ページに移動 of 65
U s e r ’ s m a n u a l E L 4 21 0 8 5 . 8 G H z c o r d l e s s t el ep h o n e / answering sy st em with caller ID/call waiting RECORD ANNC. REMOVE ...
Model #: EL42108 Type: 5.8GHz cordl ess telephone/answering system Serial #: (found on the bott om of the telephone base) Purchase dat e: P l a c e o f p u r c h a s e : Both the model and serial number of your A T&T product can be f ound on the bottom of the t elephone base. Congr atulations on purchasing y our new A T&T product. Befor e u ...
Se e pa ge 9 for easy instructions. Y ou must install and charge the battery bef ore using the telephone. If you subscribe to high-speed Int ernet service (Digital Subscriber Line - DSL) through your telephone lines, you must install a DSL filter between the telephone base and the telephone wall jack (page 6). The filter will prevent noise and call ...
P arts checklist Save your sales r eceipt and original packaging in the event warr anty service is necessary . Y our telephone contains the following it ems: T elephone base Bat tery for cor dless handset Power adapter f or telephone base T elephone line cor d Battery c ompartment cover Cordless handset User's manual Quick start guide User’ ...
Getting s tart ed Quick ref erence guide handset .................................................. 2 telephone base .................................. 3 Handset main menu .............................. 4 T elephone base installation ............... 5 Installation options ................................ 7 B at te ry i ns t al la ti on & c ha r ...
2 REMOVE Quick r ef er ence g uide - handset Getting started CID/-VOLUME When in a menu, press to scroll down. When the phone is not in use, press to display caller ID history entries (page 27). While entering names or numbers, press to move the cursor to the left. During a call, press to decrease listening volume. DIR /VOLUME+ When in a menu, pres ...
3 RECORD ANNC. RECORD ANNC. Quic k r ef er enc e gu ide - t elepho ne ba se SETUP Press to r eview or change answering system options (page 33). DELETE Press to del ete message currently pla ying; press twice to delet e all old messages when the phone is not in use (page 34). ANNC. Press to r eview or recor d announcement; press again to quit (page ...
4 Getting started Handset main menu To enter the main menu: 1. Press MENU/ SELECT when the handset is not in use. 2. Press CID or DIR to select a handset feature menu, then press MENU/ SELECT to enter that menu. To return to the idle mode, press OFF/ CLEAR . DIRECTORY DIRECT ORY allows you to stor e and search for names and numbers (page 18). SPEED ...
5 T elephone base install ation The telephone base can be placed on a flat surf ace or vertically mount ed on the wall (page 7). For optimum r ange and better r eception, place the telephone base in a centr al and open location. Avoid placing the t elephone base t oo close to: • Communication devices such as: personal computers, comput er router ...
6 Tel ephone line cord DSL filter (avail able from your DSL Internet provider) T elephone base install ation If you subscribe to high-speed Internet servic e (Digital Subscriber Line - DSL) through your t elephone lines, you must install a DSL filt er between the telephone base and the tel ephone wall jack. The filter will pr event noise and caller ...
7 Install ation options The telephone base is designed for both deskt op installation and wall mount installation. If wall mounting is desir ed, a telephone outlet wall mounting plate with mounting studs is r equired. This mounting plate is av ailable for purchase at many har dware or consumer el ectronics ret ailers and may r equire professional i ...
8 W all mount to desktop ins tallation T o change the telephone base fr om the wall mount position to desktop position, make sur e that you first unplug the power adapter and t elephone line cord fr om the wall outlets bef ore you begin. 1. Slide the telephone base upwards, then pull the telephone base awa y from the wall off of the mounting studs. ...
9 RECORD ANNC. REMOVE Getting started Bat t ery installation & char ging Install the battery as shown below . After installing the bat tery , you can make and receiv e short calls, but replace the handset in the telephone base when not in use. F or optimal performance, charge the handset bat tery for at least 16 hours before use. When fully cha ...
10 Getting started L ow bat tery indicator Return the handset to the telephone base to r echarge when this symbol flashes and the handset beeps or when the handset screen displays L OW BA TTERY . Bat t ery installation & char ging IMPORT ANT INFORMA TION Use only the supplied rechar geable battery , replacement bat tery (part number 89-1332-00- ...
