Behringer DSP1200Pの取扱説明書

42ページ 2.29 mb
ダウンロード

ページに移動 of 42

Summary
  • Behringer DSP1200P - page 1

    1 E User´s Manual Bedienungsanleitung D ...

  • Behringer DSP1200P - page 2

    2 acc. to the Directives 89/336/EWG and 73/23/EWG We, BEHRINGER INTERNA TIONAL GmbH Hanns-Martin-Schleyer-Straße 36-38 D - 47877 Willich Name and address of the manufacturer or the introducer of the product on the market who is established in the EC herewith take the sole responsibility to confirm that the product: MODULIZERPRO DSP1200P Type de ...

  • Behringer DSP1200P - page 3

    3 E This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to con- stitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and mainte- nance instructions in the accompanying literature. Read the manual. SAFETY INSTRUCTIO ...

  • Behringer DSP1200P - page 4

    4 DSP1200P MODULIZERPRO Ultra-high performance Digital Multi-Effects Processor powered by a 24-bit high-speed Digital Signal Processor (DSP) ...

  • Behringer DSP1200P - page 5

    5 E FOREWORD Dear Customer, Welcome to the team of MODULIZERPRO users and thank you very much for expressing your confidence in BEHRINGER products by purchasing this unit. It is one of my most pleasant tasks to write this letter to you, because it is the culmination of many months of hard work delivered by our engineering team to reach a very am ...

  • Behringer DSP1200P - page 6

    6 T ABLE OF CONTENTS 1 . INTRODUCTION . . . . .. ............................................................................................................... 7 1. 1 The design concept .......................................................................................................... ............... 7 1. 2 Before you begin ................ ...

  • Behringer DSP1200P - page 7

    7 E 1. INTRODUCTION With the BEHRINGER MODULIZERPRO you have acquired an extremely powerful and versatile multi-effects processor, which besides first-class modulation effects is equipped with many other algorithms. Despite the large number of effects, variations, and editable parameters, the DSP1200P is easily and intuitively operated owing to ...

  • Behringer DSP1200P - page 8

    8 s Extremely low-noise and high-precision 20-bit AD/DA converters. s A professional 46 kHz sampling rate guarantees high signal resolution with a frequency response of 20 Hz through 20 kHz. s The 24-bit processor provides lots of computing power (dual-engine software) for real-time effect modula- tion. s Like all BEHRINGER products, the MODULIZER? ...

  • Behringer DSP1200P - page 9

    9 E 1.3 Control elements ...

  • Behringer DSP1200P - page 10

    10 + As long as none of the edit functions to the right of the jog wheel has been selected, you can use the wheel to select a program directly, which is shown by a dot lighting up in the display. While this dot is on, you can select a program though its settings will not take immediate effect. When the jog wheel has not been touched for one second, ...

  • Behringer DSP1200P - page 11

    11 E The MODULIZERPRO enters Mix mode. When the display reads two dashes, the DSP1200P is in External Mix mode, and when a figure is read, Internal Mix mode is selected. To toggle between the two modes, simply press both EQ keys for about 1 second. In Internal Mix mode you can use the jog wheel to freely select the effect intensity in each prese ...

  • Behringer DSP1200P - page 12

    12 1. 4 The effect algorithms In a digital effects device all effect programs are based on algorithms computed by a Digital Signal Processor (DSP). How does this work? A DSP can perform an enormous number of binary computations in a minimum amount of time. The binary computations that are used to generate an effect as part of a program are deter- m ...

  • Behringer DSP1200P - page 13

    13 E + We recommend that you make frequent A/B comparisons (IN/OUT) between the original and the processed signals. Rule of thumb: sound-enhancing effects should be missed when ab- sent instead of directly audible. Remember, less is more. ...

