ページに移動 of 71
NC9100h_FM6.0 Multi-Protocol On-board Print/Scan Server Network User’s Guide NC-110h Version B Please read this manual thoroughly before using the machine. You can print or view this manual from the CD-ROM at any time, please keep the CD-ROM in a convenient place for quick and easy reference at all times. The Brother Solutions Center ( http://so ...
i NC9100h_FM6.0 Trademarks Brother is a regi stered trade mar k of Brother Industries, Ltd. UNIX is a trademark of UNIX Systems Laboratories. Ethernet is a trademark of Xerox Corporation. Postscript is a trademark of Adobe Systems Incorpora ted. Apple and Macintosh are registered trademarks of Apple Compute r, Inc. IBM, LAN Server, and AIX are trad ...
ii NC9100h_FM6.0 IMPORTANT NOTE: For technical and operational assistance , you must call the country where you purchased the machine. Calls must be made from within that country. In USA 1-800-284-4329 In Canada 1-877-BROTHER If you have any comments or suggestions, please write to us at: In Europe European Technical Servi ces Shepley Street Audens ...
iii NC9100h_FM6.0 IMPORTANT INFORMATION: REGULATIONS Federal Communications Commi ssion (FCC) Declaration of Conformity (For U.S.A. only) Responsible Party: Brother Internat ional Corporation 100 Somerset Corporate Boule vard Bridgewater, NJ 08807-091 1, USA TEL: (90 8) 704-1700 declares, that the product s Product Nam e: Brother Netw ork Interfac ...
iv NC9100h_FM6.0 Declaration of C onformity (Europe) We, Brother Ind ustries, Ltd., 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467 -8561, Japan declare that this pr oduct is in conformity wit h the following normative documents. Safety: EN 60950, EMC: EN 55022 Class B, EN 55024 following the provisions of th e Low Voltage Directi ve 73/23/EEC and th e E ...
v NC9100h_FM6.0 Table of Contents 1 Introduction ............... ................................................ ........... 1 -1 Computer Netwo rk Basics ............... ................ ................ . 1-1 Overview ............. ................ ................ ............. ........... 1- 1 Protocols ............... ............. .......... ...
vi NC9100h_FM6.0 3 Front Panel Setup ................. ................ ................ ................ 3-1 LAN Main Set up Menu ... ................ ............. ................ ...... 3-1 Setup TCP/IP . ................ ................. ................ ............ 3-2 BOOT Method ........ ............. ................ ................ ... ...
vii NC9100h_FM6.0 6 Troubleshooting ........... ................................ ................. ....... 6 -1 Overview ............. ................ ................ ............. ........... 6- 1 Installation p roblems ........... ................ ................. ....... 6-1 Intermittent Problems ......................... ................. .. ...
1 - 1 INTRODUCTION 1 NC9100h_FM6.0 1 Introduction Computer Network Basics Overview The network-connected Broth er machine allows multiple co mputers to carry out several independent print jobs on on e machine. To use the Brother machine through a network, you need to select a protocol, configure the Print/Scan server, an d set up the compute rs you ...
INTRODUCTION 1 - 2 NC9100h_FM6.0 Protocol Configuration Items TCP/IP Configuration • IP Address • Subnet mask • Gateway (when routers exist on your network) ■ IP Address An IP address is a series of numbers that identifies each computer connected to a network. An I P address consists of four numbers separated by dots. Each number is between ...
1 - 3 INTRODUCTION NC9100h_FM6.0 ■ Gateway (and Router) A Gateway is the transfer device that passe s data between networks. A gateway is a network point that acts as an en trance to another network and se nds data transmitted via the network to an exact destination. The router kno ws where to direct data that arrives at the gateway. If a destina ...
INTRODUCTION 1 - 4 NC9100h_FM6.0 Network Connection Types of Network There are various ways to configure and arrange networks and network printing depending on t he office environment and requirements. We recommend to use this product in a Peer to Peer environment in which each computer directly sends a nd receives data to and from the Brother mach ...
1 - 5 INTRODUCTION NC9100h_FM6.0 Network Example Example : Peer-to-Peer (TCP/IP) • Each computer needs the TCP/IP and Print Proto col configured. • The Brother machine need s to have an appropriate IP address configured. • If a TCP/IP environment has already been est ablished, we recommend using Peer-to-Peer. • If routers are in use, then c ...
