Altinex MT105-101の取扱説明書

23ページ 0.98 mb
ダウンロード

ページに移動 of 23

Summary
  • Altinex MT105-101 - page 1

    MULTI - TASKER ™ MANUAL PART NUMBER: 400 - 0131 - 004 16 - IN, 8 - OUT VIDEO MATR IX SWITCHER CARDS FOR MULTI - TASKER USER’S GUIDE MT105 - 100/MT105 - 101 ...

  • Altinex MT105-101 - page 2

    MULTI - TASKER ™ 400 - 0131 - 004 1 1 TA BLE OF CONTENTS Page PRECAUTIONS / SAFETY WA RNINGS .............. 2 GENERAL .......................................................... 2 INSTALLATION ................................................. 2 CLEANING ......................................................... 2 FCC / CE NOTICE ................... ...

  • Altinex MT105-101 - page 3

    MULTI - TASKER ™ 400 - 0131 - 004 2 2 PRECA UTIONS / SA FETY WA RNINGS 1 Please read this manual carefully before using your MT105 - 100/101 . Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT105 - 100/101 and to prevent f ire and shock hazard. Please read them carefully and heed all war ...

  • Altinex MT105-101 - page 4

    MULTI - TASKER ™ 400 - 0131 - 004 3 3 AB OUT YOUR MT105 - 100/101 2 MT 105 - 100/MT105 - 101 16 - in 8 - out Video Matrix Switcher Cards The MT105 - 100/101 16 - in, 8 - out Video Matrix Sw itcher card is designed to allow the routing of computer and broadcast video in audio/visual presentation systems. T his card enables 16 composite video sourc ...

  • Altinex MT105-101 - page 5

    MULTI - TASKER ™ 400 - 0131 - 004 4 4 DESCRIPTION OF MT105 - 100/101 4 BOTTOM RETAINER SCREWS OUTPUTS 8 VIDEO TOP RETAINER SCREWS INPUTS 16 VIDEO ...

  • Altinex MT105-101 - page 6

    MULTI - TASKER ™ 400 - 0131 - 004 5 5 AP PLICA TION DIA GRA MS 5 DIA GRA M 1: TYPICA L SETUP MT105-100 ...

  • Altinex MT105-101 - page 7

    MULTI - TASKER ™ 400 - 0131 - 004 6 6 DIA GRA M 2 : INT ERNA L VIEW MT105 - 100 MATRIX CONTROL 16X8 MATRIX SW + 300MHZ + BNC IN/OUT BNC GL I MATRIX SWITCHER IN 8 IN 15 IN 14 IN 13 IN 12 IN 11 IN 10 IN 9 IN 5 IN 7 IN 6 IN 4 IN 3 IN 1 IN 2 IN 16 OUT 4 OUT 7 OUT 8 OUT 6 OUT 5 OUT 3 OUT 2 OUT 1 BNC GL I GL I GL I GL I GL I GL I GL I GL I GL I GL I GL ...

  • Altinex MT105-101 - page 8

    MULTI - TASKER ™ 400 - 0131 - 004 7 7 DIA GRA M 3 : INTERNA L VIEW MT105 - 101 MATRIX CONTROL BNC MATRIX SWITCHER IN 8 IN 15 IN 14 IN 13 IN 12 IN 11 IN 10 IN 9 IN 5 IN 7 IN 6 IN 4 IN 3 IN 1 IN 2 IN 16 OUT 4 OUT 7 OUT 8 OUT 6 OUT 5 OUT 3 OUT 2 OUT 1 BNC 16X8 MATRIX SW + 200MHZ + BNC IN/OUT ...

  • Altinex MT105-101 - page 9

    MULTI - TASKER ™ 400 - 0131 - 004 8 8 INSTA LLING YOUR MT105 - 100/101 6 Step 1. Turn off power to the Multi - Tasker™ enclosure. Step 2. Slide the MT105 - 100/101 into an avail able slot in the Multi - Tasker™ e nclosure in order to connect to the bus. Make sure that the MT105 - 100/101 card fits into place. Secure the card to the Multi - Ta ...

  • Altinex MT105-101 - page 10

    MULTI - TASKER ™ 400 - 0131 - 004 9 9 The Group ID is a number represen ting a group of cards defined with the [W R] command. W hen using the Group ID, all cards in the group will perform the given instruction. Changing the position of a card will significantly affect the commands recorded on software definitions or third party control systems. T ...

  • Altinex MT105-101 - page 11

    MULTI - TASKER ™ 400 - 0131 - 004 10 10 FEEDBACK COMMANDS : ?, ?Cn and STA The next three commands are a function of both the card and the front panel and are only available wi t h Multi - Tasker™ Front Panel systems that have the following firmware: 690 - 0122 - 015 = Version 015 or later. 690 - 0123 - 004 = Version 004 or later. 690 - 0124 - ...

  • Altinex MT105-101 - page 12

    MULTI - TASKER ™ 400 - 0131 - 004 11 11 Example : Command = [ I2O*C4 ] Feedback = (MA0202020202020202C0 4) MA = Matrix Settings 0202…02 = Output connections C04 = Card ID Output Connection Desc ription: Reading from left to right, the first two digits are for output 1, the next two for output 2, and so on. Each two digit pair represents the inp ...

  • Altinex MT105-101 - page 13

    MULTI - TASKER ™ 400 - 0131 - 004 12 12 9. [OFF] This command disables one or all out puts of a single card or a group of cards. SINGLE CARD OPERATION Command Format: [OFFmCnUi] m = Out put number (m = # from 1 to 8) Cn = Card ID (n = # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: Card 5 has Out put 1 on . The following commands ...

