Cisco Systems OL-15491-01の取扱説明書

256ページ 1.97 mb
ダウンロード

ページに移動 of 256

Summary
  • Cisco Systems OL-15491-01 - page 1

    A-1 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 APPENDIX A CSG2 Command Reference This appendix documents the command s necessary to conf igure and monitor the CSG2. Oth er commands used with the CSG2 are documented in t he follo wing publication s: • Service and Application Modu ...

  • Cisco Systems OL-15491-01 - page 2

    A-2 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference • flags, page A-33 • idle (CSG2 content), page A-36 • idle (CSG2 service), page A-38 • inservice (CSG2 content), page A-40 • ip (CSG2 content), page A-41 • ip (iSCSI), page A-43 • ip csg ...

  • Cisco Systems OL-15491-01 - page 3

    A-3 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference • ip csg psd m argin, page A-93 • ip csg psd r etransmit, page A-94 • ip csg psd r etries, page A-95 • ip csg psd window , page A-97 • ip csg quota-ser ver , page A-98 • ip csg quota-serv er ...

  • Cisco Systems OL-15491-01 - page 4

    A-4 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference • ip csg snmp timer , page A-160 • ip csg subscriber , page A-161 • ip csg transport-type assign, page A-162 • ip iscsi target-pr o f ile, page A-163 • map, page A-165 • match header , page ...

  • Cisco Systems OL-15491-01 - page 5

    A-5 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference • show ip csg, page A-229 • show ip iscsi, page A-243 • show record-storage-module, page A-246 • snmp-server enable traps csg, page A-248 • subscriber -ip http-header forwarded-f or , page A-25 ...

  • Cisco Systems OL-15491-01 - page 6

    A-6 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference accounting accounting T o specify accounting and an optional cust omer string for a CSG2 polic y , use the accounting command in CSG2 polic y conf iguration mod e. T o remo ve accoun ting for a polic y ...

  • Cisco Systems OL-15491-01 - page 7

    A-7 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference activation activation T o specify the activation mode for a CS G2 Connection Duration service, use the activation command in CSG2 service con figur ation mode. T o restore the default set ting, use the n ...

  • Cisco Systems OL-15491-01 - page 8

    A-8 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference activation Related Commands Com ma nd De scr ip tio n ip csg service Conf igures a CSG2 conten t billing service, an d enters CSG2 service conf iguration mode. ...

  • Cisco Systems OL-15491-01 - page 9

    A-9 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference aoc append ur l aoc append url T o speci fy that the CSG2 is to app end the original URL to the redirect URL sent by the quota server on a Content Authori zation REDIRECT_URL respon se for use in Advice ...

  • Cisco Systems OL-15491-01 - page 10

    A-10 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference aoc confirm aoc confirm T o conf igure a tok en for use in Ad vice of Char ge (AoC) URL-re writing, u se the aoc conf irm command in CSG2 service conf iguration mode. T o remove the tok en, use the no ...

  • Cisco Systems OL-15491-01 - page 11

    A-11 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference aoc confirm Examples The followi ng exampl e specif ies a token for A dvice of Char ge (AoC) URL-re writing: ip csg service MOVIES aoc enable aoc confirm ?CSG_AOC_OK Related Commands Com ma nd De scr ip ...

  • Cisco Systems OL-15491-01 - page 12

    A-12 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference aoc enable aoc enable T o enable Advice of Char ge (AoC) URL-rewrit ing for the CSG2, use the aoc enable command i n CSG2 service configuration mode. T o rest ore the default setting, use th e no form ...

  • Cisco Systems OL-15491-01 - page 13

    A-13 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference aoc enable aoc conf irm Conf igures a tok en for use in Advice of Char ge (AoC) URL-re writing. ip csg service Configures a CSG2 content billing service, and enters CSG2 service conf iguration mode. Com ...

  • Cisco Systems OL-15491-01 - page 14

    A-14 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference basis basis T o specify the bill ing basis for a CSG2 conten t billing service, use the basis comma nd in CSG2 service confi guration mode. T o use the default billing basis, use the no form of this c ...

  • Cisco Systems OL-15491-01 - page 15

    A-15 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference basis Usage Guidelines For TCP billi ng, confi guring basis byte tcp allo ws counting of only TCP payload and e xclusion of ov erhead for netwo rk retransmission. W ith this option, the CSG2 e xcludes I ...

  • Cisco Systems OL-15491-01 - page 16

    A-16 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference basis Command Description ip csg service Conf igures a CSG2 conten t billing service, an d enters CSG2 service conf iguration mode. meter exclude svc-idle Excludes timers from the usage calculation. m ...

  • Cisco Systems OL-15491-01 - page 17

    A-17 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference block block T o force th e CSG2 to drop pack ets that do not match a conf igured billing policy , use the block command in CSG2 content conf iguration mode. T o restore the default beha vior , enabling ...

  • Cisco Systems OL-15491-01 - page 18

    A-18 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference class class T o specify a service class value, use the class command in CSG2 service config uration mode. T o remove the service class value, use the no form of this command. class value no class valu ...

  • Cisco Systems OL-15491-01 - page 19

    A-19 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference clear ip csg clear ip csg T o clear the CSG2, use the clear ip csg command in privil eged EXEC mode. clear ip csg {counters | sessions user [ application ] [ ip-addr ess ip-mask ] | user [ all | ip ip-a ...

  • Cisco Systems OL-15491-01 - page 20

    A-20 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference clear ip csg Command History Usage Guidelines By default, the CSG2 deletes 1000 User T a ble entries per second in response to the clear ip csg user all command. T o speci fy a dif ferent deletion rat ...

  • Cisco Systems OL-15491-01 - page 21

    A-21 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference clear ip iscsi statistics clear ip iscsi statistics T o clear current iSCSI statistics, use the clear ip iscsi statistics command in pri vile ged EXEC confi guration mode. clear ip iscsi statistics Synt ...

  • Cisco Systems OL-15491-01 - page 22

    A-22 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference clear record-storag e-module stats clear record-storage-module stats T o clear current record storage module (RSM) statistics, us e the clear record-storage-module stats command in pri vile ged EXEC c ...

  • Cisco Systems OL-15491-01 - page 23

    A-23 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference client-group (CSG2 content) client-group (CSG2 content) To reference a standard access list that is part of a CSG 2 content, use the client-group command in CSG2 content configuration mode. T o delete t ...

  • Cisco Systems OL-15491-01 - page 24

    A-24 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference client-group (CSG2 conte nt) access-list 99 deny 1.1.1.1 access-list 99 permit any Y ou can use next-hop with c lient gro ups as long as a given client group is always sent to the same next hop. Y ou ...

  • Cisco Systems OL-15491-01 - page 25

    A-25 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference content (CSG2 service) content (CSG2 service) T o conf igure a content and policy as a member of a CSG2 billing servi ce, and optionally to assign a weight to this content , use the content command in C ...

  • Cisco Systems OL-15491-01 - page 26

    A-26 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference content (CSG2 service) Related Commands Com ma nd Des cri pt io n ip csg content Configures content for CSG2 services, and enters CSG 2 content conf iguration mode. ip csg policy Defines a polic y for ...

  • Cisco Systems OL-15491-01 - page 27

    A-27 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference debug ip csg debug ip csg T o set the fl ags to obtain deb ugging output f or the va rious CSG2 components, use the deb ug ip csg command in pri vile ged EXEC mode. T o disable the debugging feature, us ...

  • Cisco Systems OL-15491-01 - page 28

    A-28 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference debug ip csg gtp quota-ser ver [ priority ] Generates debugg ing output for the GT P comp onent’ s interaction with the quota server . T o generate detailed deb u gging output for the GTP component? ...

  • Cisco Systems OL-15491-01 - page 29

    A-29 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference debug ip csg Defaults The CSG2 generates no debu gging output. Command Modes Pri vileged EXEC service [ detail ] Generates debugging output for th e su bscriber services component. T o generate detailed ...

  • Cisco Systems OL-15491-01 - page 30

    A-30 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference debug ip csg Command History Usage Guidelines T o see most b u t not all deb ugging outpu t, use the all option to turn on all deb ugging flags, and then use the no form of this command to e xclude de ...

  • Cisco Systems OL-15491-01 - page 31

    A-31 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference entries user idle entries user idle T o set the t ime after which entries for idl e subscr ibers are deleted from the CSG2 User T able, use the entries user idle command in CSG2 billing conf iguration m ...

  • Cisco Systems OL-15491-01 - page 32

    A-32 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference entries user idle • If Connection Duration Billing is enabled, you can use either the billing plan entry idle timer or the global entry id le timer to release a subscriber connection . Examples The ...

