-
JVC GET0624-003A - page 1
FRANÇAIS ENGLISH GET0624-003A [E/EU] EN, FR 1009DTSMDTJEIN © 2009 Victor Company of Japan, Limited For canceling the display demonstration, see page 4. / Pour annuler la démonstration des affichages, référez-vous à la page 4. CD RECEIVER / RÉCEPTEUR CD KD-R412 / KD-R411 / KD-R35 / KD-R312 / KD-R311 INSTRUCTIONS MANUEL D’INSTRUCTIONS For in ...
-
JVC GET0624-003A - page 2
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; ...
-
JVC GET0624-003A - page 3
3 ENGLISH How to read this manual The following icons/symbols are used to indicate: Press and hold the button(s) until the desired operation begins. Turn the control dial. Turn the control dial to make a selection, then press to confirm. ( XX) Reference page number <XXXX> Menu setting item Continued on the next page How to attach/detach the c ...
-
JVC GET0624-003A - page 4
4 ENGLISH 1 Turn on the power. 2 3 Setting the clock 4 Select <DEMO OFF>. 5 6 Finish the procedure. Canceling the display demonstration 6 Adjust the minute. 7 Select <24H/12H>. 8 Select <24 HOUR> or <12 HOUR>. 9 Finish the procedure. 1 Turn on the power. 2 3 Select < CLOCK >. 4 Select < CLOCK SET >. 5 Adjust the ...
-
JVC GET0624-003A - page 5
5 ENGLISH Basic operations Control dial Ejects the disc Loading slot Remote sensor (for KD-R412/KD-R411) You can control this unit with an optionally purchased remote control, RM-RK50 ( 12). Display window Auxiliary input jack Detaches the panel When you press or hold the following button(s)... Button General operation • Turns on. • Selects the ...
-
JVC GET0624-003A - page 6
6 ENGLISH Manual search [Hold] “M” flashes, then press the button repeatedly. When an FM stereo broadcast is hard to receive 1 2 ] <TUNER> ] <MONO> ] <MONO ON> Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure to select <MONO OFF>. Changing the display information ...
-
JVC GET0624-003A - page 7
7 ENGLISH Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” 1 ] “92.50MHz” 2 “PRESET MODE” flashes. 3 ] Selects preset number “04.” “P04” flashes and “MEMORY” appears. Selecting a preset station or 1 2 The following features ...
-
JVC GET0624-003A - page 8
8 ENGLISH Stopping playback and ejecting the disc “NO DISC” appears. Press / SOURCE to listen to another playback source. Listening to a disc ~ ] Turn on the power. Ÿ All tracks will be played repeatedly until you change the source or eject the disc. Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. PTY Standby Re ...
-
JVC GET0624-003A - page 9
9 ENGLISH Selects folder of the MP3/WMA Selects track Fast-forwards or reverses the track Selecting a track/folder 1 2 For MP3/WMA discs, select the desired folder, then the desired track by repeating step 2 . • To return to the previous menu, press BACK . Caution on volume setting: Discs produce very little noise compared with other sources. Low ...
-
JVC GET0624-003A - page 10
10 ENGLISH Listening to the USB device (For KD-R412/KD-R411/KD-R35) This unit can play MP3/WMA tracks stored in a USB device. ~ ] Turn on the power. Ÿ All tracks will be played repeatedly until you change the source or detach the USB device. If a USB device has been attached... Pressing / SOURCE turns on the power and playback starts from where it ...
-
JVC GET0624-003A - page 11
11 ENGLISH Listening to the other external components You can connect an external component to the AUX (auxiliary) input jack on the control panel. Preparation: Make sure <AUX ON> is selected for the <SRC SELECT> = <AUX IN> setting. ( 16) • For details, refer also to the instructions supplied with the adapter or external compone ...
-
JVC GET0624-003A - page 12
12 ENGLISH 1 • Turns the power on if pressed briefly. When the power is on, pressing the button also mutes the sound or pauses. To cancel muting or resume playback, press the same button again. • Turns the power off if pressed and held. 2 • Changes the preset stations. • Changes the folder of the MP3/WMA. 3 Adjusts the volume level. 4 Selec ...
-
JVC GET0624-003A - page 13
13 ENGLISH Selecting a preset sound mode You can select a preset sound mode suitable for the music genre. FLAT = NATURAL = DYNAMIC = VOCAL BOOST = BASS BOOST = USER = (back to the beginning) While listening, you can adjust the tone level of the selected sound mode. 1 2 Adjust the level (–06 to +06) of the selected tone (BASS / MIDDLE / TREBLE). T ...
