Toshiba 4200FAの取扱説明書

10ページ 0.04 mb
ダウンロード

ページに移動 of 10

Summary
  • Toshiba 4200FA - page 1

    4200 FA 50kVA XT September 6, 2004 1 TOSHIBA International Corp GUIDE SPECIFICATIONS THREE PHASE UNINTERRUPTIBLE POWER SYSTEM TOSHIBA 4200 FA 50 kVA XT – Transformer / External Battery 480v Input / 480/277v Output UPS GUIDE SPECIFICATIONS ...

  • Toshiba 4200FA - page 2

    4200 FA 50kVA XT September 6, 2004 2 (50 kVA XT) 1.0 SCOPE 1.1 System This specification describes a conti nuous duty, three-phase, on-line, solid- state uninterruptible power supply system, hereafter referred to as the UPS. 2.0 SYSTEM DESCRIPTION 2.1 Applicable Standards The UPS shall be designed in accor dance with and be compliant with the follo ...

  • Toshiba 4200FA - page 3

    4200 FA 50kVA XT September 6, 2004 3 H. Input / Output EMI / RFI Filters 2.3 System Operation The UPS shall operate as an on-line, fully automatic system in the following modes: A. NORMAL - Incoming AC power is boosted using a chopper circuit, and converted into DC power. The DC power is then used to charge the battery bank while at the same time p ...

  • Toshiba 4200FA - page 4

    4200 FA 50kVA XT September 6, 2004 4 protection against spikes, common/normal mode noise, load steps and frequency shifts (without battery back-up capability). 3.0 SYSTEM PARAMETERS A. UPS Input 1) Input Voltage 480VAC 2) Input Voltage Requirement 3 Phase, 3 Wire + Ground 3) Voltage Variation +10% to -30% 4) Rated Frequency 50/60 Hz 5) Frequency Ra ...

  • Toshiba 4200FA - page 5

    4200 FA 50kVA XT September 6, 2004 5 +/- 3% (loss or return of input power) +/- 8% (bypass to inverter) 13) Transient Voltage Recovery 50ms maximum to within 2% of nominal 14) Overload Cap. (on inverter) 125% for 90 sec., 150% for 30 sec. 15) Overload Cap. (on bypass) 1000% for 10ms, 125% for 10 min. 16) Crest Factor 3.0 17) Harmonic Voltage Distor ...

  • Toshiba 4200FA - page 6

    4200 FA 50kVA XT September 6, 2004 6 4.0 FUNCTIONAL DESCRIPTION A. Converter / Charger / DC Chopper DESCRIPTION - The converter/charger s hall consist of a solid-state three phase rectifier, DC to DC converter (chopper), output filter, and transient suppresser network to regulate and maintain DC power to the inverter. 1) TRANSIENT SUPPRESSER - The ...

  • Toshiba 4200FA - page 7

    4200 FA 50kVA XT September 6, 2004 7 2) INPUT ISOLATION TRANSFORMER - The inverter network shall incorporate a shielded isolation transfo rmer to provide complete isolation of the load from utility AC, as well as providing attenuation for high frequency noise common mode). Additi onally, the transformer shall have a set of windings to condition the ...

  • Toshiba 4200FA - page 8

    4200 FA 50kVA XT September 6, 2004 8 See “System Diagnostics” for specific fault. 3) SYSTEM METERING - The UPS s hall be provided with a single read- out display which displays, upon request, the following information: AC INPUT VOLTAGE (Line to Line) AC OUTPUT VOLTAGE (Line to Line, Line to Neutral) AC OUTPUT CURRENT BATTERY VOLTAGE BATTERY CHA ...

  • Toshiba 4200FA - page 9

    4200 FA 50kVA XT September 6, 2004 9 B. Matching Battery Enclosure The battery cabinet shall consist of a freestanding, matching NEMA1 enclosure equipped with casters and leve ling feet. The maximum overall dimensions and weights shall be as follows: UPS Size Dimensions Weight Runtimes 50 kVA 30”L x 32”W x 59.8”H ~1,832 lbs. 4-29 Min C. Cable ...

  • Toshiba 4200FA - page 10

    4200 FA 50kVA XT September 6, 2004 10 D. Battery Test Function The UPS shall be provided with a “Battery Test” pushbutton to periodically check the condition of the batteries. Upon detection of a battery problem, the UPS shall notify the us er of this condition allowing the user to perform a detailed check of the battery string. 7.0 SERVICE AND ...

メーカー Toshiba カテゴリー Marine Radio

Toshiba 4200FAのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 4200FAの取扱説明書
- Toshibaの製品カード
- パンフレット
- またはToshiba 4200FAの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Toshiba 4200FAの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Toshiba 4200FAの取り付け説明書、サービスマニュアル、簡易説明書、またはToshiba 4200FAのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Toshiba 4200FAの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Toshiba 4200FAデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがToshiba 4200FAを使用するのを助ける技術的文書のことです。説明書は通常、全てのToshiba 4200FAユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Toshibaの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Toshiba 4200FAの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははToshiba 4200FAの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Toshiba 4200FAに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Toshiba 4200FAデバイスの基本機能を使うにあたってのヒント。 Toshiba 4200FAのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Toshiba 4200FAに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるToshiba 4200FAのメーカー/サービスへの連絡先に関する情報。

Toshiba 4200FAについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもToshiba 4200FAの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがToshiba 4200FAで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (1)

Angel Moreno

No puedo ponerla en Bypass. No me carga baterias