ページに移動 of 56
Reference Manu al 00809-1600-4530, Rev AA March 2015 R o semount 5300 Series Commissioning and V alidation Pr ocedures f or R osemount Radar ...
...
iii Reference Manu al 00809-1600-4530, Rev AA Commissioning and Validation Procedure for Rose mount Radar March 2015 Commis sioning and V alidati on Procedure f or R o se mount R adar R o semount 5300 Series F ailure to follow safe inst allation guideli nes could result i n death or serious i njury. Only qualified personnel should in stall th e ...
iv Reference Manu al 00809-1600-4530, Rev AA Commissioning and Vali dation Procedure for Rosemount Radar March 2015 Commis sioning and V alidati on Procedure f or R o se mount R adar ...
v Reference Manu al 00809-1600-4530, Rev AA Contents March 2015 Contents 1 Section 1: Introduction 1.1 Manual overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
vi Reference Manu al 00809-1600-4530, Rev AA Contents March 2015 Contents 4.7.1 Other validation suggestions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 5 Section 5: Additional Options 5.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
1 Reference Manu al 00809-1600-4530, Rev AA Section 1: Introduction March 2015 Introduc tion Sec tion 1 Introduc tion 1.1 Manual ov er view This manual provides commissioning, verification, and va lidation inf ormation for the Ro se mount 5300 Se ries Rad ar T ransmitte rs. This manual is inte nded to be us ed with the Ros emoun t 5300 Series R e f ...
2 Reference Manu al 00809-1600-4530, Rev AA Section 1: Introduc tion March 2015 Introduction ...
3 Reference Manu al 00809-1600-4530, Rev AA Section 2: Installation & con figuration March 2015 Installa tion and Con figuration Sec tion 2 Installa tion and Con figura tion Comple te the Quick S tart Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag e 3 Comple te the ba sic con figurat ion . ...
4 Reference Manu al 00809-1600-4530, Rev AA Section 2: Installation & con figuration March 2015 Installation and Con figuration Probe t ype Hold Off /Upper Null Zone . This parameter should only be changed if there are disturbing objects close to the probe , e .g. nozzle disturbances. No valid mea sureme nts are possible abov e the Hold ...
5 Reference Manu al 00809-1600-4530, Rev AA Section 2: Installation & con figuration March 2015 Installa tion and Con figuration AI block (F OUNDA TION fieldbus). A minim um of f our paramete rs are required to configure the AI Block. Channe l - Corresponds t o the desired sensor me asure ment L_T YPE - Defines the rel ationship to ...
6 Reference Manu al 00809-1600-4530, Rev AA Section 2: Installation & con figuration March 2015 Installation and Con figuration 2.2.3 Ba sic c onfigura tion u sing a Fie ld Communica t or Figure 2-3. Field Communicator Menu T ree Corresponding to Device R evision 3 For more informa tion, see Sec tion 5.5 Basic con figuration using a Field Commu ...
7 Reference Manu al 00809-1600-4530, Rev AA Section 2: Installation & con figuration March 2015 Installa tion and Con figuration 2.2.4 Basic c on figuration u sing AM S ® Suite (HAR T) or De ltaV ™ The Ro semoun t 5300 Serie s can also be con figured u sing AMS Suit e or DeltaV . For more informa tion, see Sec tion 5.7 Basic Configuration Us ...
8 Reference Manu al 00809-1600-4530, Rev AA Section 2: Installation & con figuration March 2015 Installation and Con figuration 2.3.2 Other op tion al advanced c on figurations Other functions that may be required can be f ound in A ppendix C of the ref ere nce m anual. Some of these may only be needed in certai n conditions. This i ncludes set ...
9 Reference Manu al 00809-1600-4530, Rev AA Section 2: Installation & con figuration March 2015 Installa tion and Con figuration T o view the analog out put signal, selec t the T ools > Device Displa y op tion and s elect the Analog Out tab : Figure 2-5. Presentation o f Analog Ou tput Value in Rosemount Radar Master For more informa tion, s ...
