Brickcom FD-502Aeの取扱説明書

33ページ 関係なし
ダウンロード

ページに移動 of 33

Summary
  • Brickcom FD-502Ae - page 1

    Hardware Use r ’ s Manua l Megapixel Day & Night Fixed Dome Network Camera Quality Service Grou p Fixed Dome Serie s ...

  • Brickcom FD-502Ae - page 2

    Review Histor y: 1. Sep arate User Manual into HW and SW . 2. Merge FD-300Ap/ FD- 130N / FD -132N/ F D-300 A / FD-302A/ FD-500A/ FD -502A series into this User Manual. 3. Merge FD-200Np V6/ FD-202Ne V6/ FD-300Np St ar/ FD-302Ne St ar/ FD-500Ap V6/ FD -502Ae V6 Product name: Network Camera (Fixed Dome se ries) Release Date: 201 5/09 Manual Revi sion ...

  • Brickcom FD-502Ae - page 3

    T able of Conten Before Y ou Use This Product ....................................................................................... 1 Regulatory Information ................................................................................................ . 2 Chapter 1 - Package Content s ............................................................ ...

  • Brickcom FD-502Ae - page 4

    1 Before Y ou Use This Pr oduct In many countries, there are laws prohibiting or restricting the use of surveillance devices. This Network Camera is a high -performance, web-rea dy came ra which can be part of a flexible surveillance system. It is the user ’ s responsibility to e nsure that the operation of this camera is legal before installi ng ...

  • Brickcom FD-502Ae - page 5

    2 Regulatory Informati on Federal Commu nication Commission I nterference State ment This e quipment has been tested and fo und to comply with the limits for a Class B d igital device, p ursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection ag ainst harmful interference in a residenti al installation. This ...

  • Brickcom FD-502Ae - page 6

    3 Chapter 1 - Package Content s a. Netw ork Camera (Fixed Dome series) b. T erminal Block c. Product CD d. Loca tion Stick er e. W arranty Card f. Screw Bag g. Ea sy Inst allation Guide h. L- WM -01(Optional) ...

  • Brickcom FD-502Ae - page 7

    4 Chapter 2 - Fixed Dome Network Camera Overview The FIXED DOME SERIES is a full -featured, 3-axis, f ixed-dome, network camera. W ith a megapixel progressive sensor and built -in IR-cut filter/ IR illuminator LEDs/ Auto Light se nsor , it can provide 24 -hour , indoor surveillance. The FIXED DOME SERIES features a wide-angle and vari-focal len s, ...

  • Brickcom FD-502Ae - page 8

    5 Chapter 3 - Device App earance Description 1. Below “ Device A ppearance Description ” is for FD -20 0Np V6 / FD-202Ne V6 / FD -300Np St ar/ FD-302Ne S t ar/ FD-502 Ap V6 / FD-502 A e V6 2. Below “ Dev ice A ppearance Description ” is for FD - 20 0Np/ FD -202Np/ FD -300Np/ FD-302Np/ FD-200 A p / FD -202Ap/ FD -302 A p/ FD-500 Ap/ FD -502A ...

  • Brickcom FD-502Ae - page 9

    6 3. Below “ Device A ppearance Description ” is for FD-300Ap 4. Below “ Device A ppearance Description ” is for FD-501Af-series RJ45 Connector Reset Button T erminal Block (For Audio in/out, DI/DO) Conduit Plug and Conduit Hole LENS Video A djustment Screw SD Card Slot T ilt Screw T erminal Block (For Power) RJ45 Connector Reset Button T e ...

  • Brickcom FD-502Ae - page 10

    7 NOTE 1. SD Card Cap acity (*) - The network ca mera is compa tible with SD /SDHC/SDXC (Maximum 64 GB) cards. 2. (*) These are o ptional features. Please refer to the Product List fo r the full list of optional features available for the product. SD/SDHC Card Slot (*) Focus Control Bar (*) View Angle Control Bar (*) SD/SDHC/SDXC Card Slot (*) Focu ...

  • Brickcom FD-502Ae - page 11

    8 Chapter 4 - LED Behavior Function LED Behavior Description Power LED Continuous illumination (Green) Power on Power LED Unit Power off Link LED Continuous illumination (Red) Link Link LED Blinking (Red) Connecting < Extension I/O T erminal Block > The Network Cam era provides a n extension I /O term inal block which is used to connect the c ...