  • Cisco Systems OL-15491-01 - page 33

    A-33 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference flags flags T o speci fy IP , TCP , or wireless application protocol (W AP) flag bit mask s and v alues for CSG2 Prepai d Error Reimb ursement, use the flags command in CSG2 refund conf iguration mode. ...

  • Cisco Systems OL-15491-01 - page 34

    A-34 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference flags • 0x80: Connection terminated because o f lack of authorization f ailure. – 0: The connection w as not terminated as a result of an authorization fa ilure. – 1: The connection was t ermina ...

  • Cisco Systems OL-15491-01 - page 35

    A-35 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference flags Examples The following example sho ws how to set flags for IP , TCP , and W AP: ip csg refund COMPANY-REFUND flags tcp 43 00 flags ip 80 80 flags wap 04 Related Commands Com ma nd De scr ip tio n ...

  • Cisco Systems OL-15491-01 - page 36

    A-36 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference idle (CSG2 content) idle (CSG2 content) T o speci fy the minimum amount of time that the CSG2 maintains an idle cont ent connection, use t he idle command in CSG2 content conf igurat ion mode. T o res ...

  • Cisco Systems OL-15491-01 - page 37

    A-37 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference idle (CSG2 content) to quickly recognize t hat a session has ended and to gener ate billing records according ly . Other service-lev el features of the CSG2 that count sess ions (such as pass through mo ...

  • Cisco Systems OL-15491-01 - page 38

    A-38 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference idle (CSG2 service) idle (CSG2 service) T o specify th e minimum amount o f time that the CSG2 maintains a service with no subscriber sessions, use the idle command in CSG2 service conf iguration mode ...

  • Cisco Systems OL-15491-01 - page 39

    A-39 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference idle (CS G2 ser vice) Related Commands Com ma nd De scr ip tio n idle (CSG2 content) Specifies t he minimum amount of t ime that the CSG2 mai ntains an idle content conn ection. ip csg service Conf igur ...

  • Cisco Systems OL-15491-01 - page 40

    A-40 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference inservice (CSG2 content) inservice (CSG2 content) T o acti v ate the content serv ice on each CSG 2, use the inservice command in CSG2 content conf iguration mode. T o suspend the conten t service, us ...

  • Cisco Systems OL-15491-01 - page 41

    A-41 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip (CSG2 content) ip (CSG2 content) T o def ine the subset of Layer 3 and Layer 4 flo ws th at can be processed by th e CSG2 accounting services, use the ip command in CSG2 content conf iguration mode . ...

  • Cisco Systems OL-15491-01 - page 42

    A-42 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip (CSG2 content) Command Modes CSG2 content conf iguration Command History Usage Guidelines This command is required to place content in service. UDP ports 9200 and 9201 are well-kno wn Wireless Sess ...

  • Cisco Systems OL-15491-01 - page 43

    A-43 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip (iSCSI) ip (iSCSI) T o specify the IP address of an iSCSI targ et in the targ et interface prof ile on the CSG2, u se the ip command in iSCSI conf iguration mode. T o remov e the IP address conf igur ...

  • Cisco Systems OL-15491-01 - page 44

    A-44 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip (iSCSI) ip iscsi target -prof ile Creates an iSCSI profile for an iSCSI target on the CSG2, and enters iSCSI conf igurat ion mode. name (iSCSI) Specifies the name of an iSCSI target in the ta rget ...

  • Cisco Systems OL-15491-01 - page 45

    A-45 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg billing ip csg billing T o def ine a CSG2 billi ng plan, and to enter CSG2 bil ling conf iguration mode, use the ip csg billing command in global conf iguration mod e. T o delete the billin g pla ...

  • Cisco Systems OL-15491-01 - page 46

    A-46 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg bma ip csg bma T o conf igure the Billing Mediation Agents (BMAs) to wh ich the CSG2 i s to send billing records, u se the ip csg bma command in CSG2 global conf igurat ion mode. T o remove a B ...

  • Cisco Systems OL-15491-01 - page 47

    A-47 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg bma Usage Guidelines Y ou must specify the BMA l ocal port using the i p csg bma local-port command before you en ter the ip csg bma command. Accounting records are sent only to the agents identi ...

  • Cisco Systems OL-15491-01 - page 48

    A-48 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg bma activa te ip csg bma activate T o enable sup port for multiple acti ve Billing Mediation Agents (BMAs) , use the ip csg bma activa te command in CSG2 global co nf iguration mode. T o disabl ...

  • Cisco Systems OL-15491-01 - page 49

    A-49 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg bma activate Usage Guidelines Use this command to load-balance CD Rs among multiple acti ve BMAs. When the CSG2 uses multiple activ e BMAs, it sends all CDRs for a giv en user to a particular BMA ...

  • Cisco Systems OL-15491-01 - page 50

    A-50 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg bma kee palive ip csg bma keepalive T o def ine the Billing Mediatio n Agent (BMA) k eepali v e time interv al for the CSG2, use th e ip csg bma keep al ive command in global configurati on mod ...

  • Cisco Systems OL-15491-01 - page 51

    A-51 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg bma local-por t ip csg bma local-port T o def ine the port on which t he CSG2 communicates with the Billing Mediati on Agent (BMA), use the ip csg bma loca l-port command i n CSG2 global conf igu ...

  • Cisco Systems OL-15491-01 - page 52

    A-52 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg bma loca l-port Examples The followi ng exampl e sho ws ho w to speci fy local port 5555 as the port on which the CSG 2 listens for the CSG2 accounting service A1 : ip csg bma local-port 5555 R ...

  • Cisco Systems OL-15491-01 - page 53

    A-53 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg bma messages ip csg bma messages T o specify t he maximum number of general packet radi o service (GPRS) tunneling proto col prime (GTP’) messages that the CSG2 can buf fer for all Billing Medi ...

  • Cisco Systems OL-15491-01 - page 54

    A-54 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg bma messa ges By default, the CSG2 limits the rate at whic h GTP’ messages are read from t he PSD to 500 packets/second, and f rom the SAN to 167 pack ets /second. Ho we v er , you can change ...

  • Cisco Systems OL-15491-01 - page 55

    A-55 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg bma retransmit ip csg bma retransmit T o def ine the Billing Mediation Agent (BMA) re transmit time interv al for the CSG2 , use the ip csg bma ret r a ns m i t command in global configur ation m ...

  • Cisco Systems OL-15491-01 - page 56

    A-56 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg bma retrie s ip csg bma retries T o def ine the maximum n umber of Billing Med ia tion Agent (BMA) retries allo wed before the CSG2 determines that th e link has f ailed, use the ip csg bma ret ...

  • Cisco Systems OL-15491-01 - page 57

    A-57 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg bma retries Related Commands Com ma nd De scr ip tio n ip csg bma Defines the Bill ing Mediation Agents (BMAs) to which th e CSG2 is to send billing records ip csg ipc r etries Defines the maximu ...

  • Cisco Systems OL-15491-01 - page 58

    A-58 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg bma wind ow ip csg bma window T o def ine the Billin g Mediation Agent (BMA) transmit windo w size for the CSG2, use the ip csg b ma window command in glo bal conf iguration mode. T o reset t h ...

  • Cisco Systems OL-15491-01 - page 59

    A-59 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg case-sensitive ip csg case-sensitive T o specify whether to treat CSG2 header , method, and URL match patterns as case-sensiti ve, use the ip csg case-sensitive co mmand in global conf iguration ...

  • Cisco Systems OL-15491-01 - page 60

    A-60 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg content ip csg content T o conf igure content for CSG2 services, and to enter CSG2 cont ent conf iguration mode, use the ip csg content command in global conf iguration mode. T o delete the con ...

  • Cisco Systems OL-15491-01 - page 61

    A-61 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg content • subscriber -ip http-header forwarded-f or • vlan (CSG2 content) • vrf Y ou cannot chan ge characteristics for a content wh ile it is in service. If the content conf iguration does ...

  • Cisco Systems OL-15491-01 - page 62

    A-62 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg database ip csg database T o identify the database serv er that answers CSG2 user ID queries, use the ip csg database command in global conf iguration mo de. T o disable the database serv er , ...

  • Cisco Systems OL-15491-01 - page 63

    A-63 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg entries fragment ip csg entries fragment T o def ine the maximum n umber of entries in the CS G2 fr agment database, o r to defin e ho w long the CSG2 is to retain the entri es, use the ip csg en ...

  • Cisco Systems OL-15491-01 - page 64

    A-64 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg entries fragment ip csg entries user prof ile Specif ies the location from which th e CSG2 is to obtain the subscriber pr ofile and billing p lan when generating ent ries for th e CSG2 User T a ...

