Pelco FT8301Aの取扱説明書

36ページ 1.19 mb
ダウンロード

ページに移動 of 36

Summary
  • Pelco FT8301A - page 1

    INST ALLA TION F T8301A Miniature Fiber T ransmitter Single-Channel Digitally Encoded Video C1680M (1/06) ...

  • Pelco FT8301A - page 2

    ...

  • Pelco FT8301A - page 3

    C1680M (1/06) 3 Contents Important Safe ty Instruct ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Pelco FT8301A - page 4

    4 C1680M (1/06) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Inst all in accordance with the manufacturer’ s instructions. 8. Do not install ne ...

  • Pelco FT8301A - page 5

    C1680M (1/06) 5 The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. CAUTION: RISK OF ELECTRIC SHOCK. DO NO ...

  • Pelco FT8301A - page 6

    6 C1680M (1/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful in terference, and (2) this device must accept any interference received, including interfer ence that may cause undesired operation. RADIO AND TELEVIS ION INTERFEREN CE T ...

  • Pelco FT8301A - page 7

    C1680M (1/06) 7 Product Overview DESCRIPTION The F T8301A miniature fiber transmitter provides the ability to transmit one composite video channel over one optical fiber . The F T8301A transmitter is compatible with the single-channel F R8301A and dual-channel FR8302A receivers. In addition, the F T8301A transmitter is backward compatible with the ...

  • Pelco FT8301A - page 8

    8 C1680M (1/06) Figure 1. Single-Channel V ideo T ransmission Using F T8301A T ransmitter ONE VIDEO OUTPUT COMPATIBLE RECEIVER ONE FIBER DF5/DF8 FIXED MOUNT DOME FT8 3 01A TRANSMITTER ONE VIDEO OUTPUT COMPATIBLE RECEIVER ONE FIBER EH3512/EH3515 EN C LO S URE FT8 3 01A TRANSMITTER ONE VIDEO OUTPUT COMPATIBLE RECEIVER ONE FIBER ONE VIDEO INPUT FT8 3 ...

  • Pelco FT8301A - page 9

    C1680M (1/06) 9 FRONT PANEL The front panel of the F T8301A transmi tter provides connectors and LED indicators (refer to Figure 2). Figure 2. Front Panel of F T8301A T ransmitter—Multimode and Single-Mode Models NOTE: The F T8301A transmitter provides two video input connectors: one UTP connector and one BNC connector . Only one of the connector ...

  • Pelco FT8301A - page 10

    10 C1680M (1/06) Installation PACKAGE CONTENTS The following it ems are supplied: 1 F T8301A transmitter with attached left and right wall -mounting brackets 1 Regulated switching power suppl y with four plug adapt ers (North American, Australian, U.K., and European configurations); 100-240 VA C, 50-60 Hz input, 12 VDC output 1 BNC-to-BNC RG179/U c ...

  • Pelco FT8301A - page 11

    C1680M (1/06) 11 CONNECTIONS Before mounting the F T8301A transmitter , note t he following transmitter connections (refer to Figure 3): • Power connection NOTES: – A 12 VDC or 24 VA C power supply can be us ed to power the trans mitter . A 12 VDC power supply is provided. If a 24 V AC power supply is used, the power supply must be a Listed Dir ...

  • Pelco FT8301A - page 12

    12 C1680M (1/06) Figure 3. F T8301A T ransmitter Connections POWER C ONNE C TION C OAXIAL C ABLE UTP WIRE S OR FIBER OPTI C C ABLE POWER C ONNE C TION C OAXIAL C ABLE UTP WIRE S OR MULTIMODE MODEL S S INGLE-MODE MODEL S FIBER OPTI C C ABLE ...

  • Pelco FT8301A - page 13

    C1680M (1/06) 13 MOUNTING This section provides info rmation about the following: • Mounting the transmitter to a wall • Mounting the transmitter into an EH2515 Series enclosure • Mounting the transmitter into an EH3512/EH3515 Series enclosure • Mounting the transmitter into a DF5/DF8 fixed mount dome Note that the transmitter c an also be ...

  • Pelco FT8301A - page 14

    14 C1680M (1/06) MOUNTING THE T RANSMITTER INTO AN EH2515 SER IES ENCLOSURE The following procedure provides instructions to mount the F T8301A transmitter into an existing EH2515 Series enclosure installation. T o mount the transmitter into an EH2515 Series enclosure, do the following: 1. Using a small Phillips screwdriver , remove t he left and r ...

  • Pelco FT8301A - page 15

    C1680M (1/06) 15 Figure 5. Attaching EH2500 Bracket to F T8301A T ransmitter (2) SC REW S , 4-40 X 0.187-IN C H, PHILLIP S , FLAT HEAD EH2500 BRA C KET S IDE VIEW OF EH2500 BRA C KET WITH ATTA C HED FT8301A TRAN S MITTER ...