-
JVC GET0624-003A - page 14
14 ENGLISH Category Menu item Selectable setting, [ Initial: Underlined ] CLOCK 24H/12H Time display mode • 24 HOUR • 12 HOUR : For settings, 4. CLOCK ADJ * 1 Clock adjustment • AUTO • OFF : The built-in clock is automatically adjusted using the CT (clock time) data in the Radio Data System signal. : Cancels. PRO EQ BASS — : For settings, ...
-
JVC GET0624-003A - page 15
15 ENGLISH Category Menu item Selectable setting, [ Initial: Underlined ] TUNER TA VOLUME * 5 Traffic announcement volume • VOLUME 00 – VOLUME 50 (or VOLUME 00 – VOLUME 30) * 6 [ VOLUME 15 ] : — P-SEARCH * 5 Programme search • SEARCH ON • SEARCH OFF : Activates Programme Search. ( 8) : Cancels. MONO * 7 Monaural mode • MONO ON • MON ...
-
JVC GET0624-003A - page 16
16 ENGLISH Category Menu item Selectable setting, [ Initial: Underlined ] AUDIO VOL ADJUST Volume adjust (For KD-R412/ KD-R411/KD-R35) VOL ADJ –05 — VOL ADJ +05 [ VOL ADJ 00 ] : Preset the volume adjustment level of each source (except FM), compared to the FM volume level. The volume level will automatically increase or decrease when you change ...
-
JVC GET0624-003A - page 17
17 ENGLISH More about this unit Basic operations General • If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power. • If no operation is done for about 60 seconds after pressing MENU button, the operation will be canceled. Tuner operations Storing statio ...
-
JVC GET0624-003A - page 18
18 ENGLISH • Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, or for the following reasons: – Discs are dirty or scratched. – Moisture condensation has occurred on the lens inside the unit. – The pickup lens inside the unit is dirty. – The files on the CD-R/CD-RW are written using the “Packet Wr ...
-
JVC GET0624-003A - page 19
19 ENGLISH Playing MP3/WMA tracks from a USB device (for KD-R412/KD-R411/ KD-R35) • While playing from a USB device, the playback order may differ from other players. • This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions. • Depending on the shape of the USB devices and conne ...
-
JVC GET0624-003A - page 20
20 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvents (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs. To play new discs New discs may have some rough spots around the inne ...
-
JVC GET0624-003A - page 21
21 ENGLISH Troubleshooting Symptom Remedy/Cause General Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Make sure the unit is not muted/paused ( 5). • Check the cords and connections. “PROTECT” appears on the display and no operations can be done. Check to be sure the terminals of the speaker leads are ...
-
JVC GET0624-003A - page 22
22 ENGLISH Symptom Remedy/Cause MP3/WMA playback Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names. Noise is generated. Skip to another track or change the disc. (Do not add the exte ...
-
JVC GET0624-003A - page 23
23 ENGLISH Symptom Remedy/Cause USB device playback (for KD-R412/KD-R411/KD-R35) Noise is generated. The track played back is not an MP3/WMA track. Skip to another file. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) “READING” keeps flashing on the display. • Readout time varies depending on the USB dev ...
-
JVC GET0624-003A - page 24
24 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/ Rear: 50 W per channel Continuous Power Output (RMS): Front/ Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz ...
-
JVC GET0624-003A - page 25
25 ENGLISH CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 93 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max. ...
-
JVC GET0624-003A - page 26
FRANÇAIS ENGLISH GET0624-003A [E/EU] EN, FR 1009DTSMDTJEIN © 2009 Victor Company of Japan, Limited For canceling the display demonstration, see page 4. / Pour annuler la démonstration des affichages, référez-vous à la page 4. CD RECEIVER / RÉCEPTEUR CD KD-R412 / KD-R411 / KD-R35 / KD-R312 / KD-R311 INSTRUCTIONS MANUEL D’INSTRUCTIONS For in ...
-
JVC GET0624-003A - page 27
1 KD-R418 CD RECEIVER : INSTRUCTIONS/INSTALLATION 1009DTSMDTJEIN EN © 2009 Victor Company of Japan, Limited GET0632-001A [J] 1 Turn on the power. 2 3 Canceling the display demonstration 4 Select < DEMO OFF >. 5 6 Finish the procedure. Setting the clock 1 Turn on the power. 2 3 Select < CLOCK >. 4 Select < CLOCK SET >. 5 Adjust th ...
-
JVC GET0624-003A - page 28
2 Listening to the radio ~ ] “FM” or “AM” Ÿ “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength. Manual search “M” flashes, then press the button repeatedly. When an FM stereo broadcast is hard to receive 1 2 ] <TUNER> ] <MONO> ] <MONO ON> Reception improves, but stereo effect will ...
