TP-Link TX-VG1530の取扱説明書

135ページ 関係なし
ダウンロード

ページに移動 of 135

Summary
  • TP-Link TX-VG1530 - page 1

    TX- VG 1530 N 300 Wireless VoIP GPON Router Rev: 1.0.0 1910010904 ...

  • TP-Link TX-VG1530 - page 2

    COPYRIGHT & TRADEM ARKS Specificat ions are su bject to change w ithout notice. is a registered trade mar k of TP - LINK TECHNOLOGIES C O., L TD . Other brands and prod uct names ar e trademar k s or registered t rademar k s of their res pective ho lders. No part of th e specificatio ns may be r eproduc ed in any f orm or by any mean s or used ...

  • TP-Link TX-VG1530 - page 3

    FCC ST A TEME NT This equip ment has been t ested and found to co mply with t he limits for a Class B digital devic e, pursuant to part 15 of the FCC Rules. These li mits are designed t o provide r easonab le protectio n against har mful interfer ence in a resident ial instal lation. Th is equipment gener ates, uses and ca n radiate radi o freque n ...

  • TP-Link TX-VG1530 - page 4

    Canad ian Co mpliance St atement This device co mplies with I ndustry Canad a license - exempt RS S standard( s). Operat ion is subject to the follow ing two con ditions: (1) This device may not cause int erference, and (2) This devic e must acce pt any interference, inclu ding interfere nce that may caus e undesired operation o f the devic e. Cet ...

  • TP-Link TX-VG1530 - page 5

    Продукт се ртифікова н о згідно с правилами системи УкрСЕП РО на відповід ність вимогам норматив н их доку менті в та вимога м, що пер едбачені чи н ними з аконода вчими акт ами України. Safe ty Inform ...

  • TP-Link TX-VG1530 - page 6

    TP - LINK TECHNOLOGIES CO., L TD DECL ARA TION O F C ONF ORMITY For the follow ing equi pment: Product Des cription: N 300 Wireless VoIP GP ON Router Model No.: T X- VG 1 530 Tradema rk: TP- LIN K We declare under our own respo nsibilit y that the ab ove produ cts s atisfy all the techn i cal regulatio ns applica ble to the pr oduct wit hin the sco ...

  • TP-Link TX-VG1530 - page 7

    CO NTENTS Package C ontent s .................................................................................................... 1 Chapt er 1. Product Overview ................................................................................... 2 1.1 Overview of the GPON router ....................................................................... ...

  • TP-Link TX-VG1530 - page 8

    4.4.9 IPSec VPN ......................................................................................................................... 35 4.5 DHCP Server .............................................................................................................. 38 4.5.1 DHCP Settings ........................................................... ...

  • TP-Link TX-VG1530 - page 9

    4.10.2 Static Rou te ...................................................................................................................... 77 4.10.3 RIP Settin gs ...................................................................................................................... 78 4.11 IPv6 Route Settings ....................................... ...

  • TP-Link TX-VG1530 - page 10

    4.21.5 SNMP Sett ings ............................................................................................................... 110 4.21.6 Backup & Res tore ........................................................................................................... 111 4.21.7 Factor y Defaults .............................................. ...

  • TP-Link TX-VG1530 - page 11

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Package C ontent s The follow ing contents s hould be found in y our package :  One TX- VG 1530 N 300 W ireless Vo IP GP ON Router  One P ower Adapter for TX- VG 1530 N 300 Wireless VoIP GP ON Router  Quick Installat i on Gui de  One RJ45 ca ble  One Resourc e CD for TX- VG 15 ...

  • TP-Link TX-VG1530 - page 12

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Chapter 1. Product Overview Thank you for c hoosing th e TX- VG 1530 N 300 Wi reless VoIP GP ON Route r . 1.1 Ove r vi ew of the GPON r outer TP - LINK ’ s N 300 Wi reless Vo IP GPON Router TX- VG 1530 is a next - generation Gi gabi t P as si ve Optical Netw ork (GPON) i ntegrated acc ess ...

  • TP-Link TX-VG1530 - page 13

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 1.2 Main Fea tures  All - in - One: High spe ed GPON ONT, NAT Router , 4 - port Sw itch, W ireless N Access Point an d V oIP Gateway i n one devi ce provide s a one - stop networking so lution .  Complies wit h ITU G.984. 1, ITU G.984. 2, ITU G.984. 3 and ITU G.984.4, providing you com ...

  • TP-Link TX-VG1530 - page 14

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 1.3 P anel La yout 1.3.1 The Front Panel Figure 1-1 The r outer ’s LEDs are l ocated on t he front pan el (Vi ew from left t o right) . They indicate the device’s w orking stat us. For det ails, please re f er to LE D Explanati on. L ED Ex plan ati on: Na me Colour Status Indica tion ( P ...

  • TP-Link TX-VG1530 - page 15

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide ( WPS ) Green On A wireless dev ice has bee n successfully adde d to the netw ork by W PS function. Fl ash W PS hands haking is in pr ocess and wil l continue for about 2 minu tes. Please press th e W PS button on oth er wire less devices t hat you want to add t o the network whil e th e LE ...

  • TP-Link TX-VG1530 - page 16

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  USB : The USB port con nects t o a USB storag e device or a USB printer .  L AN 1 , L AN 2 , L AN 3 , L AN 4 : Through the se port s , you can con nect the Rout er to your PC or the other Ether net netw ork dev i ces.  WiFi: The sw itch for the WiFi funct ion.  RESE T : There ar ...

  • TP-Link TX-VG1530 - page 17

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Chapter 2. Connecting the GPON R outer 2.1 System Requirement s  B roadban d Internet Access Ser vice ( F iber ).  PC s with a working Eth ernet Adapter and an Et hernet cab l e with R J45 conn ectors .  T CP/ IP protocol on eac h PC .  W eb brows er, such as M icrosoft Internet ...

  • TP-Link TX-VG1530 - page 18

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Not e: The diamet er of the s crew , 3.6 mm <D < 8 mm, and the dist ance of t wo screw s is 152.37 m m. The screw that project from th e wall need arou nd 4mm based, and t he length of t he screw nee d to be at least 20m m to withsta nd the w eight of the prod uct. 2.3 Connecti ng ...

