TP-Link TL-PS310Uの取扱説明書

29ページ 1.58 mb
ダウンロード

ページに移動 of 29

Summary
  • TP-Link TL-PS310U - page 1

    TL-PS310U Single USB 2.0 Port MFP and Storage Server Rev: 2.0.0 1910010313 ...

  • TP-Link TL-PS310U - page 2

    Contents Chapter 1 Introduc tion ......................................................................................... 1 1.1 Product Ov ervi ew ........................................................................................................... 1 1.2 Network M anagemen t ................................................................... ...

  • TP-Link TL-PS310U - page 3

    COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product nam es are trademarks or registered trademarks of t heir respective holders. No part of the specificat ions may be reproduced in any form or by any means or used to make any derivative ...

  • TP-Link TL-PS310U - page 4

    FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Ru les. These limits are designed to provide reasonable protection against harmful interference in a residential inst allation. This eq uipment generates, uses and can radiate radio frequency energy and, if ...

  • TP-Link TL-PS310U - page 5

    1 Chapter 1 Introduction 1.1 Product Overview MFP and Storage Server enhances capability by letti ng you place your USB devices at convenient locations directly on the Ethernet network. It’s designed to connect your USB printers, MFP, and USB storage devices to your network, allowing all network users access to these USB devices remotely. 1.2 Net ...

  • TP-Link TL-PS310U - page 6

    2 2. Connect the MFP and Storage Server to the rout er or switch/HUB with the Ethernet cable. 3. Connect the power adapt er to the MFP and St orage Server. When the LINK LED lights up, the MFP and Storage Server is correct ly connected to the network. ...

  • TP-Link TL-PS310U - page 7

    3 Chapter 2 Software Installation 2.1 For Windows 2000/XP Users 1. Insert the setup CD into your CD-drive. The auto-run program will be started. Select the model. 2. Choose your operati ng system to install all software programs. ...

  • TP-Link TL-PS310U - page 8

    4 3. When the installation completed, click Finish to close the installation wizard. 4. Choose “ Yes, I want to restart m y computer now. ” to restart your computer. 5. After rebooting, you will see a new icon on your desktop. Double-click t he icon and it will bring up the MFP and Storage Server setup utility. ...

  • TP-Link TL-PS310U - page 9

    5 6. The setup utility will show up and display all the active MFP and Stor age Servers on your network. In the screen, you will see th e product listed as “ TL-PS310U-C7641B (192.168.0.10) ”. “C7641B” is the last 6 digits of the MF P and Storage Server’s MAC address, and the “192.168.0.10” is the MFP and Storag e Server’s default I ...

  • TP-Link TL-PS310U - page 10

    6 8. Configure the IP address of the print server according to your netwo rk (take 192.168.1.93 for example). And then click Set . And then click Restart Server to make the change take effect. 9. Then you will see the IP address of the print server has been changed. ...

  • TP-Link TL-PS310U - page 11

    7 2.1.1 Connecting to an USB Device 1. Connect the USB cable on your USB device to the USB port of the MFP and Storage Server, and make sure both the USB device and the MF P and Storage Server ar e powered on. The USB device will then show up on the MFP and Storage Server utility as a blue icon ( ). The blue icon indicates that the USB device is re ...

  • TP-Link TL-PS310U - page 12

    8 3. Once the USB device has been connected, the blue icon ( ) will turn green ( ) to indicate that the connection has been established. The USB device no w becomes available on your computer, and you can use this US B device as if it was directly connected to your computer. 2.1.2 Connecting to an USB Printer or Multi-functional Printer 1. Connect ...

  • TP-Link TL-PS310U - page 13

    9 ) Note: If your printer does not show up on the list, pl ease try to disconnect and reconnect the printer t o the USB port of the MFP and Storage Server. Also, please make sure the MFP and Storage Server and your printer are powered o n. 2. The printer will be detect ed as if it was plugged dire ctly into your computer. 3. If this printer is conn ...

  • TP-Link TL-PS310U - page 14

    10 2.1.3 Disconnecting an USB Device To disconnect an USB device, simply click on the connected USB device on the list of the MFP and Storage Server setup utility, and press the Disconnect Device button. The device will then no longer stay connected to your computer, how ev er, you may reconnect the U SB device again once the icon becomes blue ( ). ...

  • TP-Link TL-PS310U - page 15

    11 2. To send the courteous message, right-click on the USB device and select “ Request Disconnect Device ”. A message will then be sent to t he user requesting that they disconnect from the USB device. ) Note: If the occupying user denies this request, then you will not be able to send any further requests to the same user for 3 minutes. This ...

  • TP-Link TL-PS310U - page 16

    12 2.1.5 Setting the MFP and Storage Server by Setup Utility 1. To configure the MFP and Storage S erver by setup utility, right-clic k on the MFP and Storage Server and select “ Server Configurations ”. 2. A Server Setting window will be displayed. You may set the DHCP (default), IP address and password. Moreover, you can upgrade the fi rmware ...

