Graco Model 214624の取扱説明書

16ページ 0.39 mb
ダウンロード

ページに移動 of 16

Summary
  • Graco Model 214624 - page 1

    Fluid Filters 5000 psi (350 bar , 35 MPa) Maximum Working Pressure Model 238620, Series A Exposed Mounting Model 214724, Series E Cover Mounting Model 289310, Series A Cover Mounting Fluid Filter 7252 psi (500 bar , 50 MPa) Maximum Working Pressure Model 237069, Series A Exposed Mounting Surge T anks (with filter) 5000 psi (350 bar , 35 MPa) Maximu ...

  • Graco Model 214624 - page 2

    307296 2 T able of Contents W arnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surge T ank Conversion Kits 4 . . . . . . . . . . . . . . . . . . . . . Operation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Graco Model 214624 - page 3

    307296 3 Installation T ypical Mountings See Fig. 1 for typical mountings. See page 14 for the mounting hole layout. Install the surge tank or filter near the pump outlet. Position the surge tank so the labels face away from the pump and so the setscrews, near the top and bottom of the tank, face toward the pump. The top of the surge tank must alwa ...

  • Graco Model 214624 - page 4

    307296 4 Surge T ank Conversion Kits Surge T ank Conversion Kits 238634 and 237704 Use Conversion Kits 238634 or 237704 to add a surge tank to a pump. Kit 238634 includes surge tank 238623 (A) and clamp 238630 (B). Kit 237704 includes surge tank 214624 (A), clamp 238630 (B), and attach- ing hardware (C). Connect the surge tank to the fluid outlet ( ...

  • Graco Model 214624 - page 5

    307296 5 Operation Before operating the equipment, be sure the drain valve is closed. Flush the equipment with a compatible solvent to remove oil used for factory testing and rust prevention. If you notice excessive surging at the spray gun, shut off the pump, trigger the gun to relieve fluid pressure, and open the drain valve (D) at the bottom of ...

  • Graco Model 214624 - page 6

    307296 6 Service Pressure Relief Procedure W ARNING SKIN INJECTION HAZARD The system pressure must be manually relieved to prevent the system from starting or spraying accidentally . Fluid under high pressure can be injected through the skin and cause serious injury . T o reduce the risk of an injury from injection, splashing fluid, or moving parts ...

  • Graco Model 214624 - page 7

    1007 1 3 2 1 2 3 4 5 6 23 24 25 18 19 20 21 22 10 11 14 12 15 12 16 13 17 See Accessories for other available screens. Replace filter support if ridges are worn down. 7 Do not damage PTFE o-ring (7). Lubricate and bend into kidney shape, then push into groove. 1 2 3 4 Lubricate. 4 307296 7 Parts Model 214724, Series E Model 289310, Series A Include ...

  • Graco Model 214624 - page 8

    05908 1 3 2 1 2 3 4 5 6 10 2 2 8 26 9 See Accessories for other available screens. Replace filter support if ridges are worn down. 7 Do not damage PTFE o-ring (7). Lubricate and bend into kidney shape, then push into groove. 1 2 3 4 Lubricate. 4 28 27 307296 8 Parts Model 238620, Series A Includes items 1–28 Ref No. Part N o. Description Qty Ref ...

  • Graco Model 214624 - page 9

    1 3 2 1 2 3 4 5 6 10 2 2 8 26 9 See Accessories for other available screens. Replace filter support if ridges are worn down. 7 Do not damage PTFE o-ring (7). Lubricate and bend into kidney shape, then push into groove. 1 2 3 4 Lubricate. 4 05909 307296 9 Parts Model 237069 Includes items 1–26 Ref No. Part N o. Description Qty Ref No. Part No. Des ...

  • Graco Model 214624 - page 10

    1004 11 3 2 12 15 14 33 16 15 31 13 1 2 3 5 6 7 8 9 10 24 25 26 27 28 29 11 3 2 12 13 23 30 31 19 17 32 17 21 18 22 34 1 2 See Accessories for other available screens. Replace filter support if ridges are worn down. Do not damage PTFE o-ring (13). Lubricate and bend into kidney shape, then push into groove. T orque to 150 ft–lb (200 N.m). T orque ...

  • Graco Model 214624 - page 11

    05907 11 3 2 14 15 31 1 2 3 5 6 7 8 9 10 12 34 1 2 See Accessories for other available screens. Replace filter support if ridges are worn down. Do not damage PTFE o-ring (13). Lubricate and bend into kidney shape, then push into groove. T orque to 150 ft–lb (200 N.m). T orque to 40 in–lb (4.5 N.m). 4 5 3 1 2 5 3 Lubricate. 6 4 6 6 3 3 5 5 3 3 1 ...

  • Graco Model 214624 - page 12

    1006 1 2 3 6 23 24 25 18 19 20 21 22 14 15 16 13 17 5 3 2 8 9 7 11 10 12 28 27 28 29 3 5 11 Do not damage PTFE o-ring (9). Lubricate and bend into kidney shape, then push into groove. T orque to 150 ft–lb (200 N.m). T orque to 40 in–lb (4.5 N.m). 4 5 3 Lubricate. 6 6 6 5 5 3 3 3 3 4 307296 12 Parts Model 214623, Series A Includes items 1–12, ...

  • Graco Model 214624 - page 13

    307296 13 Accessories Use Only Genuine Graco Parts and Accessories SURGE T ANK CLAMPS 238630 For surge tanks mounted in the fluid outlet of the displacement pump. Install the clamp in the optional outlet at the base of the air motor . Requires 100902 screw , 100016 lockwasher and 100015 nut. 100016 100015 100902 172865 For surge tanks mounted in th ...

  • Graco Model 214624 - page 14

    307296 14 T echnical Data Category Data Maximum Working Pressure Model 237069: 7252 psi (500 bar , 50 MPa) All Other Models: 5000 psi (350 bar , 35 MPa) Weight Model 214623: 30 lb (13 kg) Model 214624: 31.5 lb (14 kg) Model 214724: 13 lb (6 kg) Model 214725: 34 lb (15 kg) Model 214726: 34 lb (15 kg) Model 237069: 10.5 lb (4.5 kg) Model 238620: 10.5 ...

  • Graco Model 214624 - page 15

    307296 15 Dimensions 1005 1008 A* B C D L F E J G K D H F E L K C A* B * For models 238620 and 238623, add approximately 6 in. (152 mm) to the “A” dimension to account for the drain tube and fitting. J Filters Paint Surge T anks Mastic Surge T anks Dimensions 238620 237069 214724 & 289310 214624 & 238623 214726 214623 214725 A (see * no ...

  • Graco Model 214624 - page 16

    307296 16 The Graco Standard W arranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from ...

メーカー Graco カテゴリー Water Dispenser

Graco Model 214624のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- Model 214624の取扱説明書
- Gracoの製品カード
- パンフレット
- またはGraco Model 214624の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Graco Model 214624の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Graco Model 214624の取り付け説明書、サービスマニュアル、簡易説明書、またはGraco Model 214624のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Graco Model 214624の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Graco Model 214624デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがGraco Model 214624を使用するのを助ける技術的文書のことです。説明書は通常、全てのGraco Model 214624ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Gracoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Graco Model 214624の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははGraco Model 214624の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Graco Model 214624に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Graco Model 214624デバイスの基本機能を使うにあたってのヒント。 Graco Model 214624のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Graco Model 214624に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるGraco Model 214624のメーカー/サービスへの連絡先に関する情報。

Graco Model 214624についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもGraco Model 214624の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがGraco Model 214624で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)