-
Smeg A42C-5 - page 1
Contents 1. INSTRUCTIONS FOR SAFE A ND PROPER USE _____________________ 31 2. INSTALLATION OF THE APPLIANCE ______________________________ 33 3. DESCRIPTION OF CONTROLS ___________________________________ 36 4. USE OF THE C OOKING HOB ____________________________________ 43 5. USE OF THE OVENS ___________________________________________ 45 6. AVAIL ...
-
Smeg A42C-5 - page 2
Introduction 1. INSTRUCTIONS FOR SAFE AND PR OPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APP LIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN A N ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKER. WE ADVISE READING THIS MANUAL AND ALL THE INSTR UCTIONS THEREIN BEFORE USING THE COOKER. INSTALLATION MUST BE CARRIED OUT BY QUALIFIE ...
-
Smeg A42C-5 - page 3
Introduction THE I.D. PLATE WITH TECHNICAL DATA, REGISTRATI ON NUMBER AND BRAND NAME IS VISIBLY POSITIONED ON THE REAR PROTECTIVE COVER OF THE APPLIANCE. A COPY OF THE PL ATE IS INCLUDED WITH THE HANDBOOK AND YOU ARE ADVISED TO FIX IT IN THE APPROPRIATE SPACE ON THE INSIDE COVER PAGE. THE PLATE MUST NEVER BE REMOVED. DURING USE THE APPLIANCE BECOME ...
-
Smeg A42C-5 - page 4
Instructions for the installer 2. INST ALLA TION OF THE APPLIANCE This unit is equipped with a type Y fire protec tion, and may be set against walls that are higher than the h ob. Built-in appliance Free-standing installation 2.1 Electrical connection Check that the voltage a nd dimensioning of the supply l ine correspond to the characteristics sho ...
-
Smeg A42C-5 - page 5
Instructions for the installer The appliance is fitted with a terminal board at the rear for electrical connections (see following di agram). To access, remove the rear cover. For operation on 380-415V3N ∼ : use an H05RR-F-type five-core cable (5 x 2.5 mm 2 ). For operation on 380-415V2N ∼ : use an H05RR-F-type four-core cable (4 x 4 mm 2 ). Fo ...
-
Smeg A42C-5 - page 6
Instructions for the installer Complete wiring up to power supply with an appropriately r ated five-core plug (see data plate) or, in c ase of operation from a 220-240V ∼ pow er supply, with a three-core plug. Make sure that plug and wall socket are of the same type and are i n conformity with reg ulations in force. Make sure that the appliance i ...
-
Smeg A42C-5 - page 7
Instructions for the user 3. DESCRIPTION OF CONTROLS 3.1 Front control panel All the cooker controls and co mmands are o n the front panel. The user has only to press the central key for 1/2 seconds to enab le use of the oven on first use or after a pow er blackout. (only for the main oven) DESCRIPTION OF SYMBOLS FRONT LEFT-HAND COOKING ZON E MAIN ...
-
Smeg A42C-5 - page 8
Instructions for the user Double heating The circle next to each knob indicates the cooking z one it controls. To heat the inner cooking zone, turn the knob to the desired position ( 1 to 9 ). To heat both the inner an d outer cooking zon es, turn the knob to or ; and then release. The k nob will thus return to 9 . To adjust heating intensity, rota ...
-
Smeg A42C-5 - page 9
Instructions for the user AUXILIARY OVEN THERMOSTAT KNOB Selection of cooking tem perature is carr ied out by turning the knob clockwise to the required temperature, between 5 0° and 250°C. The tell-tale light comes on to indicate that the oven is warming up. When it goes out it means that the requ ired temperat ure has been reached. Intermittent ...
-
Smeg A42C-5 - page 10
Instructions for the user 3.2 Electronic Analogue Clock The instructions provided appl y to the main oven only. LIST OF FUNCTIONS MINUTE-MINDER BUTTON AUTOMATIC SWITCH-OF F TIMING BU TTON TIME SETTING AND RESET VALUE DECREASE BUTTON VALUE INCREASE BUTTON 3.2.1 Setting the time When the oven is use d for the first time, or after a power blackout, th ...
-
Smeg A42C-5 - page 11
Instructions for the user 3.2.2 Minute-minder This function does not stop cook ing but just triggers the beeps. - When the key is pressed the displa y illuminates, appearing as sh own in figure 1; - Press the or keys withi n 6/7 seconds to set the minute-minder. W henever a key is pressed, 1 outside segment, representing 1 cooking minute wi ll ligh ...
-
Smeg A42C-5 - page 12
Instructions for the user 3.2.3 Programming Cooking duration time: the 2 nd button can be used to s et the cooking time. Before setting it, turn the thermostat to the cook ing temperature of choice and the function selector knob to any setting. To set the cookin g time, proceed as follows: - Press the key for 1/2 seconds; the pointer will move to p ...
-
Smeg A42C-5 - page 13
Instructions for the user Cooking start: as well as setting a cooking dur ation time, the user c an also set the cooking start time (up to 12 hours after the c urrent time). To set the cooking start/end time, proceed as follows. - Set the cookin g duration time as described in the previ ous point. - W ithin 6/7 seconds after the last time the or ke ...