INTRODUCTION 1 - 6 NC9100h_FM6.0 Features Overview The Brother Network Print/Scan server allows your Brother machine to be shared on a 10/100Mbit Ethernet Networ k. Administration utilities provide easy configurati on and management of you r Brother machine. Once configured, it allows your machine to print, scan documents and PC-FAX over a network. ...
1 - 7 INTRODUCTION NC9100h_FM6.0 Management Utilities The BRAdmin Professional ut ilities provide powerful, easy to u se configuration and management of Fax and net work settings. Internet Fax / Scan to E-ma il Server (Download only) (FAX-1940C/MFC-3340CN/ MFC-5440CN/MFC-5840CN only) The Brother machine can be assig ned an E-mail address allowing y ...
TCP/IP CONFIGURATION 2 - 1 2 NC9100h_FM6.0 2 TCP/IP Configuration Assigning TCP/IP Information (Basic) Overview The TCP/IP protocol requires that each device on the network have it's own unique IP address. Use the following information to learn about IP address configuration. The Automatic Private IP Addressing (APIPA) protoco l automatically ...
2 - 2 TCP/IP CONFIGURATION NC9100h_FM6.0 Using the machine’s cont rol panel to allocate an IP address Refer to chapter 3 for details on how to configure the IP addre ss information using the machine’s control pa nel. By using the control panel on the machine, yo u can program the IP address details at the same time that other machine parame ter ...
TCP/IP CONFIGURATION 2 - 3 NC9100h_FM6.0 Using BRAdmin Profession al utility and the TCP/ IP Protocol to set the IP addre ss If your PC is using the TCP/IP protocol, do t he following: 1 Select TCP/IP filter in the left frame of the main BRAdmin window. 2 Select the Device menu and choose the Search Active Devices . 3 Select the Devices menu and ch ...
2 - 4 TCP/IP CONFIGURATION NC9100h_FM6.0 Assigning TCP/IP Information Automatically (Advanced) Using DHCP to Conf igure the IP address The Dynamic Host Configuration Pr otocol (DHCP) is one of several automated mechanisms for IP address alloca tion. If you have a DHCP Server in your network (typ ically a Unix/Linux or Windows ® 2000, XP network) t ...
TCP/IP CONFIGURATION 2 - 5 NC9100h_FM6.0 Using RARP to Config ure the IP Address The Brother Print/Scan server’s IP address can be configured using the Reverse ARP (RARP) facility on your host computer. This is done by editing the /etc/ethers file (if this file does not exist, you can create it) with an entry similar to the fo llowing: 00:80:77:3 ...
2 - 6 TCP/IP CONFIGURATION NC9100h_FM6.0 Depending on the system, this entry might be called “bootps” instead of “bootp”. BRN_310107 1 00:80:77:31:01:07 192.189.207.3 and: BRN_310107:ht=ethernet:ha=008077 310107: ip=192.189.207.3: Certain BOOTP host software implementations will not respond to BOOTP requests if you have not included a down ...
FRONT PANEL SETUP 3 - 1 3 NC9100h_FM6.0 3 Front Panel Setup LAN Main Setup Menu You can connect your machine into the netwo rk to use the Network Scanner, Network Prin ter and Network PhotoCapture Center. To use all the network functions, you can set up your machine using the control panel LAN menu. The LAN menu selections allow you to setup the Br ...
3 - 2 FRONT PANEL SETUP NC9100h_FM6.0 Setup TCP/IP This menu has nine sections: BOOT Method , IP Address , Subnet Mask , Gateway , Host Name , WINS Config , WINS Server , DNS Server and APIPA . BOOT Method This selection controls how the ma chine obtains the IP address for itself. The default setting is Auto . 1 Press Menu/Set , 5 , 1 , 1 . ( 4 , 1 ...
FRONT PANEL SETUP 3 - 3 NC9100h_FM6.0 RARP mode Brother Print/Scan server IP addre ss can be configured using the Reverse ARP (RARP) facility on your host computer. This is done by editing the /etc/ethers file (if this file does not exist, you can create it) with an entry similar to the following: 00:80:77:31:01:07 BRN_310107 Where the first entry ...
3 - 4 FRONT PANEL SETUP NC9100h_FM6.0 BOOTP mode BOOTP is an alternative to rarp that has the advantage of allowing configuration of the subnet mask and gateway. In order to u se BOOTP to configure the IP address ma ke sure that BOOTP is installed and running on you r host computer (it should appear in the /etc/services file on your host as a real ...
FRONT PANEL SETUP 3 - 5 NC9100h_FM6.0 DHCP mode Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms for IP addre ss allocation. If you have DHCP server in your network (typically a Unix, Windows ® 20 00/XP network) the Print/Scan server will automatic ally obtains its IP address from DHCP server and register its name ...
