Graco 289604の取扱説明書

10ページ 1.96 mb
ダウンロード

ページに移動 of 10

Summary
  • Graco 289604 - page 1

    Instructions G40 Air Assisted Spray Gun 311937G EN For the application of architectural paints and coatings. For professional use only. Model: 288513, 289604 Maximum Working Pressure: 4000 psi (280 bar, 28 MPa) Maximum Air Working Pressure: 100 psi (7 bar, 0.7 MPa) IMPORTANT SAFETY INSTRUCTIONS. Refer to your sprayer instruction manual for Pressure ...

  • Graco 289604 - page 2

    Warnings 2 311937G Warnings The following Warnings are for the setup, use, grounding, maintenance and repair of this equipment. The exclamation point symbol alerts you to a general warning and hazard symbols refer to procedure-specific risks. Refer back to these Warnings. Additional, product-specific warnings may be found throughout the body of thi ...

  • Graco 289604 - page 3

    Warnings 311937G 3 PRESSURIZED ALUMINUM PARTS HAZARD Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical reaction and equipment rupture, and result in death, serious injury, and property damage. PERSONAL ...

  • Graco 289604 - page 4

    Warnings 4 311937G Pressure Relief Procedure Follow this Pressure Relief Procedure whenever instructed to relieve pressure, stop spraying, check or service equipment, or install or clean spray tip. 1. Lock trigger. Turn OFF power and turn pressure control to lowest pressure setting. 2. Unlock trigger. Hold gun against side of flushing pail. Trigger ...

  • Graco 289604 - page 5

    Warnings 311937G 5 Clearing a Clog 1. Relieve pressure . Lock trigger (1a). 2. Rotate tip (33) 180°. Unlock trigger (1a). Trigger gun into pail or onto ground to remove clog. 3. Lock trigger (1a). Rotate tip (33) 180° back to spray position. Spraying Refer to your Sprayer Instruction manual. The following instructions are for guns used with Graco ...

  • Graco 289604 - page 6

    Warnings 6 311937G 14. If the diffuser (5) was removed, trigger the gun while you reinstall the diffuser with the gun tool (30). Tighten the diffuser securely to obtain a good seal. Torque to 155-165 in-lb (18-19 N.m). When properly tightened, the flange will bottom out on the gun. 15. Install tip (33) and guard (6) on gun, page 4. 16. Using a soft ...

  • Graco 289604 - page 7

    Warnings 311937G 7 Fluid Tube Replacement (16) 1. Remove the air inlet fitting (17) using the gun tool (30) and remove the screw (20) using a 3/16 in. hex wrench. 2. Unscrew the fluid inlet fitting (25). Remove and clean or replace the inline fluid filter (24). 3. Unscrew fluid tube connector (16a) from fluid inlet. Carefully remove gasket (22). Fl ...

  • Graco 289604 - page 8

    Parts 8 311937G Parts ▲ Replacement Danger and Warning labels, tags, and cards are available at no cost. ◆ Included in Needle/Seat Repair Kit 255160 (purchase separately) † Included in RAC Guard Kit 288839 *Included in Seal Repair Kit 249422 (purchase separately) ‡ If you want to remove the filter, order 162863 to use as a seal in its place ...

  • Graco 289604 - page 9

    Technical Data 311937G 9 Technical Data *All readings were taken with fan valve fully closed, (full fan size) at 20 psi (140 kPa, 1.4 bar) and 100 psi (0.7 kPa, 7 bar) and at the assumed operator position. Sound Power tested to ISO 9614-2. Maximum Working Fluid Pressure..............................................................4000 psi (28 MPa, ...

  • Graco 289604 - page 10

    All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. For patent information, see www.graco.com/patents 2ULJLQDOLQVWUXFWLRQV This manual contains English. MM 311937 Graco Headquarters: Minneapolis ...

メーカー Graco カテゴリー Paint Sprayer

Graco 289604のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 289604の取扱説明書
- Gracoの製品カード
- パンフレット
- またはGraco 289604の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Graco 289604の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Graco 289604の取り付け説明書、サービスマニュアル、簡易説明書、またはGraco 289604のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Graco 289604の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Graco 289604デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがGraco 289604を使用するのを助ける技術的文書のことです。説明書は通常、全てのGraco 289604ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Gracoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Graco 289604の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははGraco 289604の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Graco 289604に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Graco 289604デバイスの基本機能を使うにあたってのヒント。 Graco 289604のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Graco 289604に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるGraco 289604のメーカー/サービスへの連絡先に関する情報。

Graco 289604についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもGraco 289604の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがGraco 289604で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)