Graco 258859の取扱説明書

24ページ 6.61 mb
ダウンロード

ページに移動 of 24

Summary
  • Graco 258859 - page 1

    3A0153E Operation Pr oShot ™ Cor dless P aint Spra y er U .S. Patent No. D625,775 S; U .S. P atent No. 6,619,569; U.S. P atent No. D630,708 S; Community Registration #0012282 55; India Patent No. 230058; T aiwan P atent No. D142952 China P atent No. ZL201030238948.3; and other patents pending - For portable spray applicati ons of water -based and ...

  • Graco 258859 - page 2

    Table of Contents 2 3A0153E T able of Contents W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Component Ident ification . . . . . . . . . . . . . . . . . . . . . . . . . 5 Common Pr ocedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Pressure Relief Procedure . . . . . . . . . . . . . . . . . ...

  • Graco 258859 - page 3

    Warnings 3A0153E 3 Wa r n i n g s The follo wing war nings are for the setup , u se, maintenance, and repair of this equipment. The exclamation point symbol aler ts y ou to a general warning and the ha zard symbols refer to procedure-sp ecific risks. When these symbols appear in the body of this manual, ref er back to these W ar nings. Product-spec ...

  • Graco 258859 - page 4

    Warnings 4 3A0153E B A TTERY HAZARD The batter y may leak, e xplode, cause b ur ns, or cause an e xplosion if mishandled. Contents of an open battery can cause se vere irritation and/or chemical burns. If on skin, wash with soap and w ater . If in ey es, flush with water f or at least 15 minutes and seek immediate medical attention. • Do not shor ...

  • Graco 258859 - page 5

    Component Identification 3A0153E 5 Component Identification *NO TE: Filter asse mbly is re verse-threaded. T ur n left (or count er-clockwise) to tighten, tur n right (or clockwise) to loosen. ti15479a D Fa E R K M C Y T S W B D P A Fa Fb G J H N Z L A ProShot Cordless P aint Spra yer B Spra yer Hook C O utlet V alve Repair Access D ProShot Spra y ...

  • Graco 258859 - page 6

    Common Procedures 6 3A0153E Common Pr ocedures Pressure Relief Pr ocedure 1. Engage tr igger lock. 2. Put prime/relief v alve UP to re lease pressure. Tr i g g e r L o c k Spra y Tip P osition Prime/Relief V a lve P osition Do not opera te or spra y near children. Do not aim the spra yer at, or spra y any person or animal. K eep han ds and other bo ...

  • Graco 258859 - page 7

    Charging the Battery 3A0153E 7 Char ging the Batter y Batteries are initially 50% charge s to provide optimum battery life and requir e charging before first use. It takes approximatel y 45 minutes to charge a dead battery to 80%, at which point it can be used.It will take approxi- mately 75 minutes to fully char ge a dead battery. 1. Slide batter ...

  • Graco 258859 - page 8

    Setup 8 3A0153E Setup Suction T ube Selection This spra yer comes with two different suction tubes . Standar d Suction T ube (sprays ceilings and walls): When spra ying walls, the inlet of the suction tube should be aimed at the fr ont of the material cup . When spra ying ceilings , the inlet of the suction tube should be aimed at th e back of the ...

  • Graco 258859 - page 9

    Setup 3A0153E 9 Spra ying Stains or Clear Coats (Fine-Finish Optimizer) The Fine-Finish Optimizer should be installed and us ed when spraying thin materi al such as stain or cle ar coats. The Fine-Finish Op timizer restricts the mat er ial flo w resulting in a finer quality finish. Installation 1. Remove material cup and suctio n tube. 2. Push Fine ...

  • Graco 258859 - page 10

    Setup 10 3A0153E Materials • When spr aying water -based materials, flush the spra yer thoroughly with water . • When spr aying non-wate r-based material s, flush the spra yer thoroughly with mineral spirits or com- patib le, oil-based flushing fluid. Star ting a New Job (o r Refilling the Cup) 1. Engage trigger lock and put prime/relief valv e ...

  • Graco 258859 - page 11

    Install Tip/ Guard Assembly (if not installed) 3A0153E 11 Install Tip/Guar d Assembl y (if not installed) Rever sible Tip Selection Chart 1. Engage trigger lock and put prime/relief valv e UP to release pressure . Then remove Tip/Guard Assemb ly . 2. Install filter to Spra y Tip/Guard Assembly (make sure filter is fully installed into spra yer). NO ...

  • Graco 258859 - page 12

    Unclogging Spray Tip/Guard Asse mbly 12 3A0153E Unc logging Spra y Tip/Guar d Assembl y 1. T o unclog tip obstr uction, en gage trig ger lock and pull relief valv e UP to release pressure. 2. Re verse spra y tip to UNCLOG position. 3. Aim spra yer at waste area, disengag e trigger lock, and put prime/relief v alve DO WN to spra y positio n. Pull tr ...

  • Graco 258859 - page 13

    Shutdown and Cleaning 3A0153E 13 Shutdo wn and Cleaning Flushing Spra yer 1. Engage trigger lock and pull relief v alve UP to release pressure . 2. Remo ve material cup and pr oper ly dispose cup liner or e xcess material. 3. Remo ve and clean sp ray er intak e tube and screen with wat er (or flushing fluid) and a brush e v er y time you flush the ...