  • TP-Link TX-VG1530 - page 19

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 2-2  No te: Only green S C/APC inter face suits the OP T ICAL port. 9 ...

  • TP-Link TX-VG1530 - page 20

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Chapter 3. Quick Inst allation Guide This chapt er will s how you how t o configure the basi c functions of y o ur TX- VG 1530 N 300 W irel ess VoIP GP ON Router u sing Quick Setup Wiz ard within minute s. 3.1 TCP/I P C onfiguration The default I P address o f the TX- VG 1530 N 300 W ireless ...

  • TP-Link TX-VG1530 - page 21

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide You can chec k it follow ing t he steps below: 1) Is the co nnection bet ween your PC and th e router corr ect? The LEDs o f LAN port which y ou link to the d evice and the LE Ds on your PC's adapter shou ld be lit. 2) Is the T CP/IP c onfi gurat ion for y our PC correct ? If the router ...

  • TP-Link TX-VG1530 - page 22

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 2. Af te r you r s ucce ssf ul log in, y ou will see the Login screen as show n in Figure 3-5. Figure 3-5 3. The GPON ro uter supports SN authe ntication and CTC authent i cation , y ou can select one o f them accor ding to your ISP requi rem ent . If SN authenticati on is required , choose ...

  • TP-Link TX-VG1530 - page 23

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 3-6 If CTC authent ication is required , ch oose Ne tw o rk → GP ON CTC Settings in the main men u, the GPON Con figuration s creen w ill appear, enter the GPON Use rnam e and GPON Passwor d provided by your ISP and then clic k Sa ve . Figure 3-7 4. Choose Pon → Con nec t Statu s ...

  • TP-Link TX-VG1530 - page 24

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 3-8  No te: Once the ONU State in not r egistered, pleas e the GPON infor mation and t ry again with t he correct settings. C hoose N e tw o rk → WAN Settings in the main menu , the WAN Interf ace scre en will appear, then cl ick Ad d to add a new ent ry. I n the next scr een y o ...

  • TP-Link TX-VG1530 - page 25

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 3-9 The basic set tings for y our GPON rou ter ar e complet ed. Please tr y to log on to website t o test y our Internet c onnectio n . 15 ...

  • TP-Link TX-VG1530 - page 26

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Chapter 4. Configuring the GPON R outer This chapt er will s how each W eb page's key function and the conf iguratio n way . 4.1 Log in After your succ essful logi n, you w ill see the twen ty one main menus o n the left of the W eb - bas ed utility. On the right, there are the corresp ...

  • TP-Link TX-VG1530 - page 27

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4-1 4.3 PON Choose “ PON ”, there are f our subm enus under t he main menu : C onnec t Stat us , Optic al Sta tus , Statistics and A dvance . The d etailed exp l anation s for each sub menu are pro vided below. 17 ...

  • TP-Link TX-VG1530 - page 28

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.3.1 Connect Status Choose “ PON ”  “ Connect Status ” , the GPON Stat us screen will ap pear, c lick Refr esh to up date this page, w h ich show s you the current G PON Sta tus. Here we use CTC aut henticatio n as an exam pl e (shown in Fi gure 4-2) . Figure 4-2  C onn ectio ...

  • TP-Link TX-VG1530 - page 29

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4-3 C li ck Refresh to update this page . 4.3.3 Statis tics Choose “ PON ”  “ Sta tistics ” , the traffic statist ics scre en will appear (show n in Figure 4-4) , click Refresh to update this page, and then you can view the statistics of the GPON ro uter , including GPON tr ...

  • TP-Link TX-VG1530 - page 30

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.3.4.1 F orwar ding R ules Choose “ P ON ”  “ Adv ance ”  “ Forwardi ng Rules ”, and you will see the GPON F orw ardi ng Rul es Ta ble in the scree n sim ilar to Figure 4-5. Figure 4-5 4.3.4.2 IOT Log Choose “ PON ”  “ A dvance ”  “ IOT Lo g ”, and you wi ...

  • TP-Link TX-VG1530 - page 31

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.4.1 WAN Settin gs Choose “ Ne tw or k ”  “ WAN Settings ”, and you w ill see the W AN Port Informat ion Table i n t he screen similar t o Figure 4- 7 , which descri bes the WAN port settings a nd the relevant manipulat ion to each inter face. Th ere are four differ ent configur ...

  • TP-Link TX-VG1530 - page 32

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4-8 4.4.1.1 Static IP Select thi s option if your I SP prov ides static IP in formation to you. You shou l d set st atic IP ad dress, IP subnet ma sk, and gat eway address in the screen b elow . 22 ...

  • TP-Link TX-VG1530 - page 33

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4-9 V L AN Con figur ation:  Enable VLA N : Enab le or disable this fun ction. Virt ual LAN ( VLAN) is a grou p of devic es on one or more LANs t hat are config ured so that they can communic ate as if they were attache d to the same LAN, w hen in fact they are located on a number ...

  • TP-Link TX-VG1530 - page 34

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Default Gateway: select a W AN Inter face from the drop - dow n list as the IPv4 defa ult gateway .  Ena ble IP v6: Chec k the box to enab le IPv6.  IP v6 A ddress : Enter t he IP v6 address in d otted - dec imal notati on provid ed by y our ISP.  Prefix leng th: Enter the lengt ...

  • TP-Link TX-VG1530 - page 35

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 10 C lick the Sav e button t o save t he settings. 4.4.1.2 Dynamic IP S ele ct this opt ion , the GPON rou ter wi ll be able to obtain IP net wor k informati on dynamical ly from a DHCP serv er prov ided by your IS P. 25 ...

  • TP-Link TX-VG1530 - page 36

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 11 Clic k A dvanced , adv anced selec tions for W AN S ervice S etup can be s hown.  M TU (by tes) : Maxi mum Tr ansmission U nit Size. Check this box t hen y ou can chan ge the MT U si ze. Th e def au lt M TU value is 1 500 Byt es . It is not reco mmended t hat you c hange the ...

