer Declarations W arranty Sennheiser electronic GmbH & Co. KG give s a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www.sennheis er.com or contact your Sennheiser partner. In compliance with th e following requirements • RoHS Directive (2002/9 ...

  • Sennheiser SR 300 IEM - page 30

    Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 W edemark, Germany www.sennheiser.com Printed in Germany Publ. 01/09 529680/A01 ...

メーカー Sennheiser カテゴリー Satellite Radio

Sennheiser SR 300 IEMのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- SR 300 IEMの取扱説明書
- Sennheiserの製品カード
- パンフレット
- またはSennheiser SR 300 IEMの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Sennheiser SR 300 IEMの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Sennheiser SR 300 IEMの取り付け説明書、サービスマニュアル、簡易説明書、またはSennheiser SR 300 IEMのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Sennheiser SR 300 IEMの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Sennheiser SR 300 IEMデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSennheiser SR 300 IEMを使用するのを助ける技術的文書のことです。説明書は通常、全てのSennheiser SR 300 IEMユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Sennheiserの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Sennheiser SR 300 IEMの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSennheiser SR 300 IEMの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Sennheiser SR 300 IEMに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Sennheiser SR 300 IEMデバイスの基本機能を使うにあたってのヒント。 Sennheiser SR 300 IEMのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Sennheiser SR 300 IEMに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSennheiser SR 300 IEMのメーカー/サービスへの連絡先に関する情報。

Sennheiser SR 300 IEMについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもSennheiser SR 300 IEMの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSennheiser SR 300 IEMで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)