ページに移動 of 91
User’s manual S ynJ SB67148 DECT 6.0 4-line e xpansion deskset for use with A T&T model S ynJ SB67118/SB67138 ...
Congr atulations on your purchase of this A T&T product. Befor e using this AT&T pr oduct, please read the Important saf ety information on pages 76-77 of this manual. Please thoroughl y read this user’s manual for all the f eature oper ations and troubleshooting inf ormation necessary to inst all and operate y our new A T&T product. ...
P arts checklist Check to make sure the telephone package includes the following items: Deskset Deskset power adapter Backup battery Handset with coiled cord installed User's manual User’s manual SynJ SB67148 DECT 6.0 4-line expansion deskset for use with AT&T model SynJ SB67118/SB67138 Quick start guide Quick start guide SynJ SB67148 DE ...
T abl e of cont ents User’s manual S ynJ SB67148 DECT 6.0 4-line e xpansion deskset for use with A T&T model S ynJ SB67118/SB67138 Getting s tarted Quick ref erence guide .............................. 1 Installation ...................................................... 4 Deskset installation .................................... 5 Backup bat ...
PTT to all devices ..................................36 Answer a PTT call ..................................37 Convert a PTT call to an interc om call ............................................37 End a PTT call ........................................37 Dir ectory About the directory ..................................38 Capacity ................. ...
1 Quick r ef er ence guide NEW CALL indicator On when there are new or missed calls (page 46). Navigation k eys While in men us, pr ess DIR or CID t o scr oll th rou gh the menus, highlig ht it ems or to c hange setti ngs. While ente ring na mes or number s, pr ess or to m ove the cur sor t o the le ft or right. While playi ng bac k messa ges, pr e ...
2 Getting started MUTE During a call, press to mute the microphone (page 24). During an incoming call, press to mut e the ringer (page 22). VOL+/V OL- During a call, press to adjust the list ening volume (page 24). During message playback, press t o adjust the playback volume (page 58). Press to adjust the ringer volume (page 13). SPEAKER Press to ...
3 Getting started Main menu The > symbol highlights a menu item. Main menu Direct ory (pages 38-43) Call log (pages 44-48) Ringer setting (pages 13-14) Mailbox setup (pages 52-56) Deskset setup (pages 15-17) COVM (page 30) Speed dial setup (page 18) Customer support (page 18) • • • • • • • • Quick r ef er ence guide >Directory ...
4 Getting started Install the deskset close to a power outlet not controlled by a wall switch. The deskset should be placed on a flat surface. For optimum range and better reception, place the deskset near the main telephone base. Y our product may be shipped with a protective sticker covering the deskset display - remove it before use. For custome ...
5 Getting started Deskset install ation IMPORT ANT INF ORMA TION: Use only the power adapter supplied with this pr oduct. T o order a r eplacement power adapter , visit our website at www .tel ephones.att.c om , or call 1 (888) 915-2007 . In Canada, dial 1 (866) 288-4268 . The power adapter is intended to be c orrectly orient ed in a vertical or fl ...
6 Getting started IMPORT ANT INF ORMA TION: Use only the supplied rechar geable battery or r eplacement battery (model 27910). T o order , visit our website at www .tel ephones.att.c om , or call 1 (888) 915-2007 . In Canada, dial 1 (866) 288-4268 . Press down the tab to open the battery compartment cover . 1. Place the battery in the compartment. ...
7 Getting started Backup bat t ery char ging When the deskset loses power with the backup batt ery installed, the screen indicates the batt ery status (see tabl e below) and displays Check A C power . When the backup batt ery is in low batt ery mode, the screen displays L ow battery . The back up battery is full y charged aft er 16 hours of continu ...
8 Getting started Add and r egist er a deskset The handset provided with the S ynJ SB67118/SB67138 is already r egistered as Handset 1 . Additional desksets are assigned number s in the order they are r egister ed ( Deskset 2 to Deskset 10 ). Y ou can register a ma ximum of 10 desksets/handsets, or 9 desksets/handsets and one c ordless headset. Y o ...
9 Getting started Add and r egist er a deskset R egister the deskset t o your SynJ SB67138 t elephone base On the SynJ SB67138 telephone base, pr ess MENU/ ENTER . Scroll down to R egistra tion and press MENU /ENTER . Press MENU /ENTER again to sel ect R egister HS. The main telephone base scr een shows Regis tering new device... Press the St art s ...