  • TP-Link TX-VG1530 - page 37

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Get I P Un icast : This is disabl ed by default. T he minority of DHCP Server of ISP will not support to enable this. W hen the r oute is conn ected right but IP cannot get, y ou can select t his box.  S et DNS Server manually: C hoose “ Set DNS Ser ver manual ly ” , y ou can set ...

  • TP-Link TX-VG1530 - page 38

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Cho ose t he rig ht connec tion ty pe accordi ng to y our needs: For PPPo E connection, you can select Connect on d emand or Connect automaticall y or Connect m anuall y . Connect on demand is dep endent on t he traffic. If ther e is no traffic (or Idle ) for a pre - specified perio d of ...

  • TP-Link TX-VG1530 - page 39

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 13  No te: After you finish the Int erne t configurat ion, please click Sa ve to make the setti ngs t ake effect. 4.4.2 LAN Settings Choose “ N etw o rk ”  “ L AN Settings ” menu, and you w ill see the LA N screen (show n in Figur e 4- 14 ). Pleas e configure t he par ...

  • TP-Link TX-VG1530 - page 40

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Enab le I GMP S noop ing: If you select the opt ion, please cho ose the IGMP Mode : Standard Mode or Bloc king Mode.  Enable Seco n d IP: You can configure t he GPON rou ter ’s second IP Addre ss and Subnet Mask for LAN Inter face th r ough w hich you can also access to the W eb - b ...

  • TP-Link TX-VG1530 - page 41

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide I f DHCPv6 Serv er is selected, please com plete the f ollowing paramet ers. Figure 4- 16 • Start IPv6 Addres s: Ent er a value for the DHC P v6 serv er to start with when issuing IP v6 addresses. • End IPv6 A ddress: Enter a value for the DH CP v6 server to end w ith when issuing I P v6 ...

  • TP-Link TX-VG1530 - page 42

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.4.4 MAC Clone Choose menu “ Netw o rk ”  “ M AC Clone ”, you can configur e the MAC add re ss of the W AN Interfac e as shown bel ow . T he WAN Inter face List displays t he WAN Interfaces y ou have configured o n the section 4.4. 1 WA N Settings , and its default MA C Address. ...

  • TP-Link TX-VG1530 - page 43

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide • L2TP Passt hroug h : Layer Tw o Tunnelin g Protocol (L2TP) is the method used to enab le Poi nt - to - Point se ssions vi a the Inter net on the Lay er Two level. To a l low L2 TP tunnels t o pass throu gh the GPO N router , cl ick Enabl e . • IPSec Passt hrough : Internet Prot ocol se ...

  • TP-Link TX-VG1530 - page 44

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 22 GPO N P assw o rd  GPON Pa sswo rd: Displa ys the factor y default pass word.  New Pas sw ord: Enter the passw ord prov i ded by your ISP. C li ck Save to ma ke the sett ings take effect. GPON S N  GPON SN: Displ ays the f actory default SN.  New SN: Enter the S N pr ...

  • TP-Link TX-VG1530 - page 45

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide C lick the Sav e button t o save y our settings. 4.4.9 IPSec VPN Choose “ Netw o rk ”  “ IPSec VPN ”, you can a dd/ r emove or e nable /d is able the IPSec tunnel connectio ns on th e s creen as shown in Figur e 4- 24 . Figure 4- 24 This sect ion will guide yo u to conf igure a VP ...

  • TP-Link TX-VG1530 - page 46

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 25  IPSec Connecti on Name: Enter a name for your V PN .  Remote IPS ec Gateway Address ( URL ): Enter the destinat ion gateway IP address in th e box which is th e public WA N IP or Do main Na me of the remot e VPN server endpo int. ( Fo r example: I nput 219.134. 112.247 in ...

  • TP-Link TX-VG1530 - page 47

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide After co mplete the basic set tings and c lick Sav e/Apply in bot h Devi ce1 and Devic e2 , PC s i n LA N1 could comm uni ca te with PCs in remote LAN2. (For example: You can ping th e IP address of PC 2 which is 192.168.2.1 00 in PC1)  No te: The VPN Servers Endp oint from both ends m us ...

  • TP-Link TX-VG1530 - page 48

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  No te: If you want to change the defau l t settings o f Adv anced Settings , please make sure that bot h VPN server endpoints use the same Encry ption Algorithm, I ntegrity Alg orithm, Dif fie - Hellm an G roup and Key Life ti me in both p hase1 a nd pha se2 . 4.5 DHCP Server Choose “ ...

  • TP-Link TX-VG1530 - page 49

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide address ha s expired, the user w ill be auto matically assigne d a new dynamic I P address. The default is 24 ho urs.  Default Gateway - (Optional ): It is s uggested to input the IP addres s of the LAN port of the GPON route r. The default v alue is 192.16 8. 1 .1 .  Default Domain - ...

  • TP-Link TX-VG1530 - page 50

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Valid Tim e : The ti me of the DHCP c lient lease d. After t he dynamic IP addr ess has expired, a new dyna m ic IP address will be autom atically assigned to t he user. You cannot cha nge any of the values on this p age. To updat e this page and to s how the current attached d evices, c ...

  • TP-Link TX-VG1530 - page 51

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 2. Modify t he information. 3. Click the Save button. Clic k the Enable / Disable Selected but ton to make selected entries en abled / disabl ed . Click the Delet e Sele cted button to select ed entri es . 4.5.4 Conditional Pool Choose menu “ DHCP Server ”  “ Conditi onal Po ol ” ...

  • TP-Link TX-VG1530 - page 52

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Clic k the Enable / Disable Selected but ton to make selected entries en abled / disabl ed . Click the Delet e Sele cted button to select ed entries . 4.6 Wire less Choose “ Wireless ”, there ar e s even subm enu s to configure W ireless LAN settings . C lick an y of them, and y ou will ...

  • TP-Link TX-VG1530 - page 53

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide SSID. The wire l ess stat ions connect ed to different SSIDs can not communi cate with eac h other.  Mode : Select the desire d mode. 11b only : Select if all of y our wireless c l ients are 80 2.11b. 11g only : Select if all of y our wireless c l ients are 80 2.11g. 11n only : Select onl ...