  • Behringer DSP1200P - page 14

    14 EDITD: Bandlimit: this parameter enables you to filter the feedback path, which is useful for feedback set- tings of up to 100%. + Tip: there is no limitation as to the range of instruments that can be processed with a flanging effect. Check out vocal sounds too, but remember that less is often more! Spatial Flanger Includes an addition ...

  • Behringer DSP1200P - page 15

    15 E EDITB: Spread: controls the depth of the sound image. EDITC: Crossover Frequency: adjusts the 3D effect onset. In this algorithm the MIX function controls the ratio of middle vs. side signals. + When you increase stereo width on heavily reverberated audio material, the reverb can sound unnatural and too intense. ...

  • Behringer DSP1200P - page 16

    16 The parameters: VARIATION: Bass Frequency: this parameter controls the maximum frequency of bass components to be retained in the mix signal. EDITA: Gain: adjusts the level of the output signal by +/-6dB. EDITB: Bass Pan: adjusts the panorama of the low-frequency range. EDITC: Treble Pan: controls the stereo b ...

  • Behringer DSP1200P - page 17

    17 E + Similar to the compressor, there is no need for a Mix function here. Gate Noise-gates can be used in a variety of applications, both on stage and for miking instruments in the studio. For example, they can be used to suppress feedback (e.g. from vocal mics) or to fade out vocal signals (plus background noise) during pauses. In this case, the ...

  • Behringer DSP1200P - page 18

    18 Vintager ® Digital technology has been trying for years to produce ever more high-quality, low-noise and brilliant sounds, but most recently more and more people have been going back to the roots looking for the warmth of old analog sounds. The techno/dance community swears by vinyl anyway, and many a music lover misses the flair of ...

  • Behringer DSP1200P - page 19

    19 E Guitar Speaker This effect simulates three different speaker types. Types 1 and 2 are typical guitar amp speakers, while type 3 represents a multimedia speaker. Additionally, you can use a parametric EQ to fine-tune the sound image. The parameters: VARIATION: Speaker Type: selects one of three speaker types. EDITA: Peak Frequ ...

  • Behringer DSP1200P - page 20

    20 EDITB: Speed: controls LFO speed*) in mode L, envelope follower speed in mode A and random oscillator speed in modes R0-R7. EDITC: Depth: determines the modulation depth. EDITD: Feedback: controls the resonance intensity. 2. OPERATION 2. 1 Effects structure ...

  • Behringer DSP1200P - page 21

    21 E 2. 2 Selecting presets The MODULIZERPRO stores 100 user-definable presets. After power-up, the unit automatically recalls the preset last used. To select another preset, use the jog wheel to enter the preset number of your choice. Turn the wheel clockwise to increment the preset number, or counterclockwise to decrement it. + Please note tha ...

  • Behringer DSP1200P - page 22

    22 Dis play M ode 0 No c ont rol l er dat a i s t rans m i t t ed 1 Cont roll er dat a i s rec eiv ed but not t rans m i t t ed 2 Cont roll er dat a i s t rans m i t t ed but not rec ei v ed 3 Cont roll er dat a i s t rans m i t t ed and rec ei v ed T ab. 2.1: Controller settings The fourth page gives you access to the program change setup. The dis ...

  • Behringer DSP1200P - page 23

    23 E s MIDI THRU The MIDI THRU jack is used to loop through incoming MIDI data, i.e. any control data received at the MIDI IN of the MODULIZERPRO can be transmitted via the MIDI THRU jack to other MIDI devices/instruments. s MIDI OUT The MIDI OUT jack allows for transmitting MIDI data that originate from the MODULIZERPRO. We are cur- rently d ...

  • Behringer DSP1200P - page 24

    24 ...

  • Behringer DSP1200P - page 25

    25 E ...

  • Behringer DSP1200P - page 26

    26 can wire the MODULIZERPRO in stereo. Connect the preamp to the audio inputs of the MODULIZERPRO, and the audio outputs (left/right) to one channel each of the power amp (left/right). + Since most guitar amps only have a serial insert loop, you should make sure that the MODULIZERPRO is set to Mix-Intern mode. In this mode you can control ...

