NETGEAR NMS100の取扱説明書

69ページ 1.51 mb
ダウンロード

ページに移動 of 69

Summary
  • NETGEAR NMS100 - page 1

    September 2004 202-100 58-01 202-10058-01 September 2004 NETGEAR , Inc. 4500 Great America Parkway Santa Clara, CA 95 054 USA Reference Manual for the ProSafe Network Management System NMS100 ...

  • NETGEAR NMS100 - page 2

    ii September 2004 202-100 58-01 © 2004 by NETGEAR, Inc. All ri ghts reserved. September 2004. T rademarks NETGEAR is a trademark of Netge ar , Inc. SNMPc, SNMPc W orkgroup, SNMPc Enterp rise, and Castle Rock Computing are trademarks of Castle Rock Computing. Air Messenger Pro is a trad emark of Internet Software Solutions . Microsoft, W i ndows, a ...

  • NETGEAR NMS100 - page 3

    Contents i July 2004 202-10036-01 Content s Chapter 1 Introduction Audience, Scope, Conventions, and Formats . ......... ................. ................ ............. ........ 2-1 Overview ............. ................ ................ ................ ................ ................ ................ ......... ... 2-2 Other ProSafe NMS Featur ...

  • NETGEAR NMS100 - page 4

    July 2004 20 2-10036-01 ii Contents Chapter 3 Dat a and St atistics Working with the Map Database ............................ ................ ................. ................ ........ 4-1 The Map Selection T ree .. ............. ................ ................ ................ ................ ............ 4-1 Using Map View Windows .. ...... ...

  • NETGEAR NMS100 - page 5

    Contents iii July 2004 202-10036-01 TCP Service Polling .................. ................ ................ ................ ............. ................ .. 5-4 Custom TCP Service Polling .................. ................ ................ ................ ................ .. 5-5 Managing Polling for the Device .. ... ... .... ... ... ... ... . ...

  • NETGEAR NMS100 - page 6

    July 2004 20 2-10036-01 iv Contents ...

  • NETGEAR NMS100 - page 7

    Introduction 1-1 September 2004 202-1005 8-01 Chapter 1 Introduction Audience, Scope, Conventions, and Format s This reference manual assumes that the reader h as basic to interme diate computer and Internet skills. This guide uses the follo wing typographical conventions: This guide uses the following format to highlight special messages: This man ...

  • NETGEAR NMS100 - page 8

    Reference Manual for the ProSafe Network Manag ement System NMS100 1-2 Introduction September 2004 202-10058-01 Overview ProSafe NMS uses the popular SNMP management protocol to poll and configure devices, workstations, and servers over IP networks. Al ong with all the features expected in any SNMP management statio n, ProSafe NMS al so includes th ...

  • NETGEAR NMS100 - page 9

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Introduction 1-3 September 2004 202-1005 8-01 • Alarm box event action • Event forwarding • Running external programs • Automatic Icon and Program selection • Programming interfaces ProSafe Network Management System This is a single user version for managi ng sma ll to m ...

  • NETGEAR NMS100 - page 10

    Reference Manual for the ProSafe Network Manag ement System NMS100 1-4 Introduction September 2004 202-10058-01 None (TCP Only) Null access is used for polling TCP services on ly , where ICMP (Ping) and SNMP access is restricted by a firewall. ICMP (Ping) ICMP (Ping) mode is used fo r devices that do not support SNMP but can sti ll be pinged to see ...

  • NETGEAR NMS100 - page 11

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Introduction 1-5 September 2004 202-1005 8-01 ...

  • NETGEAR NMS100 - page 12

    Reference Manual for the ProSafe Network Manag ement System NMS100 1-6 Introduction September 2004 202-10058-01 ...

  • NETGEAR NMS100 - page 13

    Installation and Startup 2-1 September 2004 202-1005 8-01 Chapter 2 Inst allation and St artup Inst alling the ProSafe NMS Server and Local Console 1. Log on to W in do ws with administrator permission. 2. Insert the ProSafe NMS CD into the computer CD drive. 3. Use the W indows Start/Ru n menu and enter d:NMSsetup , where d: is the CD drive. The ...