  • TP-Link TX-VG1530 - page 54

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  SSID ( to be br idged) : The SSID of the AP y our GPON router is go ing to conn ect to as a client. Y ou can also use t he search fun ction to select t he SSID to join.  BSSI D (to be bri dged) : The BSSID of the AP y our GPON router i s going t o connect to as a client. Y ou can also ...

  • TP-Link TX-VG1530 - page 55

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  WPS : Enable or disab le the W PS function h ere.  Current PIN : The current value of the GPON ro uter 's PIN is displayed here. T he default PI N of the GPO N router ca n be found in the label or User Guide.  Restore PI N : Restor e the PIN o f the GPO N router to its defaul ...

  • TP-Link TX-VG1530 - page 56

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Refer bac k to your client device or its doc ument ation for further in st ructions. II. Enter the client dev ice ’ s PIN on t he GPON router Use this metho d if your client dev ice has a W i - Fi Protected Set up P IN num ber . Ste p 1: Keep the defau lt WPS S tatus as E na bled and c l i ...

  • TP-Link TX-VG1530 - page 57

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 37  SSID : S ele ct the SS ID from the drop - dow n list .  Disable Wireless Se cur it y : If you do not want to use w ireless secur ity, check this rad io button. But it ’ s stro ngl y recomme nded to ch oose one o f the follow ing modes to enable security .  W P A/ W P ...

  • TP-Link TX-VG1530 - page 58

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide • Wireless Pas s word - You can enter AS CI I characters bet ween 8 and 63 cha racters or 8 to 64 Hexadec imal characters. • Group Key U pdate Pe riod - Specif y the group key update interval in seconds. The v alue should be 30 or above. Enter 0 t o disable the updat e.  W P A/ W P A2 ...

  • TP-Link TX-VG1530 - page 59

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide • K e y T yp e : You can s elect t he W EP key lengt h (64 - bit, or 128 - bit, or 152 - bit. ) for encr yption. "Disa bled" m eans this W EP key ent ry is invalid. • 64 - bit : You can e nter 10 hexa decimal digits (any combination o f 0 - 9, a- f , A - F, ze ro k ey i s not p ...

  • TP-Link TX-VG1530 - page 60

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Start Time , E nd T ime : Y ou can se l ect al l day - 24 h ours or you may enter the Start Time and End Time in the corres ponding f ield.  Add: Click this button to add y our selected time to the be low table. Click the Clear Schedule button to cl ear your settings in the t able. Cl ...

  • TP-Link TX-VG1530 - page 61

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 2. Give a sim ple descr iption for t he wirel ess stat ion in the Descrip tion field. For exa mple: Wireless stat ion A. 3. Sel ec t Enabl ed or Di sabled f or this entry on the Sta tu s d rop - down list. 4. Click the Save button to sav e this entry . To edit or delet e an existi ng entry : ...

  • TP-Link TX-VG1530 - page 62

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 42  Transmit Power : Here you ca n specify the trans mit pow er of G PON router . You can select High, Middl e or Low whic h y ou would like. High is the defau l t setting a nd is re commen ded .  Beacon Int erval : Enter a value betwee n 2 5- 1000 m illisecon ds f or Beacon ...

  • TP-Link TX-VG1530 - page 63

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.6.7 Wireles s Statu s Choose menu “ Wi reless ”  ” Wireless Stat us ”, you can se e the MA C Addres s, Current Status, Received Packets and S ent Pac kets for each co nnected wireless stat ion. Figure 4- 43  M AC Ad d r e s s : The connected w ireless station's M AC addr ...

  • TP-Link TX-VG1530 - page 64

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 44 You can ena ble or disable Guest Networ k . W hen y ou enabl e this f unction , you coul d set wi rel ess parameters for Guest Netw ork.  SSID : T he guest network na me . W hen setting up a Guest networ k, it is strong ly recomme nded to use a nam e that easily distinguis he ...

  • TP-Link TX-VG1530 - page 65

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.7.2 Guest Net work Statu s Choose men u “ Guest Network ”  “ Guest Net work S tat us ”, y ou can se e the M AC Addr ess, Current St atus, Receiv ed Pac kets and Sent Packet s for each c onnected wir eless station. Figure 4- 45  M AC Ad d r e s s : The connected w ireless stat ...

  • TP-Link TX-VG1530 - page 66

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 46  Profile Name : Displays th e profile name of the acco unt.  Registrar Address: Display s the IP address or dom ain name of th e SIP Registrar server.  Pho ne Num ber: Disp lay s the phone n umber of the accou nt.  Status : Display s the status of the acc ount. “Do ...

  • TP-Link TX-VG1530 - page 67

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide SIP A cco unt A dvanced  Profile Name: As si gn a name to identify the profile. Please note that special char acters a re not allowed.  Disp lay Name: Assign a na m e for your account. T his nam e is the Caller - ID y ou want to be displayed o n your frien d’s display panel, whic h c ...

  • TP-Link TX-VG1530 - page 68

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 48 C onf i gure the current Dig itMap settings, and c lick the Save button to make the configurat ion take effec t. 4.8.3 Dial Plan Choose “ Voice ”  “ Dial Plan ”, you can see the n ext submenus: T his s ection includes D ial Plan List and Forbidde n Call. The f unction ...

  • TP-Link TX-VG1530 - page 69

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Ena ble: Displays the i nterface(s) enabled in th i s plan.  Remove: Check the box and then c l ick the Re mo ve button below so that the very plan w ill be deleted.  Ed it: Cl i ck the Edi t button to modify the v ery plan. T o add a dial plan, click the Add button in Figure 4- 49 ...

  • TP-Link TX-VG1530 - page 70

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide • Add Num ber : If it is selec ted, the or iginal phone nu m ber will be se nt out with what y ou set in “ Add Nu m ber ” fie ld added ahe ad. Tak e t he 3 rd dial plan in Figure 4- 50 as an e xam ple . If you dial 0186 55556666, num ber 1795101865 555666 will be dia led out to ma ke a ...

