SMC Networks SMC8013WGの取扱説明書

40ページ 1.1 mb
ダウンロード

ページに移動 of 40

Summary
  • SMC Networks SMC8013WG - page 1

    EZ Connect ™ Wireless Cable Modem Gateway Install Guide SMC8013WG ...

  • SMC Networks SMC8013WG - page 2

    Copyright Information furnished by SMC Network s, Inc. (SMC) is believed to be accura te and reliable. However, no responsibility is assumed by SMC fo r its use, n or for any infringements of patents or other rights of third parties which may resu lt from its use. No license is grant ed by implication or otherwise under any pa tent or pate nt right ...

  • SMC Networks SMC8013WG - page 3

    TABLE OF CONTENTS CHAPTER 1 | Introduction Features and Benefits Package Contents Minimum Requirements CHAPTER 2 | Getting to know th e Wireless Cable Modem Gateway LED Indicators Rear Panel Description Resetting and Restoring the Wireless Cable Modem Gateway CHAPTER 3 | Installation Basic Installation Procedur e CHAPTER 4 | Configuring your C ompu ...

  • SMC Networks SMC8013WG - page 4

    CHAPTER 1 | Introduction Congratulations on your purcha se of the EZ Connect™ Wireless Cable Modem Gateway. SMC is proud to provide you with a powerful yet simple co mmunication device for connecting your local area network (LAN) to the Internet. 1.1 | Features and Benefits • EZ 3-Click Installation Wizard - A new and improved way to install yo ...

  • SMC Networks SMC8013WG - page 5

    1.2 | Package Contents Before installing the EZ Connect™ Wireless Cable Modem Gatew ay , verify that you have the items listed under below. Also be sure that you have the necessary cabling. If any of the ite ms are missing or damaged, conta c t your local SMC distributor. • 1 - Wireless Cable Modem Gateway • 1 - Power adapter (9V/1A) • 1 - ...

  • SMC Networks SMC8013WG - page 6

    CHAPTER 2 | Getting to Know the Wireless Cable Modem Gateway The EZ Connect™ Wireless Cable Modem Gateway is the perfect all in one solution, for the home or business environment. This full-featured device has: • An approved DOCSIS 1.1 Cable modem • Advanced SPI Firewall Gateway • High-speed Turbo 11/22 M bps Wireless Access Point • Compr ...

  • SMC Networks SMC8013WG - page 7

    2.2 | Rear Panel Description Item Description Power Connect the included power adapter to this port. Reset Use this button to reset the power or restore the default factory settings. LAN 1-4 Four 10/100 Auto-sens ing switch po rts (RJ-45). Connect devices on your local area network to these ports (s uch as a PC, hub, or switch). USB Connect a USB C ...

  • SMC Networks SMC8013WG - page 8

    CHAPTER 3 | Installation The EZ Connect™ Wireless Cable Modem Gateway can be installe d in any location where you have cable internet access, and the cable inte rnet service provider has approved the EZ Connect™ Wireless Cable Modem Gatew ay. To confirm you meet these 2 criter ia points, please contact your local ISP. For general installation p ...

  • SMC Networks SMC8013WG - page 9

    3.2 | Basic Installation Procedure 1. Connect the LAN: You can connect the Wireless Cable Modem Gateway to your PC, or to a hub or switch. Run Ethernet cable from one of the L AN ports on the rear of the Wireless Cable Modem Gateway to your computer’s network adapter or to another network device. You can also connect the Wireless Cable Modem Gate ...

  • SMC Networks SMC8013WG - page 10

    CHAPTER 4 | Configuring your Computer The information outlined in this chapte r wi ll guide you through the configuration for the following Operating Systems: • Windows 95/98 • Windows Me • Windows 2000 • Windows XP • Apple Macintosh 4.1 | Configuring Windows 95/98/Me 1. Access your Network settings by clicking [Start], choose [Settings], ...