  • NETGEAR NMS100 - page 14

    Reference Manual for the ProSafe Network Manag ement System NMS100 2-2 Installation and Startup September 2004 202-10058-01 Inst alling the Air Messenger Pro Paging Software ProSafe NMS includes a copy of the Air Messenger Pro paging application. This softwa re is required if you want ProSafe NMS to p age you when an event occurs. Air M essenger Pr ...

  • NETGEAR NMS100 - page 15

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Installation and Startup 2-3 September 2004 202-1005 8-01 Disabling Automatic Console Login T o disable automatic console startup and login, go to the W indows Start menu and use the Programs/NETGEAR ProSafe NMS/Configure T asks me nu. Disable the Auto Login Us er check box and cl ...

  • NETGEAR NMS100 - page 16

    Reference Manual for the ProSafe Network Manag ement System NMS100 2-4 Installation and Startup September 2004 202-10058-01 Console Element s The following figure an d table show the ma in elements of the ProSafe NMS console. Figure 2-1: Console element s Element Functio n Main Button Bar Buttons and controls to execute common commands quickly . Ed ...

  • NETGEAR NMS100 - page 17

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Installation and Startup 2-5 September 2004 202-1005 8-01 Console Button Commands The following diagrams show the function of each button in the Main button bar and Edit button bar . Each of these buttons has a corresp onding main menu item. Figure 2-2: Main butt on bar Edit Butto ...

  • NETGEAR NMS100 - page 18

    Reference Manual for the ProSafe Network Manag ement System NMS100 2-6 Installation and Startup September 2004 202-10058-01 Selection T ool If you do not see the selection tool, use the V iew/S electio n T ool menu to s how it. Use the Selection T ool to manipulate objects from one of several data bases. Use the drag control at the right of the Sel ...

  • NETGEAR NMS100 - page 19

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Installation and Startup 2-7 September 2004 202-1005 8-01 • T o remove one or more events, se lect the event and press the Delete key . • T o ac knowledge (remove cu rrent status of) an ev ent, select the event and use the right-click Acknowledge menu. • T o completely clear ...

  • NETGEAR NMS100 - page 20

    Reference Manual for the ProSafe Network Manag ement System NMS100 2-8 Installation and Startup September 2004 202-10058-01 ...

  • NETGEAR NMS100 - page 21

    Data and Statistics 3-1 September 2004 202-1005 8-01 Chapter 3 Dat a and St atistics W orking with the Map Dat abase The Map Selection T ree Locate the Selection T ool on the right side of th e console. If you do not see the Selection T ool, use the V iew/Selection T ool menu to show it. Select the first tab marked Map. The displayed Map Selection ...

  • NETGEAR NMS100 - page 22

    Reference Manual for the ProSafe Network Manag ement System NMS100 3-2 Data and Statistics September 2004 202-10058-01 Using Map V iew Windows Map V iew windows are overlapp ing windows that are displa yed in the V iew W indow area of ProSafe NMS. This is where you can se e the ma p topology as a diagram an d easily manipulate the map objects (add, ...

  • NETGEAR NMS100 - page 23

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Data and Statistics 3-3 September 2004 202-1005 8-01 • Use the V iew All button to toggle the V iew All st ate for a s elected map view . In this state, the view contents are automatically zo omed so that all icons are visibl e. As you change the size of the V iew window , the c ...

  • NETGEAR NMS100 - page 24

    Reference Manual for the ProSafe Network Manag ement System NMS100 3-4 Data and Statistics September 2004 202-10058-01 T o move objects at the top level, select one or mo re objects in a Map view and drag the mouse. The selected objects are moved to the new mouse location. The following illustrati on shows an automatically (left) and manually (ri g ...

  • NETGEAR NMS100 - page 25

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Data and Statistics 3-5 September 2004 202-1005 8-01 Y ou can also disconnect objects from the Bus Netw ork by deleting the att aching link. Then the detached object can be moved anywhere in the view . The following figu re shows a Map view of an automatically arranged subnet leve ...

  • NETGEAR NMS100 - page 26

    Reference Manual for the ProSafe Network Manag ement System NMS100 3-6 Data and Statistics September 2004 202-10058-01 Changing Object Properties Attributes 1. Use the Edit/Properties menu to change the attributes of one or more selected objects. T o edit multiple objects, all select ed objects must be of the same type such as subnet or device. 2. ...

