Sangean Electronics DDR-31+の取扱説明書

36ページ 0.74 mb
ダウンロード

ページに移動 of 36

Summary
  • Sangean Electronics DDR-31+ - page 1

    GB ...

  • Sangean Electronics DDR-31+ - page 2

    1 Contents Controls ................................................................................. 2-4 Mains operation ....................................................................... 5 Operating your ra dio ............................................................... 6 Selecting a station – DAB ...................................... ...

  • Sangean Electronics DDR-31+ - page 3

    2 GB Controls (front) 7. Adva nced / INFO button 8. Infra-red sensor 9. V olume knob 10. On / Sta ndBy button 1 1. T uning control / Sele ct knob 12. Preset buttons 1. Loudspea ker 2. Light button 3. Ba nd button 4. Auto tune button 5. Alarm button 6. LCD display ...

  • Sangean Electronics DDR-31+ - page 4

    3 Controls (re ar) 13. T elescopic aeri al for DAB+ / FM 14. USB socket for software upgrade 15. DC power in socket 16. Headphone socket 17. Line Out socket 18. Auxiliary input socket ...

  • Sangean Electronics DDR-31+ - page 5

    4 GB Controls (re mote control) A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. Note: For the sa ke of clarity , the instructions f or the use of the controls throughout this instruction ma nual show the buttons on the remote control. The button s on the clock radio ca n be used if you prefer . Note: The operations de scribed below f or the pa nel are ...

  • Sangean Electronics DDR-31+ - page 6

    5 Mains operation 1. Pla ce your clock radio on a flat surfa ce. 2. Plug the mains lead into the Socket located on the rear of your clock radio ensuring that the plug is pushed fully into the socket. 3. Plug the other end of the mains lea d into a wall socket and switch on the wall socket. ...

  • Sangean Electronics DDR-31+ - page 7

    6 GB Operating your radio - DAB 1. Fully extend the telescopic aerial. Fully extend the telescopic aerial located on the rear of your clock radio. Pla ce the telescopic a ntenna so that it is a s vertical a s possible extending either above or below the radio. 2. Insert the ada ptor plug into the DC socket located on the rear of your clock radio. P ...

  • Sangean Electronics DDR-31+ - page 8

    7 Selecting a station - DAB 1. The top line of the display shows the n a me of the station currently selected. 2. Press the Tuning Up or Down buttons to scroll through the list of available stations. Stop pressing the T uning Up or Down buttons when you find the station that you wish to hear. 3. Press a nd relea se the Select button to select the s ...

  • Sangean Electronics DDR-31+ - page 9

    8 GB Display mode s – DAB Y our clock radio ha s a range of display modes:- 1. Press a nd relea se the Info button to cycle through the various mode s. Displays scrolling text message s such as artist/tra ck na me, phone in number etc. Displays a gra ph showing the signal strength for the station being received. Displays the type of station being ...

  • Sangean Electronics DDR-31+ - page 10

    9 Finding new radio station s – DAB As time pa sses new stations may become availa ble. T o find new stations proceed a s follows:- 1. With the ra dio switched on a nd in DAB mode, pre ss a nd relea se the Auto Tune button. The display will show “Scanning...” a nd your clock radio will perf orm a sca n of the Band III DAB cha nnels. As new ra ...

  • Sangean Electronics DDR-31+ - page 11

    10 GB M a nual T uning – DAB Ma nual tuning allows you to tune your clock radio to a particular DAB frequency . Any new stations found will be a dded to the station list. Note that DAB stations are located in the ra nge of 5A-13F . 1. With the ra dio switched on a nd in DAB mode, press a nd relea se the Adva nced button, the display shows “Ma n ...

  • Sangean Electronics DDR-31+ - page 12

    11 Dyn a mic Ra nge Control (DRC) - DAB The D RC fa cility can ma ke quieter sound ea sier to hear when your radio is used in a noisy environment. There are three levels of DRC compre ssion, DRC off: DRC is switched off, broa dca st DRC will be ignored. DRC high: DRC is set a s sent by broadca ster . DRC low: DRC level is set to 1/2 that sent by br ...

  • Sangean Electronics DDR-31+ - page 13

    12 GB Operating your radio – FM auto-tune 1. Fully extend the aerial located on the rear of your clock radio. Pla ce the antenn a so that it is an straight a s possible, extending either above the radio. 2. Press a nd relea se the On / StandBy button to switch on your clock radio. 3. Press a nd relea se the Ba nd button to sele ct the FM band. 4. ...