10 Reference Manu al 00809-1600-4530, Rev AA Section 2: Installation & con figuration March 2015 Installation and Con figuration Also, or a lternati vely , ac tivate t he tr ansm itter’ s loop test f unc tio n. Ou tput 4 , 12, a nd 20 mA a nd ve rif y that the readings in the DCS match up. In R ose mount Rad ar Ma ster , select Setup > Out ...
11 Reference Manu al 00809-1600-4530, Rev AA Section 2: Installation & con figuration March 2015 Installa tion and Con figuration Figure 2-8. The Ec ho Curve Presents All Visible Echoes 2.5 Common problems and recommended actions 2.5.1 Double bounce T all, narrow , and/or rough nozzles m ay cre ate double bounces, which disturb the measure ment ...
12 Reference Manu al 00809-1600-4530, Rev AA Section 2: Installation & con figuration March 2015 Installation and Con figuration 2.5.2 S trong fix ed ec ho - be nt probe/probe c ontac ting no zzle A probe in con tact with metal crea tes a str ong echo and the mea sureme nt will lock onto the strong echo. Note Hea v y con tamina tion ma y also c ...
13 Reference Manu al 00809-1600-4530, Rev AA Section 2: Installation & con figuration March 2015 Installa tion and Con figuration Re ad diagno stics V e rif y that no e rror s or unatte nded warnings are presen t. Figure 2-10. The Diagnostics Window in R osemount Radar Master T o view Diagno stics in Ro semoun t Radar Ma ste r , select T ools & ...
14 Reference Manu al 00809-1600-4530, Rev AA Section 2: Installation & con figuration March 2015 Installation and Con figuration 2.6 Archive files Sav e echo curve and configuration backup file Permane ntly store the echo cur ve and c onfiguration backup f iles for future use , with re-occurri ng ve rification procedures. In Rose moun t Rad ar ...
15 Reference Manu al 00809-1600-4530, Rev AA Section 3: Verification and Validation of GW R without Fluid V e rification and V alidation of GWR without Fluid Sec tion 3 V erifica tion and V alida tion o f GWR without Fluid V e rifica tion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
16 Reference Manu al 00809-1600-4530, Rev AA Section 3: Verification and Validation of GW R without Fluid March 2015 V e rification and V alida tion of GWR without Fluid a. Re fe rence pulse amplitude and location with regard to the ze ro line (see Ta b l e 3 - 1 ) Re fe re nce pulse amplitude varies with the type of probe used and the siz e of ...
17 Reference Manu al 00809-1600-4530, Rev AA Section 3: Verification and Validation of GW R without Fluid V e rification and V alidation of GWR without Fluid b. General noise floor amplitude (see Figure 3-2 ) The noise fl oor should be relativ ely flat with low amplitude. This can var y with the size and shape of the chamber internal str uc ture. F ...
18 Reference Manu al 00809-1600-4530, Rev AA Section 3: Verification and Validation of GW R without Fluid March 2015 V e rification and V alida tion of GWR without Fluid c. End of probe peak (see Figu re 3- 3 ) The end of probe pe ak is aff ected by the probe t ype and the use of ce nte ring discs. A metal cen te ring disk will give a positiv e pe ...
19 Reference Manu al 00809-1600-4530, Rev AA Section 3: Verification and Validation of GW R without Fluid V e rification and V alidation of GWR without Fluid Figure 3-4. Sample V erification R eflector Peak 5. While the chambe r is emp ty, save backup fi le and echo plot. Use the arc hive function in Rose mount Ra dar Mast er . Select Setup > ...
20 Reference Manu al 00809-1600-4530, Rev AA Section 3: Verification and Validation of GW R without Fluid March 2015 V e rification and V alida tion of GWR without Fluid 3.2 V alidation of devic e T o valida te the function alit y of a devic e after it has been in se r vice , it is po ssible t o comp are the current reading s to baseline re adings. ...
