-
Texas Instruments TAS5601 - page 1
User's Guide SLOU219 – February 2008 TAS5601 Digital Power Amplifier With MC5601 Modulator Kit This manual describes the operation of the TAS5601EVM evaluation module from Texas Instruments. Contents 1 Purpose of This Document ................................................................................................. 3 2 Overview ..... ...
-
Texas Instruments TAS5601 - page 2
www.ti.com 3 Related Documentation from Texas Instruments ...................................................................... 23 2 TAS5601 Digital Power Amplifier With MC5601 Modulator Kit SLOU219 – February 2008 Submit Documentation Feedback ...
-
Texas Instruments TAS5601 - page 3
www.ti.com 1 Purpose of This Document 2 Overview Purpose of This Document This user's guide describes how to use the TAS5601 evaluation module (EVM) to evaluate performance of the TAS5601 device. The document contains the following. • Details of how to properly set up an MC5601 modulator kit. • Details of how to install and use the GUI to ...
-
Texas Instruments TAS5601 - page 4
www.ti.com 2CH AnalogInput fromothersource/ Digitalout SPDIF/ Optical,Coax T AS5601EVM Left Right I2S MC5601 2.1 TAS5601EVM and MC5601 Features Overview Figure 2. EVM Controller Board (MC5601) The TAS5601EVM is a complete 2-channel digital audio amplifier system. Also included in the kit is a MC5601 board that includes a USB inter ...
-
Texas Instruments TAS5601 - page 5
www.ti.com 3 Installation 3.1 Software Installation 3.2 EVM Installation 3.2.1 PSU Interface 3.2.2 Loudspeaker Connectors Installation • Access to control signal gain and data format through EVM-software graphic user interface (GUI) This section describes the software and EVM installation. Execute the GUI install program setup.exe, found in the T ...
-
Texas Instruments TAS5601 - page 6
www.ti.com 3.2.3 USB Interface 3.2.4 Digital Audio Interface SPDIF (J1/OPTO) 3.2.5 ADC Interface 3.2.6 Board Power-Up General Guidelines Installation • Connect the left speaker wires to the corresponding metal binding posts marked J2 and J4 on the TAS5601EVM board. • Connect the right speaker wires to the corresponding metal binding posts marke ...
-
Texas Instruments TAS5601 - page 7
www.ti.com 4 Using the EVM Software 4.1 Getting Started 4.2 Setup Tab Using the EVM Software The EVM software provides access to the TAS5706 configuration and status registers through a GUI window with 7 tabs for the various EVM parameters. Open the zip file (.zzp) on the installation CD shipped with the EVM. Extract the files and run the setup.exe ...
-
Texas Instruments TAS5601 - page 8
www.ti.com 4.2.1 All Channel Shutdown 4.2.2 Advanced Features : EQ and DRC 4.2.2.1 EQ Loading and Viewing 4.2.2.2 DRC Coefficient Loading Using the EVM Software Figure 5. Volume Tab System comes up with all channel shut down asserted. To exit All Channel Shutdown , select Setup Tab, unselect All Channel Shutdown . EQ and DRC can be designed in ALE ...
-
Texas Instruments TAS5601 - page 9
www.ti.com Using the EVM Software Figure 6. EQ Viewer Tab Figure 7. DRC Viewer Tab SLOU219 – February 2008 TAS5601 Digital Power Amplifier With MC5601 Modulator Kit 9 Submit Documentation Feedback ...
-
Texas Instruments TAS5601 - page 10
www.ti.com 4.2.3 EQC/DRC Demo 4.2.4 I 2 C Tab Using the EVM Software This tab is used to compare different settings. Multiple EQ files can be loaded and switched back and forth for listening purposes to select the golden filters. Figure 8. EQ/DRC Demo Tab Clicking on the I 2 C Interface tab displays the window shown in Figure 9 . This window can be ...
-
Texas Instruments TAS5601 - page 11
www.ti.com 4.2.4.1 I 2 C Writes and Reads Using the EVM Software Data can be written to or read from the device. Single- or multiple-byte write/read is determined by the subaddress. If less than 0x20, single-byte access is required. Otherwise, multiple-byte access is used. Figure 9. I 2 C Single Byte Figure 10. I 2 C Multiple Byte SLOU219 – Febru ...