  • Sangean Electronics DDR-31+ - page 14

    13 Display mode s – FM In FM mode the bottom line of the display ca n be set to a ny of the following display options:- 1. Press a nd relea se the Info button to cycle through e a ch of the options. Note: Y our clock radio will display “NO Radio T ext” on the lower line of the display if there is no scrolling text available a nd “NO PTY” ...

  • Sangean Electronics DDR-31+ - page 15

    14 GB Pre setting station s - DAB a nd FM There are 5 memory presets on the pa nel for ea ch of the 2 waveba nds. However , There are 10 me mory presets on the re mote control for ea ch of the 2 waveba nds. 1. Press a nd relea se the On / Sta ndBy button switch on the ra dio. 2. T une to the required station a s previously described. 3. Press a nd ...

  • Sangean Electronics DDR-31+ - page 16

    15 Sca n sen sitivity setting Y our radio will normally sca n for FM broadca sts which are strong enough to give good reception. However , you may wish the Sca n function to also be able to f ind we a ker signals, possible from more dista nt ra dio tra n smitters. Y our radio include s a local / dista nt option for the Sca n function in the FM ba n ...

  • Sangean Electronics DDR-31+ - page 17

    16 GB Stereo / Mono setting – FM Y our clock radio will play stereo broadca sts in stereo (via headphone s) so long a s the received sign al is of adequate strength. However , a s a stereo signal become s we a ker , the audio signal will become poorer . It may be preferable to force the radio to play the station in mono in order to reduce the lev ...

  • Sangean Electronics DDR-31+ - page 18

    17 Clock display 1. When your clock ra dio is in Standby mode, the display normally show the current time, date, month a nd year . 2. During Sta ndBy mode the clock will rece ive update s from the la st station tuned to before entering Sta ndBy mode. When in Sta ndBy mode your radios clock will automatically tra ck Summer / Winter time cha nges. ...

  • Sangean Electronics DDR-31+ - page 19

    18 GB Setting the time a nd the date ma nually The DDR-31 Plus will automatically set its clock when tuned to a DAB radio station or to a n FM station which is broadca sting the time via RDS. If the clock ca nnot be set using DAB or FM ra dio then you will need to set the time a nd the date ma nually bef ore the alarm function ca n be used. The ti ...

  • Sangean Electronics DDR-31+ - page 20

    19 1 1. The hour digits on the display will fla sh. Press the T uning Up or Down buttons to change the hour digits a s needed. 12. Press a nd relea se the Select button to confirm the hour setting. 13. The minute digits on the display will fla sh. Press the T uning Up or Down buttons to change the minute digits a s needed. 14. Press a nd relea se t ...

  • Sangean Electronics DDR-31+ - page 21

    20 GB 20. Press a nd relea se the Select button to confirm the year a nd to complete the clock a nd date setting. The T ime/Date setting is stored in the radio. 21. Press the T uning Up or Down buttons to switch “Auto update”. 22. Press a nd relea se the Select button to enter the “Auto update“ menu. 23. Press the T uning Up or Down buttons ...

  • Sangean Electronics DDR-31+ - page 22

    21 25. Press the T uning Up or Down button s to switch “Set date f ormat”. 26. Press a nd relea se the Select button to enter the “Set date format“ menu. 27. Press the T uning Up or Down button s to switch the “Set date format “ mode. There are two “Set date f ormat“ modes a s DD-MM-YYYY a nd MM-DD-YYYY . 28. Press a nd relea se the ...

  • Sangean Electronics DDR-31+ - page 23

    22 GB Setting the alarm time s Y our clock radio ha s two alarms which ca n be set to wa ke you either radio or buzzer alarm. Ea ch alarm can be set to sound once, daily , on weekdays or at weekends. Note: If no buttons are pressed for 10 seconds, your clock radio will exit the alarm set up. 1. The alarm ca n be set either the radio is on or sta nd ...

  • Sangean Electronics DDR-31+ - page 24

    23 9. Press a nd relea se the Select button to confirm your selection. The alarm duration setting is stored in the radio. 10. The source digits on the display will fla sh. Press the T uning Up or Down buttons until the desired source is set. There are three “Source“ options a s FM, Buzzer and DAB. 1 1. If the alarm source buzzer is chosen, pres ...

