Faria J1939の取扱説明書

36ページ 1.77 mb
ダウンロード

ページに移動 of 36

Summary
  • Faria J1939 - page 1

    MG2000 J1939 T achometer IS0224 rev . A ecr#61 15 04/2006 Owner ’ s Manual ...

  • Faria J1939 - page 2

    Index Description Normal Mode page 4 Contrast and Lighting page 4 T roll Control page 5 Displayed Functions page 5 Default screen 1 page 5 Default screen 2 page 5 Default screen 3 page 5 Default screen 4 page 6 Default screen 5 page 6 Default screen 6 page 6 Default screen 7 (Alarms) page 6 Figure 2 - Select Mode page 7 Figure 3 - LCD Display Scree ...

  • Faria J1939 - page 3

    Engine Emergency Stop page 22 Low Oil Pressure page 23 High System V oltage page 23 Low Oil Pressure page 23 Low System V oltage page 23 Low Coolant Level page 23 W ater in Fuel page 23 High Boost Pressure page 24 Rev Limit Exceeded page 24 Engine Emergency Stop page 24 High Engine T emp page 24 T able - J1939 MG2000 T achometer PGN’s Supported p ...

  • Faria J1939 - page 4

    This page left blank intentionally . ...

  • Faria J1939 - page 5

    F ar ia ® MG 20 00 J 1 939 T achometer M anual The F aria M G20 0 0 T ac hometer co mbines the features of an E CU ser ial bus gatewa y and several instr uments into one unit: • The tac hometer is analog in appearanc e but is dr iven by a stepper motor for digital ac curacy . • The high resoluti on L CD scre en displays informati on fo r many ...

  • Faria J1939 - page 6

    Pag e 3 Fuel Used 41˚21N 072˚06W Fuel Left 3650 RPM 17.5 GAL 50.0 GAL 5.5 GPH 325 Hours Fuel Inst 20.1 PSI Oil Pressure On Off T rim Sync P S T rans T emp 41˚21N 072˚06W T rans Gear 2 Forward 3650 RPM 330˚ F 200 PSI 325 Hours T rans Press 20.1 PSI Oil Pressure On Off T rim Sync P S Engine Load 41˚21N 072˚06W Boost Press 3650 RPM 330˚ F 5 PS ...

  • Faria J1939 - page 7

    Pag e 4 When t he “ Edit ” menus hav e been selec ted, pres s the “ M ode” but ton to return to “ No rmal ” mode. Press the “ D own” or “ Up” but tons to cycle bet ween the avail able “ Edit ” func tions. Press and hol d the “ Down” and “ Up” but tons for t wo (2) sec onds to selec t an “ Edit” f unctio n to chan ...

  • Faria J1939 - page 8

    Pag e 5 Di splayed F unc ti ons T ac hom ete r The t achometer is a d igit al instrument with the app earance of an analo g instr ument. The t achometer recei ves data direc tly from the ECU so n o set tings are normally required. The se t ting for the tac hometer dial range is s et at the factor y . A micr oproc essor c ontrolle d stepper motor mo ...

  • Faria J1939 - page 9

    Pag e 6 T rans T emp 41˚21N 072˚06W T rans Gear 2 Forward 3650 RPM 330˚ F 200 PSI 325 Hours T rans Press 20.1 PSI Oil Pressure On Off T rim Sync P S Scr een “ 4” T rans Gear Displays the c urrent gear as rec eived from the tr ansmission ECU. E xample Displayed as 0 for Neutral, 2 For ward. T rans T emp Displays the tr ansmission o il tempera ...

  • Faria J1939 - page 10

    Pag e 7 informat ion to be display ed ab out the alarm, also if more than one alarm is occ urr ing sc rolling is po ssible in t he “ VI EW ” mode by using t he “ Up” or “ Down” but tons. Internal alarm values c an be se t for “ Low F uel” . LCD Display Screens: Below is f low diagram of how to maneuver bet ween s creens and m odes. ...

  • Faria J1939 - page 11

    Pag e 8 1. Select Default Screen 2. Reset F uel Used 3. Set F uel T ank F ull 4. Set Amount of F ull 5. Organize User Screen s 6. Select Gauge Range 7. Select Fuel Sender 8. Select Display Units 9. Select Fuel T ank Size 10. Fuel T ank Calibrate 11. Low F uel Alarm 12. Select Self T est 13. Software ID & Revision ...

  • Faria J1939 - page 12

    Pag e 9 “Edit” M ode Screens for MG200 0 J 1 939 T achometer Ent er t he “ Edit” mode from “ Nor mal” mode by pre ssing and holding t he “ Mo de” but ton and the “ Up” button for appr o x. 2 sec onds T he f irst editable screen will app ear . By repe atedly pushing and releasing the “ D own” but ton, t he screens will advan ...