-
Texas Instruments TAS5601 - page 12
www.ti.com 4.3 Volume Tab Using the EVM Software Select the Volume tab. Unmute the Master volume. Click on the 0 db button. Figure 11. Volume Control Tab TAS5601 Digital Power Amplifier With MC5601 Modulator Kit 12 SLOU219 – February 2008 Submit Documentation Feedback ...
-
Texas Instruments TAS5601 - page 13
www.ti.com 5 EQ/DRC Tool Installation 5.1 TI ALE Guide for TAS570x 5.1.1 Overview 5.1.2 Select Device EQ/DRC Tool Installation If you want to use the Texas Instruments ALE tool to create filters for the EQ and DRC parameters, unzip the ale.zip file from the ALE directory located on the provided compact disc into your C:USERDATA directory. You ca ...
-
Texas Instruments TAS5601 - page 14
www.ti.com 5.2 Edit EQ Filter EQ/DRC Tool Installation Click on Edit pulldown menu, and select Edit Filter Parameters as shown in the following illustration. An EQ Filter dialog box appears as shown in the following illustration. Users then enter EQ-related data. Once finished, close the dialog box. 14 TAS5601 Digital Power Amplifier With MC5601 Mo ...
-
Texas Instruments TAS5601 - page 15
www.ti.com 5.2.1 Display the Graph EQ/DRC Tool Installation For channels 1 and 2, users can create up to seven EQ data sets. For channel 6, users can create up to four EQ data sets. See the TAS570x data sheet for detailed technical information related to filters. To display the graph, select the Draw Filters icon as shown in the following figure. T ...
-
Texas Instruments TAS5601 - page 16
www.ti.com 5.2.2 Generate EQ Filter Data EQ/DRC Tool Installation Click on the Edit pulldown menu, and select Generate Device Data as shown in the following illustration. A Select Channel dialog box appears as shown in the following illustration. Users can select to which channel the EQ filter data is applied. Once the channel is selected, another ...
-
Texas Instruments TAS5601 - page 17
www.ti.com 5.2.3 Save EQ Data to File 5.3 Edit and Generate DRC Data EQ/DRC Tool Installation Click on the File pulldown menu, and select Save Device Program Data J as shown in the following illustration. Click on the pulldown menu, and select Dynamic Range Compression for TAS570X as shown in the following illustration. A new window appears along w ...
-
Texas Instruments TAS5601 - page 18
www.ti.com 5.3.1 Edit and Generate Alpha Filter Data EQ/DRC Tool Installation To see the drawing with the new data, click on the Apply button. The DRC combination box allows users to select to which DRC, 1 or 2, the data is applied. To save the data for the selected DRC, 1 or 2, click on the Save Data button. Continuing from the previous section, c ...
-
Texas Instruments TAS5601 - page 19
www.ti.com 5.3.2 Save DRC Data to File 5.4 Save EQ/DRC/Alpha Data to File EQ/DRC Tool Installation When finished generating Alpha Filter data for the DRCs, the user clicks the OK button to close the dialog. To save the DRC data only, click the File pulldown menu, and select the Save As .DRC570X File item as shown in the following illustration. The ...
-
Texas Instruments TAS5601 - page 20
www.ti.com 6 Jumpers and Control Utilities 6.1 Switches Jumpers and Control Utilities Reset is an active-low function. Pressing the master reset switch (S2) resets the TAS5601. TAS5601 Digital Power Amplifier With MC5601 Modulator Kit 20 SLOU219 – February 2008 Submit Documentation Feedback ...
-
Texas Instruments TAS5601 - page 21
www.ti.com 7 Board Layouts, Bill of Materials, and Schematics 7.1 TAS5601EVM Board Layouts Board Layouts, Bill of Materials, and Schematics Figure 12. Top Silk Screen View Figure 13. Bottom Silk Screen View SLOU219 – February 2008 TAS5601 Digital Power Amplifier With MC5601 Modulator Kit 21 Submit Documentation Feedback ...
-
Texas Instruments TAS5601 - page 22
www.ti.com 7.2 Bill of Materials 7.3 Schematics Board Layouts, Bill of Materials, and Schematics Table 2. Bill of Materials for TAS5601EVM TI SEMICONDUCTORS Item Description Ref Des Qty MFG MFG:Part No. Vendor Vendor: Part No. Alt. Part No. 1 80W 4 CH Power Amp, HTSSOP56-DCA PA1 1 Texas TAS5601DCA Texas TAS5601DCA No Alt. Part No. Instruments Instr ...