11 T elephone operation Set tings T o customize how the handset works: 1. Press MENU/ SELECT in the idle mode to ent er the handset main menu. 2. Use CID or DIR to scroll t o the desired featur e. 3. Press MENU/ SELECT to select the feat ure. T o stop at any time, pr ess OFF/ CLEAR . Language T o change the language to Espanol, or Fr ancais: 1. Pre ...
12 NO TES : 1. If y ou c hoo se O FF , th e co r dl es s han ds et r in ger wi ll b e t urne d of f , and the sc r een w il l di spl a y R IN GE R OF F an d w he n the co r dl es s han ds et i s idl e (n ot i n u se ). I f the re ar e un r evi ew ed c al ls, t he s cr ee n wi ll d isp la y X X M IS SED CA LL S and i ns te ad o f RI NG ER OF F an d ...
13 Set tings Date & time T o manually set the date and time on the handset display: 1. Press MENU/ SELE CT in the idle mode to enter the handset main menu. 2. Press CID or DIR until the scr een displays DA TE/TIME . 3. Press MENU /SELE CT to view or set date and time. 4. Press CID or DIR to change the month in the date and time line at the bott ...
14 REMOVE Basic oper ation Mak e & end a call To make a call: • Press PHONE/ FLASH , then enter the telephone number. To end a call: • Press OFF/ CLEAR or return the handset in the telephone base. On-hook dialing (pr edialing) • Enter the telephone number, then press PHONE/ FLASH. To make corrections as you enter the number, press CID or ...
15 REMOVE Basic oper ation Redial While the phone is not in use, press REDIAL/ P AUSE repeat edly to display the last five numbers called (up t o 30 digits). T o dial the number displayed, pr ess PHONE/ FLASH . Or , after pressing PHONE/ FLASH , press REDIAL/ P AUSE to call the last dialed number . T o delete the r edial memory , press REDIAL/ P AU ...
16 RECORD ANNC. REMOVE Basic oper ation Handset locat or The handset locator feat ure is useful if you misplace the handset. T o start the paging tone: • Press HANDSET L OCA T OR at the telephone base. This starts the paging tone at the handset for 60 seconds to help y ou locate the handset. NOTE: If the handset is char ging in the telephone base ...
17 REMOVE REMOVE Options while on calls Volume control While on a call, press CID/ -VOLUME to decrease the volume, press DIR /VOLUME+ to increase the volume. Call waiting If you subscribe to call waiting service with your local telephone company, there will be a beep if there is an incoming call while you are already on a call. Press PHONE /FLASH t ...
18 REMOVE Dir ectory Memory capacity The handset directory can st ore up to 30 entries (including nine speed dial entries). Each entry can contain a number up to 24 digit s, and a name up to 14 charact ers. A convenient sear ch feature can help you find and dial numbers quickly (page 22). Timeouts & err or messages If you pause for too l ong wh ...
19 Directory Speed dial You can enter nine speed dial numbers of up to 24 digits. Each number is stored in a speed dial location (1-9). The nine speed dial numbers on the handset will be automatically added to the handset directory. You can also make existing directory entries into speed dial entries (page 23). Enter a speed dial number 1. Press ME ...
20 Directory New dir ectory entries Cr eate & st or e a dir ectory entry 1. Press MENU/ SELECT in the idle mode to enter the handset main menu. 2. Press MENU /SELECT again to enter the DIRECTORY menu. 3. Enter the name when prompted. • Use the dial pad to enter a name (up to 14 characters). See the chart below. - Press DIR to move the cursor ...
21 Directory New dir ectory entries 5. Enter the telephone number when prompted. • Use the dial pad to enter up to 24 digits. - Press DIR to move the cursor to the right. Press CID to move the cursor to the left. - Press DIR or CID to move to the digit you want to delete, then press CHAN /REMOVE to erase the digit. - Press REDIAL /PAUSE to enter ...
22 Directory Dir ectory sear ch Review dir ectory entries 1. Press DIR when the phone is not in use. DIRECT ORY EMPT Y will be displa yed if there are no dir ectory entries in the handset. 2. Press CID or DIR to br owse through the directory . 3. Press OFF/ CLEAR to e xit the direct ory. NOTES: 1. When reviewing direct ory entries, all entries (inc ...
23 Directory T o change or dial entries When any entry is displayed, pr ess MENU/ SELECT to see options. Press CID or DIR t o highlight the option you want (blinking te xt), then press MENU /SELECT again t o select it. Edit an entry When EDIT is blinking, press MENU /SELE CT . Y ou can change the name and number (or distinctive ring setting on the ...
