-
Premier Mounts CPD10WALLARM - page 1
INST ALLA TION INSTRUCTIONS NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations Phone: (001).714.632.7100 Fax: (001).714.632.1044 EUROPE Swallow House, Shilton Industrial Estate, Shilton, Coventry , England CV79JY Phone: +44 (0) 2476 614700 Fax: +44 (0) 2476 614710 A ...
-
Premier Mounts CPD10WALLARM - page 2
CPD10W ALLARM Page 2 Visit Premier Mounts website at http://www .mounts.com Installation Instructions Contact Premier Mounts with any questions: (800) 368-9700 techsupport@mounts.com Contents Weight Capacity Maximum Projector Weight: 50lbs. THE W ALL STRUCTURE MUST BE CAP ABLE OF HOLDING FIVE (5) TIMES THE WEIGHT OF THE PROJECT OR. IF NOT , THEN TH ...
-
Premier Mounts CPD10WALLARM - page 3
CPD10W ALLARM Installation Instructions Visit Premier Mounts website at http://www .mounts.com Page 3 Parts List Installation T ools The following tools may be required, dependent upon your particular installation. These tools are not provided by Premier Mounts, but you can purchase them at your local hardware store. Y our Premier Mounts product is ...
-
Premier Mounts CPD10WALLARM - page 4
CPD10W ALLARM Page 4 Visit Premier Mounts website at http://www .mounts.com Installation Instructions Measure distance from center of lens to the top of the bracket (C). Add the distance from the ground to the top of the screen (A). Add the projector manufacturers recommended offset from the projector manual (B). Add the measurement ...
-
Premier Mounts CPD10WALLARM - page 5
CPD10W ALLARM Installation Instructions Visit Premier Mounts website at http://www .mounts.com Page 5 THE EXACT CENTER OF THE STUD MUST BE LOCA TED FOR CORRECT AND SAFE INST ALLA TION. Do NOT overtighten lag bolts when attaching the mount to the wall. Improper installation may result in personal injury or damage to property . Use a stud fi nder to ...
-
Premier Mounts CPD10WALLARM - page 6
CPD10W ALLARM Page 6 Visit Premier Mounts website at http://www .mounts.com Installation Instructions Use four (4) 5 16 ˝ x 3” lag bolts and four (4) fl at washers to mount the wall plate to the wooden studs. Use a ½” socket and socket wrench to fi nish this step. Do not overtighten the lag bolts. Insert and gently tap the w ...
-
Premier Mounts CPD10WALLARM - page 7
CPD10W ALLARM Installation Instructions Visit Premier Mounts website at http://www .mounts.com Page 7 Locate the mounting hook cutout on the top of the wall plate. T ilt the arm slightly and gently insert the mounting hooks into the mounting hook cutouts. Slowly lower and let the projector arm rest against the wall plate. If ...
-
Premier Mounts CPD10WALLARM - page 8
CPD10W ALLARM Page 8 Visit Premier Mounts website at http://www .mounts.com Installation Instructions Slide the extension arm into the open end of the CPD10W ALLARM (the front of the mount). Adjust length so that the center of the adjustable mounting bracket matches the throw distance calibration. Line up the mounting holes ...
-
Premier Mounts CPD10WALLARM - page 9
CPD10W ALLARM Installation Instructions Visit Premier Mounts website at http://www .mounts.com Page 9 Adjustable Mounting Bracket Installation (cont.) Secure and fi ngertighten two (2) M6 x 16mm security head screws. If the adjustable mounting bracket needs to be adjusted, the four (4) M6 x 12mm security screws may be loosened so that the ...
-
Premier Mounts CPD10WALLARM - page 10
CPD10W ALLARM Page 10 Visit Premier Mounts website at http://www .mounts.com Installation Instructions Step 2 Projector Bracket Installation Invert the projector and place it on a soft, fl at surface. Remove any foot levelers that might prevent bracket installation. Locate the mounting points on the projector . Plac ...
-
Premier Mounts CPD10WALLARM - page 11
CPD10W ALLARM Installation Instructions Visit Premier Mounts website at http://www .mounts.com Page 1 1 Please review the Operator ’s Manual that came packaged with your projector before attaching the upper mounting bracket. The correct throw distance (the distance from the projector to the screen) must be determined prior to mounting the project ...
-
Premier Mounts CPD10WALLARM - page 12
CPD10W ALLARM Page 12 Visit Premier Mounts website at http://www .mounts.com Installation Instructions The storage feature may be used to store electronic components. There is an accessible door on each side of the storage enclosure. It may be securely held shut with the use of four (4) M5 x 8mm security head screws. It may be easiest to pre-wire a ...
-
Premier Mounts CPD10WALLARM - page 13
CPD10W ALLARM Installation Instructions Visit Premier Mounts website at http://www .mounts.com Page 13 Electronic Components Cables CPD10W ALLARM Cable Opening Projector Connections Cable Opening The cable access holes are located at the end of the short throw mount and on the wall plate. Route the cables through one end of the CPD1 ...
-
Premier Mounts CPD10WALLARM - page 14
CPD10W ALLARM Page 14 Visit Premier Mounts website at http://www .mounts.com Installation Instructions Premier Mounts intends to make this manual accurate and complete. However , Premier Mounts makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in con ...
Premier Mounts CPD10WALLARMについてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもPremier Mounts CPD10WALLARMの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPremier Mounts CPD10WALLARMで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。