  • Altinex MT105-101 - page 14

    MULTI - TASKER ™ 400 - 0131 - 004 13 13 12. […P] – PA TH This command will set the path for the output, but it is not active until the switch command, [SW ] , is executed. Commands ending in "P" are not executed immediately. The path for outputs on multiple cards or the same card can be pre loaded. See the examples in [ ON ] and [ O ...

  • Altinex MT105-101 - page 15

    MULTI - TASKER ™ 400 - 0131 - 004 14 14 Example: Send the command [CLRC4] to reset the card in slot 4. After the reset, the status of C4 will be s imilar to the following depending on the matrix configuration : Matrix:16X8 In01 - Out1 ON In01 - Out2 ON In01 - Out3 ON In01 - Out4 ON In01 - Out5 ON In01 - Out6 ON In01 - Out7 ON In01 - Out8 ON Input ...

  • Altinex MT105-101 - page 16

    MULTI - TASKER ™ 400 - 0131 - 004 15 15 18. [RSI] This command resets the card ID's in the system. After sending this command, each card ID in the system will match the slot number of the card. If the card is moved to another slot, its ID num ber will be the new slot number. Command Format: [ RSI ] Example: Send the command [RSI] to the syst ...

  • Altinex MT105-101 - page 17

    MULTI - TASKER ™ 400 - 0131 - 004 16 16 23. [TEST] This command performs a test on the internal memory. Upon completion, the system will display the results. If there are no problems, the system will display the following: MEMORY IS GOOD Otherwise, failures will be indicated. Command Format : [TESTCnUi] Cn = Card ID (n = slot # from 1 to max slot ...

  • Altinex MT105-101 - page 18

    MULTI - TASKER ™ 400 - 0131 - 004 17 17 Command Format: [W RCn 1 Cn 2 …GkUi] Cn = Card ID (n = slot # from 1 to max slots) Gk = Group number (k = # from 1- 8) Ui = Unit ID (i = # from 0 - 9) Example: G roup cards 2 , 4 , and 6 as group 5 of Unit ID 1 by send ing the command [W RC 2C4C6 G5U1] . After executing this command, cards 2 , 4 and 6 wil ...

  • Altinex MT105-101 - page 19

    MULTI - TASKER ™ 400 - 0131 - 004 18 18 7.3.SUMMA RY OF COMMA NDS. Card Commands 1) [VER] Display softw are version . 2) [C] Display status of the card. 3) [CnS] Save card settings . 4) [?] Show system cards . 5) [?C] Sh ow card information . 6) [STA 1] Enable auto feedback . 7) [STA 0] Disable auto feedback . 8) [ON] Enable outputs . 9) [OFF] Di ...

  • Altinex MT105-101 - page 20

    MULTI - TASKER ™ 400 - 0131 - 004 19 19 7.4.2 USING MENU MODE SUGGESTION: Before using the menu mode, it is best to disable the automatic feedback feature. The values and current settings will be displaye d in the menu mode, but the automatic feature will display after each setting change making the menus difficult to read. 1. In order to enter m ...

  • Altinex MT105-101 - page 21

    MULTI - TASKER ™ 400 - 0131 - 004 20 20 MT 105 - 100 MAIN MENU PRESS KEY TO SELECT 1: CONTROL 2: SETUP 3: STATUS 4: HELP ESC: GO BACK KEY = MT 105 - 100 EXPANDED MENUS 1. CONTROL: FOR THIS CARD 1: SELECT (Card/Group for Control) CURRENT SELECTION: THIS CARD 0: This Card 1: Group 1 2: Group 2 3: Group 3 4: Group 4 5: Group 5 6: Group 6 7: Group 7 ...

  • Altinex MT105-101 - page 22

    MULTI - TASKER ™ 400 - 0131 - 004 21 21 7.4.5 MENU MODE EXA MPLES All MENU MODE examples assume an MT105 - 100 is installed in slot 1. Start by clicking the mouse in the terminal window. Press ENTER and a list of availabl e cards will be displayed. NOTE Wh en entering numeric values (not selecting menu items) the system may echo each character as ...

  • Altinex MT105-101 - page 23

    MULTI - TASKER ™ 400 - 0131 - 004 22 22 TROUBLESHOOTING GUIDE 8 We have carefully tested and have found n o problems in the supplied MT105 - 100/101 ; however, we would like to offer suggestions for the following: 8.1 NO DISPLA Y Cause 1 : The source has a problem. Solution: Check the source and make sure a signal present and all source connectio ...

メーカー Altinex カテゴリー Switch

Altinex MT105-101のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- MT105-101の取扱説明書
- Altinexの製品カード
- パンフレット
- またはAltinex MT105-101の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Altinex MT105-101の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Altinex MT105-101の取り付け説明書、サービスマニュアル、簡易説明書、またはAltinex MT105-101のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Altinex MT105-101の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Altinex MT105-101デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAltinex MT105-101を使用するのを助ける技術的文書のことです。説明書は通常、全てのAltinex MT105-101ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Altinexの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Altinex MT105-101の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAltinex MT105-101の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Altinex MT105-101に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Altinex MT105-101デバイスの基本機能を使うにあたってのヒント。 Altinex MT105-101のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Altinex MT105-101に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAltinex MT105-101のメーカー/サービスへの連絡先に関する情報。

Altinex MT105-101についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもAltinex MT105-101の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAltinex MT105-101で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)