24 REMOVE Caller ID hist ory About caller ID with call waiting This pr oduct has a caller ID function with call waiting feat ure which works with service from your local telephone c ompany. Caller ID with call waiting lets you see the name and tel ephone number of the caller bef ore answering the telephone, even while on another call. It may be nec ...
25 REMOVE Caller ID hist ory Ho w ca ll er I D wo rk s If you subscribe to caller ID servic e provided by your local telephone c ompany , information about each caller will be displayed between the first and second ring. Information about the last 30 incoming calls is stor ed in the call history . Y ou can review the call history to find out who ha ...
26 Caller ID REMOVE Caller ID hist ory There are also occasions when other information or no information is displayed f or various reasons: On-scr een message R eason PRIVA TE NAME Caller pref ers to remain anonymous. PRIVA TE CALLER Ca ll er 's na me a nd t el ep ho ne nu mb er no t r ev ea le d at ca ll er 's r eq ues t. UNKNOWN NAME Y ...
27 Caller ID R eview the caller ID hist ory The call history displays the caller ID in r everse chronological or der , with the latest one (the one with the highest number) first. When the telephone is not in use, pr ess CID t o display information about the most r ecent caller . Review y our call hist ory Press CID to scr oll backward (displa y ol ...
28 Caller ID Delet e call history entries Delet e a single call hist ory entry Press CID to display the latest call er ID listing. Use the CID or DIR keys t o find the entry you want to delet e, then press CHAN /REMOVE . When the entry is deleted, the ne xt oldest recor d is displayed. Delet e all call history entries T o clear your call history c ...
29 Caller ID Add entries t o the dir ectory Add entries to the dir ectory While you have a caller ID entry displa yed, follow the steps below to ent er it into your tel ephone directory . 1. Press CID when the phone is not in use. CID EMPTY will be displayed if there ar e no call history entries in the handset. 2. Press MENU /SELE CT , then press C ...
30 Answering system RECORD ANNC. Answering syst em Message capacity The answering system can r ecord up t o 95 messages depending on the length of each message. Individual messages can be up to four minutes. The ma ximum recor d time can be more than 11 minut es. The actual recor ding time depends on individual message characteristics. Messages wil ...
31 Answering system RECORD ANNC. Day & time announcement s Check day & time Y ou can press CL OCK at any time to hear the current day and time without changing it. Set day & time Before playing each message, the answering system announces the date and time when the message was received. Follow the steps below to set the day, time and ye ...
32 Answering system RECORD ANNC. Out going announcements The outgoing announcement is the message callers hear when calls are answered by the answering system. The telephone is factory set with an announcement. If the telephone is set up to record messages, it answers calls with “ Hello. Please leave a message after the tone. ” You can use this ...
33 Answering system "Number of rings," current setting, then "T o change the setting press SKIP or REPEA T ; to continue setup, press SETUP ." Options: 2/ 4 /6/toll saver “ Ba se r in ge r , ” c ur re nt s et ti n g, t he n “T o ch an ge t he s et ti n g, p r es s S KI P or R EP EA T ; t o c on ti nu e se tu p , p r es s S ...
34 Answering system RECORD ANNC. Message playback Press PLAY/ STOP to listen to messages. The system announces the number of messages, then begins playback. If you have new messages, you will hear only the new messages (oldest first). If there are no new messages, the system will playback all messages (oldest first). Announcements • When playback ...
35 Answering system RECORD ANNC. RECORD ANNC. R ecor d & play memos Memos are message s you rec ord your self . They are save d, pla yed b ack and delet ed e xactl y lik e inco ming me ssages. Y ou can r ecor d a memo a s a r eminder to y ourse lf, or le ave a messag e for someon e else if othe r memb ers of your househo ld are using the an swe ...
36 Answering system RECORD ANNC. Message count er displays Whe n th e a nswe rin g s yst em is idl e, t he mess age co unt er disp lay s t he tot al num ber of answ eri ng sy ste m m essa ges . Se e t he l ist bel ow fo r ex pla nati ons of oth er d isp lay s i n th is cou nte r . Message count er displays 0 No messages. 0 (flashing) The clock need ...