10 Getting started Der egist er a deskset Y ou may need to deregist er the deskset from the main telephone base if you already have ten regist ered devices and need to replace a deskset, or if you wish to change the assigned number of your registered devices. Y ou must first deregister ALL the registered devices, and then register each device that ...
11 Getting started Der egist er the deskset fr om your S ynJ SB67138 telephone base On the SynJ SB67138 telephone base, pr ess SynJ SB67138 telephone base, pr ess telephone base, pr ess MENU /ENTER . Scroll down to R egistra tion and press MENU/ ENTER . Scroll down to Der egistr ation and press MENU/ ENTER . The main telephone base shows Der egist ...
12 Getting started Y ou can use this deskset handsfree when you install any industry-standard 2.5mm corded telephone headset (purchased separately). For best results, use a 2.5mm corded headset. T o purchase a headset, visit our website at www .tel ephones.at t.com , or call 1 (888) 915-2007 . In Canada, dial 1 (866) 288-4268 . See pages 19-22 for ...
13 Menu settings Use the menus to change the deskset settings. Press the Menu softk ey to enter the main menu when the deskset is not in use. Press DIR or CID to scroll t o the feature to be to scroll t o the feature to be changed. The > symbol indicates the select ed menu item. Press the Sel ect softkey t o select the menu item. Press the Back ...
14 Deskset settings Ringer tone Use this featur e to turn the key tone on and off. The telephone base is factory set to beep with each key press. Y ou can turn off this beep sound by turning the key tone off. When the deskset is not in use, press the Menu softkey . Press DIR or CID to scroll to Ringer setting . Press the Select softkey . Press DIR ...
15 Deskset settings L CD contr ast Use this featur e to adjust the screen contrast to one of five levels to optimize readability in different lighting conditions. When the deskset is not in use, press the Menu softkey . Press DIR or CID to scroll to Deskset setup . Press the Select softkey . Press the Select softkey to select L CD contr ast . Press ...
16 Deskset settings Language Use this featur e to change the display language that is used in all menus and screen displays. This telephone comes fact ory set for English displays. When the deskset is not in use, press the Menu softkey . Press DIR or CID to scroll to Deskset setup . Press the Select softkey . Press DIR or CID to scroll to Language ...
17 Deskset settings Deskset name Use this featur e to change the deskset name. When the deskset is not in use, press the Menu softkey . Press DIR or CID to scroll to Deskset setup . Press the Select softk ey. Press DIR or CID to scroll to Deskset name . Press the Select softk ey. Use the dialing keys (page 40) to enter a name. Press move the cursor ...
18 Deskset settings Speed dial setup The deskset has 10 speed dial locations where you can st ore the telephone numbers you wish to dial using f ewer keys than usual. Y ou can store up to 32 digits in each location. The first five l ocations can be accessed buy using only the speed dial keys. T o access the remaining five locations, pr ess L OWER a ...
19 The telephone comes programmed to use line 1 (default primary line) for outgoing calls when you do not press a line key . (T o change the primary line, see Line selection on page 16.) When you answer a call, the telephone automatically selects the ringing line. Line indicators Each of the four indicators on LINE 1 - LINE 4 indicates the status o ...
20 Deskset operation On hook dialing (pr edialing) T o pr edial using the cor ded handset: Enter the telephone number . Press X/DELETE to make corrections when entering the telephone number . Lift the corded handset to dial. -OR- T o override automatic line selection, press LINE 1 - LINE 4 for the desired line, then lift the c orded handset. T o pr ...
21 Deskset operation Dial a speed dial number Press the desired speed dial key . -OR- Press L OWER and then the desired speed dial k ey. Lift the corded handset, or press the Call softkey , SPEAKER or HEADSET . -OR- T o override automatic line selection, press LINE 1 - LINE 4 for the desired line and use the speakerphone. If you want to use the cor ...
22 Deskset operation Sw itch amon g t he cor ded hands et, th e spe ak erpho ne and the co rde d hea dse t T o switch from the cor ded handset to the speak erphone/corded headset: While you are using the corded handset on a call, press SPEAKER or HEADSET . Put the cor ded handset back to the deskset. T o switch from the speakerphone/c orded headset ...