  • TP-Link TX-VG1530 - page 71

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.8.4 Phone Setup Choose “ Voice ”  “ Phone Se tup ”, you will see the s creen similar to Figure 4- 53 . This sectio n allows you t o configure ph one settings f or pho ne 1 and phone 2. Figure 4- 53  Pho ne Ena ble: Chec k the box behi nd to enable th e functio n. Dial S ettin ...

  • TP-Link TX-VG1530 - page 72

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Dial Restriction : Choose the pull - down m enu to set restr iction for out g oing ca lls. • Non e: Allow al l numbers t o be dialed out. • Al l: Forbid all number s to be dialed out . • Acc ording to For bidden Cal l: Number s will be di aled out acc ording to set tings in Forbidd ...

  • TP-Link TX-VG1530 - page 73

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.8.5 A dvanced Setup Choose “ Voice ”  “ A dvanced Se tup ”, you w ill see the next scre en in Figure 4 - 54 . Figure 4- 54 SIP Advanced Setu p:  Bound Interface Name: Bound Inter face deci des where t o send/rec eive the VOIP traff ic . Ea sy wa y to select the interface is t ...

  • TP-Link TX-VG1530 - page 74

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Registration R etry Interval(s): Set t he time durati on for y our SIP Registrar s erver to keep your regist ration recor d. Befor e the time ex pires, the GPON router will send a nother r egister request to SIP R egistrar a gain. I f you are unsure o f it, please a lways keep the defaul ...

  • TP-Link TX-VG1530 - page 75

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Click the Save button to make t he config uration t ake effect. If you want to delete the entr y, chec k the Remo ve box first, and then clic k the Re move button. 4.8.7 Call Log C hoose “ Vo ice ”  “ Call Log ” , you will see t he screen as shown in F i gure 4- 58 . This functi o ...

  • TP-Link TX-VG1530 - page 76

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.8.8 Call Fire wall Choose “ Voice ”  “ Call Firewall “ , you can see the n ext subme nus: Call F irew all c an be use d to control incomin g calls. Thi s section int roduces ho w to configure the Call F irew all. Choose “ Vo ice ”  “ Call Firewa ll “  “ Mode Sett ...

  • TP-Link TX-VG1530 - page 77

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide T o add a new entr y, click t he Ad d button and you wi ll see the scr een as shown i n Figure 4- 62 . Figure 4- 62 E nter a num ber with the l ength in the range o f [ 3 , 16]in the fie ld of Black List N umber and Cl ick the Save button to make the con figurat ion take effe ct, then y ou w ...

  • TP-Link TX-VG1530 - page 78

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.8.9 USB Voi ce Mail Choose “ Voice ”  “ U SB Voice Mail “ , you will see the s creen as shown i n Figure 4- 65 . USB Voice mail is used to r ecord voice mes sag e s when the call is n ot answered. To use this function, p lease make sure an ex ternal USB hard driv e/USB flash dis ...

  • TP-Link TX-VG1530 - page 79

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 66  E nable Local P lay Operatio n Notif y: Chec k this box so t here will be soun d i ndication for operation w hen you liste n to the voice messa ge s . Th is is enable d by default. I f you are v er y famil iar with the oper ation s, you can disa ble it.  En able G lobal W ...

  • TP-Link TX-VG1530 - page 80

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 3) Input the PIN co de accord i ng to the not ification. 4) Y ou can listen to all the n ew messag es after the PI N code is validated. C li ck Sa ve to save your conf iguratio ns. Clic k Back to go bac k to the previou s page, i. e. Figure 4- 65 . 4.9 USB Sett ings There are six submenus un ...

  • TP-Link TX-VG1530 - page 81

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Capacity : The storage capacity of the USB driv er.  S tatus: Indicates the s hared or non - shar ed status of the volu me. Ac t i v e m e ans vol um e can be shar e d, whi le Inac tive means volume can not b e shared. I f Deactiv ate i n A cti on f iel d i s enabled, Inac tive will b ...

  • TP-Link TX-VG1530 - page 82

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4. Re - ent er the passw ord in the Confirm Password field. 5. C lick the Set button, an d then a new entry will be added in the t able . 6. C lick the A pply butt on to apply y our settings. C lick the Refresh but ton to refres h this page i mmediately . 4.9.3 Storage Sharing Choose menu ? ...

  • TP-Link TX-VG1530 - page 83

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 70 2. Click the Brow se button, and t hen sel ect the S elect Volume from the drop - do wn list . 3. Enter disp lay name o f the share folder in Share Name fil ed . 4. Clic k the A pply but ton to apply the sett ings . You can clic k the upper but ton to go to the upper folder C li ...

  • TP-Link TX-VG1530 - page 84

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 71  Serv er Status : Indicat es the FTP Ser ver's curr ent stat us.  Internet A ccess: Enable or dis able this f unction.  Internet Address: If Internet A ccess is enable d, WAN IP wil l be displayed he re.  Service Port : Enter t he FTP Port number t o use. The de ...

  • TP-Link TX-VG1530 - page 85

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 72 2. C lick the Brow se button, and t hen selec t the S elect Volume from the drop - do wn list . 3. Enter disp lay name o f the share folder in Share Name fil ed . 4. Clic k the A pply but ton to apply the sett ings . You can clic k the upper but ton to go to the upper folder. C ...

  • TP-Link TX-VG1530 - page 86

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Server Enable : Select this box t o enable th is functi on.  Server Name : The na me of this Med ia Serv er. T o add a ne w share fold er for your m edia serv er , pl ease f ollow the instruction s below: a) Clic k Ad d New Folder bu tton, and you will see the screen as shown in F igu ...

  • TP-Link TX-VG1530 - page 87

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.10 Route Set tings Choose “ Rou t e Set ting s ”, it includes three m enus : Default G ateway , S tatic Rou te and R IP Set tings . The detai led descr iptions are pr ovided be low. 4.10.1 Default Gateway Choose “ Rout e Set ting s ”  “ Default Gateway ”, you can see the Def ...

  • TP-Link TX-VG1530 - page 88

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 78 2. Enter the fol lowing data:  Destinati on IP A ddress : The Destination IP A ddress is the a ddress of the netw ork or host that y ou want to assign to a st atic route.  Subnet Mask : The Subne t M as k deter m ines wh ich portio n of an IP Addr ess is the networ k porti ...

