Russell Corporation 211014の取扱説明書

30ページ 1.49 mb
ダウンロード

ページに移動 of 30

Summary
  • Russell Corporation 211014 - page 1

    1 03/05 P/N 211014 Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-632 7921 Internet Address: http://www.huffysports.com REQUIRED TOOLS AND MA TERIALS: AND/OR OPTIONAL TOOLS AND MA TERIALS: Universal Elevator Mount Owners Manual Custo ...

  • Russell Corporation 211014 - page 2

    2 P/N 211014 03/05 201246 1 1/04 In the U.S.:1-800-558-5234 and Canada: 1-800-284-8339 F AILURE T O FOLLOW THESE W ARNINGS MA Y RESUL T IN SERIOUS INJUR Y AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. W ARNING • DO NOT HANG on the rim or any part of the system including ba ...

  • Russell Corporation 211014 - page 3

    3 03/05 P/N 211014 IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are p acked inside. NOTICE T O ASSEMBLERS ALL Huffy Sport s basketball systems, including those used for DISPLA YS, MUST be assembled and ballasted with sand or water according to instructions. Failure to follow ins ...

  • Russell Corporation 211014 - page 4

    4 P/N 211014 03/05 Get to know the basic parts of your basketball system... FRONT VIEW TOP POLE BACK VIEW MIDDLE POLE FRONT COVER RIM BOTTOM POLE STRUTS ELEV A TOR ASSEMBL Y BACKBOARD BASE WHEEL CARRIAGE ASSEMBL Y ...

  • Russell Corporation 211014 - page 5

    5 03/05 P/N 211014 P AR TS LIST (SEE P ARTS IDENTIFIER) Item Qty Part No Description P-1 1 908164 Top Pole Section P-2 1 908107 Middle Pole Section (with Label) P-3 1 908165 Bottom Pole Section P-4 2 900223 Wheel Bracket P-5 2 206940 Axle, 21" Long P-6 2 226403 Wheel 6” P-7 1 206990 Bracket, Reinforcement P-8 1 200117 Base P-9 1 108163 Brack ...

  • Russell Corporation 211014 - page 6

    6 P/N 211014 03/05 P AR TS IDENTIFIER P-31 (1) P-30 (1) P-18 (1) P-26 (1) P-28 (2) P-32 (1) P-22 (1) P-23 (1) P-29 (1) P-24 (1) P-25 (1) P-21 (2) P-19 (2) P-20 (2) P-14 (1) P-15 (1) P-16 (2) P-17 (2) 204532 11/04 MOVING SYSTEM 1. Adjust basketball backboard height to lowest position. 2. Rotate handle forward until wheels engage ground. 3. Move bask ...

  • Russell Corporation 211014 - page 7

    7 03/05 P/N 211014 HARDW ARE LIST (SEE HARDW ARE IDENTIFIER) Item Qty Part No Description H-1 4 206938 Pushnut, Black H-2 1 203223 Bolt, Carriage, 5/16-18 x 1" Long H-3 1 202662 Bolt, Hex, 5/16-18 x 4.5" Long H-4 7 203218 Washer 5/16 H-5 1 200188 Rod 3/8 x 5.25 H-6 1 202822 Eye Bolt, 3/8-16 x 3.75 H-7 1 200516 Bolt Cover H-8 1 200512 Bolt ...

  • Russell Corporation 211014 - page 8

    8 P/N 211014 03/05 Item H-6 (1) Item H-8 (1) Item H-12 (1) Item H-18 (8) Item H-19 (1) Item H-31 (1) Item H-25 (2) Item H-21 (2) Item #H-29 (4) Item H-3 (1) Item #H-10 (1) Item H-16 (2) Item H-27 (4) Item H-13 (4) Item H-2 (1) Item #H-30 (1) HARDW ARE IDENTIFIER (BOL TS & SCREWS) ...

  • Russell Corporation 211014 - page 9

    9 03/05 P/N 211014 Item H-20 (4) Item H-23 (2) Item H-26 (6) Item H-4 (7) Item H-15 (8) HARDW ARE IDENTIFIER (NUTS, W ASHERS & MET AL SP ACERS) HARDW ARE IDENTIFIER (PLASTIC SP ACERS & CAPS) Item H-14 (2) Item H-9 (4) Item H-33 (1) Item H-1 1 (17)* Item H-1 (4) Item H-17 (4) Item H-22 (1) Item H-7 (1) Item H-28 (12) Item H-32 (1) Item H-5 ( ...

  • Russell Corporation 211014 - page 10

    10 P/N 211014 03/05 SECTION A: ASSEMBLE THE POLES Wood Scrap P-2 P-1 5" (13 cm) 5" (13 cm) P-1 P-3 P-2 Pole Identification Sticker Pole Identification Sticker 2. While maintaining alignment, bounce middle pole section (P-2) into top section (P-1) using a wood scrap as shown until the top pole no longer moves toward the pole identification ...