  • Pelco FT8301A - page 16

    16 C1680M (1/06) Figure 6. Mounting F T8301A T ransmitter into EH2515 Enclosure S IDE VIEW OF EH2515 EN C LO S URE WITH FT8301A TRAN S MITTER IN S TALLED EH2500 BRA C KET WITH ATTA C HED FT8301A TRAN S MITTER EH2515 EN C LO S URE FT8301A TRAN S MITTER SC REW, 10-32 X 0.375-IN C H, PHILLIP S , PAN HEAD LO C K WA S HER, #10 ...

  • Pelco FT8301A - page 17

    C1680M (1/06) 17 7. Connect power , fiber optic, and video cables to the transmitter by doing the following: a. Insert the power cable through ei ther of the two gland connectors on the enclosure, route the cable underneath the transmitte r toward the power connector on the transmitter , and then connect the cable to the power connector . b. Insert ...

  • Pelco FT8301A - page 18

    18 C1680M (1/06) MOUNTING THE T RANSMITTER INTO AN EH3512/EH3515 SERIES ENCLOSURE The following procedure provides instructions to mount the F T8301A transmitter into an existing EH3512/EH3515 Series enclosure installation. T o mount the transmitter into an EH3512/EH 3515 Series enclosure, do the following: 1. Using a small Phillips screwdriver , r ...

  • Pelco FT8301A - page 19

    C1680M (1/06) 19 8. Do the following (refer to Figure 9): a. Using the replacement gland supplied in the EH3500 Series accessory kit, attach the gland to either of the cable entry holes on the enclosure. Note that the replacement gland is shorter than the two gl ands provided for the enclosure. b. Using the rubber plug supplied in the EH3500 Series ...

  • Pelco FT8301A - page 20

    20 C1680M (1/06) Figure 10. Removing EH3512/EH3515 Enclosure Accessori es 10. Mount the transmitter into the enclosure by doing the following (refer to Figure 11): a. Position the transmitter at the rear of the enclosure with the connectors facing the camera. b. Attach the transmitter to the enclosure by tightening the 6-32 capt ive screw on the le ...

  • Pelco FT8301A - page 21

    C1680M (1/06) 21 Figure 11. Mounting F T8301A T ransmitter into EH3512/EH3515 Enclosure FT8301A TRAN S MITTER S IDE VIEW OF EH3512/EH3515 EN C LO S URE WITH FT8301A TRAN S MITTER IN S TALLED 6-32 C APTIVE SC REW (ONE SC REW EA C H S IDE) R ...

  • Pelco FT8301A - page 22

    22 C1680M (1/06) 11. Connect power , fiber optic, and video cabli ng to the transmitter by doing the following: a. Insert the power cable through the gland or conduit on the bottom of the enclosure, and then connect the cable to the powe r connector on the transmitter . b. Insert the fiber optic cable through the gl and or conduit on the bott om of ...

  • Pelco FT8301A - page 23

    C1680M (1/06) 23 Figure 13. Reinstalling EH3512/EH3515 Heater Bracket, Blo wer , and Heater Figure 14. Reinstalling EH3512/EH3515 PC Board (2) LO C K WA S HER S , #6 (2) SC REW S , 6-32 X 1.5-IN C H, PHILLIP S , PAN HEAD (2) SC REW S , 6-32 X 0.5-IN C H, PHILLIP S , PAN HEAD (2) LO C K WA S HER S , #6 (4) NYLON WA S HER S ...

  • Pelco FT8301A - page 24

    24 C1680M (1/06) MOUNTING THE T RANSMITTER INTO A DF5/DF8 DOME The F T8301A transmitter can be mounted into DF5 and DF8 in-ceiling and pendan t fixed mount domes. The following sections provide information about the following: • Mounting the DF5/DF8 bracket to the transmitter • Mounting the transmitter into a DF5/DF8 in-ceiling dome • Mountin ...

  • Pelco FT8301A - page 25

    C1680M (1/06) 25 Mounting the T ransmitter into a DF5/DF8 In-Ceiling Dome The following procedure provides in structions to mount the F T8301A tr ansmitter into an existing DF5/ DF8 in-ceiling dom e installation. T o mount the transmitter into a DF5/ DF8 in-ceiling dome, do the following: 1. Mount the DF5/DF8 bracket to the transmitter (refer to th ...