-
Texas Instruments TAS5601 - page 23
of Filename: Mod: PCB Rev: Sheet Save Date: CX Schematic Rev: Design Team: Drawn By: TI Print Date PROJECT: of Filename: Mod: PCB Rev: Sheet Save Date: CX Schematic Rev: Design Team: Drawn By: TI Print Date PROJECT: IN IN IN NC NC BTL 1 LDN PGND PGND PGND PGND THERMAL PGND PGND PGND PGND PGND PGND PGND PGND 2X BTL MODE PGND PGND OUT C5-C8 PGND PGND ...
-
Texas Instruments TAS5601 - page 24
of Filename: Mod: PCB Rev: Sheet Save Date: CX Schematic Rev: Design Team: Drawn By: TI Print Date PROJECT: of Filename: Mod: PCB Rev: Sheet Save Date: CX Schematic Rev: Design Team: Drawn By: TI Print Date PROJECT: NC MC5601.SCH NC 1 LDN USB BOOT EPROM USB RESET Tue Oct 02, 2007 6 NC TAS5702 USB I/O TO CURT STEPHENS OCTOBER 2, 2007 DECOUPLING (A0 ...
-
Texas Instruments TAS5601 - page 25
of Filename: Mod: PCB Rev: Sheet Save Date: CX Schematic Rev: Design Team: Drawn By: TI Print Date PROJECT: of Filename: Mod: PCB Rev: Sheet Save Date: CX Schematic Rev: Design Team: Drawn By: TI Print Date PROJECT: H H 24Bit/MSB/I2S FMT1 FMT0 NC MC5601.SCH NC 2 LDN (DEFAULT) DECOUPLING DATA FORMAT 6 NC Tue Oct 02, 2007 TO ADC TO TAS5702 LOCK SPDIF ...
-
Texas Instruments TAS5601 - page 26
of Filename: Mod: PCB Rev: Sheet Save Date: CX Schematic Rev: Design Team: Drawn By: TI Print Date PROJECT: of Filename: Mod: PCB Rev: Sheet Save Date: CX Schematic Rev: Design Team: Drawn By: TI Print Date PROJECT: MC5601.SCH NC NC 3 LDN SPDIF OCTOBER 2, 2007 Tue Oct 02, 2007 FROM NC 6 5V DECOUPLING TO TAS5702 PCM1808PW ADC ANALOG INPUTS CURT STEP ...
-
Texas Instruments TAS5601 - page 27
of Filename: Mod: PCB Rev: Sheet Save Date: CX Schematic Rev: Design Team: Drawn By: TI Print Date PROJECT: of Filename: Mod: PCB Rev: Sheet Save Date: CX Schematic Rev: Design Team: Drawn By: TI Print Date PROJECT: FROM FROM FROM FROM MUTE FAULT VALID PGND PGND MC5601.SCH NC FROM NC 4 LDN SPDIF USB SPDIF ADC P.S. MUTE PGND POWER DOWN TO SPDIF PGND ...
-
Texas Instruments TAS5601 - page 28
of Filename: Mod: PCB Rev: Sheet Save Date: CX Schematic Rev: Design Team: Drawn By: TI Print Date PROJECT: of Filename: Mod: PCB Rev: Sheet Save Date: CX Schematic Rev: Design Team: Drawn By: TI Print Date PROJECT: A0 SDIN1 MCLK TO ADC JP4 JP3 JP8 JP7 3.3V@1A TO ADC TO SPDIF NC MC5601.SCH NC 5 LDN LRCLK LOW VOLTAGE PVDD = 10-20V SNUBBERS EMI SDIN2 ...
-
Texas Instruments TAS5601 - page 29
www.ti.com 8 Related Documentation From Texas Instruments Related Documentation From Texas Instruments Table 3 contains a list of data manuals that have detailed descriptions of the integrated circuits and other components used in the design of the TAS5601EVM. The data manuals can be obtained at the URL http://www.ti.com . Table 3. Related Document ...
-
Texas Instruments TAS5601 - page 30
EVALUATION BOARD/KIT IMPORTANT NOTICE Texas Instruments (TI) provides the enclosed product(s) under the following conditions: This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use. Persons handling th ...
-
Texas Instruments TAS5601 - page 31
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders ...
Texas Instruments TAS5601についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもTexas Instruments TAS5601の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがTexas Instruments TAS5601で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。