-
TRENDnet TV-IP410W - page 1
T V-IP410 T V-IP410W H/W : A1 .0R Quick Inst allation Guide ...
-
TRENDnet TV-IP410W - page 2
Table of Contents English ...................................................................................................... 1 1 4 3 9 1. Before Y ou Start 2. Hardware Installation ......................................................................... 3. Configure the Internet Camera .......................................................... ...
-
TRENDnet TV-IP410W - page 3
System Requirements Package Contents 1. Before Y ou Start English 1 ? ? Utility CD-ROM ? Multi-Language Quick Installation Guide ? 1 x 2dBi Detachable Antenna ( ? GPIO Adapter ? ? Mounting Kit ? Power Adapter (12VDC, 1.5A) TV -IP410 / TV -IP410W TV -IP410W) RJ-45 Cable ? ? Wireless router or access point (TV -IP410W) ? ? ? ? ? 10/100Mbps Ethernet C ...
-
TRENDnet TV-IP410W - page 4
Application English 2 Wireless 54Mbps 100Mbps Family Monitoring (TV -IP410W) Business Monitoring (TV -IP410) Property Monitoring (TV -IP410) Cable/DSL Modem Internet Home Monitoring (TV -IP410W) Wireless N Gigabit Router (TEW-633GR) Family Monitoring (TV -IP410) Business Monitoring (TV -IP410W) Property Monitoring (TV -IP410W) Cable/DSL Modem Inter ...
-
TRENDnet TV-IP410W - page 5
2. Hardware Installation English 3 3. Connect the AC Power Adapter to the Internet Camera Server and then to a power outlet. 2. Connect a RJ-45 network cable from a Switch/Router to the Ethernet port of the Internet Camera Server . 1. Attach the Antenna . (TV -IP410W) 4. V erify the Power and Link LEDs are on. ...
-
TRENDnet TV-IP410W - page 6
English 4 3. Configure the Internet Camera Note: 1. It is recommended that you configure the Internet Camera from a wired computer . 2. If you would like to use SecurView software, please refer to the User's Guide on the CD for more information. 2. Follow the IPSetup Setup Wizard instructions and then click Next . 3. Click Close . 4. Go to Sta ...
-
TRENDnet TV-IP410W - page 7
English 5 5. Select the camera server and click Change IP . 6. Configure the IP address to be in the same subnet as your network, type in the Administrator ID and Password and click Change . By default: ID: admin Password: admin 7. Click OK and wait 30 seconds. 8. Click OK . Note: By default, the IP setting on the TV -IP410/TV -IP410W is set to DHC ...
-
TRENDnet TV-IP410W - page 8
1 1. Right click and select Install ActiveX Control . 12. Click Install . English 6 10. Enter the User name and Password, and then click OK . By default: User Name: admin Password: admin Note : If you have the TV -IP410W , continue on to step 13. If you have the TV -IP410, skip to step 16. 9. Double click the camera server to access the browser con ...
-
TRENDnet TV-IP410W - page 9
15. Disconnect the RJ-45 cable and unplug the power . Then plug the power back in (TV -IP410W). English 7 14. Click Site Survey . Select your wireless network. If encryption is enabled, select the proper Authentication type, enter the Pre-Shared Key and then click apply . (Example shows WP A2-PSK. If your wireless network does not support WP A, sel ...
-
TRENDnet TV-IP410W - page 10
17. Click Live View . English 8 Y our installation is now complete. Note : For detailed information regarding the TV -IP410/ 410W configuration and advanced settings, please refer to the T roubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www .trendnet.com. TV -IP Register Y our Product T o ensure ...
-
TRENDnet TV-IP410W - page 11
Q1: A1: Q2: A2: Q3: A3: Q4: A4: Q5: A5: Q6: A6: Q7: A7: IP Setup is unable to detect my camera. What should I do? First, verify that you have followed all the steps in the Section 2: Hardware Installation. Second, disable any software firewall programs such as ZoneAlarm or Norton Internet Security . If you are using Windows XP or Windows Vista, dis ...
-
TRENDnet TV-IP410W - page 12
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. NOTE: THE MANUF ACTURER IS NOT RESPONSIBL ...
-
TRENDnet TV-IP410W - page 13
Copyright ©2008. All Rights Reserved. TRENDnet. P r o d u ct Wa r r a n t y Re g is t r a t io n Please take a moment t o r egist er your pr oduct online. Go to TRENDne t’s website at http://www .trendne t.com/regis t er 206 7 5 Manhatt an Place T orr ance, CA 9050 1 USA ...
TRENDnet TV-IP410Wについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもTRENDnet TV-IP410Wの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがTRENDnet TV-IP410Wで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。