  • Russell Corporation 211014 - page 11

    11 03/05 P/N 211014 While maintaining alignment, bounce assembly and lower section (P-3) together as shown until they no longer move toward taped reference mark. P-1 P-2 P-3 3. WOOD SCRAP (NOT SUPPLIED) TROUGH Align dimple of middle pole section (P-2) into trough of bottom pole section (P-3) as shown. IMPORT ANT! POLE SECTIONS SHOULD HAVE A 3-1/2&q ...

  • Russell Corporation 211014 - page 12

    12 P/N 211014 03/05 SECTION B: ASSEMBLE THE BASE This is what your system will look like when you’ve finished this section. 1. Insert axle (P-5) through wheel bracket (P-4). Secure wheels (P-28) to axle using pushnuts (H-1). Carefully tap pushnut s (H-1) onto axle with hammer or mallet. P-4 P-28 P-28 H-1 H-1 P-5 TO INSTALL SECOND PUSHNUT: • Ass ...

  • Russell Corporation 211014 - page 13

    13 03/05 P/N 211014 3. Install rod (H-5) through holes in bottom pole section (P-3) and eyebolt (H-6). 2. Install wheel assembly to base (P-8) using bolt (H-2), and nut (H-1 1) as shown. Finger-tighten only . H-6 H-5 P-1 P-3 P-2 H-2 H-1 1 H-2 P-8 ...

  • Russell Corporation 211014 - page 14

    14 P/N 211014 03/05 H-26 H-5 H-6 P-8 H-4 P-26 TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. W ARNING! Insert pole assembly into tank (P-8) and through center hole on wheel assembly as shown. Secure pole assembly with anchor strap (P-26), washer (H-4), and lock nut (H-26 ...

  • Russell Corporation 211014 - page 15

    15 03/05 P/N 211014 5. P-13 P-13 Secure tank strut s (P-13) to pole using bolt (H-3), washers (H-4) and nut (H-23) as shown. Place bolt cover (H-7) over exposed end of bolt as shown. Rotate non-secured ends of t ank struts (P-13) outward to mounting holes in tank as shown. TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD ...

  • Russell Corporation 211014 - page 16

    16 P/N 211014 03/05 6. 7. Secure ends of tank strut s (P-13) to tank using bolt (H-21), washers (H-4) and nut (H-1 1) as shown. Repeat for opposite side. Install upper pivot bracket (P-14) to front of base using bolt (H-8), washer (H-9) and nut (H-26) as shown. H-21 H-4 H-1 1 H-4 P-13 H-26 H-9 P-14 H-8 TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILUR ...

  • Russell Corporation 211014 - page 17

    17 03/05 P/N 211014 H-1 P-6 P-5 P-4 P-6 H-1 10. SIDE OF WHEEL WITH LONGER PLASTIC AXLE NEEDS TO FACE THE WHEEL BRACKET. IMPORT ANT! Insert axle (P-5) through wheel bracket (P-4). Secure wheels (P-6) to axle using pushnuts (H-1). Carefully tap pushnut s onto axle with hammer or mallet. Secure both hinge tubes (P-16) to second wheel bracket (P-4) wit ...

  • Russell Corporation 211014 - page 18

    18 P/N 211014 03/05 Position base as shown. Secure wheel bracket assembly with disc (P-23), washer (H-9) and nut (H-26) as shown. H-10 P-23 H-9 H-26 Carefully reposition entire assembly as shown: 11 . TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. W ARNING! IMPORT ANT! D ...

  • Russell Corporation 211014 - page 19

    19 03/05 P/N 211014 SECTION C: ASSEMBLE THE ELEV A TOR SYSTEM & BACKBOARD This is what your system will look like when you’ve finished this section. Securely rest the assembly on sawhorse. Identify elevator tubes (P-19 and P-20). P-19 Lower Elevator T ube T oward Board T oward Pole P-20 Upper Elevator T ube P-20 P-19 ...

  • Russell Corporation 211014 - page 20

    20 P/N 211014 03/05 P-1 P-18 P-20 H-15 H-15 P-19 H-17 P-20 P-19 P-17 H-18 H-19 H-18 1. While the system is securely resting on the sawhorse. Install triangle plates (P-17) and elevator tubes (P-19 and P-20) to top pole section (P-1) as shown. Inst all pole cap (P-18) at this time. P-17 COMPLETED ASSEMBL Y H-17 H-17 TWO PEOPLE REQUIRED FOR THIS PROC ...

  • Russell Corporation 211014 - page 21

    21 03/05 P/N 211014 2. 3. Remove packaging materials from handle assemblies (P-10 and P-1 1). Remove screws on both sides of tube. P-1 1 P-10 P-1 1 Slide upper tube (P1 1) onto handle assembly (P-10). Reinsert screws removed in previous step as shown. P-21 H-24 H-24 H-25 H-25 H-26 H-26 Assemble brackets (P-21) to backboard using bolt s (H-25) metal ...