  • NETGEAR NMS100 - page 27

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Data and Statistics 3-7 September 2004 202-1005 8-01 Access Parameters 1. Select the Access tab to set access parameters for a Device, Link, or Network object. For a description of access parameters, please see Ta b l e 3 - 1 Object Properties Access tab. 2. T o change an ac cess ...

  • NETGEAR NMS100 - page 28

    Reference Manual for the ProSafe Network Manag ement System NMS100 3-8 Data and Statistics September 2004 202-10058-01 T ype-Dependent Attributes 1. Select the Attribute ta b to set type-dependent attributes. For a complete description of all type- dependent object attributes, plea se see Ta b l e 3 - 2 Object Properties Attribute tab. 2. T o chang ...

  • NETGEAR NMS100 - page 29

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Data and Statistics 3-9 September 2004 202-1005 8-01 The following table lists each available attribute in the Object Properties Attributes tab, the object types it is valid for , and a description of the attribute. T able 3-2. Object Proper ties Attribute t ab Object Ty p e a a. ...

  • NETGEAR NMS100 - page 30

    Reference Manual for the ProSafe Network Manag ement System NMS100 3-10 Data and Statistics September 2004 202-10058-01 Adding Map Object s ProSafe NMS supports several object types, incl uding subnets, devices, links, and networks. T o add objects, first open a Map view window an d then use on e of the Insert/Map Object menus or the Edit button ba ...

  • NETGEAR NMS100 - page 31

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Data and Statistics 3-11 September 2004 202-1005 8-01 V iewing Device MIB Dat a The MIB Selection T ree 1. Select one or more SNM P Device objects. 2. Locate the Selection T ool at the left of the console window . If you do not see it, use the V iew/Se lection T ool menu to show i ...

  • NETGEAR NMS100 - page 32

    Reference Manual for the ProSafe Network Manag ement System NMS100 3-12 Data and Statistics September 2004 202-10058-01 Custom Menus The Manage menus are actually built-in custom menus from an external configuration file. Y ou can also add custom menus to display particular ta bles. For example, if you have only a few device types in your network y ...

  • NETGEAR NMS100 - page 33

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Data and Statistics 3-13 September 2004 202-1005 8-01 Graph Display Element s The following figure shows a samp le graph di splay and the function of graph controls. Figure 3-4: Graph displa y and graph controls Graph Styles In the following figure there are four graph styles: Lin ...

  • NETGEAR NMS100 - page 34

    Reference Manual for the ProSafe Network Manag ement System NMS100 3-14 Data and Statistics September 2004 202-10058-01 Graph Page Controls The graph is dif ficult to view with many variab les at the same time. Use the Page Controls to enable blocks of variables. Use the Pagina te button (paper sheet icon) to enable all variables or just the first ...

  • NETGEAR NMS100 - page 35

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Data and Statistics 3-15 September 2004 202-1005 8-01 3. Select the T rend tab and open the Trend Reports Group name. 4. Use the right-click Insert Repo rt menu to add a new report. 5. Enter a name for the new report. 6. Select one of the built-in table names from th e MIB T able ...

  • NETGEAR NMS100 - page 36

    Reference Manual for the ProSafe Network Manag ement System NMS100 3-16 Data and Statistics September 2004 202-10058-01 Irrespective of the report poll interval, all Counte r variables shown in a trend report graph window are normalized to per-second values . Limiting Saved Instances The polling agent normally polls all available instances for each ...

  • NETGEAR NMS100 - page 37

    Polling and Emailing 4-1 September 2004 202-1005 8-01 Chapter 4 Polling and Emailing Setting Threshold Alarms Y ou can generate a Threshold Alarm when a po lle d SNMP variable value meets certain criteria. ProSafe NMS supports three distinc t mechanisms for generating Threshold Alarms as described in the following table. T able 4-1. Threshold Alarm ...

  • NETGEAR NMS100 - page 38

    Reference Manual for the ProSafe Network Manag ement System NMS100 4-2 Polling and Emailing September 2004 202-10058-01 Setting St atus V ariable Polling • Using the Map Selection T ree or a Map V iew window , right-click on an SNMP Device, Link, or Network object and use the Properties menu. • Make sure the Address field is set to a valid IP a ...

