日本語 dropdown-ico

Toshiba IK-HR1Sの取扱説明書

28ページ 1.39 mb
ダウンロード

ページに移動 of 28

Summary
  • Toshiba IK-HR1S - page 1

    For Customer Use Enter below the Serial # which is located on the bottom of the cabinet. Retain this information for future ref- erence. Model # IK-HR1S Serial # CMOS COLOR CAMERA INSTRUCTION MANUAL FCC NOTICE This equipment has been tested and f ound to comply with the limits for a Class A digital de vice, pursu- ant to P ar t 15 of the FCC Rules. ...

  • Toshiba IK-HR1S - page 2

    2 SAFETY PRECAUTIONS Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as fol ...

  • Toshiba IK-HR1S - page 3

    3 Disclaimer We disclaim an y responsibility and shall be held harmless for any damages or losses incurred b y the user in any of the f ollowing cases: 1. Fire, earthquake or any other act of God; acts by third parties; misuse b y the user , whether inten- tional or accidental; use under extreme operating conditions. 2. Malfunction or non-function ...

  • Toshiba IK-HR1S - page 4

    4 1 CAUTIONS ON USE AND INSTALLATION ............................................ 2 COMPONENTS ....................................................................................... 3 ITEMS CONTROLLED BY THE ON SCREEN DISPLAY ........................ 4 NAMES AND FUNCTIONS ...................................................................... 5 CON ...

  • Toshiba IK-HR1S - page 5

    5 8 BEFORE MAKING SERVICE CALL ........................................................ 9 SPECIFICATIONS .................................................................................. 10 EXTERNAL APPEARANCE DIAGRAM ................................................ 26 26 27 (7) Returning to factory settings ....................................... ...

  • Toshiba IK-HR1S - page 6

    6 1 Camera ................................................................................................................... 1 2 Accessorie s a Instruction manual ........................................................................................ 1 b Tripod mount ............................................................................... ...

  • Toshiba IK-HR1S - page 7

    7 1 8 2 4 6 7 5 9 Optical area HD-SDI terminal DISP button REMOTE terminal 3 FORMAT switch Mounting holes M3 Mounting holes M2 PAGE button [ Rear ] [ Front ] [ Bottom ] MENU UP button MENU DOWN button DATA UP (AWB) button DATA DOWN button DC IN 12V terminal 13 11 12 10 3. NAMES AND FUNCTIONS Optical area DISP button PAGE button MENU UP button MENU ...

  • Toshiba IK-HR1S - page 8

    8 IK-HR1S DC IN 12V Lens (option) 75 ohms coaxial cable (option) HD-SDI input HD-SDI (BNC connector) HD- capable monitor (option) DC power supply (option) AC adapter (AC-Y415A) Less than 11 mm [0.433”] 4 1 Standard Connection 4 CONNECTION 䊶 W hen connecting the cam era cables, be s ure to turn off the CMOS color camera and any other equipment c ...

  • Toshiba IK-HR1S - page 9

    9 4. 3A Connector Pi n A ssignments DC IN 12V terminal 1 +12V 2 +12V 3G N D 4G N D REMOTE terminal 1 2 3 TXD RXD GND Rear panel view 4 3 Connection on Rear Panel 㪩㪜㪤㪦㪫㪜 * For connecting to the REMOTE terminal, use a shielded cable. Connect the cable correctly or damage may occur to the camera. There are DC IN 12V, REMOTE terminals and H ...

  • Toshiba IK-HR1S - page 10

    10 㽲 Refer to the item "4. CONNECTION", and connect the equipment correctly. 㽳 Turn on the connec ted equipment and the cam era. 㽴 Aim the lens at the object, adjust th e lens iris ad justment, focus adjust ment, etc. 㽵 Refer to the item “5.1 W hite Balance”, make the adjustm ent. 㽶 㽲 㽳 㽴 㽵 㽶 Refer to the item s ? ...

  • Toshiba IK-HR1S - page 11

    11 Meaning Display A WB OK Automatic white balance adj ustment f inished correctly. A WB NG LEVEL LOW Automatic white balance adjustm ent cannot be perf ormed bec ause the video l evel is too low. Adjust the video level by increasing the illumination or opening the lens iris. A WB NG LEVEL HIGH Automatic white balance adjustm ent cannot be perf orm ...

  • Toshiba IK-HR1S - page 12

    12 (1) MANUAL(Manual gain) Gain adjustm ent is per formed on t he GAIN m enu. The adj ustment rang e is fr om 0 to 18dB in 1 dB steps. (Refer to the item “ 7.3 (2) (2.1) Changing gain in MANUAL mode”.) (2) OFF Gain is fixed at 0 dB. 52 G a i n Note: White, red, green, or blue dots may occur when the gain is increased. This is not a malfunction, ...