3 - 6 FRONT PANEL SETUP NC9100h_FM6.0 Subnet Mask This field displays the cu rrent subnet mask used by the machine. If you are not using DHCP or BOOTP to obtain the subnet mask, enter the desired subnet mask. Che ck with your network ma nager for the subnet mask to use. 1 Press Menu/Set , 5 , 1 , 3 . ( 4 , 1 , 3 for MFC-5440CN ) 2 Select 1 to chang ...
FRONT PANEL SETUP 3 - 7 NC9100h_FM6.0 Host Name You can register the machine name on t he Network. This name is often referred to as a Ne tBIOS name; it will be the name that is registered by the WINS server on your network. Brother recommends the name BRN_X XXXXX (where XXXXXX is the last six digits of the Ethernet address) (up to 15 chara cters). ...
3 - 8 FRONT PANEL SETUP NC9100h_FM6.0 WINS Serv er 1 Press Menu/Set , 5 , 1 , 7 . ( 4 , 1 , 7 for MFC-5440CN ) 2 Press ▲ or ▼ to select Primary or Sec ondary . 3 Press Menu/Set . 4 Enter the WINS Server address. 5 Press Menu/Set . 6 Press Stop/Exit . Primary WINS Ser ver IP Addres s This field specifies the IP ad dress of the primary WINS (Wind ...
FRONT PANEL SETUP 3 - 9 NC9100h_FM6.0 DNS Server 1 Press Menu/Set , 5 , 1 , 8 . ( 4 , 1 , 8 for MFC-5440CN ) 2 Press ▲ or ▼ to select Primary or Se condary . 3 Press Menu/Set . 4 Enter the DNS Server address. 5 Press Menu/Set . 6 Press Stop/Exit . Primary DNS Server IP Address This field specifies the IP address of the primary DNS (Domain Name ...
3 - 10 FRONT PANEL SETUP NC9100h_FM6.0 Setup Misc. Ethernet Ethernet link mode. Auto allows the print server to operate in 100BaseTX full or half d uplex, or in 10BaseT full or half duplex mode by auto negotiation. 100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and 10BaseT Full Duplex (10B-FD) or Ha lf Duplex (10B-HD) fix the prin t serve ...
FRONT PANEL SETUP 3 - 11 NC9100h_FM6.0 Time Zone This field displays the time zone you can set for your country. The time is the difference between yo ur location and Greenwich Mean Time. This time will be shown on documents received via t he Internet. For example the Time Z one for Eastern Time in the USA and Canada is GMT-05:00. 1 Press Menu/Set ...
3 - 12 FRONT PANEL SETUP NC9100h_FM6.0 Restoring the Network Sett ings to Factory Default To restore all network settings of the in ternal Print/Scan server to factory default, please follow the steps below. 1 Make sure the machine is not o perating, then disconnect all the cables from the machine (except power cable). 2 Press Menu/Set , 5 , 0 . ( ...
NETWORK PRINTING FROM WINDOWS ® (Peer to Peer) 4 - 1 4 NC9100h_FM6.0 4 Network Printing from Windows ® (Peer to Peer) For Windows ® 2000/XP, LAN Server and Warp Server users Overview Windows ® 2000/XP users are able to send print jobs directly to the printer without installing any addi tional software. Brother's print server also supports ...
4 - 2 NETWORK PRINTING FROM WINDOWS ® (Peer to Peer) NC9100h_FM6.0 Windows ® 2000/XP (TCP/IP) Configuration The default configuration of Windows ® 2000/XP automatically installs the TCP/IP protocol. Refer to the a ppropriate section in this chapter for more information. Windows ® 2000/XP Printing (Printer Driver not yet installed) By default, W ...
NETWORK PRINTING FROM WINDOWS ® (Peer to Peer) 4 - 3 NC9100h_FM6.0 9 Windows ® 2000/XP will now contact the printer that you specified. If you did no t specify the correct IP address or na me then you will receive an error message. 10 Click the Finis h button to complete the Wizard. 11 Now that you have configured the port, you must specify which ...
4 - 4 NETWORK PRINTING FROM WINDOWS ® (Peer to Peer) NC9100h_FM6.0 For Windows ® 98/Me users Overview Microsoft's Windows ® 98/Me operating systems feature built-in networking capabilities. These cap abilities allow a Windows ® PC to be configured as a client wo rkstation in a file server ba sed network environment. For smaller networks, W ...
