Nikon SB-102の取扱説明書

36ページ 16.31 mb
ダウンロード

ページに移動 of 36

Summary
  • Nikon SB-102 - page 1

    Nikon NIKONOS Speedlighf INSTRUCTION MANUAL ...

  • Nikon SB-102 - page 2

    NOMENCLATURE ______ _ CD Synchro socket index (J) Sensor socke t ® ro socket ® Synchro soc ket cover @ Snp,erllin l ht ® Camera plug and locking ring @ Sensor holder socket @ Sensor holder positioning pin @ Bracket slot @ Bracket screw @B r acket @ Buckle lock/release latch @ calculation dial sc rew ® Exposure calculation dial Exposure calculat ...

  • Nikon SB-102 - page 3

    CONTENTS ________ _ NOMENCLATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FOREWORD .. . . ... . . .. . ...... . ........ .. . ..... 4 PREPARATION .......... ................... 4-6 Examining and lubricating the O-rings ... .. 5 The O-rings and their sealing method .... . . 6 TIPS ON SPEEDLIGHT CARE. . . . . . . . . . . . . . . ...

  • Nikon SB-102 - page 4

    FOREWORD ________ _ The Nikonos 8peedlight 88-102 , an amphibious high - performance electronic flash unit with a s il i con-con - trolled rectifier and series circuitry , is de s igned for u s e with the Nikonos-V , Nikonos IV - A , and Nikonos III. The 88-102 can be submerged to a depth of 50 meters (160 feet) and withstand pressure of up to 6kg/ ...

  • Nikon SB-102 - page 5

    PREPARATION-continued E xam in ing and lubr ic a ti ng the O -r ing s: 1 . To remove the O-rings , except those in the synchro socket and sensor socket covers , grasp the ring be- tween your thumb and forefinger . Pinch your fingers together as you slide them in the direction of the arrow to create slack in the O-ring. Then grasp the slack portion ...

  • Nikon SB-102 - page 6

    PREPARATION-continued ______ _ The preceding instructions must be performed on each user-serviceable O-ring prior to each dive day and , if possible , prior to each dive . By following these pro - cedures and all other procedures in this instruction manual , you will be able to enjoy using your Nikonos 8peedlight 8B-102 for many years . Reminder: A ...

  • Nikon SB-102 - page 7

    TIPS ON SPEEDLIGHT CARE 1. After using the speedlight and camera under- water, rinse them both as soon as possible in fresh running water with the sync and sensor cords attached . When the speedlightlcamera assembly gets dirty , rinse it thoroughly in fresh water. Immediately after using it in salt water , rinse it thoroughly in fresh water to remo ...

  • Nikon SB-102 - page 8

    BASIC OPERATI, ;::: O ..:....: N ~ S ======= ~ === ~=----= =-= 1. Unlock the buckle lock/release latches @ and unlock the buckles ®> . Pu ll up the buckle lock/re l ease l atch and push the buck l es outward and downward . Note : The small number s in circles identify part s of the spee dfight as fisted i n the NOMENCLATURE sectio n. 3 Remove t ...

  • Nikon SB-102 - page 9

    5 Replace the C - type • battery cartridge in the battery chamber. Be sure the speedlight power switch ® is in the " OFF " position , then align the groove on the battery car - tridge with the notch on the i nside of the compartment and slide the battery cartridge into the chamber. 8 Lock the buckle lockl • release latches. Push the ...

  • Nikon SB-102 - page 10

    BASIC OPERATIONS-confinued ___ _ 11 Insert the joint plate • into the joint collar @ . While holding the base of the joint knob against the joint , slide the joint plate into the joint collar until it is fully seated. o When ins er ting th e joint plate into the joint collar, be su re the flat edges of t he joint plate remain parallel to the flat ...

  • Nikon SB-102 - page 11

    17 Loosen the arm • knob @ . Turn the arm knob counterclock - wise as far as it will go to loosen it (the two bracket positioning pins on the bottom of the grip @ will be v i s i ble ). 19 Attach the cord • fastening hanger ® to the bracket. As shown in the photo, slide the cord fastening hanger onto the bracke t. 18 Attach the bracket • ® ...

  • Nikon SB-102 - page 12

    BASIC OPERATIONS-confinued ___ _ 22 Connect the sync • cord @ to the camera . Remove the dust - proof plast ic cap from the sync cord ' s camera plug (silver) . Insert the camera plug in the camera's flash socket after aligning the white inde x on the flash sync socket with the red inde x on the camera plug . When the camera plug is ins ...

  • Nikon SB-102 - page 13

    26. Set the ASA/ISO film speed. Turn the exposure calculation dial @ until the correct shooting situa- ti on mark i@i is opposite the ASAIISO speed of the film in the camera. Choose which mark to use accord- ing to the shooting situation: a. . On-land photography ~ : On-land photography with the wide-flash adapter .. : Underwater photography W : Un ...

