Jonsered BC2043の取扱説明書

32ページ 2.38 mb
ダウンロード

ページに移動 of 32

Summary
  • Jonsered BC2043 - page 1

    Oper ator ′ s manual Please read the oper ator’ s manual carefully and make sure y ou understand the instructions before using the machine . ...

  • Jonsered BC2043 - page 2

    2 – English KEY T O SYMBOLS Symbols W ARNING! A clearing saw , brushcutter or trimmer can be dangerous if used incorrectly or carelessly , and can cause serious or fatal injury to the operator or others. It is extremely impor tant that you read and understand the contents of this operator’ s manual. Please read the operator’ s manual carefull ...

  • Jonsered BC2043 - page 3

    English – 3 CONTENTS Contents Note the f ollowing bef ore starting: Please read the oper ator’ s manual carefully . KEY T O SYMBOLS Symbols ....................................................................... 2 CONTENTS Contents ...................................................................... 3 Note the f ollowing bef ore star ting: .. ...

  • Jonsered BC2043 - page 4

    4 – English INTR ODUCTION Dear Customer , Cong ratulations on y our choice to buy a Jonsered product! W e are convinced that you will appreciate with g reat satisfaction the quality and perf ormance of our product for a v er y long time to come. The purchase of one of our products giv es you access to prof essional help with repairs and service w ...

  • Jonsered BC2043 - page 5

    English – 5 WHA T IS WHA T? What is what? 1 13 19 20 18 17 2 7 10 9 8 11 14 16 3 12 15 6 4 5 31 22 21 23 24 25 26 27 28 29 30 5 4 32 1 T rimmer head 2 Be vel gear 3 Grease filler cap , bev el gear 4 Cord cutter 5 Cutting attachment guard 6 Guard e xtension 7 Shaft 8 Handle adjustment 9 Throttle control 10 Stop s witch 11 Star t throttle button 1 ...

  • Jonsered BC2043 - page 6

    6 – English GENERAL SAFETY PRECA UTIONS Impor tant P ersonal pr otective equipment HELMET A protectiv e helmet where there is a risk of falling objects HEARING PRO TECTION W ear hear ing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approv ed ey e protection. If y ou use a visor then you m ust also wear approv ed ...

  • Jonsered BC2043 - page 7

    English – 7 GENERAL SAFETY PRECA UTIONS Mac hine ′ s safety equipment This section descr ibes the machine ′ s saf ety equipment, its pur pose, and ho w checks and maintenance should be carried out to ensure that it operates correctly . See the ”What is what?” section to locate where this equipment is positioned on your machine . The lif e ...

  • Jonsered BC2043 - page 8

    8 – English GENERAL SAFETY PRECA UTIONS Alw a ys use the recommended guard for the cutting attachment you are using. See chapter on T echnical data. Vibration damping system Y our machine is equipped with a vibration damping system that is designed to minimize vibration and mak e operation easier . Using incorrectly wound cord or a b lunt or inco ...

  • Jonsered BC2043 - page 9

    English – 9 GENERAL SAFETY PRECA UTIONS Regularly check that the muffler is securely attached to the machine. If the muffler on y our machine is fitted with a spar k arrestor mesh this must be cleaned regularly . A b locked mesh will cause the engine to ov erheat and may lead to serious damage. Loc king nut A locking n ut is used to secure som ...

  • Jonsered BC2043 - page 10

    10 – English GENERAL SAFETY PRECA UTIONS K eep the teeth of the blade correctly sharpened! Follo w our instructions and use the recommended file gauge. An incorrectly shar pened or damaged blade increases the risk of accidents. Check the cutting attachment f or damage or crac ks. A damaged cutting attachment should alwa ys be replaced. Sharpenin ...

  • Jonsered BC2043 - page 11

    English – 11 ASSEMBL Y Fitting the main bod y Connect the engine (A) to the tube (B) with f our screws (C). Fitting the handlebar • Fit the handlebar in the handlebar clamp on the shaft using six screws . • Attach the cabling to the shaft with tw o cabling holders. • Put on the harness and hang the machine from the suppor t hook. Now mak e ...

  • Jonsered BC2043 - page 12

    12 – English ASSEMBL Y 9 Lap and fix the stop s witch wires and connectors with clamp (I). 10 Refit the air filter cov er . Assembling the cutting equipment Fitting the cor d cutter and guard e xtension to the trimmer guard • Attach the cord cutter to the guard e xtension with screw and washer as sho wn. • Fit the guard e xtension to the t ...

  • Jonsered BC2043 - page 13

    English – 13 ASSEMBL Y Fitting other guar ds and cutting attachments • Fit the guard (A) to the gear housing using the suppor t plate (M) and two scre ws (L). • Fit the drive disc (B) on the output shaft. • T ur n the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing. • Inser t the ...

  • Jonsered BC2043 - page 14

    14 – English FUEL HANDLING Fuel safety Ne ver star t the machine: 1 If you ha ve spilt fuel on it. Wipe off the spillage and allo w remaining fuel to e vaporate . 2 If you ha ve spilt fuel on y ourself or your clothes , change your clothes . W ash any part of your body that has come in contact with fuel. Use soap and w ater . 3 If the machine is ...

  • Jonsered BC2043 - page 15

    English – 15 FUEL HANDLING Mixing • Alwa ys mix the petrol and oil in a clean container intended f or fuel. • Alwa ys star t by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol. • Mix (shake) the fuel mixture thoroughly bef ore filling the ...

  • Jonsered BC2043 - page 16

    16 – English ST AR TING AND ST OPPING Chec k before starting • Check the b lade to ensure that no cracks ha ve f ormed at the bottom of the teeth or by the centre hole . The most common reason wh y cracks are f ormed is that shar p corners have been f ormed at the bottom of the teeth while shar pening or that the blade has been used with dull t ...

