-
Bounty Hunter 2200 - page 1
OWNER’S MANUAL The Discovery 2200 is a professional metal detector . While the most difficult aspects of metal detecting have been automated, it is a sophisticated electronic device which requires an understanding of some basic features and metal detecting concepts. If you do not have prior experience with a metal detector , we strongly recommend ...
-
Bounty Hunter 2200 - page 2
2 T ABLE OF CONTENTS T erminology . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Quick-Start Demo . . . . . . . . . . . . . . . . . . . . . 7-8 Basic Operation . . . . . . . . . . . . . . . . . . . . .9-12 ...
-
Bounty Hunter 2200 - page 3
3 TERMINOLOGY The following terms are used throughout the manual, and are standard terminology among detectorists. ELIMINA TION Reference to a metal being "eliminated" means that the detector will not emit a tone, nor light up an indicator , when a specified object passes through the coil’ s detection field. DISCRIMINA TION When the det ...
-
Bounty Hunter 2200 - page 4
4 ASSEMBL Y Assembly is easy and requires no tools. ● 1 Position the lower stem (the straight tube) with the silver button toward the back. Using the bolt and knurled knob, attach the search coil to the plastic extension protruding from the lower stem. ● 2 Press the button on the upper end of the lower stem, and slide the lower stem into the up ...
-
Bounty Hunter 2200 - page 5
5 ASSEMBL Y SE N S IT IV ITY D IS C R IM IN A TIO N Adjusting the Arm Rest Most people will find the standard position of the arm rest very comfortable. V ery large forearms and short forearms (particularly children’ s arms), can be accommodated by moving the arm rest forward. The arm rest is adjustable to three positions. To adjust, remove the s ...
-
Bounty Hunter 2200 - page 6
6 Use ALKALINE batteries only . To install the batteries: ● 1 Remove the battery cover by disengaging the clip at the back. ● 2 Align the polarity of the batteries correctly , with the positive "+" toward the coil plug connection, as indicated by the + and – indicators on the housing. ● 3 Insert (2) 9-V olt ALKALINE batteries, wit ...
-
Bounty Hunter 2200 - page 7
7 Q UICK-ST AR T DEMONSTRA TION I. Supplies Needed • A Nail • A Quarter • A Pull-T ab from a beverage can • A Zinc Penny (dated after 1982) II. Position the Detector a. Place the detector on a table, with the search coil hanging over the edge. (or better , have a friend hold the detector , with the coil off the ground) b. Keep the search co ...
-
Bounty Hunter 2200 - page 8
8 VI. W ave the Nail over the Search Coil a. The Nail will not be detected. b. The Nail has been "Discriminated Out." VII. Press the “DISCRIMINA TION- ▲ ” touchpad twice. Three “R”s are now displayed. VIII. W ave all objects over the Search Coil The Nail and Pull-T ab will not be detected. The other objects will be detected with ...
-
Bounty Hunter 2200 - page 9
9 BASIC OPERA TION POWERING UP Press the POWER touch pad. • The detector will beep 4 times • All display segments will illuminate momentarily • The SENSITIVITY and BA TTERY indicators will stay illuminated SENSITIVITY The detector’ s default sensitivity will be indicated with two segments. At this setting, the detector will detect a coin-si ...
-
Bounty Hunter 2200 - page 10
10 DEF AUL T OPERA TION The detector defaults to ALL MET AL mode after powering on. In this mode, all types of metals will be detected. An object’ s probable identification is indicated by the arrows at the top of the display . In addition, the probable depth of coin-sized objects is indicated by the large numeric indicator in the center of the d ...
-
Bounty Hunter 2200 - page 11
11 To increase the level of discrimination, press the DISCRIMINA TION ▲ touch pad. Each time the ▲ pad is depressed, an additional "R" will appear , thus eliminating from detection the objects which fall into the corresponding categories. To decrease the level of discrimination, press the DISCRIMINA TION ▼ touch pad. Each time the ? ...
-
Bounty Hunter 2200 - page 12
12 BASIC OPERA TION continued ZAP The ZAP control is a convenient way to eliminate a known undesirable metal object from detection. To demonstrate the ZAP control: 1) Set the detector in All-Metal Mode Note: ZAP functions in all modes, but is best demonstrated first from the All-Metal Mode. 2) Pass the search coil over an undesirable object. 3) Not ...
-
Bounty Hunter 2200 - page 13
13 AUDIO T ARGET IDENTIFICA TION While the LCD (Liquid Crystal Display) is very accurate in identifying buried objects, the user in the field does not always maintain the display screen in his field of vision. Therefore, we have incorporated an audio feedback mechanism to alert the user to the nature of buried objects. This audio feedback system fi ...
-
Bounty Hunter 2200 - page 14
14 DEPTH AND T ARGET DISPLA Y READING THE DISPLA Y The Liquid Crystal Display (LCD) shows the PROBABLE identification of the targeted metal, as well as the PROBABLE depth of the target, in inches. The detector will register a repeated, unchanging target identification when a buried target has been located and identified. If, upon repeated passes ov ...
-
Bounty Hunter 2200 - page 15
15 ELECTROMAGNETIC INTERFERENCE The principle use for the Sensitivity Control is to eliminate Electromagnetic Interference (EMI). A hobby metal detector is an extremely sensitive device; the search coil creates its own magnetic field and acts like an antenna. If your detector beeps erratically when the search coil is motionless, the unit is probabl ...
-
Bounty Hunter 2200 - page 16
16 IN THE FIELD TECHNIQUES When pinpointing a target, try drawing an “X”, as illustrated, over where the tone is induced. PINPOINTING Accurate pinpointing takes practice and is best accomplished by “X-ing” the target area. 1. Once a buried target is indicated by a good tone response, continue sweeping the coil over the target in a narrowing ...
-
Bounty Hunter 2200 - page 17
17 Swing the search coil slowly , overlapping each sweep as you move forward. It is important to sweep the coil at a consistent speed over the ground as you search. After identifying a target, your sweep technique can help in identifying both the location and the nature of the target. If you encounter a weak signal, try moving the coil in short, ra ...
-
Bounty Hunter 2200 - page 18
18 angles, you many have encountered multiple objects. If you are new to the hobby , you may want to dig all targets at first. With practice in the field, you will learn to better discern the nature of buried objects by the nature of the detector’ s response. Y ou may encounter some false signals as you proceed. False signals occur when the detec ...
-
Bounty Hunter 2200 - page 19
19 TROUBLE SHOOTING GUIDE SYMPTOM CAUSE SOLUTION Detector chatters • Using detector • Use detector or beeps erratically indoors outdoors only • Using detector near • Move away power lines from power lines • Using 2 detectors in • Keep 2 detectors close proximity at l east 20’ apart • Highly oxidized • Only dig up buried object rep ...
-
Bounty Hunter 2200 - page 20
TREASURE HUNTER’S CODE OF ETHICS: 1 . Respect the rights and property of others. 2 . Observe all laws, whether national, state or local. 3 . Never destroy historical or archaeological treasures. 4 . Leave the land and vegetation as it was. Fill in the holes. 5 . All treasure hunters may be judged by the example you set. Always obtain permission b ...
Bounty Hunter 2200についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもBounty Hunter 2200の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBounty Hunter 2200で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。