23 Deskset operation T o save a redial ed number in the direct ory: When the desired number displays, press the Save softkey . The deskset displays Enter phone # . Use the dialing keys (page 40) t o edit the number, if necessary . Press or to move the cursor t o the left or right. Press X/DELETE to backspac e and delete a digit. Press and hold X/DE ...
24 Deskset operation V olume contr ol While on a call, press VOL+ or VOL- to adjust the listening volume. NO TES : The cord ed h eadset and co rd ed hand set vo lum e se ttings are the same , but t he spea kerph one vo lum e se tting is inde pendent . Y ou hear a triple beep when you have reached the minimum or maximum volume level. Call waiting If ...
25 Deskset operation Call privacy For call privacy, you can also block all other system handsets and the main telephone base from joining a phone conversation (see page 27 for instructions for joining a call). T o enable call privacy: During a call, press the Option softk ey and then press the Select softk ey to choose Privacy ON. The screen displa ...
26 Deskset operation Rec ord a call Use this featur e to record a two-way phone conversation during a call. The recor ding is treated the same as memos and is always marked as a new message in the mailbox. However, the message indicator does not flash for new or missed rec orded calls. Y ou cannot recor d a conference call or an interc om call. You ...
27 Deskset operation Hold Use this featur e to hold one line while accessing another , or as part of the conference and call transfer features. While on a call, press HOLD . The LINE 1 - LINE 4 indicator for the line on hold flashes slowly in red. After the call has been on hold for more than three minutes, a beep sounds every 30 seconds. (See Hold ...
28 Deskset operation Chain dialing While you are on a call, you can initiate a dialing sequence from the numbers in the directory . Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes) from the directory . T o acc ess the direct ory while on a call: During the call, press DIR , then press DI ...
29 Deskset operation T o talk privatel y on the inter com call: Press HOLD to talk privately with the person on that intercom call. The external line is automatically placed on hold. Press the Conf softkey to resume the confer ence call. T o dr op one line: Press LINE 1 - LINE 4 to activate the line you want to drop. Place the corded handset on the ...
30 Deskset operation CO VM (central offic e voicemail) If you subscribe to voicemail service with your telephone service provider , and you want the deskset to indicate when you have new voicemail, turn the CO VM indicator on. When a phone line receiv es any new voicemail messages, CO VM LX ( X is the telephone line number) displays on the screen. ...
31 Deskset operation Y ou can use the intercom feat ure for c onversations with a cor dless handset, a cordl ess headset or the SB67118/SB67138 main telephone base. When the system is making one or mor e external calls, the deskset can make int ercom calls with a cordl ess handset, a cordl ess headset or the main telephone base. Mak e an interc om ...
32 Deskset operation Answer an incoming call during an int ercom call If you rec eive an incoming outside call during an intercom call, there is an alert tone. T o ans wer the call , pre ss LIN E 1 - L INE 4 . The int er com cal l ends aut omati call y . Answer an inter com call When you rec eive an inter com call, you hear a ringing tone and your ...
33 Deskset operation Y ou can transfer a call to the main t elephone base or any other system devic e. During a call, press INT . Press DIR or CID to scroll to the desired device. Press the Select softkey . -OR- Press 1 - 0 for the desir ed extension number , (star ke y) for the main telephone base, or # (pound key) f or all. The outside call is pu ...
34 Deskset operation Call tr ansfer using int er com Y ou can also transfer a call to the gener al mailbox. During a call, press INT . Press DIR or CID to scroll to Mailbo x . Press the Select softkey . The caller is prompt ed to leave a message in the general mailbox. NOTE: For details on how to operate the mailbox, see the SynJ SB67118/SB67138 us ...
35 Deskset operation Y ou can directly broadcast y our voice to the speak erphone of any extension. The extension y ou called can respond b y pressing the PTT k ey to begin a two-way communication. Up t o five pairs of PTT calls can e xist at a time. PTT to the main t elephone base or a syst em device When the deskset is not in use, press the PTT k ...
36 Deskset operation PTT to all devic es When the deskset is not in use, press the PTT key . Press DIR or CID to choose # : All . Then pr ess and hol d PTT unti l the desk set displ ays PT T to : All R elea se PTT k ey to st op . -OR- When the deskset is not in use, press and hold the P TT key until the deskset displays P TT t o: All R el eas e PTT ...