  • Cisco Systems OL-15491-01 - page 65

    A-65 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg entries sessi on user max ip csg entries session user max T o specify t he maximum number of entries all owed in the CSG2 session table, us e the ip csg entries session user max command in global ...

  • Cisco Systems OL-15491-01 - page 66

    A-66 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg entries sessio n user max ip csg psd margin Specif ies the maximum number of general packet radio s ervice (GPRS) tunneling prot ocol prime (GTP’) message s, beyond the size of the Billing Me ...

  • Cisco Systems OL-15491-01 - page 67

    A-67 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg entries user idle ip csg entries user idle T o specify ho w long the CSG2 is to retain ent ries in the C SG2 User T able, use the ip csg entries user idle command in global conf iguration mo de. ...

  • Cisco Systems OL-15491-01 - page 68

    A-68 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg entries user idle • If Connection Duration Billing is enabled, you can use either the billing plan entry idle timer or the global entry id le timer to release a subscriber connection . • Th ...

  • Cisco Systems OL-15491-01 - page 69

    A-69 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg entries user max ip csg entries user max T o speci fy the maximum number of entries allo wed in the CSG2 User T able, use the i p csg entries user max command in global conf iguration mo de. T o ...

  • Cisco Systems OL-15491-01 - page 70

    A-70 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg entries user max Related Commands Com ma nd Des cr ip tio n ip csg database Server that answers user ID queries. ip csg entries fragment Defines the maximum number of ent ries in the CSG2 fragm ...

  • Cisco Systems OL-15491-01 - page 71

    A-71 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg entrie s user profile ip csg entries user profile T o specify t he location from which the CSG2 i s to obtain the subscriber prof ile and bi lling plan when generating entrie s for the CSG2 User ...

  • Cisco Systems OL-15491-01 - page 72

    A-72 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg entries user profile Usage Guidelines K eep the following considerations in mind: • The VSA is remov ed from the RADIUS Access-Accept message onl y if remove is specified. Use the rem ove arg ...

  • Cisco Systems OL-15491-01 - page 73

    A-73 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg ipc crashdump ip csg ipc crashdump T o def ine the action t o be taken b y the CSG2 if an Interprocessor Communication (IPC) link f ails, use the ip csg ipc crashdump command in global co nfigu r ...

  • Cisco Systems OL-15491-01 - page 74

    A-74 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg ipc keepalive ip csg ipc keepalive T o def ine the Inter processor Communication (IPC) mod ule keepali v e time interv al for the CSG2, use the ip csg ipc keepalive command in gl obal confi gur ...

  • Cisco Systems OL-15491-01 - page 75

    A-75 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg ipc retransmit ip csg ipc retransmit T o def ine the Inter processor Communication ( IPC) retransmit time in terval for the CSG2, use the ip csg ipc retransmit command in global conf iguration mo ...

  • Cisco Systems OL-15491-01 - page 76

    A-76 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg ipc retries ip csg ipc retries T o def ine the maximum n umber of Interprocessor Co mmunication (IPC) retries allo wed before the CSG2 determines that the link has f ailed, use the ip csg ipc r ...

  • Cisco Systems OL-15491-01 - page 77

    A-77 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg iscsi drain delay ip csg iscsi drain delay T o def ine the del ay interv al, in seconds, before draining packets from the Storage Area Network (SAN) connected to the I nternet Small Computer Syst ...

  • Cisco Systems OL-15491-01 - page 78

    A-78 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg iscsi drain pa cket ip csg iscsi drain packet T o def ine the numb er of packets to be drained fro m the Storage Area Netwo rk (SAN) connected t o the Internet Small Computer Systems Interf ace ...

  • Cisco Systems OL-15491-01 - page 79

    A-79 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg iscsi drain p acket ip csg iscsi prof ile Specifies the Internet Small Computer Systems Interface (iSCSI) target to be used as back up storage for th e CSG2. ip iscsi target -prof ile Creates an ...

  • Cisco Systems OL-15491-01 - page 80

    A-80 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg iscsi profile ip csg iscsi profile T o specify the In ternet Sm all C omputer Systems Interface (iSCSI) target to be used as backup storage for the CSG2, use the ip csg iscsi p rof ile command ...

  • Cisco Systems OL-15491-01 - page 81

    A-81 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg map ip csg map T o def ine the CSG2 bil ling content f ilters (heade r , method, and URL maps), and to enter CSG2 map configuration mode, use the ip csg map command in global conf iguration mode. ...

  • Cisco Systems OL-15491-01 - page 82

    A-82 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg map ip csg map URLMAP match url */mobile/index.wml ! ip csg policy MAP-POLICY map HOSTMAP map URLMAP In this e xample, a flo w must match bo th HOSTMAP and URLMAP in order to match poli cy MAP- ...

  • Cisco Systems OL-15491-01 - page 83

    A-83 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg mode single-tp ip csg mode single-tp T o enable the CSG2 to use a si ngle traf fic processor (TP) instead of multiple TPs, use the ip csg mode single-tp comman d in global conf iguration mod e. T ...

  • Cisco Systems OL-15491-01 - page 84

    A-84 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg policy ip csg policy T o def ine a polic y for qualifying f low s for the CSG2 billing services, and t o enter CSG2 policy configuration mode, use the ip csg policy command in gl obal conf igur ...

  • Cisco Systems OL-15491-01 - page 85

    A-85 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg policy ip csg policy MAP-POLICY map HOSTMAP map URLMAP In this e xample, a flo w must match bot h HOSTMAP and URLMAP in order to match po licy MAP-POLICY . Examples The followi ng exampl e sho ws ...

  • Cisco Systems OL-15491-01 - page 86

    A-86 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg psd ip csg psd T o conf igure a Cisco Persistent Storage Device (PSD), use the ip csg psd command in global configuration mode. T o remove the PSD, use the no form of this command. ip csg ps d ...

  • Cisco Systems OL-15491-01 - page 87

    A-87 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg psd ip csg psd vrf PSDVRF 1.2.3.4 7777 Related Commands Com ma nd Desc rip ti on ip csg psd drain delay Defines the delay interv al, in seconds, before draining packets from the Cisco Persistent ...

  • Cisco Systems OL-15491-01 - page 88

    A-88 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg psd drain de lay ip csg psd drain delay T o def ine the delay in terval, in seconds, before draining p ackets from the Cisco Persistent St orage Device (PSD) when the Billing Mediati on Agent ( ...

  • Cisco Systems OL-15491-01 - page 89

    A-89 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg psd drain packe t ip csg psd drain packet T o def ine the number of packets to be drained from th e Cisco Persistent Storage De vice (PSD) per d rain delay interval when the Billing Mediatio n Ag ...

  • Cisco Systems OL-15491-01 - page 90

    A-90 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg psd keep alive ip csg psd keepalive T o def ine the Cisco Persisten t Storage Device (PSD ) keepali ve time interv al for the CSG2, use the ip csg psd keepaliv e command in global conf iguratio ...

  • Cisco Systems OL-15491-01 - page 91

    A-91 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg psd local-por t ip csg psd local-port T o conf igure the lo cal port on which th e CSG2 co mmunicates with the Ci sco Persistent Storage De vice (PSD), use the ip csg psd local-port command in gl ...

  • Cisco Systems OL-15491-01 - page 92

    A-92 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg psd local-po rt Related Commands Com ma nd Des cr ip tio n ip csg bma local-port Configures the local port on which th e CSG2 communicates with the Billing Mediation Agen t (BMA). ip csg psd Co ...

  • Cisco Systems OL-15491-01 - page 93

    A-93 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg psd margin ip csg psd margin T o specify t he maximum number of general packet radi o service (GPRS) tunneling proto col prime (GTP’) messages, beyond the si ze of the Billing Medi ation Agent ...

  • Cisco Systems OL-15491-01 - page 94

    A-94 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg psd retran smit ip csg psd retransmit T o def ine the Cisco Persistent Storage De vice ( PSD) retransmit time interv al for the CSG2, use t he ip csg psd retransmit comman d in global conf igur ...

  • Cisco Systems OL-15491-01 - page 95

    A-95 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg psd retries ip csg psd retries T o def ine the maxi mum number of Cisco Persistent Storage De vice (PSD) retries allowed before the CSG2 determines that the link has f ailed, use the ip csg psd r ...

  • Cisco Systems OL-15491-01 - page 96

    A-96 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg psd retries Related Commands Com ma nd De scr ip tio n ip csg bma retries Defines the maximum number of Billing Mediation Ag ent (BMA) retries allo wed before the CSG2 determi nes that the link ...

  • Cisco Systems OL-15491-01 - page 97

    A-97 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg psd window ip csg psd window T o def ine the Cisco Persis tent Storage De vice (PSD) transmit windo w size for the CSG2, use the ip csg psd window command i n global confi guration mode. T o rese ...