  • Jonsered BC2043 - page 17

    English – 17 ST AR TING AND ST OPPING W arm engine Use the same star ting procedure as for a cold engine b ut without setting the choke control in the chok e position. Hold the body of the machine on the ground using y our left hand (CA UTION! Not with your f oot!). Grip the star ter handle, slowly pull out the cord with y our right hand until yo ...

  • Jonsered BC2043 - page 18

    18 – English W ORKING TECHNIQ UES General w orking instructions Basic safety rules 1 Look around you: • T o ensure that people, animals or other things cannot aff ect your control of the machine. • T o ensure that people, animals, etc., do not come into contact with the cutting attachment or loose objects that are thrown out b y the cutting a ...

  • Jonsered BC2043 - page 19

    English – 19 W ORKING TECHNIQ UES Grass c learing using a grass blade • Grass b lades and grass cutters must not be used on woody stems. • A grass b lade is used for all types of tall or coarse g rass. • The grass is cut do wn with a sidewa ys, s winging mov ement, where the mov ement from right-to-left is the clearing stroke and the mov em ...

  • Jonsered BC2043 - page 20

    20 – English W ORKING TECHNIQ UES Sweeping • The f an effect of the rotating cord can be used f or quick and easy clearing up. Hold the cord parallel to and abov e the area to be s wept and mov e the tool to and fro . • When cutting and s weeping you should use full throttle to obtain the best results. ...

  • Jonsered BC2043 - page 21

    English – 21 MAINTENANCE Carb urettor Adjusting the idle speed (T) Check that the air filter is clean. When the idle speed is correct, the cutting attachment should not rotate. If adjustment is required, close (turn clockwise) the idle adjustment screw T , with the engine running, until the cutting attachment star ts to rotate. Open (turn anticl ...

  • Jonsered BC2043 - page 22

    22 – English MAINTENANCE • Excessive fuel consumption. Clean the filter e very 25 hours, or more regularly if conditions are e xceptionally dusty . Cleaning the air filter Remov e the air filter cov er and take out the filter . W ash it clean in warm, soapy w ater . Ensure that the filter is dry before refitting it. An air filter that ha ...

  • Jonsered BC2043 - page 23

    English – 23 MAINTENANCE Maintenance sc hedule The f ollowing is a list of the maintenance that must be perf or med on the machine. Most of the items are descr ibed in the Maintenance section. The user m ust only carr y out the maintenance and ser vice work described in this Operator’ s Manual. More e xtensive work must be carried out by an aut ...

  • Jonsered BC2043 - page 24

    24 – English TECHNICAL D A T A T echnical data Note 1: Noise emissions in the environment measured as sound po wer (L W A ) in conf ormity with EC directive 2000/14/EC . Repor ted sound power le v el for the machine has been measured with the original cutting attachment that giv es the highest lev el. The diff erence between guaranteed and measur ...

  • Jonsered BC2043 - page 25

    English – 25 TECHNICAL D A T A EC-dec laration of conformity (Applies to Eur ope onl y) W e, Husqv arna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters Jonsered BC2043 and BC2053 with serial numbers dating from 2009 onwards (the y ear is clearly stated on the rating plate, f ollowed b y the serial number), comp ...

  • Jonsered BC2043 - page 26

    1 Poly T rim 2 3 4 5 6 7 8 <20mm >20mm ! B A 6 Nm X 10 ...

  • Jonsered BC2043 - page 27

    T ap n’ Go 35 Spin "Clic" 1 2 3 5 6 7 9 8,5 m 28' 4 8 4,3 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm ...

  • Jonsered BC2043 - page 28

    "Clic" 1 2 3 5 6 7 9 10 m 32' 4 8 4,3 m 14' 2,7-3,3 mm .106-.13" 10 cm 4" 6" 15 cm T ap n’Go 45 Spin ...

  • Jonsered BC2043 - page 29

    A 2,7 - 4,0 mm / .105 - .160" B 8 m / 26’ C 15 cm / 5.9" 1 2 3 5 6 7 9 4 8 6" 15 cm B C A T ap n’Go 55 Spin "Clic" ...

  • Jonsered BC2043 - page 30

    1 2 3 4 5 6 7 8 9 35-50 NM ~ 15 cm 6' "Clic" ~ 3,5 m 11 ' 7,0 m 23' 2,4-3,3 mm .095"-.130" 12 cm 5" T rimmy SII ...

  • Jonsered BC2043 - page 31

    ...

  • Jonsered BC2043 - page 32

    ´®z+TbT¶6v¨ 2009-11-06 ´®z+TbT¶6v¨ 1152665-26 ...

メーカー Jonsered カテゴリー Brush Cutter

Jonsered BC2043のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- BC2043の取扱説明書
- Jonseredの製品カード
- パンフレット
- またはJonsered BC2043の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Jonsered BC2043の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Jonsered BC2043の取り付け説明書、サービスマニュアル、簡易説明書、またはJonsered BC2043のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Jonsered BC2043の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Jonsered BC2043デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJonsered BC2043を使用するのを助ける技術的文書のことです。説明書は通常、全てのJonsered BC2043ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Jonseredの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Jonsered BC2043の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJonsered BC2043の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Jonsered BC2043に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Jonsered BC2043デバイスの基本機能を使うにあたってのヒント。 Jonsered BC2043のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Jonsered BC2043に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJonsered BC2043のメーカー/サービスへの連絡先に関する情報。

Jonsered BC2043についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもJonsered BC2043の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJonsered BC2043で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)