日本語 dropdown-ico

Porter-Cable 36-225の取扱説明書

21ページ 1.05 mb
ダウンロード

ページに移動 of 21

Summary
  • Porter-Cable 36-225 - page 1

    INSTRUCTION MANUAL 10" Compound Miter Saw (Model 36-225) P ART NO. 899935 - 03-14-02 Copyright © 2002 Delta Machinery ESP AÑOL: PÁGINA 21 T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582). ...

  • Porter-Cable 36-225 - page 2

    2 GENERAL SAFETY RULES W oodworking can be dangerous if safe and pr oper operating procedur es ar e not followed. As with all machinery , ther e are certain hazar ds involved with the operation of the pr oduct. Using the machine with respect and caution will con- siderably lessen the possibility of personal injury . However , if normal safety preca ...

  • Porter-Cable 36-225 - page 3

    3 3 ADDITIONAL SAFETY RULES FOR MITER SA WS 1. USE ONL Y CROSS-CUTTING SAW BLADES. WHEN USING CARBIDE TIPPED BLADES, MAKE SURE THEY HA VE A NEGA TIVE HOOK ANGLE. 2. DO NOT OPERA TE the miter saw until it is com- pletely assembled and installed according to the instruc- tions. 3. IF YOU ARE NOT thoroughly familiar with the oper- ation of compound mi ...

  • Porter-Cable 36-225 - page 4

    4 Fig. A Fig. B GROUNDED OUTLET BOX CURRENT CARR YING PRONGS GROUNDING BLADE IS LONGEST OF THE 3 BLADES GROUNDED OUTLET BOX GROUNDING MEANS ADAPTER POWER CONNECTIONS A separate electrical circuit should be used for your machines. This cir cuit should not be less than #12 wir e and should be protected with a time lag fuse. If an extension cor d is u ...

  • Porter-Cable 36-225 - page 5

    5 Use proper extension cor ds. Make sur e your extension cord is in good condition and is a 3-wir e extension cor d which has a 3-prong gr ounding type plug and matching r eceptacle which will accept the machine’ s plug. When using an extension cord, be sur e to use one heavy enough to carry the curr ent of the machine. An undersized cord will ca ...

  • Porter-Cable 36-225 - page 6

    6 UNP ACKING 1. Remove the miter saw and all loose items from the carton. IMPORT ANT : DO NOT LIFT THE MITER SAW BY THE SWITCH HANDLE AS THIS MA Y CAUSE MISALIGNMENT . AL WA YS LIFT THE MACHINE BY THE BASE OR CARRYING HANDLE (see (D) Fig. 4A . Fig. 2 illustrates the machine and all loose items after they have been removed fr om the carton. 1 - Mite ...

  • Porter-Cable 36-225 - page 7

    7 Fig. 5 Fig. 7 Fig. 8 C A C B D Fig. 6 ROT A TING T ABLE TO THE 90° POSITION Loosen table locking handle (A) Fig. 5, one turn and squeeze locking trigger (B). Rotate table until plunger (C) is engaged into the 90 ° stop (0 ° on scale) . Then tighten handle (A) by turning clockwise. ASSEMBLING DUST BAG Assemble dust bag (A) Fig. 6, to free end o ...

  • Porter-Cable 36-225 - page 8

    8 F ASTENING MACHINE TO SUPPORTING SURF ACE Fig. 9 Before operating your compound miter saw , make sure it is firmly mounted to a stur dy workbench or other supporting surface. Four holes are pr ovided, two of which are shown at (A) Fig. 9, for fastening the saw to a supporting surface . When frequently moving the saw fr om place to place, we sugge ...

  • Porter-Cable 36-225 - page 9

    9 9 ST AR TING AND STOPPING MACHINE T o start the machine, depress switch trigger (A) Fig. 13. T o stop the machine, release the switch trigger . Y our miter saw is equipped with an automatic electric blade brake. As soon as the switch trigger (A) Fig. 13, is released, the electric brake is activated and stops the blade in seconds. WARNING: A TURNI ...

  • Porter-Cable 36-225 - page 10

    10 Fig. 17 Fig. 16 Fig. 18 POINTER AND SCALE A pointer (A) Fig. 16, is supplied which indicates the actual angle of cut. Each line on the scale (B) repr esents 1°. In effect, when the pointer is moved fr om one line to the next on the scale, the angle of cut is changed by 1°. TIL TING CUTTINGHEAD FOR BEVEL CUTTING The cuttinghead of your compound ...

  • Porter-Cable 36-225 - page 11

    11 11 11 11 11 Fig. 20 Fig. 21 Fig. 19 A A A REAR SUPPORT/ CARR YING HANDLE A rear support bar (A) Fig. 19, is pr ovided to pr event the miter saw from tipping to the r ear when the cuttinghead is returned to the raised position after a cut has been made. For maximum support, support bar (A) should be pulled out as far as possible before attempting ...

  • Porter-Cable 36-225 - page 12

    12 Fig. 24 Fig. 25 Fig. 27 Fig. 23 H G Fig. 26 ADJUSTMENTS ADJUSTING T ABLE POSITIVE STOPS DISCONNECT SAW FROM POWER SOURCE BEFORE PERFORMING ANY ADJUSTMENTS. 1. Using a straight edge (G) Fig. 23, determine if the two fence halves are parallel to each other by placing the straight edge against the front surfaces of the fence as shown. If an adjustm ...