  • Russell Corporation 211014 - page 22

    22 P/N 211014 03/05 Insert spacer (H-22) through springs (P-12) then assemble lower elevator tubes (P-19), and springs (P-12), to brackets (P-21) using bolts (H-18), plastic sp acers (H-20), metal spacer (H-22) and nut s (H-15) as shown. 5. P-21 H-20 H-15 H-20 H-22 P-12 H-22 P-12 6. P-19 H-31 P-30 H-29 H-1 1 IMPORT ANT! Position springs (P-12) agai ...

  • Russell Corporation 211014 - page 23

    23 03/05 P/N 211014 7. P-31 H-33 H-32 P-30 H-31 Inst all Slam Jam Rim to Backboard P-29 P-32 H-31 H-32 H-33 A B C D E A. Fit rim (P-29) securely into bracket (P-30) as shown. Allow T -bolt (H-31) to slip through center hole in rim (P-29). B. Install reinforcement bracket (P-31) onto T -bolt (H-31) as shown. C. Install spring (P-32) onto T -bolt (H- ...

  • Russell Corporation 211014 - page 24

    24 P/N 211014 03/05 P-20 P-20 H-18 H-20 P-21 H-15 H-20 Assemble upper elevator tubes (P-20) to brackets using bolt (H-18), plastic sp acers (H-20), and nut (H-15) as shown. 8. P-19 P-19 TIGHTEN BOLT (H-18) IN LOCK NUT (H-15) UNTIL FLUSH (EVEN) WITH LOCK NUT’S OUTER EDGE. W ARNING! ...

  • Russell Corporation 211014 - page 25

    25 03/05 P/N 211014 H-18 H-15 P-1 P-20 P-19 P-17 P-1 1 9. Install handle assembly (P-10 and P-1 1) to lower elevator tubes (P-19) using bolt (H-18), spacers (H-14), and nut (H-15) as shown. P-20 P-19 H-14 H-14 Secure the handle assembly (P-10 & P-1 1) to pole bracket (P-9) using bolt (H-30) and nut (H-23) as shown. 10. P-9 P-7 H-30 H-23 P-10 IM ...

  • Russell Corporation 211014 - page 26

    26 P/N 211014 03/05 P-20 P-12 H-15 P-20 11 . Insert bolt (H-18) through left side upper elevator tube (P-20), then stretch spring (P-12) onto bolt (H-18). Continue inserting bolt (H-18) through right side upper elevator tube (P-20) and secure with nut (H-15). H-18 P-12 USE EYE PROTECTION WHEN INST ALLING SPRINGS. W ARNING! IMPORT ANT! Position spri ...

  • Russell Corporation 211014 - page 27

    27 03/05 P/N 211014 12. Install net clip s (H-28). CLIP “ARM” CLIP “BODY” Insert one “arm” of clip into ram as shown. T wist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. Push in direction indicated by arrows. Push second “arm” back and into ram as shown. T wist “body” ...

  • Russell Corporation 211014 - page 28

    28 P/N 211014 03/05 Insert net into bottom of clip as shown. SIDE VIEW T wist net until it snap s into position. Net must be centered through clip. NET NET CLIP SIDE VIEW NET NET CLIP 13. H-28 P-33 Install net (P-33). P-33 ...

  • Russell Corporation 211014 - page 29

    29 03/05 P/N 211014 SECTION D: INST ALL FRONT COVER & HANDLE 1. Attach front cover (P-22) to hinge tubes (P-16) using carriage bolt s (H-27) and flange nuts (H-1 1) as shown. P-22 H-27 H-1 1 P-16 Upright system and fill base (P-8) with water (approximately 40 gallons) and snap fill cap (P-24) in place. P-24 2. DO NOT LEAVE ASSEMBLY UNATTENDED W ...

  • Russell Corporation 211014 - page 30

    30 P/N 211014 03/05 1. Roll assembly to desired playing area. Secure assembly to ground using strap (P-26) and tie down stake (P-25). P-26 P-25 P-8 SECTION E: SECURING THE SYSTEM & APPL YING LABEL 2. Apply Height Adjustment and Moving Label (P-27) to front of pole, where it is clearly visible. Peel protective film from surface of acrylic backbo ...

メーカー Russell Corporation カテゴリー Fitness Equipment

Russell Corporation 211014のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 211014の取扱説明書
- Russell Corporationの製品カード
- パンフレット
- またはRussell Corporation 211014の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Russell Corporation 211014の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Russell Corporation 211014の取り付け説明書、サービスマニュアル、簡易説明書、またはRussell Corporation 211014のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Russell Corporation 211014の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Russell Corporation 211014デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがRussell Corporation 211014を使用するのを助ける技術的文書のことです。説明書は通常、全てのRussell Corporation 211014ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Russell Corporationの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Russell Corporation 211014の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははRussell Corporation 211014の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Russell Corporation 211014に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Russell Corporation 211014デバイスの基本機能を使うにあたってのヒント。 Russell Corporation 211014のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Russell Corporation 211014に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるRussell Corporation 211014のメーカー/サービスへの連絡先に関する情報。

Russell Corporation 211014についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもRussell Corporation 211014の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがRussell Corporation 211014で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)