37 Deskset operation Push t o talk (P TT) int er com Answer a PTT call When you hear two beeps, the screen displays PTT fr om: X:Handset X ( X repr esents the extension number [ 1 - 0 ], Handset X repr esents the handset name) or PTT from: * :Base . T o respond to a new PTT call, press INT on the deskset to convert the call to a two-way intercom ca ...
38 Use the directory t o store names and phone numbers. The direct ory in the deskset is independent from the main t elephone base and all other regist ered devices. Changes made to the dir ectory on the main telephone base and other register ed handsets apply only to that particular device. Capacity The directory of the deskset can store up to 100 ...
Directory 39 Cr eate a new dir ectory entry Use the following steps to store a name and number in the directory . When the deskset is not in use, press the Menu softk ey and then press the Select softk ey to choose Direct ory . -OR- Press DIR on the deskset. When the deskset displays Dir ectory empty or Dir ectory XX entries , press the Add softk e ...
Directory 40 Cr eat e dir ectory entries Stor e a pause in a direct ory entry Y ou may need to include a pause in a direct ory number to enable access to automated telephone systems. When you wish to enter a pause in the dialing sequenc e, press the Pause softkey t o stor e a pause (a P appears). Each pause counts as one digit. If you want to sav e ...
Directory 41 Review dir ectory entries When the deskset is not in use, press the Menu softk ey and then press the Sel ect softkey t o choose Dir ectory . -OR- Press DIR on the deskset. When the deskset displays Dir ectory empty or Dir ectory XX entries , press DIR or CID to br owse through the direct ory . Entries appear alphabetically by the first ...
Directory 42 Sear ch by name Follow the steps below to search for direct ory entries on the deskset. When the deskset is not in use, press the Menu softk ey and then press the Select softk ey to choose Direct ory . -OR- Press DIR on the deskset. When the deskset displays Dir ectory empty or Dir ectory XX entries , press DIR or CID to browse thr oug ...
Directory 43 Y ou can dial, delete or edit a direct ory entry (name and number) when it is shown on the deskset screen. Y ou can use the directory r eview or name search (pages 41-42) to show an entry . Display dial When a number is displayed on the screen, you can dial the number by lifting the corded handset, pressing SPEAKER , HEADSET or LINE 1 ...
44 This deskset supports caller ID services that most t elephone service pr oviders offer . Caller ID allows you to see the name, number , date and time of calls. Depending on your service subscription, you might see the caller’s number , or the caller’s name and number from the t elephone service provider after the first or second ring. Caller ...
Caller ID 45 How the caller ID inf ormation (call log) works The deskset stores caller ID information for the last 50 incoming calls. Entries are stored in reverse chronological order . The telephone deletes the oldest entry when the log is full to make room for a new call. Each extension has an independent call log. Deleting the caller ID informat ...
Caller ID 46 Memory match If the incoming telephone number is an exact match with a telephone number in your direct ory , the name that appears on the screen matches the corresponding name in your directory . For example, if Christine Smith calls, her name appears as Chris if this is how you enter ed it into your directory . NOTE: The number shown ...
Caller ID 47 View dialing options Although the incoming call log entries have 10 digits (the area code plus the seven-digit number), in some areas, you may need to dial only the seven digits, 1 plus the seven digits, or 1 plus the area code plus the seven digits. Y ou can change and store the number of digits that you dial in the call log. While re ...
Caller ID 48 Caller ID oper ation Save a call l og entry to the dir ectory When in the call log, press DIR or CID to browse . When the desired entry displays, press the Edit softke y . When the telephone number appears: telephone number appears: number appears: Press the dialing k eys to add digits (page 40). Press X/DELETE to er ase a digit. Press ...
Caller ID 49 R easons for missing caller ID inf ormation R easons for missing call er ID informa tion There are also occasions when other information or no information shows for various reasons: Scr een message Reason Private caller Th e ca lle r p r ef er s no t t o s ho w t he t ele pho ne n umb er a nd name . Unknown caller Y ou r tel eph on e s ...