  • TP-Link TL-PS310U - page 17

    13 2.2 For Windows 7 Users 1. Insert the setup CD into your CD-drive. The aut o-run program will be started. Select the model. 2. Choose your operati ng system to install all software programs. 3. The installation wizard will start the installa tion process. During the installation, a Windows Security message will appear. Select Install to continue ...

  • TP-Link TL-PS310U - page 18

    14 4. Click on “Finish” to comple te the installation process. 5. Once the installation process has been comple ted, a new icon will be shown on Desktop. Double-click on it for the first time execution. 2.2.1 Connecting to an USB Device 1. After you have successfully installed the MFP and Storage Se rver driver, connect the USB device to the US ...

  • TP-Link TL-PS310U - page 19

    15 2. When the USB device is connec ted, the MFP and Storage Server will detect the connection of the USB device, and an icon of t he USB device will show up. 3. Select the USB device that you want to connect to, right-click on it and select “ Connect Device ”, or click Connect Device button below to est ablish the connection. 4. You will see t ...

  • TP-Link TL-PS310U - page 20

    16 2.2.2 Setting up Auto Connection/Auto Disconnection 1. Right-click on the device that you want to set up auto connection feature. 2. From the pop-up shor tcut menu, you can: z Select the Connect this device when application starts option so that the device will be connected automatically w hen the system starts. z Select the Connect Automaticall ...

  • TP-Link TL-PS310U - page 21

    17 ...

  • TP-Link TL-PS310U - page 22

    18 Chapter 3 WEB Management Interface 3.1 For Windows 2000/XP and Windows 7 Users To Access WEB management interface in Window s 2000/XP or Windows 7, in the MFP and Storage Server setup utility, select and double-click the “ TL-PS310U-C7641B ” item, the operating system will open the browser automatically and load the management webpag e. Here ...

  • TP-Link TL-PS310U - page 23

    19 3.2 WEB Page Description Status: ¾ Server Information: Displays the server informati on of the MFP and Storage Server. ...

  • TP-Link TL-PS310U - page 24

    20 ¾ Device Information: Displays the information of the connected USB device(s). ...

  • TP-Link TL-PS310U - page 25

    21 ¾ TCP/IP: Displays the current TCP/IP setti ngs of the MFP and Storage server. Setup: ¾ Server Settings: You can add or change any existing password on the MFP and Storag e Server in this screen. By default, the MFP and St orage Server does not come with a default password. ...

  • TP-Link TL-PS310U - page 26

    22 ¾ TCP/IP: You can change the TCP/TP se ttings according to your net w ork specification. If you would like to give the MFP and Storage Server a static IP address, y ou will need to Disable DHCP in the DHCP Setting field. Once DHCP is disabled, enter the des ired IP address on the IP address field along with t he subnet mask, and then click Save ...

  • TP-Link TL-PS310U - page 27

    23 Misc: ¾ Factory Default: This screen allows you to restore the MFP and Storage Server to its factory default. Please note that if t he MFP and Storage Server has a set password, you will need to enter it into the password field. ¾ Firmware Upgrade: This screen allows you to upload t he latest firmware on the MFP and Storage Server. Click on Br ...

  • TP-Link TL-PS310U - page 28

    24 Restart: This screen allows you to reboot the MFP and Storag e Server. Please not e that if the MFP and Storage Server has a set password, you will need to enter it into the password field. ...

  • TP-Link TL-PS310U - page 29

    25 Chapter 4 Troubleshooting 4.1 Frequently Asked Questions 1. Why can’t I connect my USB device to my computer through MFP and Storage Server? z Make sure the USB device functions normally wh en you plug it into your computer via USB cable. z If the USB device, such as USB printer or mult i-functional printer, requires a driver, please make sure ...

メーカー TP-Link カテゴリー Server

TP-Link TL-PS310Uのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- TL-PS310Uの取扱説明書
- TP-Linkの製品カード
- パンフレット
- またはTP-Link TL-PS310Uの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、TP-Link TL-PS310Uの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、TP-Link TL-PS310Uの取り付け説明書、サービスマニュアル、簡易説明書、またはTP-Link TL-PS310Uのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、TP-Link TL-PS310Uの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

TP-Link TL-PS310Uデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがTP-Link TL-PS310Uを使用するのを助ける技術的文書のことです。説明書は通常、全てのTP-Link TL-PS310Uユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

TP-Linkの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. TP-Link TL-PS310Uの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははTP-Link TL-PS310Uの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。TP-Link TL-PS310Uに関してこのドキュメントで見つけることができる全てのヒントの目次
3. TP-Link TL-PS310Uデバイスの基本機能を使うにあたってのヒント。 TP-Link TL-PS310Uのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。TP-Link TL-PS310Uに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるTP-Link TL-PS310Uのメーカー/サービスへの連絡先に関する情報。

TP-Link TL-PS310Uについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもTP-Link TL-PS310Uの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがTP-Link TL-PS310Uで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)