  • Cisco Systems OL-15491-01 - page 98

    A-98 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg quota-server ip csg quota-server T o conf igure the CSG2 quota servers t hat return billing qu ota v alues for subscribers, use the ip csg quota-server command in glo bal confi guration mode. T ...

  • Cisco Systems OL-15491-01 - page 99

    A-99 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg quota-server Command History Usage Guidelines For prepaid b illing, you must conf igure at least one quota server . Y o u can conf igure up to 1 0 quota serv ers. Each quota serv er must ha ve a ...

  • Cisco Systems OL-15491-01 - page 100

    A-100 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg quota-server a ctivate ip csg quota-server activate T o acti vate one or more quota serv ers, use the ip csg quota-server activ ate command in gl obal confi guration mode. T o deacti v ate quo ...

  • Cisco Systems OL-15491-01 - page 101

    A-101 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg quota-server keep alive ip csg quota-server keepalive T o def ine the quota server keepaliv e time interval for the CSG2, use the ip csg quota-serv er keepaliv e command in global conf iguration ...

  • Cisco Systems OL-15491-01 - page 102

    A-102 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg quota-server lo cal-port ip csg quota-server local-port T o conf igure the local port on which the CS G2 communicates with quota serv ers, use the ip csg quota-server local-port command i n gl ...

  • Cisco Systems OL-15491-01 - page 103

    A-103 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg quota-server local-po rt Examples The followi ng exampl e conf igures quota serv er local por t 6666: ip csg quota-server local-port 6666 Related Commands Com ma nd De scr ip tio n ip csg bma lo ...

  • Cisco Systems OL-15491-01 - page 104

    A-104 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg quota-server me ssages ip csg quota-server messages T o specify t he maximum number of general packet radi o service (GPRS) tunneling proto col prime (GTP’) messages that the CSG2 can buff e ...

  • Cisco Systems OL-15491-01 - page 105

    A-105 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg quota-server reassign ip csg quota-server reassign T o reassign subscribers to a dif ferent CS G2 quota s erver after a f ailure, use th e ip csg quota-server reassign command in global configu ...

  • Cisco Systems OL-15491-01 - page 106

    A-106 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg quota-server r etransmit ip csg quota-server retransmit T o def ine the quota serv er retransmit ti me interv al for the CSG2, use the ip csg quota-serv er retransmit command in global co nfig ...

  • Cisco Systems OL-15491-01 - page 107

    A-107 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg quota-server retries ip csg quota-server retries T o def ine the maxi mum number of quota serv er retrie s allowed before the C SG2 determines that the link has failed, use the ip csg quota-serv ...

  • Cisco Systems OL-15491-01 - page 108

    A-108 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg quota-server r etries Related Commands Com ma nd De scr ip tio n ip csg bma retries Defines the maximum number of Billing Mediation Ag ent (BMA) retries allo wed before the CSG2 determi nes th ...

  • Cisco Systems OL-15491-01 - page 109

    A-109 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg quota-server wind ow ip csg quota-server window T o def ine the quota serv er transmit win dow size for t he CSG2, use the ip csg quota-server window command in global conf iguration mod e. T o ...

  • Cisco Systems OL-15491-01 - page 110

    A-110 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg quota-server window ip csg psd window Def ines the Ci sco Persistent Storage De vice (PSD) transmit windo w size for the CSG2. ip csg quota-server Conf igures the CSG2 quo ta servers that retu ...

  • Cisco Systems OL-15491-01 - page 111

    A-111 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius ack error parse ip csg radius ack error parse T o enable th e CSG2 to generate a RADIUS resp onse to a RAD IUS Accounting Start Request or a RADIUS Accounting Interim Req uest when it enc ...

  • Cisco Systems OL-15491-01 - page 112

    A-112 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius a ck error pa rse Related Commands Com ma nd De scr ip tio n ip csg radius ack error user Enables the CSG2 to generate a RADIUS response to a RADIUS Accounting Start Request or a RADIUS ...

  • Cisco Systems OL-15491-01 - page 113

    A-113 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius ack erro r user ip csg radius ack error user T o enable th e CSG2 to generate a RADIUS resp onse to a RAD IUS Accounting Start Request or a RADIUS Accounting Interim Request when it encou ...

  • Cisco Systems OL-15491-01 - page 114

    A-114 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius a ck error user Related Commands Com ma nd De scr ip tio n ip csg radius ack error parse Enables the CSG2 to generate a RADIUS response to a RADIUS Accounting Start Request or a RADIUS ...

  • Cisco Systems OL-15491-01 - page 115

    A-115 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius correlation ip csg radius correlation T o en able RADIUS c orrelation pr ocessing by the CSG2, use the ip csg radius correlation command in global conf iguration mode. T o disable RADIUS ...

  • Cisco Systems OL-15491-01 - page 116

    A-116 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius corr elation Related Commands Com ma nd De scr ip tio n ip csg radius handoff Configures RADIUS ha ndof f support. ip csg radius start restart session-id D eletes an existing CSG2 User ...

  • Cisco Systems OL-15491-01 - page 117

    A-117 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius endpo int ip csg radius endpoint T o identify the CSG2 as an endpoint for RADIUS Accounting messag es, use the ip csg radius endpoint command in global conf iguration mod e. T o remo ve t ...

  • Cisco Systems OL-15491-01 - page 118

    A-118 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius endp oint Defaults The secr et-string is stored in pl ain te xt. If no VRF table is specif ied for the CSG2, th e CSG2 uses the global routin g table for RADIUS communication. If no VRF ...

  • Cisco Systems OL-15491-01 - page 119

    A-119 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius endpo int Y ou can also conf igure an optional RADIUS key . • If you conf igure a RADIUS k ey , the CSG2 parses and acts on a messag e only if the RADIUS Authenticator is correct. • I ...

  • Cisco Systems OL-15491-01 - page 120

    A-120 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius hand off ip csg radius handoff T o conf igure the CSG2 RADIUS handof f timer , use the ip csg radius handoff command in global confi guration mode. T o turn off the timer , use the no f ...

  • Cisco Systems OL-15491-01 - page 121

    A-121 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius handoff Related Commands Com ma nd De scr ip tio n ip csg radius ack error parse Enables the CSG2 to g enerate a RADIUS response to a RADIUS Accounting Start Requ est or a RADIUS Accounti ...

  • Cisco Systems OL-15491-01 - page 122

    A-122 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius monitor ip csg radius monitor T o specify t hat the CSG2 is to monitor the RADIUS flo ws to the specified serv er , use the ip csg radius monitor command in global conf iguration mode. ...

  • Cisco Systems OL-15491-01 - page 123

    A-123 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius monitor Command History Usage Guidelines Y o u can conf igure an option al RADIUS k ey . • If you conf igure a RADIUS k ey , the CSG2 parses and acts on a messag e only if the RADIUS Au ...

  • Cisco Systems OL-15491-01 - page 124

    A-124 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius monitor nas ip csg radius monitor nas T o specify t hat the CSG2 is to monitor t he RADIUS flo ws to the specif ied Net w ork Ac ce ss S er ve r ( N A S) , use the ip csg radius monitor ...

  • Cisco Systems OL-15491-01 - page 125

    A-125 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius on-off purge ip csg radius on-off purge T o specify the rate at which the C SG2 is to del ete CSG2 User T able ent ries in response to a RADIUS Accounting On o r RADIUS Accounti ng Off me ...

  • Cisco Systems OL-15491-01 - page 126

    A-126 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius pod attribute ip csg radius pod attribute T o specify t he RADIUS attrib utes and v endor -specif i c attrib ute (VSA) subattributes to be copied from the RADIUS Start message and sent ...

  • Cisco Systems OL-15491-01 - page 127

    A-127 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius pod attribute The CSG2 sa ves only t hose attrib utes or subattrib u tes which meet bot h of the follo wing criteria: • They are present i n the ne w RADIUS Accounti ng Start or RADIUS ...

  • Cisco Systems OL-15491-01 - page 128

    A-128 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius p od nas ip csg radius pod nas T o specify the N e t w or k A cce s s S e rv er ( N AS ) port to which the CSG2 is to send the Packet of Disconnect (PoD) message, and to specify t he ke ...

  • Cisco Systems OL-15491-01 - page 129

    A-129 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius pod na s Command History Usage Guidelines The PoD message is sent to the N AS IP address that is specif ied in the N AS-IP-Address attribute (4) in the RADIUS Accounting Start messag e. T ...

  • Cisco Systems OL-15491-01 - page 130

    A-130 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius pod timeout ip csg radius pod timeout T o specify t he number of times to retry the RADIUS P acket of Discon nect (PoD) message if it is not ackno wledged by means of an A CK message, a ...