NETWORK PRINTING FROM WINDOWS ® (Peer to Peer) 4 - 5 NC9100h_FM6.0 TCP/IP Printing Brother’s Peer to Peer printing softw are requires the TCP/IP protocol to be installed on your Windows ® peer-to-peer computers and an IP Address has to be defined for the Print /Scan server. Refer to your Windows ® documentation for more information on how to c ...
4 - 6 NETWORK PRINTING FROM WINDOWS ® (Peer to Peer) NC9100h_FM6.0 7 You must now enter the actual IP ad dress of the Print/Scan server in the Printer name or IP address field. If you have edited the hosts file on your compu ter or are using Domain Name System, you can also enter the name of the print server. As the Print/Scan server supports TCP/ ...
NETWORK PRINTING FROM WINDOWS ® (Peer to Peer) 4 - 7 NC9100h_FM6.0 7 Select the Brother LPR port (the port name you assigned in step 6 of the “Installing the Brother Peer to Peer Software” on page 4- 5 ) and press Next . 8 Enter any desired name for the Brother prin ter and press Next . For example, you could call the p rinter “Networked Bro ...
5 - 1 NETWORK PRINTING FROM MACINTOSH® 5 NC9100h_FM6.0 5 Network Printing from Macintosh ® TCP/IP Printing for Macintosh ® This chapter explains how to print from Macintosh ® on a Network. For more information on how to config ure the default Quick Draw driver on a Network, see the Quick Se tup Guide included with the machine. Printing from a M ...
NETWORK PRINTING FROM MACINTOSH® 5 - 2 NC9100h_FM6.0 1 Run the Print Center software and click Add . 2 Select Rendezvous (may be changed in the future version of the Mac OS ® X) and any Simple Network Configuration compatible machines will be displayed. ...
5 - 3 NETWORK PRINTING FROM MACINTOSH® NC9100h_FM6.0 3 Select the machine and click the Add button. 4 Click the machine and click the Make Default button to set the printer as the default printer.The machine is now ready to print. ...
TROUBLESHOOTING 6 - 1 6 NC9100h_FM6.0 6 Troubleshooting Overview This chapter describes procedures for tr oubleshooting problems you may encounter with a Brother Print/Sca n server, it is divided into the following sections: 1 Installation Problems 2 Intermittent Problems 3 Protocol-Specific Troubleshooting Installation problems If you cannot print ...
6 - 2 TROUBLESHOOTING NC9100h_FM6.0 2 If the configuration page prints bu t you cannot print documents, try the following a If you are using TCP/IP: Try pinging the Print/Scan server from the host operating system command prompt with the command: ping ipaddress Where ipaddress is the Print/Scan server IP address (note that in some instances it can ...
TROUBLESHOOTING 6 - 3 NC9100h_FM6.0 5 If you have a bridge or r outer located between the Print/Sca n server and host computer, make sure that the device is set up to allow the Print/Scan server to send and receive data from the host. For example, a bridge can be set up to only allow certain types of Ethernet addresses to pass through (a process kn ...
6 - 4 TROUBLESHOOTING NC9100h_FM6.0 1 The problem may be the result of misma tched or duplicate IP addresses. Verify that the IP address is correctly loa ded into the Print/Scan server (via the configuration page. Make sure that no other nodes on the networ k have th is address (DUPLICATE IP ADDRESSES ARE THE BIGGEST CAUSE OF TCP/IP PRINTING PROBLE ...
BROTHER INTERNET FAX PRINTING SOFTWARE 7 - 1 7 NC9100h_FM6.0 7 Brother Internet Fax Printing Software (FAX-1940C/MFC-3340CN/ MFC-5440CN/MFC-5840CN only) Overview Depending on your network configuration and applica tion requirements for sending faxes via a network, you can choose between Brother Network PC FAX Software or Brother Internet Fax Printi ...
7 - 2 BROTHER INTERNET FAX PRINTING SOFTWARE NC9100h_FM6.0 Installing Brother Intern et Fax Printing Driver Insert the CD-ROM supplied with your Brother machine in to your CD- ROM Drive. The installer scr een will automatically start. 1 Select Install Optional Applications . 2 Select Brother Internet Fax Printing (BFP) Dri ver . Next you will be pr ...
BROTHER INTERNET FAX PRINTING SOFTWARE 7 - 3 NC9100h_FM6.0 During the installation you are present ed with the following screen, select the default unless you have pr eviously installed this software. If this is the case use a port numbe r that has not been previously configured. Example BFP2 You also need to enter certain information into the prin ...