  • TP-Link TX-VG1530 - page 89

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  No te: RIP cannot be c onfigured on the W AN Int erface wh ich has NAT enab led (such as PPPoE). 4.11 IPv6 Route Settings Choose “ IPV6 Rou t e Set tings ” , it in clud es t hree menus : IP v6 Default Gatewa y , IP v6 S tatic Rou te . The detailed des criptions are prov ided bel ow. ...

  • TP-Link TX-VG1530 - page 90

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 1. Click the Ad d New button in Fi gure 4- 81 , and you w ill see the screen as shown in Fig ure 4- 82 . Figure 4- 82 2. Enter the fol lowing data:  Destinati on IP A ddress : The Destination IP A ddress is the addr ess of the networ k or host that y ou want to assign to a st atic route. ...

  • TP-Link TX-VG1530 - page 91

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.12.1 Virtual S erv er s Choose menu “ For warding ” → “ Virtual Servers ”, and t hen you c an view a nd add virt ual serv ers in the next scree n (show n in Figure 4- 83 ). Virtual servers can be used for sett ing up public services on your L AN. A v irtual server is defined as a ...

  • TP-Link TX-VG1530 - page 92

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 84  Not e: It is possi ble that y ou have a co mputer or ser ver th at has more tha n one ty pe of av ai lable s ervice. If so , select another s ervic e, and ty pe the same IP address for that co mputer o r server . To modi fy or delet e an exi sting e ntry: 1. Find the des ire ...

  • TP-Link TX-VG1530 - page 93

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 1. Clic k the A dd New button , the next sc reen will pop - up as show n in Figur e 4- 86 . 2. Select a co mmon applic ation f ro m the Comm on Service Port drop - dow n li st, then t he Trigger Port field and the Open Ports field w ill be automatical ly filled. I f the Com mon Service Port ...

  • TP-Link TX-VG1530 - page 94

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 2. Clic k Edit as desire d on the Edit column. Clic k the Enable / Disa bled Selecte d b utton to make selected entries en abled / disabled . Clic k the Del ete Sel ected button to delete s elected entr ies . Once the GPO N router is confi gured, the o perati on is as follo w s: 1. A local h ...

  • TP-Link TX-VG1530 - page 95

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.12.4 UPnP Choose menu “ For warding → UPnP ” , and then you can view the inf ormatio n about UP nP in the screen (sh own in Figure 4- 88 ). The Universal Plug and Play (UPnP) feature allows the dev i ces, such as Intern et comput ers, to access the loca l host resour ces or devices a ...

  • TP-Link TX-VG1530 - page 96

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 89  Enab le Parenta l Contr ol : Ch eck the box if you wa nt this f unction to t ake e ffect . Thi s fu ncti on is disabled by default.  MAC A ddress of Parent al PC : In this field, enter the M AC address o f the contr olling PC, or you can ma ke use of the Co py To Abov e b ...

  • TP-Link TX-VG1530 - page 97

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.14 Firew all There are f ou r submenus under the Fir ewa ll m enu: Ru le , L AN Host , W AN H ost and Schedu le . Click any of them, and yo u will be able to configur e the corresp onding fu nction. 4.14.1 Rule Ch oose menu “ Firewall ” → “ Rule ” , and then y ou can v iew and s ...

  • TP-Link TX-VG1530 - page 98

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide T he met hods t o add a n ew rule : 1. C lick the A dd New button and the next scre en will pop up as shown i n Figure 4- 91 . 2. Give a name (e.g. Rule _1) for t he rule in the Descri ption fiel d. 3. S elect a host fr om the L AN Ho st dr op - down list or c hoose “ A dd L AN Host ”. 4 ...

  • TP-Link TX-VG1530 - page 99

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide T o add a ne w entry, please follo w the steps b elow. 1. C lick the A dd New button. 2. In the M ode field, se l ect IP Ad dress or M AC Addre ss.  I f you select IP Addr ess, please follow the steps b elow : 1) In Descript ion field, creat e a unique d escriptio n for the host (e.g. Hos ...

  • TP-Link TX-VG1530 - page 100

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 2) In IP A dd ress field, enter the I P address. I f you select M AC A ddress , the screen sh own is Fig ure 4- 95 . Figure 4- 95 1) In Descrip tion field, creat e a unique d escriptio n for the host (e.g. Host_ 1). 2) In M AC Address f ield, ent er the MAC addres s. I f you select URL Addre ...

  • TP-Link TX-VG1530 - page 101

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Ed it : Here y ou can modif y an existing sche dule. T o add a ne w schedule, follow the st eps bel ow : 1. Clic k A dd N ew but ton an d the next screen will po p - up as show n in Figure 4- 98 . 2. In Descrip tion field, creat e a unique d escriptio n for the sche dule (e.g. Schedule_1 ...

  • TP-Link TX-VG1530 - page 102

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.15.1 IPv6 Rule C hoose men u “ IP v6 Firewa ll ” → “ IP v6 R ule ” , and then you can v iew and set Access C ontro l rules in the scre en as shown in Figure 4- 99 . Figure 4- 99  Enable IPv6 Firewall: Select the ch eck box t o enable the IPv6 Firewa ll function, so the Defau l ...

  • TP-Link TX-VG1530 - page 103

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 3. Sel ec t a host fro m the IPv6 L AN Host drop - down lis t or choose “ A dd IP v6 L AN Hos t ”. 4. Select a target from the IPv6 W AN Host drop - sown list or ch oose “ A dd IP v6 W AN Host ”. 5. Select a sch edule fro m the IPv6 Schedule drop - d own list or choose “ A dd IPv6 ...

  • TP-Link TX-VG1530 - page 104

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4. Enter the pre fix length o f the IPv6 addr ess in the Prefix Length field. 5. Click the Save button to save the settings . Click the Delet e Sele cted button to delete s elected entries. 4.15.3 IPv6 W AN Host C hoose menu “ IPv6 Fi rewal l ” → “ I P v 6 W AN Ho st ” , and then y ...