21 Reference Manu al 00809-1600-4530, Rev AA Section 3: Verification and Validation of GW R without Fluid V e rification and V alidation of GWR without Fluid T able 3-2. Validation C hecks Descrip tion Initial reading Va l i d a t i o n reading Allowable T olerance Re fere nce pe ak amplitude Normal v aria tion is ±10% mo stly depe nds on the ambi ...
22 Reference Manu al 00809-1600-4530, Rev AA Section 3: Verification and Validation of GW R without Fluid March 2015 V e rification and V alida tion of GWR without Fluid Ta g # ________ ______________ Serial# __ ______________ ___________ Parameter Initial Va l u e Curr e nt valu e To l e r a n c e With in tolerance? (Y es or No) Date Te m p e ...
23 Reference Manu al 00809-1600-4530, Rev AA Section 4: Verification Procedure with Fluid March 2015 V e rification Procedure with Fluid Sec tion 4 V erifica tion Proc edure with Fluid V e rifica tion procedur e with active lev el me a sure men t . . . . . . . . . . . . . . . . . . . . . . . . . . . page 23 Common proble ms and reco mmended actions ...
24 Reference Manu al 00809-1600-4530, Rev AA Section 4: Verification Procedure with Fluid March 2015 V e rifi cation Pr ocedure wi th Fluid Ec ho cur ve verification at operating conditions At normal operating c onditions, download and re view the echo cur ve acc ording to the f ollowing step s : 1. Check refe renc e pulse amplitude and position . ...
25 Reference Manu al 00809-1600-4530, Rev AA Section 4: Verification Procedure with Fluid March 2015 V e rification Procedure with Fluid 4.2 Common problems and recommended actions Sur face pulse not detected Figure 4-3. Surface Threshold too High Sur face measurement is too high Figure 4-4. Surface Threshold too Lo w 3.0 5.0 A B The Surface Th res ...
26 Reference Manu al 00809-1600-4530, Rev AA Section 4: Verification Procedure with Fluid March 2015 V e rifi cation Pr ocedure wi th Fluid Rec ommended actions Any o f thes e opti ons ma y be us ed to block f alse echo es : Raise gene ral surface threshold to about 300 mV abo ve f alse ec ho, but not more than 50% of he ight of sur face pe ak. ...
27 Reference Manu al 00809-1600-4530, Rev AA Section 4: Verification Procedure with Fluid March 2015 V e rification Procedure with Fluid 4.3 T ransmitter diagnostics revie w V e rif y that no e rrors or unatte nded warnings ar e prese nt. Figure 4-6. The Diagno stics Window in RRM T o view Diagnostics in R RM, selec t T ools > Diagnosti cs . For ...
28 Reference Manu al 00809-1600-4530, Rev AA Section 4: Verification Procedure with Fluid March 2015 V e rifi cation Pr ocedure wi th Fluid Figure 4-7. Log R egisters Sta r t empt yi ng th e t an k o r c ham ber mak in g s ur e n ot t o s top unt il it is com pl etel y em pt y. Wi th a ch amber , do not f org et to c lose th e proces s valves be fo ...
29 Reference Manu al 00809-1600-4530, Rev AA Section 4: Verification Procedure with Fluid March 2015 V e rification Procedure with Fluid 4.5 Ec ho cur ve v erification with empt y tank Wh en th e t an k or cham ber is empt y , down lo ad and review the echo curve according to the fol low in g s teps: 1. Compare the echo c ur ve with previou s pl ot ...
30 Reference Manu al 00809-1600-4530, Rev AA Section 4: Verification Procedure with Fluid March 2015 V e rifi cation Pr ocedure wi th Fluid Figure 4-9. The Configuration Report Win dow in RRM 4.7.1 Other valid ati on suggestions T o validate a de vice , do one of the fo llowing: Check the end of probe pe ak and labe l when the v esse l or chamb ...
