-
Sears 1700 - page 1
Kenmore 1700 11 GALLON CENTRAL HUMIDIFIER Installation Maintenance Repair Parts Troubleshooting Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. ...
-
Sears 1700 - page 2
contents WARRANTY ........................................... 2 BEFORE YOU START Rules for Safe Installation and Operation ................................... 2 Tools and Materials Needed .................. 2 UNDERSTANDING HUMIDITY .............. 3 SELECTING A LOCATION ..................... 4 DISASSEMBLY/CONVERSION ............. 4 INSTALLATION .... ...
-
Sears 1700 - page 3
THANK YOU? Thank you for selecting a Sears Humidifier. It will provide years of service if you give it a little care, UNDERSTANDING HUMIDITY Humidity can be puzzling, it cannot be seen, heard, touched, smelled or tasted. Many people do not understand what a humidi- fier will or will not do. Probably the best way to judge whether the humidity is too ...
-
Sears 1700 - page 4
selecting a location Consider these points as you choose the location for your hu- midifier. Locate humidifier on supply air plenum (Fig. 1) or return air plenum. If the humidifier is installed on the return air plenum, the flexible hose, round opening, is connected to the supply air plenum. If furnace is equipped with air conditioning, humidifier ...
-
Sears 1700 - page 5
Motor Bracket _ B Install motor bracket on left side. Make sure bracket is firmly seated (Fig. 6). Nylon Lance C Install wire support and nylon bearing in lances. Be sure groove in nylon bearing is toward inside of humidifier. Bend that portion of the wire support leg ex- tending below the lance, outward, to lock support in lances (Fig. 7) D After ...
-
Sears 1700 - page 6
Top Humidifier Plenum---> _.5" Minimum Clearance O o -Drill (3) Holes 1/8" Dia. - Cut Opening • Level Line & Bottom of Humidifier 2 Mount the humidifier to the hot air plenum using the three screws provided. Bend the two tabs 180 ° inward to seal the humidifier to the Plenum (Fig. 12). Bend 2 Tabs - Inward 180 ° Humidifier With ...
-
Sears 1700 - page 7
Turn handle clockwise until it has pierced the water line and valve is completely closed (Fig. 16). , _ Partially uncoil the tubing. Slide the brass compres- sion nut over the tubing. The threads in the nut must face the tubing end. Place the brass compression sleeve as shown in Fig. 16. Slip brass insert into end of tubing. 1,1[_ U:! _ U Insert th ...
-
Sears 1700 - page 8
humidistat The humidistat is designed to mount on the cold air plenum of your furnace or on an interior wall of the home. The cold air ple- num, however is the preferred location for sensing the average humidity throughout your home. Select your location and follow the appropriate instructions. NOTE: THE HUMIDISTAT AS SUPPLIED IS ASSEMBLED I FOR CO ...
-
Sears 1700 - page 9
Mountin( Screws (4) Cover-_ Hole In Wall Mounting Screws Wall Mount )_--Spacers Control Unit Humidifier Spade _ Terminals f Wall Outlet I NOTE: Make sure wall outlet is not controlled by a switch. I operation 1 Set knob to the lowest temperature predicted for a 24-hour period. Because of differences in house construction you may want to try a highe ...
-
Sears 1700 - page 10
12. Close top metal hinged cover and replace front plastic cover. 13. Plug in transformer. 14. Turn humidistat to "test" momentarily and check for media wheel rotation. Reset humidistat according to outdoor tem- perature as instructed on label and reinstall front cover. Unit is back in operation. Body Float Pivot Pin *Reverse button if it ...
-
Sears 1700 - page 11
repair parts KENMORE "1700" CENTRAL HUMIDIFIER MODEL NO. 303.14601 I I I I I / KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION 1 43134913 2 43160803 3 21605701 4 40437001 5 44006501 6 21605501 7 41102901 8 03022815 9 43128902 10 43161010 11 431491O2 12 43148901 13 21581001 14 35561801 15 STD575026 16 STD575025 17 35576102 18 420 ...
-
Sears 1700 - page 12
Kenmore 303.14601 FURNACE HUMIDIFIER MAINTENANCE NOTE: APPLY THIS LABEL WHERE IT WILL BE EASILY SEEN AND SERVE AS A REMINDER TO PERFORM THIS ROUTINE SERVICE. Regular cleaning is necessary to keep the parts free of lime deposits. Service every month during the heating season or more often depending on the water conditions. 1. Unplug transformer. 2. ...
-
Sears 1700 - page 13
Kenmore 1700 11 GALLON CENTRAL HUMIDIFIER For the repair or replacement parts you need Call 7:00 a.m. - 7:00 p.m., 7 days a week 1-800-366-PART (1-800-366-7278) For in-home major brand repair service Call 24 hours a day, 7 days a week 1-800-4-REPAIR (1-800-473-7247) For the location of a Sears Repair Service Center in your area Call 24 hours a day, ...
Sears 1700についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもSears 1700の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSears 1700で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。