  • Cisco Systems OL-15491-01 - page 131

    A-131 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radi us proxy ip csg radius proxy T o specify that th e CSG2 is to be a proxy for RADIUS messages, use the ip csg radius proxy co mmand in global conf iguration mode. T o stop the CSG2 from prox ...

  • Cisco Systems OL-15491-01 - page 132

    A-132 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius pr oxy Defaults The secr et-string is stored in plain te xt. The csg-sour ce-addr ess is set to csg-address . If no VRF table is specif ied for the CSG2, th e CSG2 uses the global routi ...

  • Cisco Systems OL-15491-01 - page 133

    A-133 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radi us proxy Command Modes Global conf iguration Command History Usage Guidelines A message sent to the specif ied csg-addr ess (and any port) is parsed an d then forwarded to the specif ied RA ...

  • Cisco Systems OL-15491-01 - page 134

    A-134 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius pr oxy Note If your network is designed t o check the authorizat ion strin g in RADIUS me ssages, we recommend that you enter a secr et-string . Additionally , if you co nfigu re the ip ...

  • Cisco Systems OL-15491-01 - page 135

    A-135 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius reaut hor ization attribute ip csg radius reauthorization attribute T o def ine the RADIUS att ribut es and VSA subattrib u tes to be monitored b y the CSG2, and to enable Roaming Service ...

  • Cisco Systems OL-15491-01 - page 136

    A-136 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius reauthorization attribute Examples The followi ng exampl e illustrates ho w to create a RADI US proxy point: ip csg radius reauthorization attribute 14 ip csg radius reauthorization att ...

  • Cisco Systems OL-15491-01 - page 137

    A-137 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius start restart session-id ip csg radius start restart session-id T o delete an e xisting CSG2 User T able entry for a sp ecific subscriber , and to cr eate a new entry for that subscriber ...

  • Cisco Systems OL-15491-01 - page 138

    A-138 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius start restart session-id Examples The followi ng exampl e sho ws ho w to enab le the ip csg radius start restart session-id command: ip csg radius start restart session-id 44 Related Co ...

  • Cisco Systems OL-15491-01 - page 139

    A-139 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius st op purge ip csg radius stop purge T o specify t he attrib ute that must be included i n the RADIUS Account ing Stop request in order for the CSG2 User T able e ntry to be de leted, us ...

  • Cisco Systems OL-15491-01 - page 140

    A-140 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius stop p urge Related Commands Com ma nd De scr ip tio n ip csg radius start restart session-id Deletes an existing CSG2 User T able entry for a specific subscriber , and creates a new en ...

  • Cisco Systems OL-15491-01 - page 141

    A-141 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius userid ip csg radius userid T o specify the RADIUS attribute used to e xtract the user identif ier from a RADIUS record, use the ip csg radius userid command in gl obal conf iguration mod ...

  • Cisco Systems OL-15491-01 - page 142

    A-142 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg radius us erid Related Commands Com ma nd Des cr ip tio n ip csg radius ack error parse Enables the CSG2 to generate a RADIUS re sponse to a RADIUS Accounting Start Request or a RADIUS Account ...

  • Cisco Systems OL-15491-01 - page 143

    A-143 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg recor ds format ip csg records format T o specify v ariable, f ixed, or combined (v ariabl e-single) call detail reco rd (CDR) format, use the ip csg re cords f ormat command in global confi gur ...

  • Cisco Systems OL-15491-01 - page 144

    A-144 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg redirect ip csg redirect T o redirect subscriber flo ws to an alternate IP address when the subscr iber’ s quota is exhaust ed, use the ip c sg re d ire c t command in global conf iguration ...

  • Cisco Systems OL-15491-01 - page 145

    A-145 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg redirect Examples The followi ng exampl e sho ws ho w to co nfigu re CSG2 redirects: ip csg redirect http http://server/topoff.html ip csg redirect sip sip: 1.2.3.4 ip csg redirect wap http://se ...

  • Cisco Systems OL-15491-01 - page 146

    A-146 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg refund ip csg refund T o specify t he CSG2 refund polic y to apply to the v arious services, and to enter CSG2 refund configuration mode, use the ip csg ref und command in global conf iguratio ...

  • Cisco Systems OL-15491-01 - page 147

    A-147 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg replicate ip csg replicate T o enable high a vailability (HA) state replic ation between redundant CSG2 systems, use the ip csg replicat e command in global con figur ation mode. T o disable sta ...

  • Cisco Systems OL-15491-01 - page 148

    A-148 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg replicate Related Commands Com ma nd De scr ip tio n rep l i ca t e Replicates the conne ction state for all connections to the CSG2 content servers on the standby system. ...

  • Cisco Systems OL-15491-01 - page 149

    A-149 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg report http header ip csg report http header T o def ine the in clusion of multiple HTTP request headers in the CSG2 HTTP_Header call detail record (CDR), use the ip csg report http header comma ...

  • Cisco Systems OL-15491-01 - page 150

    A-150 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg report http header ip csg report usage Enables CSG2 supplemental usage reporting to the quota serv er . ip csg report wap actual-pdu Specifies whether actual wirele ss application protocol (W ...

  • Cisco Systems OL-15491-01 - page 151

    A-151 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg report radius attribute ip csg report radius attribute T o specify the RADIUS attributes and VSA subattrib u tes to be copied from the RADIUS Start me ssage and sent to the Billing Med iation Ag ...

  • Cisco Systems OL-15491-01 - page 152

    A-152 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg report rad ius attribute The CSG2 sa ves only t hose attrib utes or subattrib u tes which meet bot h of the follo wing criteria: • They are present in the ne w RADIUS Accounting Start or RAD ...

  • Cisco Systems OL-15491-01 - page 153

    A-153 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg report smtp rfc2822 ip csg report smtp rfc2822 T o specify t hat the CSG2 is to include RFC 282 2 header T ag-Length -V alues (TL Vs) in Simple Mail T ransfer Protocol (SMTP) call detail records ...

  • Cisco Systems OL-15491-01 - page 154

    A-154 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg report usag e ip csg report usage T o enable CSG2 su pplemental usage r eporting to the quot a server , use the ip csg r eport usage command in global conf iguration mode. T o disable suppleme ...

  • Cisco Systems OL-15491-01 - page 155

    A-155 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg report usage Related Commands Com ma nd Des cr ip tio n ip csg report http header Defin es the inclusion of multip le HTTP request headers in the CSG2 HTTP_Header call detail record (C DR). ip c ...

  • Cisco Systems OL-15491-01 - page 156

    A-156 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg report wa p actual-pdu ip csg report wap actual-pdu T o specify w hether actual pro tocol data units (PDUs ) are to be reported in CSG2 wir eless application protocol (W AP) call detail record ...

  • Cisco Systems OL-15491-01 - page 157

    A-157 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg service ip csg service T o conf igure a CSG2 content billing service, and to enter CSG2 service conf iguration mode, use the ip csg service command in global conf igurat ion mode. T o turn off t ...

  • Cisco Systems OL-15491-01 - page 158

    A-158 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg service • basis • class • content (CSG2 service) • idle (CSG2 service) • meter exclude mms wap • meter exclude pause rtsp • meter exclude svc-idle • meter include imap • mete ...

  • Cisco Systems OL-15491-01 - page 159

    A-159 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg service ip csg refund Specifies the CSG2 refund policy to apply to the v arious services, and enters CSG2 refund conf iguration mode. meter exclude mms wap Excludes bytes for a W AP 1.x Multimed ...

  • Cisco Systems OL-15491-01 - page 160

    A-160 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg snmp timer ip csg snmp timer T o def ine Simple Ne twork Management Protocol (SNMP) t imers for lost CSG 2 records, use the ip csg snmp timer command in global conf iguration m ode. T o restor ...

  • Cisco Systems OL-15491-01 - page 161

    A-161 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg subscriber ip csg subscriber T o def ine a subscriber interface as a CSG2 subscriber interface, use the ip csg subscriber command in interface conf iguration mode. T o restore t he default setti ...

  • Cisco Systems OL-15491-01 - page 162

    A-162 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip csg transport-type assign ip csg transport-type assign T o classify data traff ic on the basis of its access path, use the ip csg transport-type assi gn command in global co nfiguration mode . T o ...

  • Cisco Systems OL-15491-01 - page 163

    A-163 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip iscsi target-profile ip iscsi target-profile T o create an i SCSI prof ile for an iSCSI tar get on the CSG2, and enter iSCSI conf iguration mode, use the ip iscsi target -profile command i n global ...

