-
AVE TDCT-Pro - page 1
1 TDCT -Pro T ime-Date-Character-T itle Operation Manual March 2007 ...
-
AVE TDCT-Pro - page 2
2 Content s 1. INTRODUCTION ............................................... 3 2. FEA TURES ........................................................ 3 3. PROGRAMMING ............................................... 4 3 .1 Front Control Panel .................................................. 4 3.2 Main Programming Menu ............................... ...
-
AVE TDCT-Pro - page 3
3 1. INTRODUCTION Introduction The TDCT -Pro is the powerful time, date, character , and titler which has all the features of existing TDCT products (TDCT -T , mTDCT , TDCT -60, TDCT -Military , MTDCT , STDCT , mSTDCT , and mSVTDCT). Daylight Savings time is also supported along with a set of RS-232 commands allows the master unit to be programmed ...
-
AVE TDCT-Pro - page 4
4 3. PROGRAMMING TDCT -Pro has an easy programmable option that can be ac- cessed by pressing “UP”, “DOWN”, “SET”, button andby press- ing and releasing the “RESET” button. Figure 2: Four Front Pannel Push Buttons of TDCT -Pro 3.1 FRONT CONTORL P ANEL The front panel controls are provided to allow simple chang- ing of the display’ ...
-
AVE TDCT-Pro - page 5
5 Changing the Gray scale Down Up Set Reset 1) Press and hold the “Down” button 2) Press and release the “Reset” button 3) Release the “Down” button 4) Press “Down” or “Up” to select the Gray scale 5) When choice is made, press and release the “Reset” button Changing the Horizontal Position Down U p Set Reset 1) Press and ho ...
-
AVE TDCT-Pro - page 6
6 Following is a detailed description of the Menu selections and the programming capabilities of the TDCT -Pro. 3.2 Main Programming Menu Note: If a sub menu has an "EXIT" selection, always go there and press "SET". Pressing "RESET" at the main menu exits you from the program 3.3 Set Master / Slave This programming fea ...
-
AVE TDCT-Pro - page 7
7 PROGRAMMING CONT . By selecting the Set Address between 0 to 254 make TDCT -Pro to act as a slave and that make TDCT -Pro ready to receive command from the master . Selecting “ANY” will make TDCT -Pro as a stand-alone unit. Selecting “MSTR” make the TDCT -Pro to act as a master . TDCT -Pro can sense all the slaves by pressing the reset bu ...
-
AVE TDCT-Pro - page 8
8 PROGRAMMING CONT . T ime Display can be programmed on or off by selecting ON or off. Date can be displayed in 1 line or , 2 lines or can be pro- grammed off by selecting Date display feature. If the counter is turned on then the date is automatically displayed in the 2nd line. The Counter can be programmed either as a field counter or as 1/10 th ...
-
AVE TDCT-Pro - page 9
9 The title can be programmed either ON or OFF by selecting ON or OFF from the tiler menu. A 20 characters title can be entered by selecting the title from the programming menu. 3.8 Screen Setup Character size, position, and gray scale is programmed from this menu. Following menu pop ups when selected Screen setup from the main program menu. • Ch ...
-
AVE TDCT-Pro - page 10
10 4. Cables 4.1 Cable User are able to program TDCT -Pro via RS232C by TDCT - Pro software for Windows. The cable is optional for this product. COM1 or COM2 (Newer computer required COM1 cable) cable are needed if RS-232 device is used to set the time and date and title of the TDCT -Pro See Appexdix for TDCT -Pro software and command set. Figure 3 ...
-
AVE TDCT-Pro - page 11
11 APPENDIX TDCT -Pro Software T o send the title to the TDCT -Pro first enters the address of the TDCT - Pro in the address window . After that enter the title in the title window and press the send button. T o change and time and date, enter the time and date and press the send button. Pressing the update button will get the system time in the ti ...
-
AVE TDCT-Pro - page 12
12 RS232 Command Protocol 1. Up date Titler(Master) Command /TT ( Address )< Title >< CR > Description This command is only support Master mode Address (1 byte) 0 - 255 Title (1-20 bytes) text strings < CR > (1 byte) Carriage return TDCT -Pro Windows Software Main Menu ...
-
AVE TDCT-Pro - page 13
13 Ex Update titler at address 65 with Camera 65 /TT ACamera 65 < CR > / 0x2F T 0x54 T 0x54 A 0x41 Address 65 C 0x43 a 0x61 m 0x6D e 0x65 r 0x72 a 0x61 space 0x20 6 0x36 5 0x35 < CR > 0x0D Carriage return 2. Up date Hour Command /Hxx Description H (1 byte) Hour xx (2 bytes) 00-23 ;00=12AM,01=1AM,..,12=12PM,13=1PM,..,23=1 1PM Ex Update h ...
-
AVE TDCT-Pro - page 14
14 M (1 byte) Minute xx (2 bytes) 00-59 Ex Update minute = 3 /M03 / 0x2F M 0x4D 0 0x30 3 0x33 4.Up dateY ear Command /Yxx Description Y (1 byte) Y e ar xx (2 bytes) 00-99 ; 00=2000,01=2001,..,10=2010,..,99=2099 Ex Update Y ear = 2007 /Y07 / 0x2F Y 0x59 0 0x30 7 0x37 5.Up date Month Command /mxx Note: m is a small letter Description m (1 byte) Month ...
-
AVE TDCT-Pro - page 15
15 6.Up date Date Command /Dxx Description D (1 byte) Date xx (2 bytes) 01-31 Ex Update Date = 5 /D05 / 0x2F D 0x44 0 0x30 5 0x35 7.Up date Titler(Slave) Command /T ( Address )< Title >< CR > Description This command is only support Slave mode Address (1 byte) 0 - 255 Title (1-20 bytes) text strings < CR > (1 byte) Carriage return ...
-
AVE TDCT-Pro - page 16
16 ASIA A VE (Thailand) Co., Ltd. 217/4 Crystal Garden Soi 4 (Nanatai), Sukhumvit Rd. Klongtoey , Klongtoey Bangkok, 101 10 Thailand T el: 662-656-8231 Fax: 662-656-9554 Email: ave@avethailand.com www .avethailand.com NORTH AMERICA A VE USA 2000 West Governors Circle, Suite E Houston, T exas 77092 T el: 281-443-2300 Fax: 281- 443-8915 Email: aveus@ ...
AVE TDCT-Proについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもAVE TDCT-Proの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAVE TDCT-Proで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。