  • SMC Networks SMC8013WG - page 11

    4.2 | Configuring Windows 200 0 1. Access your Network settings by clicking [Start], choose [Settings], and then select [Control Panel] 2. In the Control Panel, locate and double- click the [Network and Dial-up Connections] icon 3. Locate and double-click the [Local Area Connection] icon for the Ethernet adapter that is connected to the Gateway. Wh ...

  • SMC Networks SMC8013WG - page 12

    4.3 | Configuring Windows XP The following instructions assume you are running Windows XP with the default interface. If you are using the Classic interface (where the icons and menus look like previo us Windows versions), please follow the instruct ions for Windows 20 00 outlined above. 1. Access your Network settings by clicking [Start], choose [ ...

  • SMC Networks SMC8013WG - page 13

    CHAPTER 5 | Configuring the Wireless Cable Modem Gateway After you have configured TCP/IP on a client computer, use a web browser to configure the EZ Connect™ Wireless Cable Modem Gateway. The Gateway can be config ured by any Java- supported browser including Internet Explorer 5.0 o r abo ve, or Netscape Navigator 5.0 or above. Using the web man ...

  • SMC Networks SMC8013WG - page 14

    5.3 | Accessing the Wireless Cable Modem Gatewa y’s Web Management To access the Wireless Cab l e M odem Ga teway’s web-based management screens, follow the steps below: 1. Launch your web-browser. NOTE : Your computer does not have to be ON LINE to configure the Wireless Cable Modem Gateway. 2. In the Address Bar, type: http://10.1.10.1 Note : ...

  • SMC Networks SMC8013WG - page 15

    CHAPTER 6 | Navigating the Web-based Administration The EZ Connect™ Wireless Cable Modem Gatewa y’s management interface allows you to configure both basic and advanced features an d options. Some of these advanced functions include: hacker attack detection, IP and MAC address filtering, intr usion detection, virtual server setup, virtual DMZ h ...

  • SMC Networks SMC8013WG - page 16

    6.4 | LAN From this section you can conf igure the following settings: • The private LAN settings, including the IP address of your Wireless Cable Modem Gateway • The IP Address Pool ran ge for DHCP clients • Enable or Disable the integrated DHCP server • Configure the DHCP Lease time for your DHCP clients To access the LAN configuration pa ...

  • SMC Networks SMC8013WG - page 17

    IP Address Pool A dynamic IP start address may be specified by the user, e.g. 10.1.10.1 (defaul t value). Once this start IP address has been assigned, IP addresses running from 10.1.10.10 to 10.1. 10.199 will be part of the dynamic IP address pool. I P addr esses from 10.1.10. 200 to 10.1.10.253 will be available as static IP addresses. Note : Do ...

  • SMC Networks SMC8013WG - page 18

    Predefined Service The Predefined Service option has a pul l-down menu with several popular Servi ce Appl ications, such as HTTP (80), FTP (20/21), and AIM/ICQ (5190). To configure the virtual server for a Predefined Service, follow the steps below : 1. Select the [Service] that you want to have access through the fire wall to your LAN from the pul ...

  • SMC Networks SMC8013WG - page 19

    2. Configure the Traffic or Da ta [T ype] that you want to forward 3. Set the [LAN Server IP] of the PC that you want this traffic/data r edirected to 4. You can also configure [Re mote IPs] option to allow acce ss to th is specific port fro m the WAN side. This can be configur ed for 3 different access types: a. Any IP Address [Any] – choose thi ...

  • SMC Networks SMC8013WG - page 20

    6.7 | Firewall The Wireless Cable Modem Gateway pro vide s a stateful inspection firew all (SPI), which is designed to protect against Deni al of Service (DoS) attacks when activated. Its purpose is to allow a private local area network (LAN) to be se curely connected to the Internet. To provide a flexible solution, the firewall section has the fol ...

  • SMC Networks SMC8013WG - page 21

    Configuring a Predefined Filtering Access Rule: 1. On the Side Navigation bar, click on [Firewall] then select [Access Control] 2. Under the Predefined Section, click on the [Add] button 3. On the next page, select the service that you want to block from the pull-down menu 4. Select the [LAN IPs] that you want this acce ss rule to apply to. Yo u ca ...