31 Reference Manu al 00809-1600-4530, Rev AA Section 5: Additional Options March 2015 Additional Options Sec t ion 5 Addition al Options Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 31 Sign al Quality Metrics (SQM) . . . . . . . . . . . . . . . . . . ...
32 Reference Manu al 00809-1600-4530, Rev AA Section 5: Additional Options March 2015 Add ition al Op tions In R ose mount Rad ar Ma ste r: 1. Connec t to t he device. 2. Right c lick on the devic e and se lect Pro per ties . 3. If “Diagnostics Suite” is mentioned in the Device Sof t ware Configuration 2 list, the device supports Signal Qua ...
33 Reference Manu al 00809-1600-4530, Rev AA Section 5: Additional Options March 2015 Additional Options 5.3.1 High lev e l supe r vision Additi onally, the refl ec tor ’s un ique e cho chara c terist ics aid th e tra nsm itter to locate a liqu id surface abov e the reflector , there b y off e ring incre as ed reli abil it y to det ect high leve ...
34 Reference Manu al 00809-1600-4530, Rev AA Section 5: Additional Options March 2015 Add ition al Op tions ...
35 Reference Manu al 00809-1600-4530, Rev AA Section 6: SIS Installations March 2015 SI S Installations Sec tion 6 SI S Installa tions Installa tion in SI S applic ations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 35 Conf iguring in SI S applic ations . . . . . . . . . . . . . . . . . . . . ...
36 Reference Manu al 00809-1600-4530, Rev AA Section 6: SIS Installation s March 2015 SI S Installa tions 6.2 Configuring in SIS applications Use a H ART ® compli ant ma ste r , such as R ose mount Rad ar Mast er (RRM) or a Field Communi cato r , to comm unicat e with and v eri fy con figura tion o f the R ose moun t 5300 Se ries. These instructio ...
37 Reference Manu al 00809-1600-4530, Rev AA Section 6: SIS Installations March 2015 SI S Installations Site acce ptance Af ter installa tion and/or configuration, proper ope ration of the transmitte r (including ve rification of all configuration changes) must be ve rified. A site accep tance test is theref ore required. The proof test outlined in ...
38 Reference Manu al 00809-1600-4530, Rev AA Section 6: SIS Installation s March 2015 SI S Installa tions Suggested c omprehensiv e proo f test The suggested proof t est described below de tects approxim ate ly 89% in of pos sible Dangerous Undetected (DU) failures in the R o semoun t 5300 Series T ransmitt ers. 1. Bypass the safe t y func tion and ...
39 Reference Manu al 00809-1600-4530, Rev AA Section 6: SIS Installations March 2015 SI S Installations 5. Using L oop T est, ent er c urren t value (mA) repr esen ting low al arm curren t. V e rify that analog output c urren t and terminal voltage are c orrect using re fe re nce me te rs. Thi s s tep tes ts fo r p ossib le qu iescent cur r ...
40 Reference Manu al 00809-1600-4530, Rev AA Section 6: SIS Installation s March 2015 SI S Installa tions Figure 6-2. Range V alues 9. Rest ore the loop to full operation. 10. Re mov e the bypass from the safety Programmable Logic Controll er (PL C) or otherw ise restore normal operation. 11. Document “ a s found” c onditions and test results u ...
41 Reference Manu al 00809-1600-4530, Rev AA Appendix A: Commissioning Checklist March 2015 Commis sioning C hecklist Appe ndix A C ommissioning Checklist Note Not all fields in this form are applicable to all transmitters. A .1 Plant inf ormation This produc t data sheet cov ers both HART ® and F OUNDA TION ™ f iel db us p rot oco ls un le ss s ...
