-
Honeywell HWC-BELT-WEH-QS - page 1
Belt Mount Sled Wearable Solution for Dolphin 70e Black Quick Start Guide HWC-BELT-WEH-QS Rev A 12/14 Aller à www.honeywellaidc.com pour le français. Vai a www.honeywellaidc.com per l'italiano. Gehe zu www.honeywellaidc.com für Deutsch. Ir a www.honeywellaidc.com para español. Para Português, acesse www.honeywellaidc.com . Перейти ...
-
Honeywell HWC-BELT-WEH-QS - page 2
Important Information About this Guide The Belt Mounted Sled is a device that is used with the wearable version of the Dolphin 70e Black (Honeywell Wearable Solution). For information a bout the Dolphin 70e Black, refer to the quick start packaged with the terminal. This document is designed to assist t he user who is wearing the wearable Dolphin 7 ...
-
Honeywell HWC-BELT-WEH-QS - page 3
Getting to Know the Bel t Mount Sled The sled encases theDolphin 70e Blac k including the touch panel and helps protect the terminal from impacts. Dolphin 70e Blac k Features Not Used When the Dolphin 70e Black is installed in the belt mounted sled, the following features are not available: • Touch screen display • Micro-USB port • Internal s ...
-
Honeywell HWC-BELT-WEH-QS - page 4
Removin g the Dolphin Black fr om the Sled 1. If the audio end cap is used, remove the audio cable. To prevent damage to the Dolphin 70e Black always unplug the audio cable before removing the end cap. 2. Slide the lock down to release the end cap. 3. Push up on the right side of the end cap. Do not attempt to remove the end cap without opening the ...
-
Honeywell HWC-BELT-WEH-QS - page 5
Removing the Battery 1. Remove the Dolphin 70e Black from the sled before changing the bat- tery. 2. Place the terminal in Suspend mode by p ressing and releasing the Power button . 3. Perform the steps illustrated below to remove the battery. 5. Slide the Dolphin 70e Black out of the sled. Use the notch in the bottom of the sled to push the Dolphi ...
-
Honeywell HWC-BELT-WEH-QS - page 6
Installing the Battery The Dolphin 70e Black mo del designed fo r use with the wearable sled uses battery part numbers BAT-STANDARD-02 (Li-ion 3.7 V, 6.179 watt hour) and BAT-EXTENDED-02 (Li-ion 3.7 V, 12.358 watt hour) manufactured for Honeywell International Inc. We recommend use of Honeywell Li-ion battery packs. Use of any non- Honeywell batter ...
-
Honeywell HWC-BELT-WEH-QS - page 7
T urning P ower On To turn the terminal On , press and release the Power button . Suspend Mode Press and release the Power button to toggle the terminal in or out of Suspend Mode. Because the display is hidden in the belt mount sled, observe the backlights for the Send, Home, Back and End keys. When the Dolphin 70e Black is on, these keys are backl ...
-
Honeywell HWC-BELT-WEH-QS - page 8
5. If the scan wedge icon is displayed, scan wedge is running. If the scan wedge icon is not displayed, Touch > Power Tools > ScanWedg e NGW . Tap Yes if a message is displayed about contin uing without a tethered scanner connected. Placing Dolphin 70e Blac k into the Sled 1. If the end cap is installed on the sled, slide the lock down to rel ...
-
Honeywell HWC-BELT-WEH-QS - page 9
3. Pull the end cap off the sled. 4. Make sure the USB door is closed. Rotate the door on the right side of the Dolphin 70e Black to close. 5. Press until the door is flush with the side of the terminal. 6. Slide the Dolphin 70e Black into the sled. ...
-
Honeywell HWC-BELT-WEH-QS - page 10
7. Make sure audio jack door is open. Pull the rubber door out and rotate the door 180º a s shown to prevent damage. 8. Make sure the audio cable is not installed in the end cap. 9. Slide the end cap straight onto the sled until it clicks in place. 10. Slide the lock closed to secure the end cap. ...
-
Honeywell HWC-BELT-WEH-QS - page 11
Attaching the Headset 1. Make sure the audio jack door is open as shown in the previous section. 2. Slide the 3.5mm audio connector into the end cap. 3. Attach the quick disconnect end of the headset adapter cable to the headset’s cable. 4. Slide the cable ends together until they click. Do not twist or bend the connectors. ...
-
Honeywell HWC-BELT-WEH-QS - page 12
Attach the Sled to the Belt Clip 1. Align the sled assembly with the belt clip and press on the sled until it latches onto the belt clip. Be sure to align tabs on the back of sled with the notches on the belt clip. 2. Slide the clip over a belt to wear the assembly. ...
-
Honeywell HWC-BELT-WEH-QS - page 13
T echnical Assistance Contact information for technical suppor t, product service, an d repair can be found at www.honeywellaidc.com . User Documentation For localized versions of this document, and to download the U ser’s Guide, go to www.honeywellaidc.com . Limited W arranty Refer to www.honeywellaidc.com/warranty_infor mation for your product? ...
Honeywell HWC-BELT-WEH-QSについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもHoneywell HWC-BELT-WEH-QSの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHoneywell HWC-BELT-WEH-QSで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。