日本語 dropdown-ico

Kenwood DPF-1010の取扱説明書

24ページ 0.64 mb
ダウンロード

ページに移動 of 24

Summary
  • Kenwood DPF-1010 - page 1

    CD PLA YER DIGITAL AUDIO COMPACT B60-3730-08 00 KO ( T, M, X ) OC 99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 3 DPF-3010 INSTRUCTION MANUAL KENWOOD CORPORA TION DPF-1010 DPF-2010 ...

  • Kenwood DPF-1010 - page 2

    2 DPF-3010/2010/1010 (En) Before applying power Caution : Read this section carefully to ensure safe operation. Units are designed for operation as follows. Australia .................................................................................. A C 240 V only Europe and U.K. ..................................................................... ...

  • Kenwood DPF-1010 - page 3

    3 DPF-3010/2010/1010 (En) Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without d ...

  • Kenwood DPF-1010 - page 4

    4 DPF-3010/2010/1010 (En) Caution : Read this page carefully to ensure safe operation. IMPORT ANT SAFEGUARDS 6. Temperature – The appliance may not function properly if used at extremely low, or freezing temperatures. The ideal ambient temperature is above +5°C (41°F). 7. Heat – The appliance should be situated away from heat sources such as ...

  • Kenwood DPF-1010 - page 5

    5 DPF-3010/2010/1010 (En) Caution : Read this page carefully to ensure safe operation. 1 3 . Lightning – For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the app ...

  • Kenwood DPF-1010 - page 6

    6 DPF-3010/2010/1010 (En) System connections Caution: Do not plug in the power lead until all connections are com- pleted. Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections hav e been made proper ly , r eset the microcomputer referring to “In case of difficulty”. ™ Mak e connect ...

  • Kenwood DPF-1010 - page 7

    7 DPF-3010/2010/1010 (En) Adjusting the output levels of the output jacks and headphone output (only for DPF-3010/2010) The OUTPUT level (UP/DOWN) keys of the remote control unit can adjust the output levels from the LINE/OUT jacks and PHONES jack (DPF-3010 only) of the unit. T o use the headphone (only for DPF-3010) Connect a stereo headphone to t ...

  • Kenwood DPF-1010 - page 8

    8 DPF-3010/2010/1010 (En) SYSTEM CONTROL OPERA TIONS Remote Control Lets y ou operate this unit with the system remote control unit supplied with the amplifier or receiver . Automatic Operation (Except [XR] equipment) Automatically switches the input selector on the amplifier or receiver when you start playback from this unit. Synchronized Recordin ...

  • Kenwood DPF-1010 - page 9

    9 DPF-3010/2010/1010 (En) Caution on disc used Cleaning If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards, in a radial manner . Storage When a disc is not to be played for a long period of time, remove it from the CD player and store it in ...

  • Kenwood DPF-1010 - page 10

    10 DPF-3010/2010/1010 (En) Controls and indicators CCRS indicator Pause indicator Play indicator Play track No. indicator SINGLE TIME indicator TOTAL TIME indicator TRACK mode indicator Program mode indicator REPEAT indicator DISPLA Y Program check indicator EDIT indicator Music calender TIME indicator, program No. Output level indicator 1 ON/ST AN ...

  • Kenwood DPF-1010 - page 11

    11 DPF-3010/2010/1010 (En) Operation of remote control unit (DPF-3010/DPF-2010 only) 1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries. 2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones. 3. Malfunction may occur if d ...

  • Kenwood DPF-1010 - page 12

    12 DPF-3010/2010/1010 (En) Normal play (TRACK mode) 2 Load a disc. 3 Start playback. 1 Open the tray. Use the following procedure to play a CD in the original order of tracks from track No. 1. : Keys and control used in the operations described on this page. 3 Close the tray. Playing tracks in order from track No. 1 ÷ Playback starts when a disc h ...

  • Kenwood DPF-1010 - page 13

    13 DPF-3010/2010/1010 (En) Playback from desired track Press the numeric keys as shown below.... To enter track No. 23 : 003 To enter track No. 40 : 0000) ÷ Playback starts from the selected track and continues on the subse- quent tracks. Skipping tracks ÷ The track in the direction of the pressed key is skipped, and the selected track will be pl ...

  • Kenwood DPF-1010 - page 14

    14 DPF-3010/2010/1010 (En) Programmed play (PGM mode) Use the following procedure to program desired tracks in a desired order. (up to 20 tracks) ÷ Load a disc in the CD player. @ Press so that the “PGM” indicator lights. Program desired tracks. 1 2 Preparation : Keys and control used in the operations described on this page. ÷ The programmed ...

