Porter-Cable 126の取扱説明書

16ページ 0.26 mb
ダウンロード

ページに移動 of 16

Summary
  • Porter-Cable 126 - page 1

    POR T A-PLANE ® PLANER MODEL 126 Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference. Model No. ______________________________________ Type ___________________________________________ Serial No. _______________________________________ ...

  • Porter-Cable 126 - page 2

    Read and understand all warnings and operating instructions before using any tool or equipment. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are c ...

  • Porter-Cable 126 - page 3

    Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: z lead from lead-based paints z crystalline silica from bricks and cement and other masonry products ...

  • Porter-Cable 126 - page 4

    Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS 1) Work area safety a) Keep work are ...

  • Porter-Cable 126 - page 5

    d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose cl ...

  • Porter-Cable 126 - page 6

    6 ADDITIONAL SPECIFIC SAFETY RULES 1. Wait for the cutter to stop before setting the tool down. An exposed cutter may engage the surface leading to possible loss of control and serious injury. 2. Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and ...

  • Porter-Cable 126 - page 7

    7 SYMBOL DEFINITION V ........................ volts A ........................ amperes Hz ........................ hertz W ........................ watts kW ........................ kilowatts F ........................ farads µ F ........................ microfarads l ........................ litres g ........................ grams kg ........... ...

  • Porter-Cable 126 - page 8

    8 If an extension cord is used, make sure the conductor size is large enough to prevent excessive voltage drop which will cause loss of power and possible motor damage. A table of recommended extension cord sizes will be found in this section. This table is based on limiting line voltage drop to 5 volts (10 volts for 230 volts) at 150% of rated amp ...

  • Porter-Cable 126 - page 9

    9 FUNCTIONAL DESCRIPTION ASSEMBL Y CARTON CONTENTS 3) Replacement Parts List 4) Combination Package OPERA TION A D B C Fig. 2 FOREWORD Model 126 is a 7.0 amp, 22,000 RPM portable planer that can plane wood up to 2-13/32" wide and 3/32" deep. NOTE: This tool is shipped completely assembled. No assembly time or tools are required. 1. Turn t ...

  • Porter-Cable 126 - page 10

    10 2. The cutter adjusting lever (C) Fig. 4 is located to the left of the handle directly behind the motor housing. Turn this lever to the position shown in Fig. 4. 3. Place a straight edge across the cutter opening (Fig. 5), so that it rests on both the front and rear shoe. Turn the cutter by hand until it lifts the straight edge to its maximum he ...

  • Porter-Cable 126 - page 11

    HOW TO USE THE PORT A-PLANE ® MAKING THE CUT To provide maximum control of the tool, hold the planer with the right hand on the handle and the left hand on the front of the motor housing (Fig. 7). Rest the thumb on the depth adjusting lever and wrap the fingers around the motor housing. The position of the plane on the work is important in obtaini ...

  • Porter-Cable 126 - page 12

    12 ADJUSTMENTS FITTING A DOOR Carefully fit doors to the jambs with ample clearance to ensure free movement. The 126 Plane is ideally suited for this job. New doors delivered from the supplier have squared edges along two sides (stiles), and lugs extending at the top and bottom beyond the rails. Plane the hinged side with a slight angle to the insi ...

  • Porter-Cable 126 - page 13

    13 Do not pinch the wires! ADJUSTING THE CUTTER-ADJUSTING LEVER TENSION Each time the blade is sharpened, the plane must be reset to “0” so that the depth adjusting lever can accurately measure the depth of cut. If the cutter adjusting lever is too tight or too loose, adjust it immediately to the proper tension. Remove the five handle-cover ret ...

  • Porter-Cable 126 - page 14

    14 MAINTENANCE KEEP TOOL CLEAN Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material. Wear ANSI Z87.1 safety glasses while using compressed air. F AILURE TO ST ART Should your ...

  • Porter-Cable 126 - page 15

    15 A complete line of accessories is available from your Porter-Cable  Delta Supplier, Porter-Cable  Delta Factory Service Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter-cable.com for a catalog or for the name of your nearest supplier. Since accessories other than those offered by Porter-Cable • ...

  • Porter-Cable 126 - page 16

    16 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material du ...

メーカー Porter-Cable カテゴリー Planer

Porter-Cable 126のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 126の取扱説明書
- Porter-Cableの製品カード
- パンフレット
- またはPorter-Cable 126の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Porter-Cable 126の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Porter-Cable 126の取り付け説明書、サービスマニュアル、簡易説明書、またはPorter-Cable 126のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Porter-Cable 126の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Porter-Cable 126デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPorter-Cable 126を使用するのを助ける技術的文書のことです。説明書は通常、全てのPorter-Cable 126ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Porter-Cableの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Porter-Cable 126の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPorter-Cable 126の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Porter-Cable 126に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Porter-Cable 126デバイスの基本機能を使うにあたってのヒント。 Porter-Cable 126のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Porter-Cable 126に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPorter-Cable 126のメーカー/サービスへの連絡先に関する情報。

Porter-Cable 126についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPorter-Cable 126の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPorter-Cable 126で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)