-
Hunter Fan 42406-01 - page 1
T ype 2 Models T ype 2 Models T ype 2 Models Form# 42406-01 20080926 ©2008 Hunter Fan Co. For Y our Records and W arranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No. ____________________________ ...
-
Hunter Fan 42406-01 - page 2
2 Hunter F an Company 42406-01 • 20080926 T ab le of Contents 1 • Getting Ready ................................................... 4 2 • Installing the Ceiling P late .......................... 5 3 • Ass embling and Hanging the Fan .......... 6 4 • Wiring the Fan .................................................. 7 5 • Installing the C ...
-
Hunter Fan 42406-01 - page 3
3 Ins t aller ’ s Choice a nd O ptional Acc ess orie s Low Profile Mounting ts clos e to the ceiling, recommended for ceilings l ess than 8 feet high Standard Mounting hang s from the ceiling by a downrod (included), recommended for ceilings 8 feet or higher Angle Mounting recommended for a vaulted or angled ceiling Understan ding Mountin g a ...
-
Hunter Fan 42406-01 - page 4
4 Hunter F an Company 42406-01 • 20080926 1 • Getting Rea dy T o install a ceiling fan, be sure you can do the following: • Lo cate the ceiling joist or ot her suitable supp ort in ceiling . • D rill holes for and install woo d s crews. • I dentify and conne ct elec trical wires. • Li ft 40 pounds . If you need help installing the fan, ...
-
Hunter Fan 42406-01 - page 5
St ep T itl e 5 Hunter F an Company 42406-01 • 20080926 2 • Ins t allin g th e Ce ilin g Plat e CAU TION: T o avoid possible ele ctrical shock , be fore ins talling your f an, disconnect the p ower by t urning o the circuit br eakers t o the outlet box and asso ciated wall switc h loc ation. If you cannot lock the circuit br eakers in the o? ...
-
Hunter Fan 42406-01 - page 6
6 Hunter F an Company 42406-01 • 20080926 3 • Assem bling and Han gin g th e F an W ARNING: Fan ma y fall if not a ssemble d as directed in these installation ins tructions. 3-1. Unbundle the wires from t he fan. For Standard or Angle mounting: 3-2. T o ass emble f an to hang down from a at or angled ceiling, inser t the downrod through the ...
-
Hunter Fan 42406-01 - page 7
St ep T itl e 7 Hunter F an Company 42406-01 • 20080926 4 • Wiring th e F an All wiring must b e in accorda nce with national and lo cal ele c trical code s and ANSI/NFP A 70. If you are unfamiliar with wiring , u se a qualifie d elec trician. W all swit ches are not included. Sele ct an acceptable general-use switch in accordanc e with nat io ...
-
Hunter Fan 42406-01 - page 8
8 Hunter F an Company 42406-01 • 20080926 5 • Ins t allin g th e Canopy and C anopy T rim Rin g 5-1. Rotate the hange r ball so the tab in the cano py is secure in the groove in the hanger ball. W ARNING : Failur e to complete thi s step could cause fan to fall. 5-2. Lift the fan and align the canopy screw holes with the mounting holes on the c ...
-
Hunter Fan 42406-01 - page 9
9 Hunter F an Company 42406-01 • 20080926 6 • A ssembling th e Bl ade s Hunte r fans us e several styl es of fan blad e irons (brack ets that hold the blade to the fan). 6-1. Y our f an may inc lude blad e grommets. If your f an has grommets, insert them by hand int o the holes on the blad es. 6-2. Attach each blade to a blade iron using thr ee ...
-
Hunter Fan 42406-01 - page 10
10 Hunter F an Company 42406-01 • 20080926 7 • Completin g Y o ur Ins t all ation With or Without a Lig ht Fixture Y our Hunter fan comes with an int egrated light xt ure assembly and an optional swit ch housing cap and plu g button. i s feat ure gives you the option of installing the fan with OR without t he included light xtur e. ...
-
Hunter Fan 42406-01 - page 11
11 Hunter F an Company 42406-01 • 20080926 Lower Swit ch Housing Plug Connector Housing Ass embly Screw Plug Connector Detail Steps 7-6 – 7-7 7-6. T o attach the lower swit ch housing , connect the upp er plug connector from the motor to t he lower plug connec tor in the lower switc h housing as sembly . No te: Bo th plug connectors are po lari ...
-
Hunter Fan 42406-01 - page 12
12 Hunter F an Company 42406-01 • 20080926 7 • Completin g Y o ur Ins t all ation With or Without a Lig ht Fixture ( C ontinued) Uninstalling the Lig ht Fixture 1. T o uninstall the light xt ure, rst disconnect the plug connec tors betw een the black wire and t he red wire. 2. Disconnec t the plug connectors b etween the two white wires. ...
-
Hunter Fan 42406-01 - page 13
13 Hunter F an Company 42406-01 • 20080926 Installing the Gl ass Bowl 1. First install two candelabra ba se incand escent bulbs. 2. Attach t he extra pull chain (included) to the fan pull chain using the plastic breakawa y connector . (Y ou may nd the plastic breakawa y connector on the end of the extra ch ain.) 3. read the fan pull chain t ...
-
Hunter Fan 42406-01 - page 14
14 Hunter F an Company 42406-01 • 20080926 8-1. T urn on elec trical power to the fan. 8-2. e fan pull chain contr ols power to the fan. e pull chain has four settings in se quence: High, Medium, Low and O. • Pull the c hain slowly to ch ange settings . • Release slowly to preven t the chain from r ecoiling into the blades. • e ...
-
Hunter Fan 42406-01 - page 15
St ep T itl e 15 Hunter F an Company 42406-01 • 20080926 9 • T ro uble shoo ting Problem: No thing happens; f an do es no t move. 1. T urn p ower on, replace fuse, or reset breaker . 2. Lo osen canopy , check all connections according to t he wiring the fan se ction. 3. Check the plug connec tion in the swit ch housing . 4. Push motor reve rsin ...
Hunter Fan 42406-01についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもHunter Fan 42406-01の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHunter Fan 42406-01で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。