Yale RS2の取扱説明書

18ページ 4.54 mb
ダウンロード

ページに移動 of 18

Summary
  • Yale RS2 - page 1

    13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB., .46 Kg. CAN) JOURNALS AND SEA T FOR HOOK KNOB MIXTURE (3/4 AND 1-1/2 T ON) TIP OF LE ...

  • Yale RS2 - page 2

    i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES. ORDERING INFORMA ...

  • Yale RS2 - page 3

    ii SAFETY PRECAUTIONS Each Y ale RS2 Manually Lever Operated Hoist is built in accordance with the specifications contained herein and at the time of manufacture complies with our interpretation of applicable sections of *ASME B30.21, *ANSI/ASME HST - 3M and the Occupational Safety and Health Act-1970. The safety laws for elevators and for dumbwait ...

  • Yale RS2 - page 4

    iii 1 CHOOSE THE RIGHT HOIST FOR THE JOB... Choose a Y ale Lever Hoist with a capacity f or the job. Know the capacities of your hoists and the weight of your loads. Then m atch them. The application, the size and type of load, t he attachments to be used and the period of use must also be taken into consideration i n selecting the right hoist for ...

  • Yale RS2 - page 5

    SPECIFICA TIONS The Y ale RS2 Lever Hoist is a highly versatile manually lever operated chain hoist that can be used to efficiently pull, lift, drag or stretch. S tandard features of the hoist include: • Alloy steel liftwheel to reduce chain wear . • Hoistaloy ® load chain for long and dependable service. • Grease lubricated, hardened, alloy ...

  • Yale RS2 - page 6

    2 Regardless of how the hoist is used, make sure that the upper hook is firmly attached to a support or anchor that has sufficient strength to hold several times the rated load of the hoist. Using the upper hook, attach the hoist to support. Be sure hoist is solidly held in the uppermost part of the hook arc and the latch is tightly against the hoo ...

  • Yale RS2 - page 7

    3 4. Pull on hook side and loose end side of load chain to make sure chain feeds freely into and out of the hoist. 5. Grasp unit by frame or upper hook and pull on end ring or lower hook to pull the chain through hoist to the length required to attach lower hook to load. Pull on end ring to take-up slack in chain and THEN LET GO OF END RING . 6. Ro ...

  • Yale RS2 - page 8

    4 load the unit, then check to be sure that the attachments to the hooks and load are firmly seated. Continue movement only after you are assured the load is free of all obstructions. The hoist has been designed for hand powered operation only . Do not use an extension on the lever . Lever pulls of 45 pounds (21kg.) on the 3/4 ton unit, 55 pounds ( ...

  • Yale RS2 - page 9

    5 Inspection of hoists is divided into two general classifications designated as “frequent” and “periodic”. Frequent Inspections These inspections are by the operator or other designated personnel. Frequent inspections are to be performed daily or prior to each use and they are to include the following: A. Check for free movement of the lev ...

  • Yale RS2 - page 10

    6 Also check chain for stretch using a vernier caliper as shown above. Select an unused, unstretched section of chain (usually at the loose end) and measure and record the length over 1 1 chain links (pitches). Measure and record the same length on a worn section of chain. Obtain the amount of stretch and wear by subtracting the measurement of the ...

  • Yale RS2 - page 11

    When lubricating parts adjacent to the brake, DO NOT use an excessive amount of lubricant which could seep onto the brake surfaces. EXTERIOR FINISH The exterior surface of the RS2 Lever Hoist has a durable, scratch resistant baked powder coating. Normally , the exterior surfaces can be cleaned by wiping with a cloth. However , if the finish is dama ...

  • Yale RS2 - page 12

    8 J. Assemble pawls (673-19) to pawl shaft s (673-22) and secure with snap rings (673-32). Place pawl springs (673-21) on pawl shaft s and insert these assemblies into frame (673-2). K. Slide friction hub (673-12) onto pinion (673-9) and place one friction disc (673-13) on top of friction hub. Assemble ratchet bushing (673-24) to ratchet (673-23). ...

  • Yale RS2 - page 13

    screw . If screw has been removed and replaced, always use new spots for locking. On the 3 ton unit, hang it in the vertical position. Making sure there are no twists in the chain, feed the end of chain thru the hook block (673-71) and around lower sheave (637-70). Secure end of chain to hoist hanger using the dead end pin (673-76). G . Assemble th ...

  • Yale RS2 - page 14

    KEY NO. P ART NAME P ART NUMBER NO. REQ’D. 3/4 TON 1 1/2 TON 3 TON 673-1 1 Liftwheel Bearing 88645 88442 673-2 1 Frame (includes 673-3 and (4) 673-4) 73304Y 73331Y 673-3 1 Pinion Bearing, frame end 88642 88439 673-4 4 Frame Pin 920720 73737 673-5 1 Gear Cover (includes 673-6 and 73305Y 73328Y 673-7) 673-6 1 Pinion Bearing, gear end 88644 88441 67 ...

  • Yale RS2 - page 15

    i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES. ORDERING INFORMA ...

  • Yale RS2 - page 16

    i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES. ORDERING INFORMA ...

  • Yale RS2 - page 17

    13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB., .46 Kg. CAN) JOURNALS AND SEA T FOR HOOK KNOB MIXTURE (3/4 AND 1-1/2 T ON) TIP OF LE ...

  • Yale RS2 - page 18

    13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB., .46 Kg. CAN) JOURNALS AND SEA T FOR HOOK KNOB MIXTURE (3/4 AND 1-1/2 T ON) TIP OF LE ...

メーカー Yale カテゴリー Personal Lift

Yale RS2のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- RS2の取扱説明書
- Yaleの製品カード
- パンフレット
- またはYale RS2の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Yale RS2の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Yale RS2の取り付け説明書、サービスマニュアル、簡易説明書、またはYale RS2のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Yale RS2の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Yale RS2デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがYale RS2を使用するのを助ける技術的文書のことです。説明書は通常、全てのYale RS2ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Yaleの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Yale RS2の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははYale RS2の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Yale RS2に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Yale RS2デバイスの基本機能を使うにあたってのヒント。 Yale RS2のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Yale RS2に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるYale RS2のメーカー/サービスへの連絡先に関する情報。

Yale RS2についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもYale RS2の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがYale RS2で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)