  • TP-Link TX-VG1530 - page 105

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 105  De scription : Here display s the description o f the schedu le and this descr iption is uni que .  Ed it : Here you ca n m odi f y an exist i ng sche dule. T o add a ne w schedule, follow the st eps bel ow : 1. Click A dd New button and you w ill see the scree n as show ...

  • TP-Link TX-VG1530 - page 106

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide IPv6 complet ely suppl ants IPv 4 . It is a temporary solution for networ k s that do not support nativ e dual - stac k, where bot h IPv 6 and IPv4 r un independ ently. Choose menu “ IP v6 Tunne l ” , and you will see t he screen as s hown in Figur e 4- 107 . Figure 4- 107  Ena ble: C ...

  • TP-Link TX-VG1530 - page 107

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 109  W AN C on nect ion: Select a W AN conn ection from the drop - down list. O nly the con nected WAN connect ions can be shown in t he drop - down list.  Confi gurat ion Ty pe: Select a configurat ion type for t his tunnel . Aut o means t o obtain the followin g paramet ers ...

  • TP-Link TX-VG1530 - page 108

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.17 Quality of Serv ice QoS (Qualit y of Service) hel ps to prioritiz e data as it enter s your rout er. By attaching spe cial identific ation mar k s or headers to inc oming packets, QoS deter mines which queue the pac k ets enter, based priority . This is useful when there ar e certain ty ...

  • TP-Link TX-VG1530 - page 109

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide • SP - Mode: Strict - Priority Mode. In t his mode, the queue w ith higher prior ity will occupy the whole bandw idth. Packet s in the queue with low er priority ar e sent only when the queue with h i gher pr iority is e mpty. The disadvant age o f SP queue i s that: i f there ar e packets ...

  • TP-Link TX-VG1530 - page 110

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 112 Que ue: Cl ick Add Ne w button shown in queue part in Figure 4- 112 , you can add a new queue in Figure 4- 113 . Figure 4- 113  Di rec tion: Select th e dir ecti on .  Schedul er A lgorithm: Display s the S cheduler A l gorith m you have chose n i n Fig ure 4- 111  Que ...

  • TP-Link TX-VG1530 - page 111

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Not e: 1) Onl y enable the QoS functi on of the relevant direction , t he queue configurati on in SP or W RR mod e could t ake ef fe ct. 2) At most y ou could estab lish 8 upstrea m queues an d 8 upstrea m queues. Click the Save button to sav e your set tings . Clic k Back to go bac k to ...

  • TP-Link TX-VG1530 - page 112

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Mark Differenti ated Ser vice Code Poi nt (DSCP) : Enter the number to remar k the DSC P priority . To make this funct ion take e ffect, make sur e you have e nabled DSCP m ark i n Fi gure 4- 11 1.  Mark 802. 1P Priority: Select the type to r emark t he 802.1p priority . To make thi s ...

  • TP-Link TX-VG1530 - page 113

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.17.3 Bandw idth Control Choose menu “ Quality of Se rvice ” → “ Band width C ontrol ” , and then y ou can view and configure t he Bandw idth Contro l rules in the s creen below. Figure 4- 116  Descrip tion : This is t he infor mation about the rules such as ad dress ra nge . ? ...

  • TP-Link TX-VG1530 - page 114

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.18 IP&M AC Binding There are two s ubmenus under the IP &MAC Bin ding menu: Binding Sett ing s and AR P L i s t . Click any of them, and you will be ab le to scan or config ure the corresp onding function. The detailed exp l anatio ns for each sub m enu are prov i ded bel ow. 4.18. ...

  • TP-Link TX-VG1530 - page 115

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 2. Enter the MAC Addr ess and IP Addr ess . 3. Select the B ind checkbox . 4. Click the Save button to sav e it. To modi fy or delet e an exi sting e ntry , fol low the steps belo w. 1. Find the des ired entry i n the table. 2. Clic k Edit as d esired on t he Ed it column. Click the Enable / ...

  • TP-Link TX-VG1530 - page 116

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 121  Service Prov ider: T hi s field display s the s ervice pr ovider of D DNS.  Doma in Na me: E nter the D omain n ame you rece ived from dy namic DN S servi ce provider.  Usernam e & Password: Ty pe the “ Use r Name” and “ Passw ord” for your DD NS account . ...

  • TP-Link TX-VG1530 - page 117

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.21 S y stem T ools Choose men u “ System Tools ” , and you ca n see the submen us under th e mai n menu: System Log , Time Settings , M anag e Control , C WMP Settin gs , SNMP Settings , Backup & Restore , Factory Defaults , Firmware Upgra de , Re boot and Sta tistics. C lick any o ...

  • TP-Link TX-VG1530 - page 118

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Figure 4- 124  Save Locall y : If Save Locally is selected , events w ill be recorded i n the loc al memory .  Minimum Level: Select t he Minimum level in the drop - dow n list, for the Minimum Level, all logged event s abov e or equal to the sele cted lev el will be disp layed.  Sa ...

  • TP-Link TX-VG1530 - page 119

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 2. Enter the Date in Year/M onth / Day format. 3. Enter the Time in Hour /Minute/ Second for mat. 4. Clic k Save . To set time automatically: 1. Select y our local time z one. 2. Enter the ad dress or dom ain of the NTP Server 1 or NTP Se rver 2 . 3. Cli ck the Ge t GM T button t o get syste ...

  • TP-Link TX-VG1530 - page 120

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4.21.4 CWMP S ettings Choose “ Sy stem Tools ” → “ CWM P Setting s ”, you can configure t he C WMP function in th e screen. The GPON router offers CWMP featur e. The funct ion supports T R - 069 prot ocol which colle cts informati on, diagnos es the dev ices and con figures t he de ...

  • TP-Link TX-VG1530 - page 121

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide SNM P ( Simple N etwor k Management Prot oco l) has been widely applied in the computer netw orks currently , which is use d for ensur ing the tran smiss ion of the ma nagement i nformatio n betwee n any tw o nodes. In this w ay, network admini strator s can easily search a nd modify the inf ...