  • Faria J1939 - page 13

    Pag e 10 Instructions – Function Line Display Select Default Screen 1 Select Default Screen 2 3 Press and hold the “Up” and “Down” buttons for 2 seconds to enter the “Select Default Screen” function. Press “Up” or “Down” to select another function or “Mode” to return to “Normal” mode. (Display Screen 1 is the “Defaul ...

  • Faria J1939 - page 14

    Pag e 1 1 Set Fuel T ank Full 1 Set Fuel T ank Full 2 3 NOTE: In order to use the “Fuel Left” function, the owner must set this function when the fuel tank is filled or use the set amount of fuel below . In addition, if the “Set Fuel T ank Full” function is used, the “Fuel T ank Size” must be set correctly to the size of the fuel tank ...

  • Faria J1939 - page 15

    Pag e 12 Press and hold the “Up” and “Down” buttons for 2 seconds to enter the “Organize User Screens” function. Press “Up” or “Down” to select another function or “Mode” to return to “Normal” mode. Organize screen 1 Refer to the list of available functions later in this manual. 1 Set up Screen 1 2 3 Press and hold the ? ...

  • Faria J1939 - page 16

    Pag e 13 1 Set up Screen 1 2 3 Repeat for remaining screens (2, 3, 4, 5, & 6 ). Press “Up” or “Down” to select another function or “Mode” to return to “Normal” mode. Select Gauge Range 1 Select Gauge Range 2 3 Press and hold the “Up” and “Down” buttons for 2 seconds to enter the “Select Gauge Range” function. Press ? ...

  • Faria J1939 - page 17

    Pag e 14 Press “Up” or “Down” to scroll through the selections. When the correct choice is next to the selection arrow , Press and hold the “Up” and “Down” buttons for 2 seconds to save the selection and return to select another Dial. 1 Select Coolant T emp Dial 60-220 F > 100-250 F 145-240 F 2 3 4 5 6 Select V oltmeter Dial 1 Se ...

  • Faria J1939 - page 18

    Pag e 15 Press and hold the “Up” and “Down” buttons for 2 seconds to select “Boost Pressure Dial”. Press “Up” or “Down” to select another Dial. Press “Mode” to return to “Edit” mode. Press “Up” or “Down” to scroll through the selections. When the correct choice is next to the selection arrow , Press and hold the ...

  • Faria J1939 - page 19

    Pag e 16 Press and hold the “Up” and “Down” buttons for 2 seconds to select the “Pressure Units”. Press “Up” or “Down” to select another choice of “Units” Press “Up” or “Down” to scroll through the selections. When the correct choice is next to the selection arrow , Press and hold the “Up” and “Down” buttons ...

  • Faria J1939 - page 20

    Pag e 16 Pag e 17 Press and hold the “Up” and “Down” buttons for 2 seconds to enter the “Select Fuel T ank Size” function. Press “Up” or “Down” to select another function or “Mode” to return to “Normal” mode. Press and hold the “Up” and “Down” buttons for 2 seconds to select “Standard Fuel T ank Size”. 1 Sele ...

  • Faria J1939 - page 21

    Pag e 18 Select Fuel T ank Calibrate 1 Fuel T ank Calibrate 2 3 Press and hold the “Up” and “Down” buttons for 2 seconds to enter the “Fuel T ank Calibrate” function. Press “Up” or “Down” to select another function. Ensure that fuel tank is as empty as possible. Press and hold the “Up” and “Down” buttons for 2 seconds to ...

  • Faria J1939 - page 22

    Pag e 19 Press “Mode” to return to ““Edit”” mode, then press “Up” or “Down” to select another function or “Mode” again to return to “Normal” mode. Select Low Fuel Alarm 1 Low Fuel Alarm 2 3 NOTE: Setting the Low Fuel Alarm to 0.0 will disable the alarm. Press and hold the “Up” and “Down” buttons for 2 seconds to ...

  • Faria J1939 - page 23

    Pag e 20 Software Id and Revision 1 Software Id & Revision Minigateway J1939 PGFxxxx 2 3 4 5 6 A vailable Functions for Display in J1939 MG2000 T achometer Screens The functi ons listed below can be displa yed in the user conf igurabl e sc reens. All of the funct ions ma y not be ava ilable in your installatio n. If a function is selec ted fo r ...

  • Faria J1939 - page 24

    Pag e 21 This page left blank intentionally . ...

  • Faria J1939 - page 25

    Pag e 2 2 Alarm Mode The “Alarm” screen appears only if an alarm condition exists. The alarm condition may be a warning sent from the Engine, or Transmission ECU or a “Local” alarm such as “Low Fuel”. When an alarm condition occurs, the “Alarm Screen” will appear and the screens described below will be displayed. The descriptions be ...