50 Deskset voicemail bo x (answering syst em) The deskset has a private voicemail box that is different from the general mailbox on the main telephone base or handset. The voicemail messages for the deskset can also be accessed from the main telephone base. The deskset has separate indicators for two different types of voice messages: those left on ...
Answering system 51 Set the answering syst em to answer aut omatically Y ou can set each of the four lines to automatically answer inc oming calls on the main telephone base in two differ ent ways. See the SynJ SB67118/ SB67138 user’s manual for more inf ormation. General mailbo x: The ca lled line rin gs on ev ery e xten sion fo r e ach i nc omi ...
Answering system 52 Deskset mailbo x overview Y our deskset has its own mailbox which is differ ent from the general mailbox on the main telephone base. If you turn on the auto attendant on the main telephone base and fast answer mode on the deskset, the caller is able to leave a message on the deskset mailbox after two rings. If you do not turn on ...
Answering system 53 Set acc ess code (r emote acc ess code) and mailbox security Y ou can enter a four-digit number ( 0000 - 9999 ) to allow r emote access to your deskset mailbox fr om any touch-tone telephone. Unless you change it, the remote ac cess code is 0000 . This access code is also used f or mailbox security . If you turn this feature on, ...
Answering system 54 Deskset mailbo x setup Notify alert Use this featur e to receive notification calls to any phone number you set (such as a cellular phone or paging device) after a new message has been recor ded to the deskset mailbox. T o receive notification calls, you must save the number you wish to be notified at to the deskset, and then se ...
Answering system 55 T o confirm the call alert number set corr ectly: Y ou can confirm whether the system can successfully call the alert number that you entered. Follow Step 1 through Step 3 in T o set an alert number on page 54. Press DIR or CID to scroll to Calling alert # . Press the Select softkey . The screen displays Press SPKR to confirm th ...
Answering system 56 Deskset mailbo x setup Deskset announcement setup The announcement is the greeting callers hear when calls are answered by the deskset mailbox. The deskset has the default announcement “ Hello, please leave a message after the tone. ” Y ou can use this announcement, or replace it with your own recor ding. The announcement ca ...
Answering system 57 Message playback From the deskset, y ou can play the messages in the deskset mailbox and the general mailbo x. If you have new messages, the syst em plays them (in chronological order) automatically when you ac cess the mailbo x. When playback begins, the total number of messages is announc ed. Before each message, you hear the ...
Answering system 58 Options during playback When a message is playing, you can skip, repeat, or delete the message, or adjust the playback volume. When a message is pl aying on the deskset: Press V OL+ or VOL- t o adjust the message playback volume. Press or /SKIP to skip to the ne xt message. Press or /REPEA T to repeat the message. Pr ess twice t ...
Answering system 59 Message playback Call back to the mailbo x message caller During message playback, you can call back the message caller by pr essing Line 1 - Line 4 , SPEAKER , HEADSET or the Call softkey , or lifting the corded handset. NOTE: If there is no caller ID information of the caller , you only hear a dial tone when you press Line 1 - ...
Answering system 60 R ecor d and deliver memos Memos are messages you record into the deskset mailbox. Y ou can save, play back, and delete them like incoming messages. Y ou can recor d a memo as a reminder to yourself, or send a message to other extensions using the answering system. T o r ecord and deliver a memo to the general mailbox or a hands ...
Answering system 61 R emote ac cess Y ou can access your deskset answering system remotely by dialing your telephone number from any touch-tone telephone. T o r emotely reach the answering system: Dial your telephone number fr om any touch-tone telephone. When the system answers, ent er the four-digit remote access c ode ( 0000 is the default c ode ...
Answering system 62 R emote ac cess 4. Hang up or press to end the call. Cut out the remot e access wallet card at the back of this user’s manual for quick ref erence. NO TES : If the auto attendant is activ e, enter your ext ension number. Wait f or the outgoing announcement to begin, then enter the r emote access code. If you do not enter a val ...
63 Scr een icons, indicat or t ones and lights Indicator t ones Scr een icons 1:Deskset 3 Missed calls Set date & time Redial Menu L1 L2 L3 L4 Line indicator - on when the corr esponding line is in use. Flashes when the corresponding line is on hold. Ringer off - the deskset ringer is off. New a ns wer ing s ys te m mes sa ge - i ndi c ates y o ...