-
Smeg A42C-5 - page 14
Instructions for the user 4. USE OF THE COOKING HOB 4.1 Cooking zones The appliance features 4 c ooking zones of different diameter and po wer. Their positi on is clearly indicated by circles and the heat given off is defined by the markings on the glass surface. The 4 cooking zones are of the HIGH-LIGHT type and co me on after a few seconds of bei ...
-
Smeg A42C-5 - page 15
Instructions for the user Take care not to spill sugar or sweet mixtures on to the cooking hob when hot. Never place m aterials or substances which may melt ( plastic or aluminium f oil) on to the cooking hob. In the event, promptly switch off and remove the molten material with the scraper provided while the top is still warm to prevent it from be ...
-
Smeg A42C-5 - page 16
Instructions for the user 5. USE OF THE O VENS 5.1 Warnings and general advice Before using the oven for the first time, pre-heat it to maximum temperature (250°C) lo ng enough to b urn any manufacturing oily residues which could give the food a bad taste. The user has only to press the central key for 1/2 seconds to enable use of the oven on firs ...
-
Smeg A42C-5 - page 17
Instructions for the user 6. A V AILABLE A CCESSORIES The main oven has 4 support for positioning plates an d racks at various heights and has upper protection. The auxiliary oven has 2 support . Oven grill: for cooking food on plates, small cakes, roasts or food requiring light grillin g. Plate grill: for placing above plate for cooking foods that ...
-
Smeg A42C-5 - page 18
Instructions for the user 7. COOKING HINTS In fan-assisted mode pr eheating shou ld be carried out at 30/40°C above the cooking temperature. Thi s cons iderably shorte ns cooking times a nd reduces power consumption, as well as giving better cooking results. Keep the oven door closed during cooking 7.1 Hot-air cooking FUNCTION SWITCH THERMOSTAT SE ...
-
Smeg A42C-5 - page 19
Instructions for the user 7.2 Hot-air grilling FUNCTION SWITCH THERMOSTAT SELECTOR SWITCH FROM 50° TO 250°C Ensures uniform heat distrib ution with gr eater heat penetr ation into the food. Food will be lightly brow ned on the outside and remai n soft inside. Keep the oven door closed during cooking. Heating up time must not exceed 60 minutes. Ke ...
-
Smeg A42C-5 - page 20
Instructions for the user 7.4 Defrosting THERMOSTAT IN POSITION The flow of air produced by th e fan ensures quicker defrosti ng. The air circulating inside the o v en is at room temperature. The advantage of defrosting at room te mperature is that it does not alter the taste and appear ance of the food. 7.5 Traditional cooking THERMOSTAT SELECTOR ...
-
Smeg A42C-5 - page 21
Instructions for the user 7.6 Delicate cooking THERMOSTAT SWITCH IN POSITION Ideal for pastries and c akes with wet covering and little sugar and damp desserts in moulds. Excellent results can also be achieved i n completing cooking at the bottom and wit h dishes requiring heat in th e lower area in particular. The plate is best inserted at bottom ...
-
Smeg A42C-5 - page 22
Instructions for the user 7.8 Spit cooking FUNCTION SWITCH This type of cooking is only for the main oven . Use it for small size pieces. Prepare the food on the spit rod and block fork screws A . Insert the frame B in the third level from the bottom. Remove handle D an d position the spit rod so the pulley E re mains guided on frame B . Completely ...
-
Smeg A42C-5 - page 23
Instructions for the user 8. CLEANING AND MAINTENANCE 8.1 Cleaning the glazed ceramic hob Before any intervention, disconnect the power supply of the device. The cooking hob shou ld be regularly cleaned; best after ev ery use, once the residual heat signal lamps have gone off. NEVER USE A STEAM JET TO CLEAN THE APPLIANCE. Smudges from aluminium-bot ...
-
Smeg A42C-5 - page 24
Instructions for the user 8.2.2 Food stains or residues Do not use metallic sponges or sharp scrapers: they will damage the surface. Use normal non-abrasive pr oducts for steel, and a wooden or plastic tool if necessary. Rinse thoroughly and dry with a soft cloth or deerski n. Do not allow residues of sugar y foods (such as jam) to set inside the o ...
-
Smeg A42C-5 - page 25
Instructions for the user 1) 2) 8.4 Door glass These should always be kept very cl ean. Use absor bent kitchen paper or, in case of hard to rem ove dirt, wash with a wet s ponge and ordinary detergent. 54 ...
-
Smeg A42C-5 - page 26
Instructions for the user 9. EXTRA ORDINAR Y MAINTENANCE Ovens periodically requir e small mainten ance interventions or replacement of parts s ubject to wear and tear such as gaskets, electric bulbs etc. Specific instructions fo r eac h intervention of this type appear below. Before performing any operat ions requiring access to powered parts, swi ...
-
Smeg A42C-5 - page 27
Instructions for the user 9.2 Removing the door Open the door completely and fit the pins (supplied) into the holes from the inside. Close the door to an angle of about 45°, lift it and remove it from its seat. To replace, fit the hi nges into the grooves provided, then l ower the door until it comes to rest and extract the pins. If the pins are l ...
Smeg A42C-5についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもSmeg A42C-5の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSmeg A42C-5で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。