  • Behringer DSP1200P - page 27

    27 E 3. 6 Saving data via MIDI The MODULIZERPROs MIDI implementation also allows for archiving one or several presets on an external storage medium. Proceed as follows: Connect the MIDI OUT jack of the MODULIZERPRO to the MIDI IN jack of a MIDI data recorder (e.g. se- quencer). Press the STORE and IN/OUT keys simultaneously to enter MIDI m ...

  • Behringer DSP1200P - page 28

    28 Quantization Steps U (V oltage) -8 -7 -6 -5 -4 -3 -2 Digital Words 1111 111 0 1 101 1 100 101 1 1010 1001 1000 0000 t (Time) 0001 0010 001 1 0100 0101 01 10 01 11 Conversation Rate 8 7 6 5 4 3 1 2 3 4 5 6 7 8 -1 -2 -3 -4 -5 -6 -7 -8 Quantization Errors (Noise) Continuous Analog Signal Fig. 4.1: T ransfer diagram for an ideal linear ADC (2 s c ...

  • Behringer DSP1200P - page 29

    29 E Stage Listening Position Direct Sound Early Reflections Early Reflections Diffuse Reflections Fig. 4.2: Direct and reflected sounds reaching the listeners ear. Spatial information is an important means of orientation, because human hearing is also used to determine the position of a sound source. In certain situations, this capability can b ...

  • Behringer DSP1200P - page 30

    30 is further reduced. Generally, dynamic restrictions are due to noisy storage in transmission media and also the maximum headroom of these systems. 4.3 .1 Noise as a physical phenomenon All electrical components produce a certain level of inherent noise. Current flowing through a conductor leads to uncontrolled random electron movements. For stat ...

  • Behringer DSP1200P - page 31

    31 E aid of a volume fader, which manually levels the material. During low passages the gain is increased, during loud passages the gain is reduced. Of course it is fairly obvious that this kind of manual control is rather restrictive; it is difficult to detect signal peaks and it is almost impossible to level them out. Manual control is simply not ...

  • Behringer DSP1200P - page 32

    32 times you should switch to the level meter menu where the functioning of the limiter can be monitored. 4.3.4 Expanders/noise-gates Audio, in general, is only as good as the source from which it was derived. The dynamic range of signals will often be restricted by noise. Synthesizers, effects devices, guitar pickups, amplifiers etc. generally pro ...

  • Behringer DSP1200P - page 33

    33 E Tubes do not however have the same task in a recording studio as in an overdriven guitar amp, where the considerably higher saturation of the tube(s) leads to a full and often deliberate modification of the input signal (in many cases combined with a heavy increase in noise floor levels). In the studio more subtle effects are needed. Here, tub ...

  • Behringer DSP1200P - page 34

    34 with the identical type and rating. NEVER use fuses of different ratings or cover faulty fuses with aluminium foil. This can cause fire and electric shocks and will endanger your life and the lives of others. 5. 3 Audio connections As standard, the BEHRINGER MODULIZERPRO is installed with electronically servo-balanced inputs and outputs. The ...

  • Behringer DSP1200P - page 35

    35 E Unbalanced use of mono 1/4" jack plugs Ring Balanced use of stereo 1/4" jack plugs Balanced use with XLR connectors ...

  • Behringer DSP1200P - page 36

    36 5. 5 Operating level switch To adapt the MODULIZER PRO to the used operating level, the unit can be switched between homerecording level (-10dBV) and professional level (+4dBu). Use the LED bars on the frontpanel to determine the optimal setting. The Level indicators should read somewhere between -10 and -6dB, while the Clip LED should ...