  • Cisco Systems OL-15491-01 - page 164

    A-164 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference ip iscsi target-profile Related Commands Com ma nd De scr ip tio n ip (iSCSI) Specifies the IP add ress of an iSCSI t arget in the target interface profile on the CSG2. ip csg iscsi drain delay Defin ...

  • Cisco Systems OL-15491-01 - page 165

    A-165 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference map map T o reference a header , method, or URL map that is part of a CSG2 billing policy , use the map command in CSG2 pol icy configuration mode. T o delete the reference, use the no form of this com ...

  • Cisco Systems OL-15491-01 - page 166

    A-166 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference map Examples The following e xample shows ho w to reference maps for CSG2 policies MO VIES and GAMES: ip csg policy MOVIES map HORROR map COMEDY ip csg policy GAMES map GAMES Related Commands Com ma ...

  • Cisco Systems OL-15491-01 - page 167

    A-167 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference match header match header T o specify a header match pattern for a CSG2 billing map, use the match header command in CSG2 map confi guration mode. T o delete the header match pattern, use the no form o ...

  • Cisco Systems OL-15491-01 - page 168

    A-168 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference match header Usage Guidelines This command is v alid only for HTTP and Session Ini tiation Protocol ( SIP). Y ou can use more than one mat ch header command in CSG2 map conf iguration mode to specify ...

  • Cisco Systems OL-15491-01 - page 169

    A-169 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference match header When configuring a map, k eep the follo wing considerations in mind: • Y o u cannot specify d if ferent ty pes of match patterns in a gi v en map. For example, a m ap can include one or ...

  • Cisco Systems OL-15491-01 - page 170

    A-170 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference match header match header User-Agent myagent The follo wing e xample sho ws ho w to specify SIP header match patt erns for map SIP-HDR1. In this exam ple, the head er match is TR UE only fo r Event p ...

  • Cisco Systems OL-15491-01 - page 171

    A-171 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference match method match method T o specify a meth od match pattern for a CSG2 billin g map, use the match method command in CSG2 map confi guration mode. T o delete the match pattern, use th e no form of th ...

  • Cisco Systems OL-15491-01 - page 172

    A-172 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference match method Y ou can specify up to 8192 match patterns. The follo wing table sho ws and describes the sp ecial characters that you can use in the method-name argument i n method match patterns. When ...

  • Cisco Systems OL-15491-01 - page 173

    A-173 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference match method In this e xample, a flo w must match bot h HOSTMAP and URLMAP in order to match po licy MAP-POLICY . Examples The followi ng exampl e sho ws ho w to speci fy a GET method match pattern for ...

  • Cisco Systems OL-15491-01 - page 174

    A-174 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference match url match url T o specify a URL match p attern for a CSG2 billing map, use the match url command in CSG2 map confi guration mode. T o delete the match pattern, use the no form of this command. ...

  • Cisco Systems OL-15491-01 - page 175

    A-175 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference match url • As a further e xample, by def ault the follo wing URLs do not match: http://www .cisco.com/index.html http://www .cisco.co m/INDEX.html Howe ver , if you have disabled case-sensiti vity b ...

  • Cisco Systems OL-15491-01 - page 176

    A-176 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference match url *.movies_drama.com/*.mpeg *.clips_comedy .com/*.mpeg *.clips_acti on.com/*.mpeg *.clips_drama.com/*.mpeg can be combined into the foll ow ing single pattern: *.(movies|clips)*?* (comedy|act ...

  • Cisco Systems OL-15491-01 - page 177

    A-177 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference match url When configuring a map, k eep the follo wing considerations in mind: • W e recommen d that you conf igure the URL match pattern during your maintenance windo w , or during off-peak hours. ? ...

  • Cisco Systems OL-15491-01 - page 178

    A-178 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter exclude control sip meter exclude control sip T o e xclude call control packets for a Session Initiation Prot ocol (SIP) session from the CSG2 usage calculation, use the meter exclude contr ol ...

  • Cisco Systems OL-15491-01 - page 179

    A-179 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter exclude control sip meter include imap Specif ies which Internet Message Access Protocol (IMAP) bytes are billed for by the CSG2 when doing prepaid debits. meter increment Specifies the increment ...

  • Cisco Systems OL-15491-01 - page 180

    A-180 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter exclude mms wap meter exclude mms wap T o e xclude bytes for a W A P 1.x Multimedia Messaging Service (MMS) session from the CSG2 usage calculation, use the meter exclude mms wap command in CSG ...

  • Cisco Systems OL-15491-01 - page 181

    A-181 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter exclude mms wap meter increment Specifies the increments for debi ting quota by t he CSG2 upon completion of a service conf igured for Service Duration Billing. meter initial Specifies the init i ...

  • Cisco Systems OL-15491-01 - page 182

    A-182 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter exclude network-init sip meter exclude network-init sip T o e xclude incoming Sessio n Initiation Protocol (SI P) transactions ( that is, those that are ini tiated from the network) from t he C ...

  • Cisco Systems OL-15491-01 - page 183

    A-183 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter exclude network-init sip meter initial Specifies the init ial quota debited b y the CSG2 from the balance at the beginnin g of a service when the service i s conf igured for Service Duration Bi l ...

  • Cisco Systems OL-15491-01 - page 184

    A-184 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter exclude pause rtsp meter exclude pause rtsp T o e xclude the Real T ime Streaming Protocol (R T SP) P A USE time from the CSG2 usage calculation, use the meter exclude pause rtsp command in CSG ...

  • Cisco Systems OL-15491-01 - page 185

    A-185 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter exclude pause rtsp meter exclude svc-idle Excludes the final service idle fr om the C SG2 usage calculation. meter include imap Specif ies which Inter net Messag e Access Protocol (IM AP) bytes a ...

  • Cisco Systems OL-15491-01 - page 186

    A-186 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter exclude svc-idle meter exclude svc-idle T o e xclude the final service idle from the CSG2 us age calculation, use the meter exclude svc-idle command in CSG2 service conf iguration mode. T o ret ...

  • Cisco Systems OL-15491-01 - page 187

    A-187 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter exclude svc-idle meter exclude network-init sip Excludes incoming Session Initiation Protocol (SI P) transactions (that is, those that are initiated from the network) from the CSG2 usage calculat ...

  • Cisco Systems OL-15491-01 - page 188

    A-188 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter include imap meter include imap T o specify which Internet Message Access Protocol (IMAP) bytes are billed for by the CSG2 when doing prepaid debits, use the meter include imap command in CSG2 ...

  • Cisco Systems OL-15491-01 - page 189

    A-189 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter include imap – BOD Y .PEEK[#. TEXT] – RFC822 – RFC822.TEXT • HEADER—If the bytes cannot be classified as BOD Y , then they are classified as HEADER if a f etch request or response is en ...

  • Cisco Systems OL-15491-01 - page 190

    A-190 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter include imap meter increment Specifies the increments for debi ting quota by the CSG2 up on completion of a service conf igured for Service Duration Billing. meter initial S pecifies the initia ...

  • Cisco Systems OL-15491-01 - page 191

    A-191 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter increment meter increment T o specify t he increments for debiting quo ta by the CSG2 up on completion of a service conf igured for Service Duration Billing, use the meter increment command in CS ...

  • Cisco Systems OL-15491-01 - page 192

    A-192 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter increment Examples The follow ing example sho ws how to co nfigu re quota debit increments for Service Duration Billing for the OFF_NET service. ip csg service OFF_NET meter increment 100 Relat ...

  • Cisco Systems OL-15491-01 - page 193

    A-193 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter initial meter initial T o speci fy the initial quota debi ted by the CSG2 from t he balance at the be ginning of a service wh en the service is configured for Service Duration Billing, use the me ...

  • Cisco Systems OL-15491-01 - page 194

    A-194 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter initial meter exclude mms wap Excludes bytes for a W AP 1.x Multimedia Messaging Service (MMS) session from the CSG2 usage calculation. meter exclude network-init sip Excludes incoming Session ...

  • Cisco Systems OL-15491-01 - page 195

    A-195 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter minimum meter minimum T o specify the minimum number of quadran s debite d by the CSG2 for a serv ice or session, use the meter minimum command in CSG2 servic e configur ation mode. T o return to ...

  • Cisco Systems OL-15491-01 - page 196

    A-196 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference meter minimum Examples The followi ng exampl e sho ws ho w to conf igure a minimum debit for the OFF_NET service. ip csg service OFF_NET meter minimum 60 Related Commands Com ma nd D esc ri pti on ip ...

  • Cisco Systems OL-15491-01 - page 197

    A-197 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference mode mode T o specify the mode for a CSG2 billing plan, use the mode command in CSG2 billing co nfigu ration mode. T o use the def ault mode, use the no form of this command. mode [ postpaid | prepaid ...