  • Graco 258859 - page 14

    Shutdown and Cleaning 14 3A0153E 6. Disconnect trigger loc k and trigger spra yer f or appro ximately 15 se conds. Engage trigger loc k. 7. Discard contaminated fluid and refill with appropr i- ate flushing fluid. 8. Disengage trigger loc k, re verse tip to UNCLOG position, and pull trigger f or 5 seconds to prime spra yer . 9. Put prime/relief val ...

  • Graco 258859 - page 15

    Storage 3A0153E 15 Cleaning Spra yer Exterior • Wipe paint off out side of spra yer using a soft cloth moistened with w ater or flushing fluid. Do NO T submerge the spra yer . Tips • Tips will require replac ement depending on abrasiveness of paint. • Do no t spray with w or n tip . See T roubleshoot ing , page 20. Storage 1. Dilute 4 oz. bot ...

  • Graco 258859 - page 16

    Replacement Parts and Kits 16 3A0153E Replacement P ar ts and Kits 1 8 11 6 5 4 3 7 12 16 ti15497a 2 15 14 17 9 10 18 20 19 21 22 23 24 ti16473c 13a 13 13a 13 Ref. P ar t Description 1 262367 Spra yer , repla cement (no tip , batter y , suction tube, or ma terial cu p) 2 16D562 Liner , replacement (10 pack) 3 24F045 Fine Finish Opti mizer (with Cle ...

  • Graco 258859 - page 17

    ProShot Repair Kit 3A0153E 17 Pr oShot Repair Kit Outlet V alve Fitting NO TE: Before doing any repair to pump, perf or m Flushing Spra yer procedure, pa ge 13. Re m ova l 1. Engage trigger lock and pull relief v alve UP to release pressure . 2. Remove battery . 3. Remove pump outlet cap . 4. Use tool (sup plied) to loosen and remov e outlet valv e ...

  • Graco 258859 - page 18

    Alternate Priming Method 18 3A0153E Alternate Priming Method 1. Engage tr igger lock and put pr ime/re lief valv e UP to release pressure . 2. Remov e material cup and f ill with flushing mater ial. 3. With spray er in pr ime mode, tur n spray er upside-down, remov e strainer and slowly pour flush- ing mater ial into the in take tube until full. 4. ...

  • Graco 258859 - page 19

    Alternate Priming Method 3A0153E 19 Inlet V alve Cleaning Re m ova l 1. Engage trigger lock and pull relief v alve UP to release pressure . 2. Remov e material cup and suction tube. 3. Hold spr ay er upside-down and use wrench or sock et to loosen and re move inlet fitti ng, inlet valv e, and spring. NO TE: Make sure the spring also comes out. U se ...

  • Graco 258859 - page 20

    Troubleshooti ng 20 3A0153E T roub leshooting Chec k ev er ything in this T roub leshooting T ab le before you br ing the spra y er to an authorized service center . Prob lem Cause Solution ProShot makes no sound when trigger is pulled T rigger is locked. Disengage trigger lock. See page 6. Status Indicator Light is solid RED when trigger ing, indi ...

  • Graco 258859 - page 21

    Troubleshooting 3A0153E 21 Spra y Pattern Dia gnostics ProShot spra ys with poor results Tip is par tially clogged See Unclog ging Tip/Guard Assembly , page 12. Tip is not in correct position Rotate tip to SPRA Y position. Incorrect tip f or application of material. See Rever sible Tip Selection Chart, page 11. Tip filter is par tially clogged Clea ...

  • Graco 258859 - page 22

    Troubleshooti ng 22 3A0153E Spra y patter n is too narrow: Spray er is too close to target surface . Incorrect tip for appli cation of material . Tip is worn or damaged . Mov e spray er awa y from surface (10 in). See Reversible Tip Selection Chart, page 11. Replace tip. See Install Ti p/Guard Assemb ly , page 11. Spra y pattern is too wide: Spray ...

  • Graco 258859 - page 23

    Technical Data 3A0153E 23 Te c h n i c a l D a t a Sprayer: 258865 258859 Maximum working pressure 2000 psi (137.8 bar , 13.7 MP a) W eight 6.32 lb (2.87 kg) Dimensions: Length 13.25 in. (33.6 cm) Width 5.0 in. (12.7 cm) Height 10.375 in. (26.4 cm) Storage temperature r ange ◆❖ 32° to 122°F (0° to 50°C) Operating temperature r ange ✔ 40° ...

  • Graco 258859 - page 24

    All written and visual data contained in this document reflects the latest product information available at the time of publica tion. Graco reserves the right to make changes a t any time without notice. Original instructions. T his manual contains English. MM 3A0153 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Kore ...

メーカー Graco カテゴリー Paint Sprayer

Graco 258859のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 258859の取扱説明書
- Gracoの製品カード
- パンフレット
- またはGraco 258859の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Graco 258859の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Graco 258859の取り付け説明書、サービスマニュアル、簡易説明書、またはGraco 258859のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Graco 258859の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Graco 258859デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがGraco 258859を使用するのを助ける技術的文書のことです。説明書は通常、全てのGraco 258859ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Gracoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Graco 258859の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははGraco 258859の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Graco 258859に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Graco 258859デバイスの基本機能を使うにあたってのヒント。 Graco 258859のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Graco 258859に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるGraco 258859のメーカー/サービスへの連絡先に関する情報。

Graco 258859についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもGraco 258859の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがGraco 258859で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)