-
Graco Monark 236-065 - page 1
308–332 Rev . D Supersedes Rev . C and PCN D First choice when quality counts. INSTRUCTIONS-P ARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. ST AINLESS STEEL, 15:1 RA TIO Monark Sprayers 2700 psi (18.5 MPa, 185 bar) Maximum Fluid Working Pressure ...
-
Graco Monark 236-065 - page 2
T able of Contents W arnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parts 10 . . . . . . . . . . . . . . . . . . ...
-
Graco Monark 236-065 - page 3
INJECTION HAZARD Spray from the gun, hose leaks, or ruptured components can inject fluid into your body and cause extremely serious injury , including the need for amputation. Fluid splashed into the eyes or onto the skin can also cause serious injury . Fluid injected into the skin might look like just a cut, but it is ...
-
Graco Monark 236-065 - page 4
4 308-332 FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames, or sparks can cause a hazardous condition and result in a fire or explosion and serious injury . Ground the equipment and the object being sprayed. Refer to Grounding on page 5. If there is any static sparking or you feel an electric shock while using thi ...
-
Graco Monark 236-065 - page 5
5 308-332 Installation Grounding W ARNING FIRE AND EXPLOSION HAZARD Before operating the pump, ground the system as explained below . Also read the section FIRE AND EXPLOSION HAZARD on page 4. T o reduce the risk of static sparking, ground the pump. Check your local electrical code for detailed grounding instructions for your area and type of equip ...
-
Graco Monark 236-065 - page 6
6 308-332 Installation Be sure that all operators read and understand this entire manual and the separate manuals supplied with components and accessories before using this equip - ment. Reference numbers and letters in parentheses refer to the figures and the parts lists on pages 10–13. Accessories mentioned are available from your Graco distrib ...
-
Graco Monark 236-065 - page 7
7 308-332 Installation Fig. 3 KEY A Pump B Bleed-T ype Master Air V alve (required for pump) C Air Supply Line D Master Air V alve (for accessories) E Air Line Filter F Pump Air Regulator G Gun Air Regulator H Fluid Drain V alve (required) J Fluid Suction Line K Fluid Filter L Gun Fluid Supply Hose M Gun Air Supply Hose N Air-Assisted Airless Spray ...
-
Graco Monark 236-065 - page 8
Operation Pressure Relief Procedure W ARNING INJECTION HAZARD Fluid under high pressure can be in - jected through the skin and cause serious injury . T o reduce the risk of an injury from injection, splashing fluid, or moving parts, follow the Pressure Relief Procedure whenever you: are instructed to relieve the press ...
-
Graco Monark 236-065 - page 9
Fig. 4 W all Mount Pumps (Model 236–065) 16 21 34 6 10a 10b 29 Pail Mount Pumps (Model 236–069) 10a 29 10b 6 16 40 1 42 Operation Slowly open the pump air regulator (10b) until the pump starts. Run the pump slowly until fluid comes from the drain valve (6). Close the drain valve and continue to run the ...
-
Graco Monark 236-065 - page 10
10 308-332 Parts Part No. 236–065 W all Mount Pump with Fluid Regulator Includes items 1–50 Part No. 236–898 W all Mount Pump without Fluid Regulator Includes items 1–28, 43–50 02802A 1 See Detail at left. 1 2 5 6 7 8 9 10 1 1 12 13 13 (REF) 14 15 16 17 18 19 39 (REF) 20 21 22 23 24 25 26 29 30 31 32 33 34 35 36 25 38 39 47 43 1 1 44 45 2 ...
-
Graco Monark 236-065 - page 11
11 308-332 Parts Part No. 236–065 W all Mount Pump with Fluid Regulator Includes items 1–50 Part No. 236–898 W all Mount Pump without Fluid Regulator Includes items 1–28, 43–50 Ref. No. Part No. Description Qty . Ref. No. Part No. Description Qty . 1 186–727 BRACKET , wall mounting 1 2 223–844 MONARK PUMP; stainless steel See 308–10 ...
-
Graco Monark 236-065 - page 12
12 308-332 Parts Part No. 236–069 Pail Mounted Pump with Fluid Regulator Includes items 1–50 Part No. 236–900 Pail Mounted Pump without Fluid Regulator Includes items 1–28, 33, 40–50 2 8 9 Apply thread sealant to male threads, except at swivel connections. 1 5 6 7 10 12 13 (REF) 13 14 16 18 19 21 23 24 25 27 28 ...
-
Graco Monark 236-065 - page 13
13 308-332 Parts Part No. 236–069 Pail Mounted Pump with Fluid Regulator Includes items 1–50 Part No. 236–900 Pail Mounted Pump without Fluid Regulator Includes items 1–28, 33, 40–50 Ref. No. Part No. Description Qty . Ref. No. Part No. Description Qty . 1 236–244 COVER, pail; stainless steel 1 2 223–844 MONARK PUMP; stainless steel S ...
-
Graco Monark 236-065 - page 14
14 308-332 Notes ...
-
Graco Monark 236-065 - page 15
15 308-332 T echnical Data Category Data Maximum working pressure 2700 psi (18.5 MPa, 185 bar) Maximum incoming air pressure 180 psi (1.25 MPa, 125 bar) Ratio 15”1 W etted parts: Pump See manual 308–106 W etted parts: Fluid Hose Nylon W etted parts: Fluid Filter See manual 307–273 W etted parts: Suction Hose and T ube Nylon, 304, Stainless St ...
-
Graco Monark 236-065 - page 16
16 308-332 Graco W arranty Graco warrants all equipment listed in this manual which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special extended or limited warranty published by Gr ...
Graco Monark 236-065についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもGraco Monark 236-065の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがGraco Monark 236-065で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。