  • Cisco Systems OL-15491-01 - page 198

    A-198 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference mode tcp mode tcp T o specify the mode for CSG2 TCP sessions, use the mode tcp command in CSG2 content conf igurat ion mode. T o use the def ault mode, use the no form of this command. mode tcp { dat ...

  • Cisco Systems OL-15491-01 - page 199

    A-199 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference name (iSCSI) name (iSCSI) T o specify the name of an iSCSI target in the tar get prof ile on the CSG2, use th e name command in iSCSI configuration mode . T o remov e the IP address configuration, use ...

  • Cisco Systems OL-15491-01 - page 200

    A-200 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference name (iSCSI) ip iscsi target -prof ile Creates an iSCSI profile for an iSCSI target on the CSG2, and enters iSCSI conf igurat ion mode. port (iSCSI) Specifies the num ber of the port on which to list ...

  • Cisco Systems OL-15491-01 - page 201

    A-201 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference next-hop next-hop T o def ine a ne xt-hop IP address, use the next-hop command in CSG2 content conf iguration mod e. T o delete the nex t-hop IP address, use the no for m of this command. next-hop ip-a ...

  • Cisco Systems OL-15491-01 - page 202

    A-202 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference next-hop Related Commands Com ma nd Des cr ip tio n client-group (CSG2 content) Refe rences a standard access list that is pa rt of a CSG2 content. ip csg content Configures content for CSG2 services ...

  • Cisco Systems OL-15491-01 - page 203

    A-203 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference owner owner T o specify an identif ier or name for a CSG2 service owner , use the ow ner command in CSG2 service confi guration mode. T o remove the o wner ID or name, use the no form of this command. ...

  • Cisco Systems OL-15491-01 - page 204

    A-204 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference parse length parse length T o def i ne the maximum number o f Layer 7 bytes that the CSG2 i s to parse when attempting to assign a policy , use the parse length command in CSG2 content conf iguration ...

  • Cisco Systems OL-15491-01 - page 205

    A-205 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference parse protocol parse protocol T o def ine ho w the CSG2 is to parse traf fic for a content, use the parse pr otocol command in CSG2 content configuration mode. T o rest ore the default setting, use the ...

  • Cisco Systems OL-15491-01 - page 206

    A-206 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference parse protocol Related Commands Com ma nd Des cr ip tio n ip csg content Config ures content for CSG2 services, and en ters CSG2 content conf iguration mo de. parse length De fi ne s the maximum numb ...

  • Cisco Systems OL-15491-01 - page 207

    A-207 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference passthrough passthrough T o enable passth rough mode for a CSG2 service, use the passthrough command in CSG2 service confi guration mode. T o disable passthrough mode, use the no form of this command. ...

  • Cisco Systems OL-15491-01 - page 208

    A-208 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference pending pending T o set the pending connection timeout, u se the pending command in CSG2 content conf igurati on mode. T o restore the def ault, use the no form of th is command. pending timeout no p ...

  • Cisco Systems OL-15491-01 - page 209

    A-209 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference policy (CSG2 content) policy (CSG2 content) To reference a CSG2 billing policy , use the policy command in CSG2 content conf iguration mode. To delete a policy reference, us e t h e no form of this com ...

  • Cisco Systems OL-15491-01 - page 210

    A-210 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference policy (CSG2 content) Examples The followi ng exampl e sho ws ho w to referen ce policies with and with out priorities: ip csg content MOVIES policy COMEDY policy HORROR ip csg content MUSIC policy H ...

  • Cisco Systems OL-15491-01 - page 211

    A-211 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference port (iSCSI) port (iSCSI) T o speci fy the number of the p ort on which to listen for iSCSI traf f ic in the iSCSI tar get interface profile on the CSG2, use the port command in iSCSI conf iguration mo ...

  • Cisco Systems OL-15491-01 - page 212

    A-212 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference port (iSCSI) ip iscsi target -prof ile Creates an iSCSI profile for an iSCSI target on the CSG2, and enters iSCSI conf igurat ion mode. name (iSCSI) Specifies the name of an iSCSI target in the ta rg ...

  • Cisco Systems OL-15491-01 - page 213

    A-213 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference reauthorization threshold reauthorization threshold T o conf igure the CSG2 reauthorization threshold, u se the r eauthorization threshold command in CSG2 service configuration mode. T o rest ore the d ...

  • Cisco Systems OL-15491-01 - page 214

    A-214 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference reauthorization threshold Examples The followi ng exampl e sho ws ho w to speci fy a reauthorization t hreshold of 75 quad rans: ip csg service A1 reauthorization threshold 75 Related Commands Com ma ...

  • Cisco Systems OL-15491-01 - page 215

    A-215 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference reauthorization timeout reauthorization timeout T o specify t he CSG2 reauthorization ti meout, use the r eauthorization timeout command in CSG2 service configuration mode. T o rest ore the default set ...

  • Cisco Systems OL-15491-01 - page 216

    A-216 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference reauthorization timeo ut Examples The followi ng exampl e sho ws ho w to specify an i nitial reauthorization timeout o f 10 seconds and a maximum reauthorization timeout of 20 secon ds: ip csg servic ...

  • Cisco Systems OL-15491-01 - page 217

    A-217 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference records delay records delay T o specify t he delay before the CSG2 is to send the HTTP Stati stics CDR, use the r ecords delay command in CSG2 content conf igurat ion mode. T o restore the default sett ...

  • Cisco Systems OL-15491-01 - page 218

    A-218 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference records granularity records granularity T o specify t he granularity at which CSG2 billing call detail records (CD Rs) are to be generated, use th e reco rds granularity command in CSG2 service conf ...

  • Cisco Systems OL-15491-01 - page 219

    A-219 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference records granularity Command History Usage Guidelines Y ou can use this comman d to reduce the number of records for services for which tr ansaction-le v el billing is not required. F o r exampl e, if a ...

  • Cisco Systems OL-15491-01 - page 220

    A-220 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference records intermediate records intermediate T o enable th e generation of CSG2 in termediate billing reco rds, use the r ecords intermediate command in CSG2 content conf iguration mode . T o disable th ...

  • Cisco Systems OL-15491-01 - page 221

    A-221 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference records intermediate Command History Usage Guidelines The CSG2 supports intermediate bil ling for FTP , HTTP , IP , SIP , TCP , and UDP . The CSG2 does not suppor t intermediate billing for W AP or e-m ...

  • Cisco Systems OL-15491-01 - page 222

    A-222 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference refund refund T o specify the refund poli cy for a CSG2 prepaid service, use the refund command in CS G2 service confi guration mode. T o disable the refund policy , use the no form of this command. ...

  • Cisco Systems OL-15491-01 - page 223

    A-223 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference replicate replicate T o replicate the connection state fo r all connecti ons to the CSG2 cont ent servers on the standb y system, use the replicate command in CSG2 content configurat ion mode. T o disa ...

  • Cisco Systems OL-15491-01 - page 224

    A-224 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference replicate Related Commands Com ma nd De sc rip ti on ip csg content Configures content for CSG2 serv ices, and enters CSG2 content configuration mo de. ip csg replicat e Enables state replication bet ...

  • Cisco Systems OL-15491-01 - page 225

    A-225 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference retcode retcode T o specify t he range of applicatio n return codes for which the CSG2 refunds quota f or Prepaid Error Reimbursement, use the retc o de co mmand in CSG2 r efund conf iguration mode. T ...

  • Cisco Systems OL-15491-01 - page 226

    A-226 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference retcode Command History Usage Guidelines The CSG2 supports return co de-based refunding for all pro tocols except R TSP . The return codes are protocol-specific. For I MAP , keep in mind th e follo w ...

  • Cisco Systems OL-15491-01 - page 227

    A-227 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference sami rate all sami rate all T o specify t he bit rate limit to be us ed by the Serv ice and Application Module for IP (SAMI) for each Po werPC’ s (PPC’ s) traff ic, CSG2 use the sami rate all comma ...

  • Cisco Systems OL-15491-01 - page 228

    A-228 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference servic e service T o associate a service with a CSG 2 billing plan, use the service command in CSG2 b illing co nf iguration mode. T o remov e the association, use the no form of this command. servic ...

  • Cisco Systems OL-15491-01 - page 229

    A-229 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg show ip csg T o disp lay information about t he CSG2, use the show ip cs g command in pri vileged EXEC mode. show ip csg { billing [plan billing-p lan-name ] | bma | content [name content-n ...

  • Cisco Systems OL-15491-01 - page 230

    A-230 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg rep l i ca t e Displays information about only high a v ailability (HA) sessions. smtp Displays information abo ut only the Simple Mail T ransfer Protocol (SMTP) sessions. user Displays i ...