  • Kenwood DPF-1010 - page 15

    15 DPF-3010/2010/1010 (En) ÷ When a track No. is selected, the track will be added to the end of the existing program. Press to clear tracks from the end. T o check or change the programmed tracks T o clear tracks from the program 1 Press the CHECK k ey . Press until the track No. to be changed is displayed. 2 Select the new track No. Auto space f ...

  • Kenwood DPF-1010 - page 16

    16 DPF-3010/2010/1010 (En) Repeated playback T o repeat only the programmed tracks : Keys and control used in the operations described on this page. ™ Preparation T o cancel repeated playback Pr ess the REPEA T key ag ain. Lights up. 1 Press so that the "PGM" indicator lights. 2 Select the desired track No. Press the numeric keys as sho ...

  • Kenwood DPF-1010 - page 17

    17 DPF-3010/2010/1010 (En) T o repeat the entire disc 1 Press so that the “TRACK” indicator lights. 2 Switch REPEAT ON. 3 Start playback. T o cancel repeated playback Press the REPEA T ke y again. : Keys and control used in the operations described on this page. Goes off. Lights up. Lights up. 1¡  4 76 ¢ REPEAT 6 PLAY/PAUSE REPEAT P.MOD ...

  • Kenwood DPF-1010 - page 18

    18 DPF-3010/2010/1010 (En) The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle at the ends of sides A and B. Editing Preparation : Keys and control used in the operations described on this page. Press the numeric keys as shown below. 30-minute tape : 000) 46-minute tape : 0000 ...

  • Kenwood DPF-1010 - page 19

    19 DPF-3010/2010/1010 (En) : Keys and control used in the operations described on this page. Press any one of these keys. ÷ The edited data is cleared entirely. T o clear the edited contents ÷ When the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B. ÷ The "P.C." indica ...

  • Kenwood DPF-1010 - page 20

    20 DPF-3010/2010/1010 (En) Playback in a random order (Random playback) ÷ Pressing the 4 key once returns to the beginning of the track being played. ÷ Press the RANDOM key to start normal playback. ™ As tracks are selected at random, you can enjoy listening to for a long time. ÷ Load a disc in the CD player. @ Preparation T o select another t ...

  • Kenwood DPF-1010 - page 21

    21 DPF-3010/2010/1010 (En) T imer operations Timer pla yback of CD can be star ted at an y time using an audio timer which is available in audio stores. Preparation ÷ Connect the power cords of the associated components so that their power can be turned ON through the audio timer. (Also, be sure to read carefully the instruction manual of the time ...

  • Kenwood DPF-1010 - page 22

    22 DPF-3010/2010/1010 (En) ÷ Insert the power plug firmly to the AC outlet. ÷ Turn the amplifier’s power ON. ÷ Load the disc again with its label side up. ÷ Insert the disc properly . ÷ Wipe off the dust on the surface of the disc referring to “Disc handling precautions”. 9 ÷ Replace the disc with a new one. ÷ Leave the player for abou ...

  • Kenwood DPF-1010 - page 23

    23 DPF-3010/2010/1010 (En) Specifications [ Format ] System ..................................................................................... Compact disc digital audio system Laser ................................................................................................................ Semiconduc tor laser [ D/A Con ver tors ] D/A Conve ...

  • Kenwood DPF-1010 - page 24

    For your records Record the serial number , found on the bac k of the unit, in the spaces designated on the war ranty card, and in the space provided below . Ref er to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model Serial Number ...

メーカー Kenwood カテゴリー CD Player

Kenwood DPF-1010のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- DPF-1010の取扱説明書
- Kenwoodの製品カード
- パンフレット
- またはKenwood DPF-1010の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Kenwood DPF-1010の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Kenwood DPF-1010の取り付け説明書、サービスマニュアル、簡易説明書、またはKenwood DPF-1010のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Kenwood DPF-1010の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Kenwood DPF-1010デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがKenwood DPF-1010を使用するのを助ける技術的文書のことです。説明書は通常、全てのKenwood DPF-1010ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Kenwoodの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Kenwood DPF-1010の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははKenwood DPF-1010の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Kenwood DPF-1010に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Kenwood DPF-1010デバイスの基本機能を使うにあたってのヒント。 Kenwood DPF-1010のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Kenwood DPF-1010に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるKenwood DPF-1010のメーカー/サービスへの連絡先に関する情報。

Kenwood DPF-1010についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもKenwood DPF-1010の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがKenwood DPF-1010で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)