37 Answering system RECORD ANNC. Press ON/OFF until the system announces “ Calls will not be answered. ” "Beep." The system has been turned off. 1 . 2 . Answering syst em mode The answering system’s default factory setting is ON in order to answer and record messages. You can turn the answering system off, but if you do so, the answ ...
38 Answering system 1 . R emot e acc ess A two digit security code is requir ed to acc ess your answering system fr om any touch-tone telephone. This code is 19 b y default, see Changing feat ure options (page 33) t o change it. Di al y ou r t ele ph on e num be r fr om an y t ouc h- to ne te l eph on e. 2 . When the system answers, enter two digit ...
39 RECORD ANNC. Scr een icons, indicat or lights & tones Scr een icons & al ert tones Scr een icons Low batt ery (flashing); place handset in telephone base to recharge. Missed and unreviewed calls. T elephone base tones One beep every 10 seconds A series of beeps Message alert. Press VOL ke ys while the volume level is already at the ma xi ...
40 Handset display scr een messages Scr een display messages REMOVE CONNECTING . . . CONNECTING... The cordless handset is waiting for a dial tone. L OW BA TTERY Cordless handset batt ery is low. Place the cordl ess handset in base to charge the battery (it may take up t o 10 minutes). SCANNING... Cordless handset is scanning for a clear channel to ...
41 My telephone does not work at all. • Make sure the batt ery is installed and charged c orrectly (page 9). For optimum daily perf ormance, return the cordl ess handset to the telephone base aft er use. • Make sure the power adapter is secur ely plugged into an outlet not connected t o a wall switch. • Make sure the tel ephone line cord is p ...
42 There is no dial tone. • First, try all the suggestions in My telephone does not work at all , on the previous page. • Move the cordless handset closer t o the telephone base. It might be out of range. • The telephone line cord might be malfunctioning. T ry installing a new telephone line c ord. • Disconnect the telephone base from the t ...
43 • Make sure the ringer is on (page 12). • Make sure the tel ephone line cord and power adapter are plugged in pr operly (page 6). • The cordless handset may be t oo far from the tel ephone base. Move it closer to the t elephone base. • There may be too many e xtension telephones on the telephone line to all ow all of them to ring simulta ...
44 I cannot dial out. There is noise or interfer ence during a telephone conversation. • The handset may be out of range. Move it closer to the telephone base. • First, try all the suggestions in The telephone does not ring when ther e is an incoming call , on the pr evious page. • Make sure ther e is a dial tone befor e dialing. It is normal ...
45 • Microwave ovens oper ate on the same frequency as your telephone. It is normal t o experience static on your telephone while the micr owave ov en is operating. Do not install this t elephone in the same outlet or near a microwa ve oven. • If your telephone is plugged in with a modem or a surge pr otector , plug the telephone (or modem/ sur ...
46 T r oubleshooting The system does not receiv e caller ID or the system does not display caller ID during call waiting. • Make sure you subscribe t o caller ID with call waiting featur es services provided by the l ocal telephone company . • The caller may not be calling from an area that support s caller ID. • Both you and the caller’s t ...
47 T r oubleshooting The answering system does not answer after the correct number of rings. • Make sure the answering syst em is on. When the answering system is on, the r ed light on the ON/OFF key should be lit. • If toll saver is activated, the number of rings changes t o two when there ar e new messages waiting (page 33). • If the memory ...
48 The answering system does not respond to remot e commands. • Make sure your r emote access c ode is correct (page 38). • Make sure you ar e calling from a touch-t one telephone. When dialing a number , you should hear tones. If y ou hear clicks, then it is not a touch-tone t elephone and cannot activate the answering syst em. • The answeri ...
49 Important saf ety instructions This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information • Read and understand all instructions in the user’s manu ...
50 Important saf ety instructions Especially about c ordl ess tel ephones • Privacy: The same features that mak e a cordl ess telephone convenient creat e some limitations. T elephone calls are tr ansmitted between the telephone base and handset by r adio waves, so there is a possibility that your cor dless telephone conver sations could be inter ...
51 Important saf ety instructions Pr ecautions for users of implanted car diac pacemak ers Cardiac pacemak ers (applies only to digital cor dless telephones): Wirel ess T echnology Resear ch, LL C (WTR), an independent resear ch entity, l ed a multidisciplinary evaluation of the interf erence between port able wireless telephones and implanted car ...
