-
Kenwood KRC-408 - page 1
KRC-408 KRC-308S KRC-38MR ©B64-1525-00 (KW) Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new Cassette-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, ...
-
Kenwood KRC-408 - page 2
— 2 — English Contents Before use Safety precautions ........................................................................3 General features Power ............................................................................................5 Switching Modes ..........................................................................5 Volume ... ...
-
Kenwood KRC-408 - page 3
— 3 — To prevent injury or fire, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery, or ground wires, make sure to use automotive- grade wires or other wires with a 0.75mm 2 (AWG18) or more to prevent wire ...
-
Kenwood KRC-408 - page 4
— 4 — English • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. • Characters in the LCD may become difficult to read in temperatures below 41 ˚F (5 ˚C). • T ...
-
Kenwood KRC-408 - page 5
Switching Modes: Each time you press the SRC (source) button, the mode switches as follows: Selecting standby mode: Press the SRC button repeatedly and switch to “OFF”. When “OFF” is displayed, the standby mode is activated. The standby mode turns all functions off while leaving the power to the unit on. Use this mode when you want to have ...
-
Kenwood KRC-408 - page 6
Adjust various parameters of sound quality. Press the AUD button for at least one second to enter the control mode. Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change. Please refer to the following for the contents of the adjustment modes. Source tone memory Each source ( tape, CD, MD, ...
-
Kenwood KRC-408 - page 7
Turning clock display On/Off: Press the CLK button to switch the clock display on and off. The £ indicator lights while the clock is displayed. Clock display Press the AUD button to enter the mobile preset plan mode. Press either the 4 or ¢ button to select the type of speaker. The setting switches as follows. Flat / For the OEM speaker / For 6x9 ...
-
Kenwood KRC-408 - page 8
display the time. Press the CLK button for at least one second to enter the clock adjustment mode. The time display will blink. • Adjusting the hours Press the FM button to advance the hours, or press the AM button to make the hours go back. • Adjusting the minutes Press the ¢ button to advance the minutes, or press the 4 button to make the mi ...
-
Kenwood KRC-408 - page 9
You can choose between auto seek tuning of receivable frequencies and manual tuning. Press the SRC (source) button repeatedly to select the tuner mode. “ TUnE ” is displayed when the tuner mode has been selected. Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between FM1, FM2, and FM3 ( ...
-
Kenwood KRC-408 - page 10
Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. The factory default for this function is ON. Turning CRSC On/Off: Press the CRSC button for at least one second to turn the function on/off. The indicator lights up when CRSC is on. Strong electrical fields (such as from power lines) ...
-
Kenwood KRC-408 - page 11
Loading and Playing Cassettes: Load a cassette with the tape exposed on the right. The tape starts playing automatically. Playing Cassettes Already Loaded: Press the SRC (source) button repeatedly to select the tape mode. "TAPE" is displayed when the tape mode has been selected. Listening to the other side: Press the 23 button. Tape play ...
-
Kenwood KRC-408 - page 12
Automatically fast forward to the beginning of the next track when long blank spaces (10 seconds or more) are detected, continuing tape playback. The B.S indicator lights up when blank skip is turned on. Turning Blank Skip On/Off: Press the B.S button to switch blank skip on and off. • If the blank space contains much noise, the blank skip functi ...
-
Kenwood KRC-408 - page 13
External disc control features Repeatedly plays the track currently being listened to. Turning Music Repeat On/Off: Press the REP button to switch music repeat on/off. The REP indicator lights up when music repeat is turned on. Canceling Music Repeat: Press either the REP or 23 button. Music repeat "knows" where a track begins by detectin ...
-
Kenwood KRC-408 - page 14
Search forward or backward through the tracks on the disc until you reach the one that you want to listen to. Making a Reverse Track Search: Press the 4 button to display the desired track number. Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, and so forth. Play starts a ...
-
Kenwood KRC-408 - page 15
Successively play the beginning of each disc on a changer until you find the one that you want to listen to. Starting the disc scan: Press the D.SCN button. The SCN indicator lights up and the first 10 seconds of each disc will be played, in the order they are loaded on the changer. The disc number currently being heard blinks in the display. Stopp ...
-
Kenwood KRC-408 - page 16
To change the track being heard, press the ¢ button. Another disc/track will be selected and played. • Magazine random play is canceled when you eject the disc. • The time needed for random selection depends on the number of discs loaded in the disc magazine. NOTE 2 Play the tracks on all the discs in the disc changer in random order. Press th ...
-
Kenwood KRC-408 - page 17
— 17 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. 2 CAUTION Accessories ..........................................1 ..........................................1 ..........................................2 ................... ...
-
Kenwood KRC-408 - page 18
English — 18 — Connecting Wires to Terminals – + – + – + – + – + FRONT • L FRONT • R REAR • L REAR • R P.CONT ANT.CONT When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you ...
-
Kenwood KRC-408 - page 19
— 19 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). NOTE Accessory 2 Metal mounting strap Self-tapping screw (commerciall y available) Firewall or metal support Accessory 4 Installation ■ Installation 8 mm MAX. ø 5mm ø 5mm 8mm MAX. Installing in Japane ...
-
Kenwood KRC-408 - page 20
English — 20 — Installation Removing the hard rubber frame ■ When the lower level is removed, remove the upper two locations. 2 The frame can be removed from the top side in the same manner. NOTE Catch Lock Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in th ...
-
Kenwood KRC-408 - page 21
— 21 — Installation Accessory 7 Screwing the Faceplate on the Unit ■ Never insert the taptite screw ( ø 4 × 16 mm) in any other screw hole than the one specified. If you screw it in another hole, it will contact and may cause damage to the mechanical parts inside the unit. 2 CAUTION If you want to fasten the faceplate to the main unit so th ...
-
Kenwood KRC-408 - page 22
English — 22 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. Troubleshooting Guide SOLUTION POSSIBLE CAUSE PROBLEM The tape head is dirty. Clean the tape head, referring to the section on "Cleaning t ...
-
Kenwood KRC-408 - page 23
— 23 — External disc control mode The computer chip in the unit is not functioning normally. Press the reset button on the unit (see p. 4). The disc control mode cannot be selected. No wire has been connected to the disc changer input terminal on the unit. Connect the wire to the disc changer input terminal on the unit. The specified disc does ...
-
Kenwood KRC-408 - page 24
English — 24 — Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. Nothing has been recorded on the MD. ] The next MD will automatically be played. E-10 No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ] Load the ...
-
Kenwood KRC-408 - page 25
— 25 — FM tuner section Frequency Range (200 kHz Space) .............87.9 MHz -107.9 MHz Usable Sensitivity (S/N: 30dB)...................... 9.3 dBf (0.8 µV/75 Ω ) Quieting Sensitivity (S/N: 50dB) .................15.2 dBf (1.6 µV/75 Ω ) Frequency Response (±3.0dB) .................................30 Hz-15 kHz Signal to Noise ratio .... ...
-
Kenwood KRC-408 - page 26
KRC-408_U.S_K_ms r3 00.12.27 0:09 PM Page 26 ...
Kenwood KRC-408についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもKenwood KRC-408の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがKenwood KRC-408で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。