  • TP-Link TX-VG1530 - page 122

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide restart aut omat ically then. Keep the power o f the G P ON rout er on during the process, in cas e of any damage. 4.21.7 Factory Defaults Choose menu “ Sy stem Tools → Factory D e faults ” , and then and you can restore th e configurat ions of the GPO N router t o factory def aults on ...

  • TP-Link TX-VG1530 - page 123

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  Hardware V ersion : D isplays t he current hardw are v ersion. The har dware version of the upgrade fil e must acc ord with t he GPON route r ’s cur rent hardwar e versio n. To upgr ade t he GPO N route r 's f irmware, follo w these instruct ions below : 1. Download a m ost recent ...

  • TP-Link TX-VG1530 - page 124

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide • U pdate the con figuration with t he file (syste m will reboot aut omat ically. 4.21.10 Stati stics Choose menu “ Sy stem Tools ” → “ Statistics ”, and then you can v iew the statistic s of the GPON router , incl uding tota l traffic and current traffi c of the last P ackets S ...

  • TP-Link TX-VG1530 - page 125

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide IP /M AC Address The IP and M AC a ddress are displayed wit h relat ed statistic s . Total Packets The total number of packets r eceived and transmitted by the G PON router . B yt e s The total number of bytes rec eived and transmitted by the GPON router . Current Packets The total nu mber o ...

  • TP-Link TX-VG1530 - page 126

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Appendix A: Specifications General Standards an d P rotocol s ITU 9 84.1 , ITU 984.2 , ITU 984.3 , IT U 984.4 , IEEE802.1p, I EEE 802.11b, IEEE802. 11e, IEEE 802.11 g, IEEE 802.1 1n, IEEE 802.3, IEEE 80 2.3u, TCP/IP , PPPoE, SNTP, H TTP, DHCP, IC MP, NAT Saf et y & Em i ssio n FCC, ...

  • TP-Link TX-VG1530 - page 127

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Appendix B: T roubleshooting T1. How do I re store m y GPON router ’s co nfiguration to its factor y defaul t settin gs? With the G PON rout er powered on, press and hold the R ESET button on the front panel for at least 6 second s before releasi ng it.  Note : Once the GPON router is r ...

  • TP-Link TX-VG1530 - page 128

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide  S el ec t Obtai n an IP addr ess automati cally and Obta in DNS serv er addres s au tomati cally . Th en cl ick OK . For Window s 8  Move your mouse to the lower right corner and y ou will see Search ico n in the Popups . Go to “ -> A pps ” . T ype Control P anel in the searc h ...

  • TP-Link TX-VG1530 - page 129

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide 4) Now, try to log on to the Web - bas ed configur ation page again a fter the abov e settings hav e been con figured. If y ou still cannot acc ess the con figurat ion page, p lease resto re your GPON router ’s factory def ault sett ings and reco nfigure y our GPON rou ter follow ing the i ...

  • TP-Link TX-VG1530 - page 130

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Appendix C: T elephon y Features T his section i ntroduc es what the followin g features are used for. Call Hold ing This featur e allows y ou to put a cal l on hold, in w hich case the cal l is not ended but n o verbal communic ation is av ailable. To put a call on hold, pr ess the FLA SH b ...

  • TP-Link TX-VG1530 - page 131

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Anony mous Call Blocki ng With this fe ature enabl ed, all anony m ous calls wi ll be bloc ked. Speed Dial T his feature allows you to create short nu mbers f or your freq uently used tele phone nu m bers to make your dialing more co nvenient. You just need to press one or tw o digits and th ...

  • TP-Link TX-VG1530 - page 132

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Appendix D: T elephone Operation Th e table below guid es you t o configure some frequ ently used call features us ing keypad s on your telephon e. F or the featur es mentioned in this table, ple ase refer to Telephony Features in Appendi x C . Cod e Descrip tion Us age *20 Listen to voice m ...

  • TP-Link TX-VG1530 - page 133

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide *71 En able Cal l Fo rwa rdi ng on No Answer. Pick up the pho ne to dial this code. After he aring the confirmat ion tone, han g up to make the con figuration t ake effec t. *72 En able Cal l Fo rwa rdi ng on B us y. Pick up the phone t o dial this code. After hear ing the confirmat ion tone ...

  • TP-Link TX-VG1530 - page 134

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide *84 Disable Anony mous Call in g. Pick up the pho ne to dial this code. After he aring the confirmat ion tone, han g up to make the con figuration t ake effec t. *86 Enable D ND (Do Not Disturb). Pick up the pho ne to dial this code. After he aring the confirmat ion tone, han g up to make th ...

  • TP-Link TX-VG1530 - page 135

    TX- VG 15 30 N 300 Wirel ess Vo IP GPON Router User Guide Appendix E: T echnical Support Technical Support  For more troubles hooting hel p, go to: http://www.tp - link.com/en/s upport/faq  T o down load the late st Firmware, Driver , Utility and User G uide, go to: http://www.tp - link.com/en/s upport/dow nload  For all other technic al s ...

メーカー TP-Link カテゴリー Router

TP-Link TX-VG1530のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- TX-VG1530の取扱説明書
- TP-Linkの製品カード
- パンフレット
- またはTP-Link TX-VG1530の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、TP-Link TX-VG1530の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、TP-Link TX-VG1530の取り付け説明書、サービスマニュアル、簡易説明書、またはTP-Link TX-VG1530のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、TP-Link TX-VG1530の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

TP-Link TX-VG1530デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがTP-Link TX-VG1530を使用するのを助ける技術的文書のことです。説明書は通常、全てのTP-Link TX-VG1530ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

TP-Linkの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. TP-Link TX-VG1530の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははTP-Link TX-VG1530の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。TP-Link TX-VG1530に関してこのドキュメントで見つけることができる全てのヒントの目次
3. TP-Link TX-VG1530デバイスの基本機能を使うにあたってのヒント。 TP-Link TX-VG1530のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。TP-Link TX-VG1530に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるTP-Link TX-VG1530のメーカー/サービスへの連絡先に関する情報。

TP-Link TX-VG1530についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもTP-Link TX-VG1530の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがTP-Link TX-VG1530で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)