  • SMC Networks SMC8013WG - page 22

    Configuring a Customer Defined Filtering Access Rule: 1. On the Side Navigation bar, click on [Firewall] then select [Access Control] 2. Under the Customer Defined Section, click on the [Add] button 3. On the Customer Filter Configurati on p age, define a Name for the service/ap plicat ion that you want to block. Note : The Name is only for referen ...

  • SMC Networks SMC8013WG - page 23

    6.7.2 | Special Application Some applications, such as Internet gaming, vi deoconferencing, Internet telephony and others, require multiple connections. To access the Speci al Applicatio n configuration page, on the Si de Navigation bar, click on [Firewall] link and then click on the [Special Application] link. To enable this option, click th e [En ...

  • SMC Networks SMC8013WG - page 24

    8. When your configuration is complete, click the [Apply] button to save your changes and return to the main Special Application page. 6.7.3 | URL Blocking This section allows you t o control the content ne twork. This feature is good for both business and parents looking to con t rol the cont ent accessible from a web browser. To access the URL Bl ...

  • SMC Networks SMC8013WG - page 25

    6.7.4 | Schedule Rule This feature will block Internet content based on the URL blocking function f or PCs on your network based on the day and or time. Note : The URL/Keyword blocking featur e must be configured to use this schedule rule. To access the Schedule Rule configuration page, on the Side Navigation bar, click on [Firewall] link and then ...

  • SMC Networks SMC8013WG - page 26

    6.7.6 | DMZ Host (Demilitarized Zone) If you have a client PC that cannot run an Internet application properly from behind the firewall, then you can open the client up to unrestricted two-way Internet access. Enter the IP address of a DMZ host to th is s creen. Adding a client to the DMZ (Demilitarize d Zone) may expose your local network to a var ...

  • SMC Networks SMC8013WG - page 27

    6.9 | Status The Status screen displays WAN/LAN connect ion status, firmware, and hardwa re version numbers, illegal attempts to ac cess your network, as well as information on DHCP clients connected to your network. The Network log shows both firewall and network activity The DHCP Client Log shows the clients connect ed to the Wireless Cable Mode ...

  • SMC Networks SMC8013WG - page 28

    The Cable Modem System Event Log sh ows diagnostic informati on about your connection and cable system. The Cable Status page shows the users the in itialization proce ss the SMC8013W G has been through, and also includes the informat i on ab out the downstream channel and the upstream channel the modem is connected on. ...

  • SMC Networks SMC8013WG - page 29

    APPENDIX A | CLI Commands Command PING: "ping IP/FQDN x" Description: Pings the destination by IP or FQDN (full qualify domain name, e.g. www.yahoo.com ) for x times. Command TRACERT: "tracert IP/FQDN" Description: Trace the path to the destination IP or FQDN. ...

  • SMC Networks SMC8013WG - page 30

    Command SNIFF: "sniff [u|d|u+d] x [0|1]" Description: Sniff the upstream/downst ream/upstream & downst ream for x seconds and display them by original sn iff ing format (for 0) or Comcast’s format (for 1). Command NATSHOW: "natShow" Description: Display the existing NAT session log in the CM. ...

  • SMC Networks SMC8013WG - page 31

    Command ARP: "arp <[ether|cable]> <IP>" Description: If there is no parameter sp ecif ied for the ARP command, CM would display the current sys ARP table. Otherwis e, users must input the interfac e (ether or cable) and IP, and then CM would send out an ARP request to as k the MAC address of the specifie d IP in the correct in ...

  • SMC Networks SMC8013WG - page 32

    Command DHCPSHOW: "dhcpShow" Description: This command is used t o show the current dhcp lease info, including the I P, MAC and status (online/expired/released) of the pr ivate LAN. There is no parameter for this command. It will show the IP, MAC, and on-line for lease that renewed, released, and expired successfully. NOTE : If CPE has th ...

  • SMC Networks SMC8013WG - page 33

    APPENDIX B | Troubleshooting This appendix describes common p roblems you may encounter an d pos sible solutions to them. B.1 | Verify you are connected to the Wireless Cable Mode m Gateway If you are unable to access the Gateway’s web- based administration pages, then you may n ot be properly connected or configured. The screen shots in this sec ...