  • Nikon SB-102 - page 14

    BASIC OPERATIONS-confinued ___ _ A·3. Set the f/stop on the lens. When you have determined wh ic h flstop to use , set this fl stop on the lens . In the photograph , f/8 is se t. B·2. Remove the sensor socket cover @ . T urn the sensor socket cover counterclockwise , then pull it up. 14 288. Non-TTL. Automatic Operation. B · 1. Attach the Sensor ...

  • Nikon SB-102 - page 15

    B·5. Select an f/stop with th e exposure calculation dial. Select an aperture by using the non·TTL auto shooting aperture scale @ and non·TTL auto shooting aperture index @. For example, when the shooting situation mark ( ell : underwater photography) is set to A8AIISO 100 , the non-TTL auto shooting aperture index is opposite the fIB on the gre ...

  • Nikon SB-102 - page 16

    BASIC OPERATIONS-confinued ___ _ • With a set of fully recharged NiCd batteries , the r eady-light will light in approximately 5 seconds; with a fresh set of alkaline· manganese batteries, it wiff light in approxi· mately 1 4 seconds. . If ei t he r the S8 - 102's or the camera's ready· li g ht does not light, check that: the batteri ...

  • Nikon SB-102 - page 17

    CONTROLS IN DETAIL ~~ ::::;-:;= ~k::sens~or un~it SU-::---101 Nikonos III @@ Ni konos - V or Nikonos IV - A -- - ., - " - Bracket ® As indicated in the diagram there are two positions for the bracket screw @ : one for Nikonos-V and Nikonos IV-A and another for the Nikonos III. To reposition the bracket screw, unscrew it, then screw it back in ...

  • Nikon SB-102 - page 18

    CONTROLS IN DETAIL-continued ___ _ Joint @ The joint connects the arm to the speedlight and allows the flash head to be positioned as required for various shooting situations . The arm can be inserted from either side of the joint , the normal position is shown in the photo . When using two SB-102 Speedlights and the optional Double Flash Bracket , ...

  • Nikon SB-102 - page 19

    Synchro Socket ® To connect the sync cord @) to the speedlight , remove the synchro socket cover ® by turning it counterclock - wise and pulling it up . Remove the dust - proof plastic cap from the sync cord ' s speedlight plug @ (black) . Insert the speedlight plug into the s ynchro socket after aligning the synchro socket inde x CD with th ...

  • Nikon SB-102 - page 20

    CONTROLS IN DETAIL-continued ___ _ Sensor Unit SU - 101 (Optional) Mounting the SU·101 on the camera : Turn the sensor unit's locking wheel counterclockwise as far as it will go, slip the unit 's mounting foot into the camera's accessory shoe, and turn the locking wheel clockwise to tighten it. In combination with the optional Senso ...

  • Nikon SB-102 - page 21

    " AUTO " -Non - TTL Automatic Flash Mode Wh en the opt i on a l Sen s or Unit SU - 101 is us ed , thi s mod e provid es non-TTL a utomatic fl as h operation . In thi s mode , the se ns or unit r ea d s th e l ight refl e ct ed b a ck from th e s ub jec t whil e the sp ee dlight is firing and t e ll s th e sp ee d l ight to tu rn i ts el f ...

  • Nikon SB-102 - page 22

    CONTROLS IN DETAIL-continued ___ _ Exposure Calculation Dial ® In flash photography, which apertures can be used is closely related to the flash-to-subject distance . To deter- mine the u seable apertures , align the shooting situation ma rk on t h e exp o sure c al culati o n d ia l with the A S A II S O film speed in use, find the flash-to-subje ...

  • Nikon SB-102 - page 23

    Example 2: When shoot i ng a subject underwater at 4m (1 3 ft) with the wide-flash adapter while using ASAIISO 100 film , you must use f/2 . B . When several f/stops are useable at a specif i c flash - t o-subject d i stance , make your s election by taking the des i red depth of field and speed light recycling time into consideration. TTL Auto Sho ...

  • Nikon SB-102 - page 24

    CONTROLS IN DETAIL-continued ___ _ Non-TTL Automatic Flash Control When using the optional Sen sor Unit SU-101 , you can selec t one of two useable apertures. The useable apertures vary according to the ASAIISO speed of the film in use , but they can be easily deter- mined with the exposure calculation dial. When the correct shooting situation mark ...

  • Nikon SB-102 - page 25

    Manual Flash Control Manual flash operation allows you to control the light output of the SB-102 by setting the shooting mode selector to one of three positions : "MFULL," "M1/4 , " or "M1/16." To determine which setting to use , begin by aligning the correct shooting situation mark with the correct speed on the ASAIIS ...