  • Brickcom FD-502Ae - page 12

    9 < Hardware Reset > The Reset Button can be used to re boot the camera, restore it to factory default settings , or switch on FocusEasy . If the camera e xperiences a p roblem, rebooting the ca mera may correct the problem. If the problem remains, please restore the camera to factory default settings and reinstall the s oftw are. T o St art/ ...

  • Brickcom FD-502Ae - page 13

    10 Chapter 5 - Inst allati on 5.1 Hardw are Inst allation A. Remov e the dome cover from the camera device l. PoE, Power , DIDO, A udio Connection 1) Insert the PoE(1) / DC1 2V(2), DIDO and Audio cabl e(3) through con duit hole A o r B. 1 2 3 A B ...

  • Brickcom FD-502Ae - page 14

    11 a. PoE, Power , DIDO, A udio Connection ii. Connect the PoE ( 1) / DC 12V (2), DIDO and Audio (3) Cables to their respective terminals. See the next page for more details regarding the DIDO and Audio connection. 1) Power over Ethernet (PoE) Connection 2) Power A dapter Connection Please refer to the definition of the terminal blocks below . It i ...

  • Brickcom FD-502Ae - page 15

    12 3) DIDO and A udio Connection Please refer to the definition of the terminal blocks below . It is also printed on the motherboard. Term inal Block Pin No. Function Pin 1 5V / 12V* Pin 2 D_0 Pin 3 D_I Pin 4 DIDO GND Pin 5 Audio OUT Pin 6 DGND Pin 7 Mic/Line in Pin 8 DGND *V5&V6 (W DRPro & S tar & S tarPlus) Series Supported ll. For SD ...

  • Brickcom FD-502Ae - page 16

    13 3) Hammer the four plastic anchors which are provided in the product package into the tw o location holes. 4) Mount the camera on the wall and position to two screw slots over the plastic anchors. Insert the screams into the holes and use the screwdriver to tighten the screws clockwise until they are secure. 5) Place the dome cover back on the c ...

  • Brickcom FD-502Ae - page 17

    14 C. For ceiling install ation: The user needs the two screws which are included in the product p ackage and a screw driver . Moun t the c amera on th e desired location a nd use the screwdriver to tighten the screws clockwise through the two holes on each side of the device as shown below . The best place to mount the camera is into a ceiling stu ...

  • Brickcom FD-502Ae - page 18

    15 ii. Release the tilt screw on both side of the device and then rotate the lens to up or down. After completion, tighten the tilt screw. iii. Release th e video adjustment screw and then adjust the lens direction. After completion, tighten the video adjustment screw. ...

  • Brickcom FD-502Ae - page 19

    16 b. How to adjust the view angle and focus range i. Release the view angle controller and then moving the controller bar le ft or right to a djust the view angle. Af ter completion, tighten the view angle controller. ii. Release the focus controller and then moving the con troller bar left or right to adjust the focus ra nge. After completion, ti ...

  • Brickcom FD-502Ae - page 20

    17 5.2 Camera Connection F. Basic Connection (Withou t PoE) a. Connect the power adaptor to the camera dev ice. b. Connect the camera to the Ethernet hub using a RJ45 Ethernet cable. G. Power over Ethernet (PoE) Connection a. Connect the camera to a PoE-enabled hub via single Ethernet cable. b. Connect the camera to a non-PoE hub via PoE Injector . ...

  • Brickcom FD-502Ae - page 21

    18 5.3 System Requirement s Operating System: Microsoft W indow s 8.1/8 /7/Vist a/XP/2000/ Computer: IBM PC/A T Compatible CPU: Pentium 3GHz or faster Memory: 1024 MB or more Monitor: 1024 x 768 pixels or more, 24-bit T ru e color or better Network Interface: 10/100Mbps Netw ork interface card must be installed Web Bro wser: Microsoft Internet Expl ...