  • NETGEAR NMS100 - page 39

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Polling and Emailing 4-3 September 2004 202-1005 8-01 Setting Manual Threshold Alarms Y ou must firs t create a trend report for a set of devices and an SNMP MIB T able. Ple ase refer to Saving Long-term Statistics for a description of creating trend reports. Select the report nam ...

  • NETGEAR NMS100 - page 40

    Reference Manual for the ProSafe Network Manag ement System NMS100 4-4 Polling and Emailing September 2004 202-10058-01 Polling TCP Application Services ProSafe NMS supports customized polling of any TCP application service and simplified poll ing of four built-in TCP application services (FTP , SMTP , W eb, and T elnet). Discovery of Four Built-in ...

  • NETGEAR NMS100 - page 41

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Polling and Emailing 4-5 September 2004 202-1005 8-01 Custom TCP Service Polling Custom TCP Service definitions allow more flexible and powerful polling of your application servers. • Y ou can optionally send a text string to th e TCP service and compare the reply to a text patt ...

  • NETGEAR NMS100 - page 42

    Reference Manual for the ProSafe Network Manag ement System NMS100 4-6 Polling and Emailing September 2004 202-10058-01 4. After adding a new service definition, you need to click the Add>> bu tton if you want this service to be polled for the currently selected device. T o delete an existing Cu stom TCP Service definition: 1. Select the serv ...

  • NETGEAR NMS100 - page 43

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Polling and Emailing 4-7 September 2004 202-1005 8-01 2. Then, set the Email/Pagi ng global event options a. Use the Config/Event Options menu. b. Set the SMTP Server Address to the IP Add ress of your email server in dot notation (a.b.c.d). c. Set the Email From Address to an ema ...

  • NETGEAR NMS100 - page 44

    Reference Manual for the ProSafe Network Manag ement System NMS100 4-8 Polling and Emailing September 2004 202-10058-01 4. Add an Event Filter for the pollDeviceDown event a. Locate the ProSafe NMS Selection T ool at the left side of the console. If it is not there, use the V iew/ Selection T ool to show it. b. Select the Event tab on the Selection ...

  • NETGEAR NMS100 - page 45

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Polling and Emailing 4-9 September 2004 202-1005 8-01 6. Then, set the Email/Page event action s a. Select the Actions tab of the displayed Add Event Filter dialog. b. Select Default from the Page Group pull-down to send a page to all users with a Group1 or Group2 alias set to Def ...

  • NETGEAR NMS100 - page 46

    Reference Manual for the ProSafe Network Manag ement System NMS100 4-10 Polling and Emailing September 2004 202-10058-01 Other Event T ypes The pollDeviceDown event is an example used in this section. The mechanism is the same for other types of events, inclu ding those generated fo r Status V ariable and Manual Threshold Alarms. The following tabl ...

  • NETGEAR NMS100 - page 47

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Polling and Emailing 4-11 September 2004 202-1005 8-01 Note: A poll sequence occurs repeatedly every P OLL I NTERVAL seconds. During each poll sequence, a poll is se nt and a reply expected within the P OLL T IMEOUT period. If no response is received during the timeout period , th ...

  • NETGEAR NMS100 - page 48

    Reference Manual for the ProSafe Network Manag ement System NMS100 4-12 Polling and Emailing September 2004 202-10058-01 3. Then, add an Event Filter for the selected devices a. Add a new event filter for a set of devi ces as described i n Steps 4 through 7 of “Emailing or Paging the Administrator on an Event” on page 5-6 . b. In the Action tab ...

  • NETGEAR NMS100 - page 49

    Troubleshooting and Advanced Config uration 5-1 September 2004 202-1005 8-01 Chapter 5 T roubleshooting and Advanced Configuration T roubleshooting Network Discovery Duration of Network Discovery During the ProSafe NM S Server installation you entered the address, ne tmask, and community name for one SNMP V1 discovery seed device. This is normally ...

  • NETGEAR NMS100 - page 50

    Reference Manual for the ProSafe Network Manag ement System NMS100 5-2 Troubleshooting and Advanced Co nfiguration September 2004 202-10058-01 The figure below shows a sample top-level and su bnet Map view for a small network. Note that some devices have vendor -specific icons while ot hers have generic icons. Each gen eric device icon is marked as ...