  • Nikon SB-102 - page 26

    CONTROLS IN DETAIL-continued ___ _ Example 3: Shooting a subject on land at 8m (26.2ft) without u si ng the wide-flash adapter while using ASAIISO 100 film and "MFULL": The GN for " MFULL " at ASAIISO 100 on land is 32 (from the chart below). Divide the GN of 32 by the flash-to-subject distance of 8m to get the correct aperture ...

  • Nikon SB-102 - page 27

    Non·TTL Automatic Flash Exposure Compensation When shooting in the non-TTL automatic flash exposure mode, exposure compensation can be made by stop- ping down or opening up the lens . To compensate for a dark subject , use a 1/ 2- to 2-step smaller aperture (a numerically larger f - number) . To compensate for a light subject, use a 1/2- to 2-step ...

  • Nikon SB-102 - page 28

    CONTROLS IN DETAIL-continued ___ _ Because of these three factors, the ready-light may blink to indicate that the light output was insufficient for correct exposure even if the subject was within the coupling distance range . Camera and Speedlight Ready·Lights l Other Warning Functions: 1. When the shutter speed/mode selector dial of the Nikonos - ...

  • Nikon SB-102 - page 29

    Cord Fasten i ng Hanger @ This hanger secures the sync cord to the bracket to keep it out of the way while shooting . To use the cord fastening hanger, attach it to the speed- l i ght bracket as shown in the photo , then attach the sync cord to the hook. Attach i ng the SW-102 To attach the adapter , align the adapter 's mounting notches with ...

  • Nikon SB-102 - page 30

    CONTROLS IN DETAIL-continued ___ _ Replacing the Target-light If the target-light burns out, replace it with a new one (provided) by performing the following procedures: 1. Remove the battery chamber cap (see page 8) . 2. Remove the C-type battery cartridge. 3 . Turn the target-light holder @ counterclockwise ap- pro x imately 45 ° . 4 . Pull up o ...

  • Nikon SB-102 - page 31

    TIPS ON SPEEDLIGHT PHOTOGRAPHY 1 . The flash - to-subject coupling distances and use- able apertures indicated by the exposure calcula- tion dial are for clear-water shooting . Therefore, the correct exposure will be different if the water is muddy or has floating particles, and some expo- sure compensation must be made . 2 . In shallower depths wi ...

  • Nikon SB-102 - page 32

    OPTIMUM BATTERY PERFORMANCE 32 1. New batteries B etween manufacture and first use , all batteries ex hibit s ome drain. Therefore , care should be taken to purch a se the newest (and freshe s t) one s p ossible . To help you do this , some manufacturers stamp the date of manufacture on the bottom of each battery. A sk your camera dea l er for a ss ...

  • Nikon SB-102 - page 33

    ACCESSORIES _______ _ Numerous accessories are available to increase the S8-102's versatility . Sensor Unit SU·101 This unit is required when using the S8 - 102 in the non-TTL autom a tic flash mode with the Nikonos - V, Nikonos IV-A, or Nikonos III. Sensor Holder (for SB·102) When a plastic frame finder or an optical underwater viewfinder i ...

  • Nikon SB-102 - page 34

    ACCESSORIES-continued ______ _ Double 5ync Cord Wh en u sing th e N i kon os- V , th is co rd e nabl es tw o S8 - 10 2 Spe e dlight s to b e use d in t he TTL a ut omat ic fla sh m ode . • When using two S8-102 Speedlights in the TTL automatic flash mode , the correct shooting situation mark on the exposure calcula- tion dial must be realigned wi ...

  • Nikon SB-102 - page 35

    SPECIFICATIONS __ _ ____ _ Flash Type: Useable Exposure Modes: Guide Numbers : Angle of Cove r age : Batteries: Number of Flashesl Recycling Time: Useable Ranges : Resistant Pressure: Target·Light : Slave Flash Function : Dimensions: Weight : High-performance silicon- controlled rectifier and series circuitry T TL auto exposure (with Nikonos-V cam ...

  • Nikon SB-102 - page 36

    No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authoriza- tion from the publishers . (N;lro,,) NIPPON KOGAKU K.K . Printed in Japan 8&067 - A06 ...

メーカー Nikon カテゴリー Camera Accessories

Nikon SB-102のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- SB-102の取扱説明書
- Nikonの製品カード
- パンフレット
- またはNikon SB-102の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Nikon SB-102の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Nikon SB-102の取り付け説明書、サービスマニュアル、簡易説明書、またはNikon SB-102のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Nikon SB-102の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Nikon SB-102デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがNikon SB-102を使用するのを助ける技術的文書のことです。説明書は通常、全てのNikon SB-102ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Nikonの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Nikon SB-102の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははNikon SB-102の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Nikon SB-102に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Nikon SB-102デバイスの基本機能を使うにあたってのヒント。 Nikon SB-102のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Nikon SB-102に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるNikon SB-102のメーカー/サービスへの連絡先に関する情報。

Nikon SB-102についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもNikon SB-102の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNikon SB-102で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)