  • Behringer DSP1200P - page 37

    37 E 6.2 Variation table Variat i on Edit A Edit B Ed i t C Edit D Mi x Range Range Range Range Range Range 1 Ul tra P ha ser 0.. 127 *) 1.. 8 0.. 127 0.. 127 - 0..10 0 2 Spati al Phaser 0.. 127 *) 1. . 8 0.. 127 0.. 127 - 0..10 0 3 Harm oni c Ex ci te r 0. . 127 0. . 127 0..127 - - 0.. 25 1. ) 4 Aut o Lowpass L1, L2, A 1, A 2 0.. 127 0..127 0..127 ...

  • Behringer DSP1200P - page 38

    38 6.3 MIDI implementation M I DI I m p lem en tatio n Ch ar t Func t io n Tr ansm it t ed Reco gni z ed Rem ar ks Bas i c Channel Def aul t Change d OF F , 1 - 1 6 OF F , 1 - 1 6 O FF, 1 - 16 O FF, 1 - 16 memo r i z e d M ode Def ault M essages Alt er ed 1, 2, 3, 4 X X 1, 2, 3, 4 X X No t e Nu mb e r Tr u e V o i c e X X X X Vel oc i t y No t e ON ...

  • Behringer DSP1200P - page 39

    39 E 6.4 Default settings 1 Ul t r a P haser 51 6 100 127 - 70 2 Spati a l P haser 60 8 80 90 - 70 3 Harm oni c E x c i t er 15 90 60 - - 24 4 A ut o Lowpass A2 60 70 127 29 80 5 A ut o Hi ghpass L2 20 110 127 4 0 80 6 Auto B andpass A2 70 60 127 10 80 7 Jet strea m F l anger 40 4 100 + 100 5 0 50 8 S pat i a l F l anger 60 8 127 +100 95 50 9 Ul tr ...

  • Behringer DSP1200P - page 40

    40 6.5 Preset parameters No. Name Preset Var. Edit A Edit B Edit C Edit D EQ-LO EQ-HI Mix Nr. Name Preset Var. Edit A Edit B Edit C Edit D EQ-LO EQ-HI Mix 1 Spac e Phaser 2 50 8 90 11 0 nF 2 0 7 0 51 Auto Midband W ah 6 A2 55 73 127 15 16 16 80 2 Mr. Excite 3 115 95 90 nF nF 2 2 2 5 52 Chor us I 9 10 55 1 27 127 58 3 3 60 3 Auto Bandpas s 6 L2 16 7 ...

  • Behringer DSP1200P - page 41

    41 E 6. 6 Specifications Analog Inputs Connectors XLR and 1/4" jack Type R F filtered, servo balanced input Impedance 60 kOhms balanced, 30 kOhms unbalanced Nominal Operating Level - 10dBV to +4dBu Max. Input Level +16dBu at +4dB nominal level, +2dBV at -10dBV nominal level Analog Outputs Connectors XLR and 1/4" jack Type E l ...

  • Behringer DSP1200P - page 42

    42 The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER GmbH. BEHRINGER, MODULIZER and VINT AGE ...

メーカー Behringer カテゴリー Stereo Equalizer

Behringer DSP1200Pのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- DSP1200Pの取扱説明書
- Behringerの製品カード
- パンフレット
- またはBehringer DSP1200Pの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Behringer DSP1200Pの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Behringer DSP1200Pの取り付け説明書、サービスマニュアル、簡易説明書、またはBehringer DSP1200Pのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Behringer DSP1200Pの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Behringer DSP1200Pデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがBehringer DSP1200Pを使用するのを助ける技術的文書のことです。説明書は通常、全てのBehringer DSP1200Pユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Behringerの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Behringer DSP1200Pの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははBehringer DSP1200Pの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Behringer DSP1200Pに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Behringer DSP1200Pデバイスの基本機能を使うにあたってのヒント。 Behringer DSP1200Pのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Behringer DSP1200Pに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるBehringer DSP1200Pのメーカー/サービスへの連絡先に関する情報。

Behringer DSP1200Pについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもBehringer DSP1200Pの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBehringer DSP1200Pで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)