  • Toshiba IK-HR1S - page 13

    13 Available selections Item Preset value (Factory setting) MANUAL AUTO, MANUAL, SS MODE OFF *2 OFF *1 MANUAL, OFF MODE 1123/1125H 748/750H AWB AWB, ATW, MANUAL MODE AUTO level -100 0 100 0 AUTO peak : average 00 10 05 05 10 5 0 00 05 AUTO response speed 1 10 20 10 AUTO area PRESET A, PRESET B, PRESET C, PRESET D, PRESET E PRESET A MANUAL speed OFF ...

  • Toshiba IK-HR1S - page 14

    14 Various setti ngs can be control led on the unit b y using the on scr een menu disp layed on the monitor . The contents once set are memorized in the scene files (A, B, C, D, E) selected, so if the power turns off, it is unnecessary to set the values again when us ing the unit ne xt tim e. W hen the setting is perf ormed, select the m enu of the ...

  • Toshiba IK-HR1S - page 15

    15 䊶 Select the m enu to change the setting by referring to the item “7.1 Using the Menus ”. 䊶 When the [MENU UP], [MENU DOW N] buttons ar e pressed, the “ 㸢 ” on the scr een moves up and d own. Move the “ 㸢 ” to the item whose setting you wish to change. 1 SHUTTER 䋨 䋨 Electronic shutter 䋩 The e lectro nic sh utter h as th ...

  • Toshiba IK-HR1S - page 16

    16 (b) Changing the automatic shutter detectio n (ratio between peak and average v alue) 㽲 Move the “ 㸢 ” to PEAK/AVE by pressing [MENU UP], [MENU DOW N] buttons. 㽳 Select the ratio between peak and average value by pressing [DATA UP], [DATA DOW N] buttons. (c) Changing the automati c shutter response speed 㽲 Move the “ 㸢 ” to SPE ...

  • Toshiba IK-HR1S - page 17

    17 䋨 䋨 䋨 䋨 1 䋮 䋮 䋮 䋮 2 䋩 䋩 䋩 䋩 Changing the setting in MANUAL mode Shutter mode AUTO, M ANUAL, SS -- 1 SHUTTER -- <FILE A> Shutter speed setting MODE MANUAL OFF, 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, Shutter speed (OFF setting) 59.94 Hz setting : 1/60s 50 Hz setting : 1/50s MANUAL OFF 1/2000s, 1/4000s < MODE = MA ...

  • Toshiba IK-HR1S - page 18

    18 2 GAIN (Video gain) GAIN has two modes ; MANUAL, OFF. Move the “ ” to MODE, press the [DATA UP], [DATA DOWN], and select one of the two modes : MANUAL, OFF. In the OFF mode, gain is fixed to 0dB. 㸢 䋨 䋨 䋨 䋨 2 䋮 䋮 䋮 䋮 1 䋩 䋩 䋩 䋩 Changing gain in MANUA L mode -- 2 GAIN -- <FILE A> Gain mode MANUAL, OFF MODE MANUAL ...

  • Toshiba IK-HR1S - page 19

    19 (c) Changing color temperature setting 㽲 Move the “ 㸢 ” to C.TEMP by pressing [MENU UP], [MENU DOW N] buttons. 㽳 Select either 3200K or 5600K by pressing [DATA UP], [DATA DOW N] buttons. (a) Changing R PA INT 㽲 Move the “ 㸢 ” to R PAINT by pressing [MENU UP], [MENU DOW N] buttons. 㽳 Select the desired value of red paint by pr ...

  • Toshiba IK-HR1S - page 20

    20 䋨 䋨 䋨 䋨 3 䋮 䋮 䋮 䋮 2 䋩 䋩 䋩 䋩 Changing the setting in ATW(Automa tic Tracking White balance) mode White balance mode AWB, ATW, MANUAL -- 3 WHT BAL -- <FILE A> R PAINT (Red offset) ad justment -10 to 10 MODE R PAINT B PAINT (Blue offset) adjustment -10 to 10 Selecting R PAINT (Red offset) and B PAINT (Blue offset) make ...

  • Toshiba IK-HR1S - page 21

    21 䋨 䋨 䋨 䋨 3 䋮 䋮 䋮 䋮 3 䋩 䋩 䋩 䋩 Changing gain in MANUA L mode White balance mode AWB, ATW, MANUAL Red gain adjustment -100 to 100 -- 3 WHT BAL -- <FILE A> Blue gain adjustment -100 to 100 MODE R GAIN Color temperature setting 3200K, 5600K B GAIN C TEMP MANUAL 0 0 3200K (a) Changing the red gain 㽲 Move the “ 㸢 ” ...