  • Brickcom FD-502Ae - page 22

    19 5.4 Sof t w are Inst allation In this m anual, "User" refers to whoever h as access to the Network Camera, and "Administrator" refers to the person who ca n configure the camera and grant user access to the camera. After checking the hardware con nection, run the Installation W izard program included on the product’ s CD -R ...

  • Brickcom FD-502Ae - page 23

    20 B. In the Inst all Shield Wizard dialog box, click <Next> to continue. C. Read the End- User License Agreement and che ck the option “I accept the terms of the license agreement”. Click <Next> to contin ue . ...

  • Brickcom FD-502Ae - page 24

    21 D. Click <Change> to change the a ppointed folder w here inst allation and program files will be stored. Click <Next> to continue. E. Select to create shortcuts. Click <Next> to continue. ...

  • Brickcom FD-502Ae - page 25

    22 F. Select the application and click <Finish> . When launching the PC-NVR program, please refer to the PC-NVR user manual. ...

  • Brickcom FD-502Ae - page 26

    23 5.4.1 Eas y Config T o launch EasyConfig, select EasyConfig from the start menu. If Comp lete Setup type w as use d in the softw are installation, an EasyConfig icon was installed on the desktop. Double click to open the icon. If Custom Setup type w as used in the software installation and an EasyConfig icon was not installed on the desktop, the ...

  • Brickcom FD-502Ae - page 27

    24 ...

  • Brickcom FD-502Ae - page 28

    25 B. Select e ither “S imple M ode ” or “P rofessional M ode ” to obtain the camera’ s IP sett ings. If “S imple M ode ” is selected, EasyConfig will set u p the connection automatically . I f “P rofessional Mode ” is selected, the user will need to configure the IP settings manually . ...

  • Brickcom FD-502Ae - page 29

    26 C. There may be many cameras in the local network. Dif ferentiate the cameras using their UPnP name. Double click on the camera from the survey list to connect. D. For configuring the IP ad dress sett ings, select either <Settings remain the same>, <Automatically obtain an IP Ad dress (DHCP)> or <Set IP Address configuration manua ...

  • Brickcom FD-502Ae - page 30

    27 If <Set IP Address configuration manually> is selected, the following pages will be displayed. ...

  • Brickcom FD-502Ae - page 31

    28 E. If the camera support s the EasyLinkTM function , the following p age will be displayed. Ot herwise, this page w ill not be shown. *If desired, click <Skip> to skip this setting. EasyLinkTM is a unique Brickcom f unction which allo ws users to assign a unique EasyLink name to th eir network ca mera’ s IP address. There is no need to c ...

  • Brickcom FD-502Ae - page 32

    29 F. W hen the IP address settings have been configured , the screen will either display a successful or fa iled connection message. If the connection failed, either try again or quit the installation. a. If “ DHCP IP address settings” was selected, the failure page will be displayed as below: b. If “S ta tic IP address settings” was selec ...

  • Brickcom FD-502Ae - page 33

    30 c. If the connection was successfu l, the user will see the message: “Congratulations. The installation of the ca mera is complete.” W hen this window is displa yed, click <PC-NVR> to start the PC -NVR program, <Live View > to vie w the li ve v ideo from the connected IP camera, or <X> in the top right co rner of the screen ...

メーカー Brickcom カテゴリー Security camera

Brickcom FD-502Aeのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- FD-502Aeの取扱説明書
- Brickcomの製品カード
- パンフレット
- またはBrickcom FD-502Aeの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Brickcom FD-502Aeの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Brickcom FD-502Aeの取り付け説明書、サービスマニュアル、簡易説明書、またはBrickcom FD-502Aeのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Brickcom FD-502Aeの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Brickcom FD-502Aeデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがBrickcom FD-502Aeを使用するのを助ける技術的文書のことです。説明書は通常、全てのBrickcom FD-502Aeユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Brickcomの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Brickcom FD-502Aeの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははBrickcom FD-502Aeの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Brickcom FD-502Aeに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Brickcom FD-502Aeデバイスの基本機能を使うにあたってのヒント。 Brickcom FD-502Aeのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Brickcom FD-502Aeに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるBrickcom FD-502Aeのメーカー/サービスへの連絡先に関する情報。

Brickcom FD-502Aeについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもBrickcom FD-502Aeの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBrickcom FD-502Aeで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)