52 F C C part 68 & A CT A This equipment complies with Part 68 of the F CC rules and with technical requir ements adopted by the Administrativ e Council for T erminal Attachments (ACT A). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAE Q##TXXXX. This identifier must be p ...
53 F C C part 68 & A CT A If this product is equipped with a cor ded or cordl ess handset, it is hearing aid compatible. If this product has memory dialing locations, you ma y choose to stor e emergency t elephone numbers (e.g., police, fire, medical) in these l ocations. If you do stor e or test emergency numbers, pl ease: Remain on the line a ...
54 F C C part 15 This equipment has been tested and f ound to comply with the r equirements for a Class B digital device under P art 15 of the Federal Communications Commission (FCC) rul es. These requir ements are intended t o provide reasonable pr otection against harmful interf erence in a r esidential installation. This equipment generates, use ...
55 Limit ed warr anty The A T&T br and i s u se d u nde r l ic ens e - an y r epai r , r epl ac eme nt or war ra nty ser vi ce, an d a ll qu est ion s a bou t t his pr oduc t s hou ld be di re ct ed to : I n t he Un ited St ates of Am eri ca, vi si t o ur w ebs it e a t www .telephones.at t.com or call 1 (800) 222-3111 . In Canada, dial 1 (866) ...
56 Limit ed warr anty 4. What is not cover ed by this limited warranty? This limited warr anty does not cover: • PRODUCT that has been subjected t o misuse, accident, shipping or other physical damage, improper inst allation, abnormal operation or handling, neglect, inundation, fire, wat er , or other liquid intrusion; or • PRODUCT that has bee ...
57 Limit ed warr anty 6. What must you return with the PR ODUCT to get warranty service? Y ou must: a. Return the entire original package and c ontents including the PRODUCT to the service location al ong with a description of the malfunction or difficulty; and b. Include “valid pr oof of purchase” (sales r eceipt) identifying the PRODUCT purch ...
58 T echnical specifications RF frequency band (handset to tel ephone base) 5857.2 MHz — 5865.9 MHz RF frequency band (telephone base t o handset) 912.75 MH z — 917.10 MHz Channels 30 Operating t emperatur e 32°F — 122°F 0°C — 50°C T elephone base volt age (AC vol tage, 60Hz) 104 — 129Vrms T elephone base volt age (AC adapt er output) ...
59 A Alert tones, 39 Answer a call, 14 Answering system, 30-38 B Battery char ging, 9 Battery inst allation, 9 Battery low , 10 C Call waiting, 17 Caller ID, 24 a d d e n tr i e s t o t h e di r ec t or y , 2 9 delete entries, 28 dial entries, 27 Channel, 17 Call screening, 37 Call interc ept, 37 D Delete call history entries, 28 Delete r edial ent ...
R emot e acc ess wallet car d Use the walle t car d belo w to help you re memb er com man ds to co ntr ol yo ur ans weri ng sys te m fr om an y t ouc h t on e t ele pho ne. Fold her e. Cut along dotted line. Action Remot e command Play all messages .................. 1 Play new messages ............... 2 Delete the message .............. 3 Delete a ...
www .telephones.at t.com © 2008 Advanced American T elephones. All rights reserved. AT&T and the A T&T logo are trademarks of A T&T Intellectual Property II, L.P . d/b/a AT&T Int ellectual Property licensed to Adv anced American T elephones. Printed in China. Issue 9 AT&T 09/08. ...
AT&T EL42108のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- EL42108の取扱説明書
- AT&Tの製品カード
- パンフレット
- またはAT&T EL42108の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、AT&T EL42108の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、AT&T EL42108の取り付け説明書、サービスマニュアル、簡易説明書、またはAT&T EL42108のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、AT&T EL42108の製品を使用するにあたって最も人気のある説明書を閲覧できます。
AT&T EL42108デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAT&T EL42108を使用するのを助ける技術的文書のことです。説明書は通常、全てのAT&T EL42108ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
AT&Tの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. AT&T EL42108の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAT&T EL42108の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。AT&T EL42108に関してこのドキュメントで見つけることができる全てのヒントの目次
3. AT&T EL42108デバイスの基本機能を使うにあたってのヒント。 AT&T EL42108のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。AT&T EL42108に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAT&T EL42108のメーカー/サービスへの連絡先に関する情報。
AT&T EL42108についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもAT&T EL42108の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAT&T EL42108で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。