  • Porter-Cable 36-225 - page 13

    13 13 13 13 13 Fig. 28 Fig. 29 Fig. 30 Fig. 31 A C B D A E F G B A Fig. 32 ADJUSTING DOWNWARD TRA VEL OF SAW BLADE 1. DISCONNECT THE SAW FROM THE POWER SOURCE. 2. The downward travel of the saw blade can be limit- ed to prevent the saw blade fr om contacting any metal surfaces of the machine. This adjustment is made by loosening locknut (A) Fig. 32 ...

  • Porter-Cable 36-225 - page 14

    14 Fig. 33 TYPICAL OPERA TIONS AND HELPFUL HINTS Fig. 35 A A B Fig. 34 1. Before cutting, make certain the cutting arm and table are at their corr ect settings and firmly locked in place. 2. Before cutting, determine that the saw is the right size for the workpiece. 3. Place the workpiece on the table and clamp it firm- ly against the fence. Fig. 3 ...

  • Porter-Cable 36-225 - page 15

    15 15 15 15 15 Fig. 37 Fig. 36 Fig. 38 Fig. 39 AUXILIAR Y WOOD FENCE When performing multiple or repetitive cut-of f operations that r esult in small cut-off pieces, one inch or less, it is pos- sible for the saw blade to catch the cut-off pieces and pr oject them out of the machine or into the blade guar d and housing, possibly causing damage or i ...

  • Porter-Cable 36-225 - page 16

    16 Fig. 40 Fig. 41 CUTTING ALUMINUM Aluminum extrusions such as used for making aluminum screens and storm windows can easily be cut with your compound miter saw . When cutting aluminum extrusions, or other sections that can be cut with a saw blade and are within the capacity of the machine, position the material so the blade is cutting through the ...

  • Porter-Cable 36-225 - page 17

    17 17 17 17 17 Fig. 44 Fig. 45 Fig. 46 Fig. 47 C D C A D B CUTTING CROWN MOULDING One of the many features of your saw is the ease of cut- ting crown moulding. The following is an example of cut- ting both inside and outside corners on 52/38° wall angle crown moulding. NOTE: When cutting 45° wall angle crown moulding the following pr ocedur e for ...

  • Porter-Cable 36-225 - page 18

    18 CHANGING THE BLADE WARNING: USE ONL Y CROSS-CUTTING SAW BLADES. USE ONL Y 10" DIAMETER SAW BLADES RA TED FOR 6000 RPM OR HIGHER WITH 5/8" ARBOR HOLES. 1. DISCONNECT THE MACHINE FROM THE POWER SOURCE. 2. Remove screw (A) Fig. 49. Fig. 48 CONSTRUCTING WORK SUPPORT EXTENSIONS One of the unique features of your miter saw is the ease with w ...

  • Porter-Cable 36-225 - page 19

    19 19 19 19 19 Fig. 50 Fig. 51 Fig. 52 D C E F Fig. 53 3. Rotate arbor cover (B) Fig. 50, and lower guard (G) to the rear , exposing arbor screw (C), as shown. 4. Remove arbor screw (C) Fig. 50, by turning screw clockwise with wrench supplied while at the same time pressing in on arbor lock (D) Fig. 51, to keep the arbor from turning. Remove outsid ...

  • Porter-Cable 36-225 - page 20

    20 T wo Y ear Limited W arranty Delta will repair or r eplace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, pr ovided that the customer returns the product pr e- paid to a Delta factory service center or authorized service station w ...

  • Porter-Cable 36-225 - page 21

    The following are trademarks of POR TER-CABLE · DEL T A (Las siguientes son marcas r egistradas de PORTER-CABLE S.A.): BAMMER ® , INNOV A TION THA T WORKS ® , JETSTREAM ® , LASERLOC ® , OMNIJIG ® , POCKET CUTTER ® , POR T A-BAND ® , PORT A-PLANE ® , PORTER- CABLE ® , QUICKSAND ® , SANDTRAP ® , SA W BOSS ® , SPEED-BLOC ® , SPEEDMA TIC ...

メーカー Porter-Cable カテゴリー Saw

Porter-Cable 36-225のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 36-225の取扱説明書
- Porter-Cableの製品カード
- パンフレット
- またはPorter-Cable 36-225の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Porter-Cable 36-225の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Porter-Cable 36-225の取り付け説明書、サービスマニュアル、簡易説明書、またはPorter-Cable 36-225のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Porter-Cable 36-225の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Porter-Cable 36-225デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPorter-Cable 36-225を使用するのを助ける技術的文書のことです。説明書は通常、全てのPorter-Cable 36-225ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Porter-Cableの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Porter-Cable 36-225の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPorter-Cable 36-225の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Porter-Cable 36-225に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Porter-Cable 36-225デバイスの基本機能を使うにあたってのヒント。 Porter-Cable 36-225のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Porter-Cable 36-225に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPorter-Cable 36-225のメーカー/サービスへの連絡先に関する情報。

Porter-Cable 36-225についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもPorter-Cable 36-225の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPorter-Cable 36-225で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)