  • Pelco FT8301A - page 26

    26 C1680M (1/06) 8. Mount the transmitter into the back box as follows (ref er to Figure 17): NOTE: In Figure 17, the pan bracket is removed from t he back box for illustration purposes only . Y ou do not need to remove the pan bracket from the back box. a. Do either of the following: • If the dome is a DF5 dome, align the inner sl ot of the DF5/ ...

  • Pelco FT8301A - page 27

    C1680M (1/06) 27 9. Connect the transmitter as follows: a. Connect power to the transmitter . b. Route the fiber optic cable around the inside of the back box toward the transmitter and connect the cable to the fiber opti c connector on the transmitter . WAR N IN G: When routing the fiber opt ic cable, be careful not to bend the fiber at a sharp an ...

  • Pelco FT8301A - page 28

    28 C1680M (1/06) Mounting the T ransmitter into a DF5/DF8 Pendant Dome The following procedure provides in structions to mount the F T8301A tr ansmitter into an existing DF5/ DF8 pendant dome installation. T o mount the transmitter into a DF 5/DF8 pendant dome, do the following: 1. Mount the DF5/DF8 bracket to the transmitter (refer to the Mounting ...

  • Pelco FT8301A - page 29

    C1680M (1/06) 29 8. Mount the transmitter into the back box as follows (ref er to Figure 19): NOTE: In Figure 19, the pan bracket is removed from the back box for illustration purposes only . Y ou do not need to remove the pan bracket from the back box. a. Do either of the following: • If the dome is a DF5 dome, align the inner sl ot of the DF5/D ...

  • Pelco FT8301A - page 30

    30 C1680M (1/06) 9. Connect the transmitter as follows: a. Connect power to the transmitter . b. Route the fiber optic cable around the inside of the back box toward the transmitter and connect the cable to the fiber opti c connector on the transmitter . WAR N IN G: When routing the fiber opt ic cable, be careful not to bend the fiber at a sharp an ...

  • Pelco FT8301A - page 31

    C1680M (1/06) 31 T roubleshooting LED indicators on the F T8301A transmitter (refer to Figure 2) allow you to m onito r signal status and laser status. T able A provides information about the indicators and associated troubleshooting guidelines. NOTE: For troubleshooting information indicated by the LEDs on the associated receiver , refer to the ma ...

  • Pelco FT8301A - page 32

    32 C1680M (1/06) Specifications VIDEO Number of Channels 1 Modulation T ype Pulse code m odulation, 8-bi t resolution Video Input BNC, 1.0 Vp-p, 75 ohms or UTP , 100 ohms; NTSC, P AL, and SECAM Bandwidth 6.5 MHz Gain Unity Differential Gain <2% Differential Phase <1° T ilt <1% Signal-to-Noise Ratio >60 dB (CCIR weighted) GENERAL Operat ...

  • Pelco FT8301A - page 33

    C1680M (1/06) 33 OPTICAL POWER BUDGET , TRANSMISSI ON DIST ANCE, AND LASER CLASS 1 LIMIT F T8301A Miniature T ransmitter Compatible Receivers Wavelength Optical Power Budget Maximum T ransmission Distance Laser Class 1 Limit* Multimode (62.5/125 µm) F T8301AMST FR8301AMSTR 850 nm 20 dB † 2 km (1.2 mi) †† <0.78 mW FR8301MSTR 850 nm 15 dB ? ...

  • Pelco FT8301A - page 34

    34 C1680M (1/06) This equipment contains electrica l or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local de aler for procedures for recycling this equipment. ...

  • Pelco FT8301A - page 35

    PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merc handise pr oved defective in ma terial or wor kmanship for a period of one year after the date of shipment. Exception s to this warrant y are as noted below: • Five years on F T/FR8000 Series fiber o ptic products. • Three years on Genex ® S ...

  • Pelco FT8301A - page 36

    United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East Worl dwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.co m ISO 9001 ...

メーカー Pelco カテゴリー TV Converter Box

Pelco FT8301Aのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- FT8301Aの取扱説明書
- Pelcoの製品カード
- パンフレット
- またはPelco FT8301Aの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Pelco FT8301Aの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Pelco FT8301Aの取り付け説明書、サービスマニュアル、簡易説明書、またはPelco FT8301Aのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Pelco FT8301Aの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Pelco FT8301Aデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPelco FT8301Aを使用するのを助ける技術的文書のことです。説明書は通常、全てのPelco FT8301Aユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Pelcoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Pelco FT8301Aの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPelco FT8301Aの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Pelco FT8301Aに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Pelco FT8301Aデバイスの基本機能を使うにあたってのヒント。 Pelco FT8301Aのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Pelco FT8301Aに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPelco FT8301Aのメーカー/サービスへの連絡先に関する情報。

Pelco FT8301Aについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPelco FT8301Aの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPelco FT8301Aで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)