-
NETGEAR XAVB5401 - page 1
Powerline 500 PassThru Adapter (XA VB5401) Installation Guide ...
-
NETGEAR XAVB5401 - page 2
2 Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 LED Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Button Descriptions . . . . . . . . . . . . . . . . . . ...
-
NETGEAR XAVB5401 - page 3
3 Package Contents Ethernet cables (2) Powerline adapters (2) Adapters vary by region. Y our adapter might look different. ...
-
NETGEAR XAVB5401 - page 4
4 Hardware Features Security button Ethernet port Factory Reset button Filtered AC socket Power LED Powerline LED Ethernet LED ...
-
NETGEAR XAVB5401 - page 5
5 LED Descriptions The LEDS indicate the status of your Powerline adapters. • When you plug in the adapter , the Power LED lights and turns green. If the Ethernet port is inactive for more than 10 minutes, the adapter enters power saving mode and the Power LED turns amber . Power saving mode is disabled by default. • The Ethernet LED lights and ...
-
NETGEAR XAVB5401 - page 6
6 Button Descriptions The buttons on your Powerline adapters let you do the following: • Factory Reset button . T o return your Powerline adapter to its default factory settings, press the Factory Reset button for 2 seconds, and then release it. • Security button . Use the Security button to secure your Powerline network. For information about ...
-
NETGEAR XAVB5401 - page 7
7 Install Y our Powerline Adapters 1. Plug each Powerline adapter into a wall outlet. 2. Secure your Powerline network. a Make sure that the Power LED is solid green on each Powerline adapter . b On the first Powerline adapter , press the Security button for 2 seconds, and then release the button. The Power LED blinks green while the adapter is set ...
-
NETGEAR XAVB5401 - page 8
8 After a few seconds, the security is set and the Power LED turns solid green. The Powerline adapters can communicate over the Powerline network in a secure way . W arning: Do not press the Security button until the Power LED on each adapter is solid green. Pressing this button too soon can temporarily disable Powerline communication. If Powerline ...
-
NETGEAR XAVB5401 - page 9
9 3. Plug one of the Powerline adapters into a wall outlet near your router or gateway . 4. Connect the Powerline adapter to the LAN port of the router or gateway using an Ethernet cable. Room A ...
-
NETGEAR XAVB5401 - page 10
10 5. Plug the other Powerline adapter into a wall outlet where you want to add Internet access. 6. Connect the second Powerline adapter to an Ethernet-based device using an Ethernet cable. Room B Y our Ethernet-based device (computer , game console, set-top box, or Blu-ray player) now has Internet access. ...
-
NETGEAR XAVB5401 - page 11
11 Compatible NETGEAR Powerline Devices Y our Powerline devices can share a Powerline network with these compatible NETGEAR devices: XA VB1301, XA VB1401, XA VB2101, XA VB2602, XA VNB2001, XA VB5601, XA VB5101, XA VB5201, XA VB5602, XAUB251 1, XA VB5004, XA VB1004, XWNB5602, XWNB5201, and XWNB1601. For a complete list of HomePlug A V -certified dev ...
-
NETGEAR XAVB5401 - page 12
12 Safety Information • For national approvals (approval schemes other than CB), relevant national standards for plug, socket-outlet, and direct plug-in units (for example, US) shall also be consulted while testing and approving such products according to national standards. • AC input rating (NA): 100–125V , 0.2A (Max); 50–60 Hz excluding ...
-
NETGEAR XAVB5401 - page 13
13 cord needs to be a maximum of 1 m long and a minimum of 0.75 mm square of cross-sectional area. • Do not plug devices that exceed the product ratings into the XA V5401 filtered AC outlet. The output voltage of the filtered AC outlet is the same as the power outlet that the XA V5401 is plugged into. T o help avoid damaging your system, be sure ...
-
NETGEAR XAVB5401 - page 14
...
-
NETGEAR XAVB5401 - page 15
...
-
NETGEAR XAVB5401 - page 16
NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA April 2013 Support Thank you for purchasing this NETGEAR product. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my .netgear .com . Y ou must register your product before you can use NETGEAR telephone sup ...
NETGEAR XAVB5401についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもNETGEAR XAVB5401の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNETGEAR XAVB5401で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。