  • SMC Networks SMC8013WG - page 34

    B.3 | I have another IP Address displayed If you have another IP address listed, then the PC may not be configured for a DHCP connection. Please refer t o Chapter 4 | Config ure your Comput er for in formation. Once you have confirmed your computer is conf igured for DHCP, then please follow the steps below. 1. Open a DOS window as described above. ...

  • SMC Networks SMC8013WG - page 35

    B.4 | Pinging the Wireless Cable Modem Gatew ay To verifying Your TCP/IP Connect ion is configur ed properly and you are able to access the Wireless Cable Modem Gateway’s web-based ma n agement screens – you can use the ‘Ping’ command in DOS. To access the DOS dialog w indow please follow the steps below: 1. Click Start, then choose Run 2. ...

  • SMC Networks SMC8013WG - page 36

    B.5 | Symptom / Action Troublesho oting The Gateway can be easily monitored t hrough pa nel indicators to identify problems. Please refer to Chapter 2 – Section 2.0 | LE D Definit ions to confirm you have the correct LED status. If not, then refer to the symptoms and actions outlined below: SYMPTON: Power LED is OFF ACTION: • Check connections ...

  • SMC Networks SMC8013WG - page 37

    APPENDIX C | Technical Specifications Standards • 802.3 10BaseT Ethernet • 802.3u 100BaseTX F ast E t h ernet • 802.11b WAN Interface • F-type RF Connector LAN Interfaces • 4 – 10BASE-T/100BASE-TX RJ-45 ports • 1 – USB 1.1 Type B Connector • 1 – 801.11b Access P oint Wireless Interface • 11Mbps IEEE 8 02.11b Wireless LAN • S ...

  • SMC Networks SMC8013WG - page 38

    APPENDIX C | Compliances FCC Interference Statement This equipment has been tested and found to comp ly with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. Thes e limits are designed to provide reasonable protection against radi o interference in a comme rcial environment. This equip ment can generate, use and radiate ...

  • SMC Networks SMC8013WG - page 39

    APPENDIX D | Technical Support PHONE From U.S.A. and Canada (24 hours a day, 7 days a week) • (800) SMC-4-YOU • (949) 679-8000 • Fax: (949) 6 79-1481 From Europe (8:00 AM - 5:30 PM UK Time) • 44 (0) 118 974 870 0 • Fax: 44 (0) 118 974 8701 INTERNET E-mail addresses: • techsupport@smc.c om • european.techsupport@smc-europe.com Driver u ...

  • SMC Networks SMC8013WG - page 40

    SMC Networks, Inc. 38 Tesla Irvine, CA 92618 Rev. 1.0 – Comcast User SMC8013WG ...

メーカー SMC Networks カテゴリー Network Router

SMC Networks SMC8013WGのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- SMC8013WGの取扱説明書
- SMC Networksの製品カード
- パンフレット
- またはSMC Networks SMC8013WGの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、SMC Networks SMC8013WGの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、SMC Networks SMC8013WGの取り付け説明書、サービスマニュアル、簡易説明書、またはSMC Networks SMC8013WGのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、SMC Networks SMC8013WGの製品を使用するにあたって最も人気のある説明書を閲覧できます。

SMC Networks SMC8013WGデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSMC Networks SMC8013WGを使用するのを助ける技術的文書のことです。説明書は通常、全てのSMC Networks SMC8013WGユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

SMC Networksの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. SMC Networks SMC8013WGの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSMC Networks SMC8013WGの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。SMC Networks SMC8013WGに関してこのドキュメントで見つけることができる全てのヒントの目次
3. SMC Networks SMC8013WGデバイスの基本機能を使うにあたってのヒント。 SMC Networks SMC8013WGのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。SMC Networks SMC8013WGに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSMC Networks SMC8013WGのメーカー/サービスへの連絡先に関する情報。

SMC Networks SMC8013WGについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもSMC Networks SMC8013WGの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSMC Networks SMC8013WGで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)