7 - 4 BROTHER INTERNET FAX PRINTING SOFTWARE NC9100h_FM6.0 Changing the BFP Port Settings If you have more than o ne networked machine with this Print/Fax Server you may want to change the setting s of the BFP software to use an alternative machine as the network fax p rint server. To alter BFP settings, select Start | Printers and Faxes to open th ...
BROTHER INTERNET FAX PRINTING SOFTWARE 7 - 5 NC9100h_FM6.0 The following screen shows the current configuration. To alter this configuration, press the Configure Po rt... key. From the Configure Port... dialogue box you can change the settings. Relay Broadcast Function Before you can successfu lly use this machine as a network fax solution you need ...
7 - 6 BROTHER INTERNET FAX PRINTING SOFTWARE NC9100h_FM6.0 is known as setting the “Trusted Domain”. For instance , if a network machine has an E-mail address of fa x@brother.com and users of this machine also have E-mail addresses with the same do main name then the machine mu st be told to allow these users to sen d network faxes through the ...
BROTHER INTERNET FAX PRINTING SOFTWARE 7 - 7 NC9100h_FM6.0 Uninstalling from Windows ® 98/Me/2000/XP Select Start | Control Panel and then d ouble click the Add or Remove programs icon. From the list of installed programs select the Brother Internet Fax Vx.xx as sho wn below then click the Add/ Remove button. In the case of Windows ® 2000/XP you ...
7 - 8 BROTHER INTERNET FAX PRINTING SOFTWARE NC9100h_FM6.0 In addition to this you also need to manually remove the Brother Internet Fax Driver from the printers list. To do this select Start | Printers and Faxes you are then presented with the Window illustrated below. Right click the Brother Internet Fax , from the list click Delete . Accept the ...
BROTHER INTERNET FAX PRINTING SOFTWARE 7 - 9 NC9100h_FM6.0 Using the BFP Address Book This utility can administer the Fax addr esses, Internet Fax addresses and E-mail address of all t he contacts that you wish to use with the BFP Software. Additionally you can create Groups of con tacts that you may wish to broadcast documents to. From the Start m ...
7 - 10 BROTHER INTERNET FAX PRINTING SOFTWARE NC9100h_FM6.0 Setting Up a Member in the Address Book In the Brother Address Book dialog box you can add, edit and delete stored information fo r members and groups. 1 In the Address Book dialog box, click the icon to add a member. The Brother Address Book Member Se tup dialog box will appear: 2 In the ...
BROTHER INTERNET FAX PRINTING SOFTWARE 7 - 11 NC9100h_FM6.0 Setting Up a Group for Br oadcasting If you repeatedly send the same PC-FAX to multiple re cipients, you can combine members into a Group. 1 In the Brother Address Book dialog box, click the icon to create a group. The Brother Addres s Book Group Setup dialog box ap pears: 2 Type the name ...
7 - 12 BROTHER INTERNET FAX PRINTING SOFTWARE NC9100h_FM6.0 Editing Member Information To edit a Member or Group: 1 Select the Member or Group you want to edit. 2 Click the Edit icon. 3 Edit the Member or Group information. 4 Click OK to save your changes. Deleting a Member or Group To delete a Member or Group: 1 Select the Member of Group you want ...
BROTHER INTERNET FAX PRINTING SOFTWARE 7 - 13 NC9100h_FM6.0 Sending a Network Fax with BFP From the application you wish to send the document from select File | Print. Ensure that the Brother I nternet Fax is selected as shown below. Clicking Print and the BFP dialogue box will be displayed. From this dialogue box you can either specif y an address ...
A - 1 APPENDIX A NC9100h_FM6.0 A Appendix Appendix A General Information You can change the conf iguration of your Print/Scan server u sing any of the following methods. • Bro ther BRAdmin Professional ut ility for Window s ® 98/Me and Windows ® 2000/XP • Bro ther Web BRAdmin Profe ssional utility for IIS * BRAdmin Professional utility (Recom ...
APPENDIX A - 2 NC9100h_FM6.0 Using Services General A service is a resource that can be accessed by computers that wish to print to the Brother Print/Scan server. The Brother Print/Scan server provides the following predefin ed services (do a SHOW SERVICE command in the Brother Print/Scan serve r remote console to see a list of available services): ...