Appendix 64 Lighted display NEW CALL On when there are new or missed calls in the call log. /MAILBO X Flashes when there are new or missed messages in the deskset mailbox. LINE 1-LINE 4 On when a telephone line is in use. Flashes slowly when a telephone line is on hold. Flashes rapidly when there is an incoming call. Indicator lights Scr een icons, ...
Appendix 65 All deleted All directory entries, call log entries or ol d messages in the general or deskset mailbox ar e erased. Busy Failed int ercom or con ference call (ther e are already two cordless handset s or desksets being used). Call *:Base The main telephone base is calling. Call X:Handset X Another system handset is calling. Call log emp ...
Appendix 66 Deskset display scr een messages Please enter another access code. The access code you ar e trying to save already exists in the system. Please set alert # Y ou are trying to confirm the alert number or set the notify alert on or off befor e you set the alert number . Press MENU on MAIN base, select Registration & then Register HS. ...
Appendix 67 If you have difficulty with y our telephone, please try the suggestions below . For customer servic e, visit our website at www .telephones.at t.com or call 1 (888) 915-2007 . In Canada, dial 1 (866) 288-4268 . My deskset doesn’t work at all. Make sur e the power cord is securely plugged in. Make sur e you plug the telephone line cord ...
Appendix 68 My deskset isn’t performing normall y . Make sur e you plug the power cord securel y into the deskset. Plug the power adapter into a diff erent working electrical outl et without a wall switch. Move the deskset closer to the main t elephone base. Y ou might have moved out of range. Reset the deskset. Unplug the electrical power . Wait ...
Appendix 69 I get noise, sta tic, or weak signals even when I’m near the main tel ephone base. If you subscribe to high-speed Internet servic e (DSL - digital subscriber line) through your t elephone lines, you must install a DSL fil ter between each telephone line cor d and telephone wall jack. The filter pr events noise and caller ID problems a ...
Appendix 70 My deskset does not ring when I r eceive a call. Make sur e that the ringer is not turned off (page 13). Make sur e you plug in the power cord securely . The deskset may be too f ar from the main t elephone base. Y ou may have too many e xtension tel ephones on your telephone line t o allow all of them to ring simult aneously . Try unpl ...
Appendix 71 My calls cut in and out while I’m using my deskset. Other electronic pr oducts such as HAM radios and other DECT phones can cause interfer ence with your deskset. Try installing your phone as f ar away as possible from these types of electr onic devices. Do not install the deskset near a microwa ve oven or on the same electrical outle ...
Appendix 72 The tel ephone sys tem does not r eceive call er ID when on a call. Make sur e you subscribe to caller ID with call waiting features fr om your telephone service pr ovider. Call er ID featur e works only if both you and the caller are in ar eas offering caller ID service, and if both telephone service providers use c ompatible equipment ...
Appendix 73 The answering sys tem does not r ecor d messages. Make sur e the answering system is turned on. Make sur e the memory of the answering system is not full. Refer t o the Remaining spac e section in your SynJ SB67118/SB67138 user’s manual. SynJ SB67118/SB67138 user’s manual. When the answering system memory is full, it does not r ecor ...
Appendix 74 I cannot r etrieve voicemail messages. Y our telephone has both a built-in answering system and v oicemail indication. They are independent f eatures and each alert s you to new messages differentl y (page 50). If you subscribe to voic email service fr om your telephone servic e provider , contact your telephone service pr ovider for mo ...
Appendix 75 T aking care of your t elephone Y our deskset contains sophisticated electronic parts, so you must tr eat it with care. Avoid r ough treatment. Place the deskset down gently . Save the original packing materials to pr otect your deskset if you ever need to ship it. Avoid wat er Y ou can damage your deskset if it gets wet. Do not use the ...
Appendix 76 This symbol is to alert you t o important operating or servicing instructions that may appear in this user’s manual. Always follow basic sa fety precautions when using this product to r educe the risk of injury, fire, or electric shock. Safety inf ormation Read and understand all instructions in the user’s manual. Observe all markin ...
Appendix 77 Especially about cor dless telephones Privacy: The same features that mak e a cordless telephone convenient cr eate some limitations. T elephone calls are transmitted between the tel ephone base and the handset by radio waves, so there is a possibility that your cor dless telephone conversations could be inter cepted by radio rec eiving ...