  • Toshiba IK-HR1S - page 22

    22 䋨 䋨 䋨 䋨 4 䋩 䋩 䋩 䋩 PROCESS Gamma correcti on ON, OFF Gamma correction level setting -10 to 10 -- 4 PROCESS -- <FILE A> GAMMA ON/OFF GAMMA Detail gain setting -7 to 7 DTL GAIN Detail boost frequency HIGH, NORMAL, LOW M PED Master pedestal setting -128 to 127 DTL B.FREQ ON 0 0 0 HIGH 䋨 䋨 䋨 䋨 4 䋮 䋮 䋮 䋮 1 䋩 䋩 ...

  • Toshiba IK-HR1S - page 23

    23 䋨 䋨 䋨 䋨 4 䋮 䋮 䋮 䋮 3 䋩 䋩 䋩 䋩 Changing detail (outline) gain 㽲 Move the “ 㸢 ” to DTL GAIN by pressing [MENU UP], [MENU DOW N] buttons. 㽳 Select the desired value of the detail gain by pressing [DATA UP], [DATA DOW N] buttons. [ DATA UP ] ޓ The detail increas es. The detail decreas es. ޓ [ DATA DOWN ] 䋨 䋨 䋨 ...

  • Toshiba IK-HR1S - page 24

    24 䋨 䋨 䋨 䋨 5 䋩 䋩 䋩 䋩 MATR IX(Matrix color correction) Matrix color correction ON, OFF R e d h u e s e t t i n g -- 5 MATRIX -- <FILE A> Yellow hue setting R e d g a i n s e t t i n g MATRIX ON Yellow gain setting Green hue setting R HUE 0 Ye HUE 0 Cyan hue setting R GAIN 0 Ye GAIN 0 Green gain setting G HUE 0 Cy HUE 0 Cyan gai ...

  • Toshiba IK-HR1S - page 25

    25 䋨 䋨 䋨 䋨 6 䋩 䋩 䋩 䋩 OPTION -- 6 OPTION -- <FILE A> RS-232C baud rate 9600bps, 19200bps BAUD RATE 9600bps 䋨 䋨 䋨 䋨 6 䋮 䋮 䋮 䋮 1 䋩 䋩 䋩 䋩 Changing RS-232C baud rate 㽲 Move the “ 㸢 ” to BAUD RATE by pressing [MENU UP], [MENU DOW N] buttons. 㽳 Select either 9600bps or 19200bps by pressing [DATA UP], ...

  • Toshiba IK-HR1S - page 26

    26 Items to be checked Symptom No picture 䍃 Is power supplied correctly? 䍃 Is the lens iris adjusted correc tly? 䍃 Are the camera and video cab les connected correctly? 䍃 Is the shutter m ode set correc tly? 䍃 Is the monitor on, and in working condition? 䍃 Can the monitor (that you are using) accept the HD-SDI signal coming out of the c ...

  • Toshiba IK-HR1S - page 27

    27 Unit : mm [inch] 10. EXTERNA L APPEA RANCE DIA GRAM 4-M2 Depth 3 [0.118] 4-M3 Depth 3 [0.118] 44 [1.73] 44 [1.73] 26 [1.02] 25 [0.98] 5 [0.2] 56 [2.2] 25 [0.98] 25 [0.98] 26 [1.02] 22 [0.87] 5 [0.2] 26 [1.02] 13.4 [0.53] 78 [3.07] 2-M3 Depth 3 [0.118] [Front] [Rear] Camera T ripod mount Threaded hole 25 [0.98] 28 [1.1] 50.5 [1.99] 11 [0.43] 6 [0 ...

  • Toshiba IK-HR1S - page 28

    Limited Warranty – TOSHIB A CMOS Color Camera The Imaging Systems Division of T oshiba America Information Systems, Inc. ("ISD") makes the follo wing limited warranties with regard to this CMOS color Camera ("Product"). These limited w arranties e xtend to the Original End-User ("Y ou[r]"). One (1) Y ear Limited Warr ...

メーカー Toshiba カテゴリー Security Camera

Toshiba IK-HR1Sのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- IK-HR1Sの取扱説明書
- Toshibaの製品カード
- パンフレット
- またはToshiba IK-HR1Sの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Toshiba IK-HR1Sの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Toshiba IK-HR1Sの取り付け説明書、サービスマニュアル、簡易説明書、またはToshiba IK-HR1Sのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Toshiba IK-HR1Sの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Toshiba IK-HR1Sデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがToshiba IK-HR1Sを使用するのを助ける技術的文書のことです。説明書は通常、全てのToshiba IK-HR1Sユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Toshibaの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Toshiba IK-HR1Sの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははToshiba IK-HR1Sの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Toshiba IK-HR1Sに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Toshiba IK-HR1Sデバイスの基本機能を使うにあたってのヒント。 Toshiba IK-HR1Sのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Toshiba IK-HR1Sに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるToshiba IK-HR1Sのメーカー/サービスへの連絡先に関する情報。

Toshiba IK-HR1Sについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもToshiba IK-HR1Sの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがToshiba IK-HR1Sで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)