  • Cisco Systems OL-15491-01 - page 231

    A-231 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg Command Default None Command Modes Pri vileged EXEC Command History Usage Guidelines In the output for the sho w ip csg conten t command, the CSG2 might truncate some f ields, such as th e ...

  • Cisco Systems OL-15491-01 - page 232

    A-232 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg TCP TCP 0.0.0.0/0:0 ALL INSTALLED WAPCONN UDP 0.0.0.0/0:9201 ALL INSTALLED WAPCONNLESS UDP 0.0.0.0/0:9200 ALL INSTALLED The following example shows ho w to display d etailed statistics an ...

  • Cisco Systems OL-15491-01 - page 233

    A-233 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg response sends = 11252888, response send failures = 0 received from peer unreliable = 51626, reliable = 97224994, request = 11254924, response = 1667364 unsupported ipc port = 0, unsupporte ...

  • Cisco Systems OL-15491-01 - page 234

    A-234 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg Denied (per second) = 5065121 (0) Rate: Limit 1800 per traffic processor Denied (per second) = 25193314 (0) Session Create Allowed (per second) = 49802545 (1872) IPC: Queue Depth Toleranc ...

  • Cisco Systems OL-15491-01 - page 235

    A-235 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg out of order = 412 out of order get = 384 out of order flushed = 28 retransmitted = 485 set aside = 9504977 set aside get = 9418614 set aside flushed = 86222 term closed = 1362349 term RST ...

  • Cisco Systems OL-15491-01 - page 236

    A-236 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg alloc failures = 0, no standby on CG failure = 0 packets sent = 14217667, received = 122537872, failed acks = 0 packets dropped = 0, rejected = 0, retransmits = 1069136, no ip = 0 packets ...

  • Cisco Systems OL-15491-01 - page 237

    A-237 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg invalid message size = 0, unable to find client = 0 unable to send to client = 0, unable to send to server = 0 unable to find proxy blk = 0 proxy CSG ip = 10.18.28.34, server ip = 11.18.28. ...

  • Cisco Systems OL-15491-01 - page 238

    A-238 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg CSG OTHER Stats: total sessions = 40344, alloc fail = 0 aoc fail = 0, frags = 0, aborts = 6521, init fail = 2513 reports = 39937, standby no uid = 0, errors = 0 CSG HTTP Stats: sess = 180 ...

  • Cisco Systems OL-15491-01 - page 239

    A-239 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg Aoc: reqs = 47923, drop = 14006, redir = 6778, fail = 0 Drops: err = 0, quota = 14290, block = 0, queue = 2521 Timer Stats: tmr_intialized = 1 tmr_ticks = 7160 tmr_starts = 4067359 tmr_stop ...

  • Cisco Systems OL-15491-01 - page 240

    A-240 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg The follo wing e xample sho ws ho w to display information abou t the quota serv er: Router# show ip csg quota-server charging gateway vrf priority state --------------------------------- ...

  • Cisco Systems OL-15491-01 - page 241

    A-241 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg The follo wing table lists and d escribes the possible states fo r the show ip csg sessions user command: State 1 Description CSG_SSVC_ST A TE_INIT The sessi on has been created b ut no pac ...

  • Cisco Systems OL-15491-01 - page 242

    A-242 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip csg The follo wing e xample displays detailed information about th e subscriber at 10.18.28.0/24 : Router# show ip csg users 10.18.28.0/24 detail 10.18.28.11 C-10.18.28.11 sessions = 1, traff ...

  • Cisco Systems OL-15491-01 - page 243

    A-243 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip iscsi show ip iscsi T o disp lay information abou t the iSCSI, use the sho w ip iscsi command in pri vileged EXEC mode. show ip iscsi {name | session [ session-id ] [ detail ] | stats [ detail ...

  • Cisco Systems OL-15491-01 - page 244

    A-244 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip iscsi The follo wing e xample sho ws output from the show ip iscsi stat s command: Router# s how ip iscsi stats iSCSI Stats: Login Requests - 2, Login Responses - 2 Logout Requests - 0, Logou ...

  • Cisco Systems OL-15491-01 - page 245

    A-245 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show ip iscsi The follo wing e xample sho ws output from the show ip iscsi tar get command: Router# show ip iscsi target Target Profile= TARGET_LINUX IN_USE Target: name= iqn.2002-10.edu.unh.iol.iscsi. ...

  • Cisco Systems OL-15491-01 - page 246

    A-246 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show record -storage-modu le show record-storage-module T o disp lay information about the record sto rage module (RSM), use the show r ecord-storage-module command in pri vile ged EXEC mode. show r ...

  • Cisco Systems OL-15491-01 - page 247

    A-247 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference show record-storage -module Number of drives = 5, Read drive = sda3, Write drive = sda3 Active drives: Drive = sda3 File system id = 19 Descriptors: read = -1, write = -1, master = -1 Current File: byt ...

  • Cisco Systems OL-15491-01 - page 248

    A-248 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference snmp-server enable tra ps csg snmp-server enable traps csg T o enable Sim ple Network Management Protocol (S NMP) notif ication types that are a vailable on t he CSG2, use the snmp-server enable trap ...

  • Cisco Systems OL-15491-01 - page 249

    A-249 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference snmp-server enable traps csg Examples The following e xample enables CSG2 traps: snmp-server enable traps csg Related Commands Com ma nd D esc ri pti on ip csg snmp timer Defines Simple Netwo rk Manage ...

  • Cisco Systems OL-15491-01 - page 250

    A-250 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference subscriber-ip http- header forwarded- for subscriber-ip http-header forwarded-for T o specify that the C SG2 is to obt ain the subscr iber's IP address from the HTTP X-Forwarded-F or header , us ...

  • Cisco Systems OL-15491-01 - page 251

    A-251 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference subscriber-ip http-header forwarded-for T o pre vent exposure of pot entially sensiti ve IP addresses, the CSG2 can obscure the contents of X-Forw arded-For head ers, ov erwrit ing the contents with bl ...

  • Cisco Systems OL-15491-01 - page 252

    A-252 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference verify confirm verify confirm T o conf igure a token for use in CSG2 service v erif ication URL-re writing, use the verify conf irm command in CSG2 service conf iguration mode. T o remov e the tok en ...

  • Cisco Systems OL-15491-01 - page 253

    A-253 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference verify confirm Examples The followi ng exampl e specif ies a token for service v erif ication URL-re writing: ip csg service MOVIES aoc enable verify confirm ?CSG_VERIFY_OK Related Commands Com ma nd D ...

  • Cisco Systems OL-15491-01 - page 254

    A-254 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference verify enable verify enable T o enable CSG2 service verif ication, use the veri fy e na ble command in CSG2 service configuration mode. T o disable this feature, use the no form of this command. veri ...

  • Cisco Systems OL-15491-01 - page 255

    A-255 Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference vlan (CSG2 content) vlan (CSG2 content) To restrict the CSG2 billing content to a single source VLAN, u se the vla n command in CSG2 content confi guration mode . T o remove the restrict ion, use the n ...

  • Cisco Systems OL-15491-01 - page 256

    A-256 Cisco Content Services Gateway - 2nd G eneration Re lease 2.0 Installation and Configuration Guide OL-15491-01 Appendix A CSG2 Command Reference vrf vrf To restrict the CSG2 content to packets within a single Virt ual Routing and Forwardi ng (VRF) table, use the vrf command in CSG2 content co nfigu ration mode . T o remove the restriction, us ...

メーカー Cisco Systems カテゴリー Network Hardware

Cisco Systems OL-15491-01のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- OL-15491-01の取扱説明書
- Cisco Systemsの製品カード
- パンフレット
- またはCisco Systems OL-15491-01の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Cisco Systems OL-15491-01の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Cisco Systems OL-15491-01の取り付け説明書、サービスマニュアル、簡易説明書、またはCisco Systems OL-15491-01のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Cisco Systems OL-15491-01の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Cisco Systems OL-15491-01デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCisco Systems OL-15491-01を使用するのを助ける技術的文書のことです。説明書は通常、全てのCisco Systems OL-15491-01ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Cisco Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Cisco Systems OL-15491-01の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCisco Systems OL-15491-01の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Cisco Systems OL-15491-01に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Cisco Systems OL-15491-01デバイスの基本機能を使うにあたってのヒント。 Cisco Systems OL-15491-01のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Cisco Systems OL-15491-01に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCisco Systems OL-15491-01のメーカー/サービスへの連絡先に関する情報。

Cisco Systems OL-15491-01についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCisco Systems OL-15491-01の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCisco Systems OL-15491-01で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)