A - 3 APPENDIX NC9100h_FM6.0 Appendix B Updating other machines through the Network (Windows ® only) It is possible to program a Brother machine on the network with either settings from an already programmed machine or with data from the Brother PC-FAX Address Book. (S ee Software User’s Guide chapt er 5) When Brother PC-FAX is used from a PC th ...
APPENDIX A - 4 NC9100h_FM6.0 When you select this option BRAd min reads th e telephone settings from that machine (if there a re any programmed) into Brother PC- FAX Address Book. Illustrated below is a screenshot of the Brothe r PC-FAX Address Book dialog box. The left side of the dialog box displays t he One- Touch / Speed-Dial numbers read from ...
A - 5 APPENDIX NC9100h_FM6.0 A dialog box is displayed showing the upload statu s of the current machine and beneath this the whole progress is displayed if updating multiple machines. When the process is finished a dia log box is displayed showing which machine on the network has b een updated. ...
APPENDIX A - 6 NC9100h_FM6.0 Appendix C Specifications Operating System Support Windows ® 98/98SE/ Me and Wind ows ® 2000/XP Mac OS ® 8.6-9.2 / Mac OS ® 10.2.4 or greater Protocol Support TCP/IP (includi ng the fol lowing) - RARP, BOOTP, DHCP, APIPA, NetB IOS Name Resolution, WINS, DNS Resolver, LPR/LPD, Port9 100, mDNS, TELNET, SNMP, TFTP Netw ...
A - 7 APPENDIX NC9100h_FM6.0 Network Scanning Computer Requirements (for drivers, BRAdmin Professional, Peer-to-Peer software, etc.) CPU - Pentium 75MHz or Higher for Windows ® 98/98SE - Pentium 150MHz or Higher for Windows ® Me - Pentium 133MHz or Higher for Windows ® 2 000 - Pentium 233MHz or Higher for Windows ® XP RAM - 24MB or greater (32M ...
APPENDIX A - 8 NC9100h_FM6.0 For Macintosh ® connection Computer - Ethernet ready Power Mac intosh ® RAM - 32MB or more (64MB or more recomme nded) for Mac OS ® 8.6-9.2 - 128MB or more (160MB or mo re recommended) for Mac OS ® X 10.2.4 or greater OS -M a c O S ® 8.6-9.2 / Mac OS ® X 10.2 .4 or greater Management Utilities BRAdmin Professional ...
A - 9 APPENDIX NC9100h_FM6.0 Function Table and Factor y Default Settings *1: The factory setting for the ‘IP Addr ess’ and ‘Subnet Mask’ setting may be changed by the APIPA setting. LEVEL ONE LEVEL TWO LEVEL THREE OPTIONS OPTIONS FA C T O R Y DEF AUL T 5.LAN ( 4.LAN for MFC- 5440CN) 1.Setup TCP/IP 1.BOOT Method Auto/ Static/ RARP/ BOOTP/ D ...
INDEX I - 1 NC9100h_FM6.0 1 INDEX A Address Book .............. 7-9 , A-3 Address Book Group ......... 7-11 APIPA ................... 2-1 , 2-4 , 3-9 B BFP ..................................... 7-1 BFP Port ............................. 7-4 BINARY_P1 ........................ A-2 BOOT Method ..................... 3-2 BOOTP .......................... ...
I - 2 INDEX NC9100h_FM6.0 Server Password ................ 4-1 Simple Network Configuration ........................................... 5-1 Subnet Mask ............... 1-2 , 3-6 T TCP/IP ......................... 1-1 , 3-2 TCP/IP Printing ................... 4-5 TCP/IP Printing for Macintosh® ........................................... 5-1 TCP/IP ...
Brother NC-110Hのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- NC-110Hの取扱説明書
- Brotherの製品カード
- パンフレット
- またはBrother NC-110Hの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Brother NC-110Hの取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Brother NC-110Hの取り付け説明書、サービスマニュアル、簡易説明書、またはBrother NC-110Hのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Brother NC-110Hの製品を使用するにあたって最も人気のある説明書を閲覧できます。
Brother NC-110Hデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがBrother NC-110Hを使用するのを助ける技術的文書のことです。説明書は通常、全てのBrother NC-110Hユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Brotherの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Brother NC-110Hの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははBrother NC-110Hの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Brother NC-110Hに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Brother NC-110Hデバイスの基本機能を使うにあたってのヒント。 Brother NC-110Hのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Brother NC-110Hに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるBrother NC-110Hのメーカー/サービスへの連絡先に関する情報。
Brother NC-110Hについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもBrother NC-110Hの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBrother NC-110Hで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。