Appendix 78 This equipment complies with Part 68 of the F CC rules and with technical r equirements adopted by the Administrative Council for T erminal Attachments (A CT A). The label on the back or bottom of this equipment cont ains, among other things, a product identifier in the format US: AAAEQ##TXXXX. This identifier must be provided t o your ...
Appendix 79 This equipment has been tested and found t o comply with the r equirements for a Class B digit al device under Part 15 of the F ederal Communications Commission (FC C) rules. These requir ements are intended t o provide r easonable prot ection against harmful interfer ence in a residential installation. This equipment generates, uses an ...
Appendix 80 The A T&T brand is used under license - any r epair , replacement or warr anty service, and all questions about this product should be dir ected to: In the United St ates of America, visit www .tel ephones.at t.com or call 1 (888) 915-2007 . In Canada, call 1 (866) 288-4268 . 1. What does this limited warr anty cover? The manufactur ...
Appendix 81 5. How do you get warr anty service? T o obtain warranty service in the United States of America, visit www .tel ephones.at t.com or call 1 (888) 915-2007 . In Canada, call 1 (866) 288-4268 . NOTE: Bef ore calling for servic e, please review the user’s manual; a check of the PRODUCT’s controls and f eatures may sa ve you a service c ...
Appendix 82 T echnical specifications 1921.536MHz - 1928.448MHz 5 6VDC @400mA 32°F - 122°F 0°C - 50°C RF frequency band Channels Operating temperat ure Deskset voltage (AC adapter output) 100 Vrms - 120Vrms Deskset voltage (A C vol ta ge, 60 Hz ) 3.6V 600mAH Replacement batt ery Backup bat tery Operation Operating time* T alk time (corded hands ...
83 Inde x Index A AC adapter 5 Access code 53, 61 Add the deskset 8–9 Alert tones 63 Announcement 56 Answering calls 21 Answering system 50–62 B Battery char ging 7 Battery inst allation 6 C Caller ID (CID) 44–49 add entries to phone direct ory 48 delete entries 47 review entries 46 Call privacy 25 Call transfer 33–34 Call waiting 24 Chain ...
Index Inde x 84 M Maintenance 75 Making calls 19 Memory match 46 Menu settings 13 Message memo 60 Message playback 57–59 Missed calls indicator 46 Mute 24 N Names enter into dir ectory 39 search 42 Navigation ke ys 1 New message indication 52 Notify alert 54 O On hook dialing 20 P Pause 18, 23, 39, 40, 48 Phonebook (directory) 38 Play back a mess ...
Use th e wal le t c ard bel ow t o hel p y ou r ememb er comma nds t o co ntr ol y our ans wer ing s yste m f rom an y t ouch- tone t eleph one. R emote ac cess wallet car d Fold her e. Cut along dotted line. Call your telephone number , then enter your four-digit ac cess code (preset to 0000 ). Model name: SynJ SB67148 T ype: SynJ SB67148 DE CT 6. ...
© 2010 Advanced American T elephones. All Rights Reserved. A T&T and the A T&T logo are tr ademarks of A T&T Intellectual Pr operty licensed to Advanced American T elephones, San Antonio, TX 78219. SynJ TM is a trademark of Advanc ed American T elephones. Printed in China. Issue 4 A T&T 12/10. www .tel ephones.at t.com ...
AT&T SB67148のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- SB67148の取扱説明書
- AT&Tの製品カード
- パンフレット
- またはAT&T SB67148の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、AT&T SB67148の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、AT&T SB67148の取り付け説明書、サービスマニュアル、簡易説明書、またはAT&T SB67148のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、AT&T SB67148の製品を使用するにあたって最も人気のある説明書を閲覧できます。
AT&T SB67148デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAT&T SB67148を使用するのを助ける技術的文書のことです。説明書は通常、全てのAT&T SB67148ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
AT&Tの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. AT&T SB67148の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAT&T SB67148の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。AT&T SB67148に関してこのドキュメントで見つけることができる全てのヒントの目次
3. AT&T SB67148デバイスの基本機能を使うにあたってのヒント。 AT&T SB67148のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。AT&T SB67148に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAT&T SB67148のメーカー/サービスへの連絡先に関する情報。
AT&T SB67148についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもAT&T SB67148の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAT&T SB67148で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。