  • NETGEAR NMS100 - page 51

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Troubleshooting and Advanced Con figuration 5-3 September 2004 202-1005 8-01 Discovery Agent Fails to Connect to the Server Look at the Current tab of th e Event Lo g T ool. If you do not see the Event L og T ool, use the V iew/ Event Log T ool to show it. Scroll to the top of the ...

  • NETGEAR NMS100 - page 52

    Reference Manual for the ProSafe Network Manag ement System NMS100 5-4 Troubleshooting and Advanced Co nfiguration September 2004 202-10058-01 SNMP Device Access Control List Many SNMP devices have an Ac cess Control List (ACL). An ACL is a list of IP addresses from which the device accepts SNMP requests. This is a vendor -speci fic security featur ...

  • NETGEAR NMS100 - page 53

    Reference M anual for the ProSafe Network Man agement Syste m NMS100 Troubleshooting and Advanced Con figuration 5-5 September 2004 202-1005 8-01 Broadcast Packet Losses In many cases network discovery mostly works but you do not see as many devices as you expect. As many devices are not represented in SNMP ARP tables they can only be discovered wi ...

  • NETGEAR NMS100 - page 54

    Reference Manual for the ProSafe Network Manag ement System NMS100 5-6 Troubleshooting and Advanced Co nfiguration September 2004 202-10058-01 7. Use the File/Reset menu to delete the current map and restart discover y with the new filters. S topping Discover y Auto-Layout Left unattended, discovery con stan tly rearranges your top -level map as ne ...

  • NETGEAR NMS100 - page 55

    A-1 September 2004 202-1003 6-01 Appendix A Event Parameters Use Event Parameters in Event Ac tion Filters to substit ute informa tion related to a specific event. Event Parameters can be used in the Event Message and as arguments to a program in the Exec Program action. The available Event Paramete rs an d the associa ted expansion are described i ...

  • NETGEAR NMS100 - page 56

    Reference Manual for the ProSafe Network Manag ement System NMS1000 A-2 September 2004 202-10036-01 $S The Set Community na me of the target device. $E The timeout attribute, in seconds, of the target device $Y The max retries for the target device $P The name of the map parent subnet object $C The number of variable s in the event trap. $* All var ...

  • NETGEAR NMS100 - page 57

    September 2004 202 -10 036-01 Glossary 1 Glossary Use the list below to find definitions for technical terms used in this manual. List of Glossary T erms 10BASE-T IEEE 802.3 specification for 10 Mbps Ethernet over twisted pair wiring. 100BASE-Tx IEEE 802.3 specification for 100 Mbps Ethernet over twisted pair wiring. 802.1x 802.1x defines port-base ...

  • NETGEAR NMS100 - page 58

    Reference Manual for the ProSafe Network Manag ement System NMS1000 2 Glossary September 2004 202 -10 036-01 ADSL requires a special ADSL modem. ADSL is grow ing in popularity as more areas around the world gain access. AES Advanced Encryption Standard, a symmetric 128-bit bl ock data en cryption tech nique. It is an iterated block cipher with a va ...

  • NETGEAR NMS100 - page 59

    Reference Manual for the Pro S afe Network Management System NM S1 000 Glossary 3 September 2004 202 -10 036-01 The DMZ sits between the Internet and an internal ne twork's line of defense, usually some combination of firewalls and bastion hosts. T ypically , the DMZ contains devices accessible to Internet traffic, such as W eb (HTTP) servers, ...

  • NETGEAR NMS100 - page 60

    Reference Manual for the ProSafe Network Manag ement System NMS1000 4 Glossary September 2004 202 -10 036-01 transmits that identity to an authenticat ion server su ch as RADIUS. The server asks the AP fo r proof of identity , which the AP gets from the user and then send s back to the server to complete the authentication. EAP is defined by RFC 22 ...

  • NETGEAR NMS100 - page 61

    Reference Manual for the Pro S afe Network Management System NM S1 000 Glossary 5 September 2004 202 -10 036-01 LDAP A set of protocols for accessing information directories. Lightweight Directory Access Protocol LDAP . A set of protocols for acce ssing information directories. LDAP is based on the standards contained within the X.500 standard, but ...