  • Faria J1939 - page 26

    Pag e 23 Low Oil Pressur e PGN 65226 SPN 100 FMI 1 1 LOW OIL PRESSURE CRITICAL 2 3 4 High System V oltage PGN 65226 SPN 167 FMI 16 1 HIGH SYSTEM VOL T AGE W arning 2 3 4 5 Low Oil Pressur e PGN 65226 SPN 100 FMI 18 1 LOW OIL PRESSURE Amber W arning 2 3 4 5 Low Fuel Pressur e PGN 65226 SPN 94 FMI 18 1 LOW FUEL PRESSURE Amber W arning 2 3 4 5 Low Sys ...

  • Faria J1939 - page 27

    Pag e 24 Rev Limit Exceeded PGN 65226 SPN 190 FMI 0 1 REV LIMIT EXCEEDED CRITICAL 2 3 4 5 Engine Emergency Stop PGN 65226 SPN Any FMI N/A 1 ENGINE EMERGENCY STOP ! 2 3 4 High Engine T emp PGN 65226 SPN 1 10 FMI 0 1 HIGH ENGINE TEMP ! CRITICAL 2 3 4 5 ...

  • Faria J1939 - page 28

    Pag e 25 Thi s page l ef t bla nk inte ntio nall y . ...

  • Faria J1939 - page 29

    Pag e 26 MG2000 J1939 T achometer PGN T able Function PGN Bytes FMI Engine Speed 61444 4,5 Engine Percent Load 61443 3 Accelerator Pedal Position 61443 2 Ground Referenced Speed 65265 2,3 Fuel Flow (GPH) 65266 1,2 Oil Pressure 65263 4 Boost Pressure 65270 2 Battery Potential 65271 5,6 Coolant T emperature 65262 1 Engine Hours 65253 1,2,3,4 T ransmi ...

  • Faria J1939 - page 30

    MG2000 J1939 T achometer 6 5 4 3 2 1 7 8 9 10 1 1 12 1 2 3 6 5 4 Harness HN0587 J1939 T achometer Cable 4- pin connector 12- pin connector Pin A Red Pin B White Pin C Green Pin D Black & Sheild Pin 1 Red Faria Bu s Pin 2 White Faria Bus Pin 3 Green Faria Bus Pin 4 Black Faria Bus/Ground Pin 5 Violet Ignition(W ake) Pin 6 Pink Fuel Sender Pin 7 ...

  • Faria J1939 - page 31

    Pag e 28 Air T emp Sender Paddlewheel Sender White (Sender Signal) Black & Shield (Ground) 6 5 4 3 2 1 7 8 9 10 1 1 12 1 2 3 6 5 4 MG2000 Speedometer Harness HN0587 Speedometer Cable 1 2 3 4 5 6 7 8 9 10 1 1 12 12- pin connector Pin 1 Red Faria Bus Pin 2 White Faria Bus Pin 3 Green Faria Bu s Pin 4 Black Faria Bu s Pin 5 Not Used Pin 6 T an/Bla ...

  • Faria J1939 - page 32

    RED - IGNITION MG2000 J1939 T achometer 6 5 4 3 2 1 7 8 9 10 1 1 12 1 2 3 6 5 4 Harness HN0401 NMEA 0183 Cable 6- pin connector Pin 1 Not Used Pin 2 Not Used Pin 3 Red/ Whit e Pin 4 Red/ Blue Pin 5 Not Used Pin 6 Not Used 4 3 NMEA 0183-A NMEA 0183-B Red/ White Brown* Red (Ignition) White* Y e llow* Green (0183-A) Shield (Ground) Red/ Blue GREEN - 0 ...

  • Faria J1939 - page 33

    Pag e 3 0 MG2000 J1939 T achometer 6 5 4 3 2 1 7 8 9 10 1 1 12 1 2 3 6 5 4 W ater Pr essure Connection J1939 T achometer T a chometer to 2” Gauge Connection J1939T achometer F rom Engine TP1003 T ubing (or equivalent) PJ0018 Note: T o help reduce moisture in the gauges, be sure to install plug PJ0018 in all open connectors 2" Gauges HN0503 F ...

  • Faria J1939 - page 34

    N o tes: ...

  • Faria J1939 - page 35

    ...

  • Faria J1939 - page 36

    Copyright 2006 by the Thomas G. Faria Corporation, Uncasville CT No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the company . Faria® is the trademark of the Thomas G. Faria Corporation ...

メーカー Faria カテゴリー Automobile Parts

Faria J1939のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- J1939の取扱説明書
- Fariaの製品カード
- パンフレット
- またはFaria J1939の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Faria J1939の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Faria J1939の取り付け説明書、サービスマニュアル、簡易説明書、またはFaria J1939のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Faria J1939の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Faria J1939デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがFaria J1939を使用するのを助ける技術的文書のことです。説明書は通常、全てのFaria J1939ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Fariaの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Faria J1939の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははFaria J1939の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Faria J1939に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Faria J1939デバイスの基本機能を使うにあたってのヒント。 Faria J1939のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Faria J1939に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるFaria J1939のメーカー/サービスへの連絡先に関する情報。

Faria J1939についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもFaria J1939の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがFaria J1939で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)