-
JVC GET0624-003A - page 29
3 1 2 3 Repeat step 2 if necessary. • To return to the previous menu, press BACK . • To exit from the menu, press DISP or MENU . Category Menu item Selectable setting, [ Initial: Underlined ] DEMO DEMO • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds. : Cancels. CLOCK ...
-
JVC GET0624-003A - page 30
4 Installation This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers. Prepare these before installation.... Warnings • To prevent short circuits: – Disconnect the battery’s negative terminal an ...
-
JVC GET0624-003A - page 31
5 Troubleshooting Symptom Remedy/Cause General Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Make sure the unit is not muted/paused. (See page 1.) • Check the cords and connections. “PROTECT” appears on the display and no operations can be done. Check to be sure the terminals of the speaker leads are ...
-
JVC GET0624-003A - page 32
6 Specifications AUDIO AMPLIFIER SECTION Power Output: 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal-to-Noise Ratio: 80 dBA (reference: 1 W into 4 Ω) Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz) Q1.0, Q1.25, Q1.5, Q2.0 Middle: ±12 dB (0.5 kHz, 1.0 kHz, 1.5 kHz, 2.5 kHz) Q0 ...
-
JVC GET0624-003A - page 33
1 IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments. 4. REPRODUCTION OF LABEL: CAUT ...
-
JVC GET0624-003A - page 34
2 Listening to the disc ~ ] Turn on the power. Ÿ All tracks will be played repeatedly until you change the source or eject the disc. Listening to the external components You can connect an external component to the AUX (auxiliary) input jack on the control panel. • Make sure <AUX ON> is selected for the <SRC SELECT> = <AUX IN> ...
-
JVC GET0624-003A - page 35
3 1 2 3 Repeat step 2 if necessary. • To return to the previous menu, press BACK . • To exit from the menu, press DISP or MENU . Category Menu item Selectable setting, [ Initial: Underlined ] DEMO DEMO • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds. : Cancels. CLOCK ...
-
JVC GET0624-003A - page 36
4 More about this unit – Disc format: ISO 9660 Level 1/ Level 2, Romeo, Joliet, Windows extension • The maximum number of characters for file/folder names (includes 4 extension characters—<.mp3> or <.wma>): 12 — 128 characters (depending on the media used, etc.). • This unit can recognize a total of 512 files, 255 folders, and ...
-
JVC GET0624-003A - page 37
1 – EN KD-S27 CD RECEIVER : INSTRUCTIONS/INSTALLATION 0710DTSMDTJEIN EN © 2010 Victor Company of Japan, Limited GET0698-001A [J] 1 Turn on the power. 2 3 Canceling the display demonstration 4 Select < DEMO OFF >. 5 6 Finish the procedure. Setting the clock 1 Turn on the power. 2 3 Select < CLOCK >. 4 Select < CLOCK SET >. 5 Adj ...
-
JVC GET0624-003A - page 38
2 – EN Listening to the radio ~ ] “FM” or “AM” Ÿ “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength. Manual search “M” flashes, then press the button repeatedly. When an FM stereo broadcast is hard to receive 1 2 ] <TUNER> ] <MONO> ] <MONO ON> Reception improves, but stereo effe ...
-
JVC GET0624-003A - page 39
3 – EN 1 2 3 Repeat step 2 if necessary. • To return to the previous menu, press BACK . • To exit from the menu, press DISP or MENU . Category Menu item Selectable setting, [ Initial: Underlined ] DEMO DEMO • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds. : Cancels. ...
-
JVC GET0624-003A - page 40
4 – EN Troubleshooting Symptom Remedy/Cause General Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Make sure the unit is not muted/paused. (See page 1.) • Check the cords and connections. “PROTECT” appears on the display and no operations can be done. Check to be sure the terminals of the speaker le ...
-
JVC GET0624-003A - page 41
5 – EN Specifications AUDIO AMPLIFIER SECTION Power Output: 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal-to-Noise Ratio: 80 dBA (reference: 1 W into 4 Ω) Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz) Q1.0, Q1.25, Q1.5, Q2.0 Middle: ±12 dB (0.5 kHz, 1.0 kHz, 1.5 kHz, 2.5 ...
-
JVC GET0624-003A - page 42
6 – EN Installation The following illustration shows a typical installation. If you are not sure how to install this unit correctly, contact your JVC car audio dealer or a company supplying kits. See “Electrical connections” below. Removing the unit Release the rear section first... 8 mm (3/8") Bracket * 2 Pocket Flat head screws—M5 × ...
JVC GET0624-003Aについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもJVC GET0624-003Aの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJVC GET0624-003Aで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。