  • NETGEAR NMS100 - page 62

    Reference Manual for the ProSafe Network Manag ement System NMS1000 6 Glossary September 2004 202 -10 036-01 MTU The size in bytes of the largest pack et that can be sent or received. NA T A technique by which several hosts share a si ngle IP address for access to the Internet. NetBIOS The Network Basic Input Output System is an appli cation progra ...

  • NETGEAR NMS100 - page 63

    Reference Manual for the Pro S afe Network Management System NM S1 000 Glossary 7 September 2004 202 -10 036-01 PPPoE PPPoE. PPP over Ether net is a prot ocol for connecting remot e hosts to the Internet over an always-on connection by simulati ng a dial-up conn ectio n. PPP over A TM PPPoA. PPP over A TM is a protocol for connectin g remote hosts ...

  • NETGEAR NMS100 - page 64

    Reference Manual for the ProSafe Network Manag ement System NMS1000 8 Glossary September 2004 202 -10 036-01 SSID A Service Set Identification is a thirty-two charact er (maximum) alphanumeric key identifying a wireless local area network. For the wireless devices in a netw ork to communicate with each other , all devices must be configured with th ...

  • NETGEAR NMS100 - page 65

    Reference Manual for the Pro S afe Network Management System NM S1 000 Glossary 9 September 2004 202 -10 036-01 an encryption algorithm and cryptograp hic keys before data is transmitted or received. Based on Netscape’ s SSL 3.0, TLS supercedes and is an extension of SSL. TLS and SSL are not interoperable. Universal Plug and Play UPnP . A network ...

  • NETGEAR NMS100 - page 66

    Reference Manual for the ProSafe Network Manag ement System NMS1000 10 Glossary September 2004 202 -10 036-01 WINS WINS. W indows Internet Naming Servi ce is a server process for reso lving W indows-based computer names to IP addresses. Wireless Network Name (SSID) W ireless N etwork Name (SSID) is the name assigned to a wireless netw ork. This is ...

  • NETGEAR NMS100 - page 67

    Index 1 A Air Messanger Pro installation 3-2 Auto MDI/MDI-X G-2 Auto Uplink G-2 automatic alarms, configuring 5-2 B broadcast packet losses network discovery troubleshooting 6-5 button bar Edit 3-5 Main 3-5 main 3-5 C Cat5 cable G-2 community names incorrect or missing 6-3 console button commands 3-5 disabling automatic login 3-3 elements 3-4 start ...

  • NETGEAR NMS100 - page 68

    2 Index L login, disabling automatic console login 3- 3 M Main button bar 3-5 Manage menus 4-1 1 Map database 4-1 Map objects adding 4-10 moving 4-3 moving at the r oot level 4-3 moving from one subnet to another 4-5 moving inside subn et levels 4-4 T ypes 4-10 Map Selection T ree 4-1 Map V iew windows 4-2 MDI/MDI-X G-2 MDI/MDI-X wiring G-5 menus c ...

  • NETGEAR NMS100 - page 69

    Index 3 trend data viewing in a graph window 4-15 trend reports limiting saved instance s 4-16 troubleshooting network discovery 6-1 V V iew W indow area 3-7 W W orld Wide W eb 1-ii ...

メーカー NETGEAR カテゴリー Network Card

NETGEAR NMS100のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- NMS100の取扱説明書
- NETGEARの製品カード
- パンフレット
- またはNETGEAR NMS100の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、NETGEAR NMS100の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、NETGEAR NMS100の取り付け説明書、サービスマニュアル、簡易説明書、またはNETGEAR NMS100のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、NETGEAR NMS100の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

NETGEAR NMS100デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがNETGEAR NMS100を使用するのを助ける技術的文書のことです。説明書は通常、全てのNETGEAR NMS100ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

NETGEARの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. NETGEAR NMS100の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははNETGEAR NMS100の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。NETGEAR NMS100に関してこのドキュメントで見つけることができる全てのヒントの目次
3. NETGEAR NMS100デバイスの基本機能を使うにあたってのヒント。 NETGEAR NMS100のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。NETGEAR NMS100に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるNETGEAR NMS100のメーカー/サービスへの連絡先に関する情報。

NETGEAR NMS100についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもNETGEAR NMS100の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNETGEAR NMS100で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)