42 Reference Manu al 00809-1600-4530, Rev AA Appendix A: Commissioning Checklist March 2015 Commi ssion ing Chec kli st A .1.2 T ank in f orma tion Completed Not completed Shor t application description: Ta n k t y p e : V e r tical c ylinder Horiz on tal cylinder Spherical Cubi ca l Solid produ ...
43 Reference Manu al 00809-1600-4530, Rev AA Appendix A: Commissioning Checklist March 2015 Commis sioning C hecklist A .1.3 Mech anical installation Complete d Not c ompleted Comm on Mounting type: Pipe/cham ber No zzle Direct/bracke t Nozzle diameter: Nozzle heigh t: Nozzle orient ation (positio n on tan k ...
44 Reference Manu al 00809-1600-4530, Rev AA Appendix A: Commissioning Checklist March 2015 Commi ssion ing Chec kli st A .1.4 Elec trical inst alla tion Comp leted Not completed Po wer supply within limits YES NO V o ltage measured a t the termin al at the transmitter: Groundings according to manual and local regul ...
45 Reference Manu al 00809-1600-4530, Rev AA Appendix A: Commissioning Checklist March 2015 Commis sioning C hecklist A .1.5 Is the produc t’s Ex cl a ssifica tion in acc ord anc e with requireme n ts? YES NO For more in fo rmation see Section: “ Complet e the basic c onfiguration ” on page 3 and Sect ion “Echo cur ve ve ri ...
46 Reference Manu al 00809-1600-4530, Rev AA Appendix A: Commissioning Checklist March 2015 Commi ssion ing Chec kli st A .2 Ec ho tuning A .3 Backups and plots Comp leted Not completed For more in form ation see Section: “ Complet e the advanced con figuration” on page 7 and “Review echo cur ve” on page 10 l. Configur atio ...
47 Reference Manu al 00809-1600-4530, Rev AA Appendix A: Commissioning Checklist March 2015 Commis sioning C hecklist A .4 GWR radar v erification in c hambers UNIT: Not e: V erification procedure is per formed under ambient c onditions. For dynamic vapor compe nsations units, e nsure tha t the DC is calcula ted at 1.0 be fore starting verifica tio ...
48 Reference Manu al 00809-1600-4530, Rev AA Appendix A: Commissioning Checklist March 2015 Commi ssion ing Chec kli st In need of suppor t with a transmitter , send a c o mmissioning re por t togeth e r with a backup file from the transmitter to your local Emer son Process Man age ment represe ntativ e . 10 V e rification at filled condition (URV ...
49 Reference Manu al 00809-1600-4530, Rev AA March 2015 ...
Reference Manu al 00809-1600-4530, Rev AA March 2015 Ro semount W orld Headquar ters Emerson Process Management 6021 Innovation Blvd Shakopee, MN 55379, USA +1 800 999 9307 or +1 952 906 8888 +1 952 949 7001 RFQ.RMD-RCC@EmersonProcess.com Nor th Americ a Regional Office Emerson Process Management 8200 Market Blvd. Chanhassen, MN 55317, USA +1 8 ...
Emerson 5300のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 5300の取扱説明書
- Emersonの製品カード
- パンフレット
- またはEmerson 5300の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Emerson 5300の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Emerson 5300の取り付け説明書、サービスマニュアル、簡易説明書、またはEmerson 5300のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Emerson 5300の製品を使用するにあたって最も人気のある説明書を閲覧できます。
Emerson 5300デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがEmerson 5300を使用するのを助ける技術的文書のことです。説明書は通常、全てのEmerson 5300ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Emersonの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Emerson 5300の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははEmerson 5300の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Emerson 5300に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Emerson 5300デバイスの基本機能を使うにあたってのヒント。 Emerson 5300のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Emerson 5300に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるEmerson 5300のメーカー/サービスへの連絡先に関する情報。
Emerson 5300についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもEmerson 5300の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがEmerson 5300で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。