  • Sangean Electronics DDR-31+ - page 25

    24 GB 17. The alarm day digits on the display will fla sh. Press the T uning Up or Down buttons until the desired the alarm day is set. There are four “Alarm day“ options a s Once, W eekends, W eekdays, a nd Daily . 18. Press a nd rele a se the Select button to confirm your selection. The alarm day setting is stored in the radio. 19. The lower ...

  • Sangean Electronics DDR-31+ - page 26

    25 22. Press a nd rele a se the Select button to confirm the alarm setup setting. The alarm setup setting is stored in the radio. 23. The display will show “Alarm saved” a nd will a ppear alarm symbol indicating the alarm is set. 24. Pres the T uning Up or Down buttons to select Off. The display will show “Alarm saved” but the display will ...

  • Sangean Electronics DDR-31+ - page 27

    26 GB Stop the alarm When alarm is a ctive, press the On / StandBy button to stop the alarm (radio a nd buzzer). Note: When alarm is a ctive, pre ss a ny button (except the On / Sta ndBy button)to enter into “5 minute s Snooze Mode”. Ca nceling alarms 1. Following above alarm setting procedures to allocate alarm On or Off, select OFF by pressin ...

  • Sangean Electronics DDR-31+ - page 28

    27 Slee p timer Y our clock radio ca n be set to turn off after a pre set ti me ha s ela psed. The sleep timer ca n be adjusted between 15 and 90 minutes in 15 minutes increments (except 75 minutes). Ensure your clock radio is switched on. 1. Press a nd hold down the Sleep button until desired sleep time a ppears on the display . Relea se the Sleep ...

  • Sangean Electronics DDR-31+ - page 29

    28 GB EQ function The sound on your sound system ca n be adjusted to suit your personal ta ste for the material that you are listening to. The DDR-31 plus ha s six preset equalizer modes. Alternatively , you may set the treble and ba ss levels to your own preferences. 1. Press a nd relea se repeatedly the EQ button to cycle through the various mode ...

  • Sangean Electronics DDR-31+ - page 30

    29 T reble control 1. Press the EQ button to cycle through the modes until “Treble” a ppears on the display . The current treble setting will be shown on the display. 2. T o adjust the treble setting press a nd relea se the Tuning Up or Down buttons until the desired level is displayed. Ba ss control 1. Press the EQ button to cycle through the ...

  • Sangean Electronics DDR-31+ - page 31

    30 GB Mute function Press the Mute button on the remote control of your radio, it will mute the output from the loudspea ker. 1. Press the Mute button to mute the sound output. The display will show “V olume Muted“. 2. Press the Mute button again or one of the V olume Up or Down buttons to un-mute the sound output. Display ba cklight dimmer 1. ...

  • Sangean Electronics DDR-31+ - page 32

    31 Fa ctory re set If your clock radio fails to operate correctly or some digits on the display are missing or incomplete, carry out the following procedures. 1. Press a nd relea se the On / StandBy button to switch on your clock radio. 2. Press a nd rele a se the Advanced button. When the D D R-31 Plus is tuned to a DAB radio station, the display ...

  • Sangean Electronics DDR-31+ - page 33

    32 GB Software version The software display ca nnot be altered a nd is just for your reference. Ensure your radio is switched on a nd in DAB or FM mode. 1. Press a nd relea se the On / StandBy button to switch on your clock radio. 2. Press a nd rele a se the Advanced button. When the DDR-31 Plus is tuned to a DAB radio station, the display will sho ...

  • Sangean Electronics DDR-31+ - page 34

    33 USB socket for software upgrade Software updates for your clock radio may be availabe in the future. As software updates become available software and information on how to update your radio can be found at www.sangean.com.tw/index_tw.asp , www.sangean.nl/English , or www.sangean.com.au. For more information, ple a se conta ct our Head Of fice b ...

  • Sangean Electronics DDR-31+ - page 35

    34 GB Line Out socket 1. A 3.5mm stereo Line Out socket is provided on the rear of your sound system to permit the audio signal to be fed to a n external a mplifier or other audio device. Cautions Do not allow this radio to be exposed to water , stea m or sa nd. Do not leave your ra dio where excessive heat could cause da mage such a s in a parked ...

  • Sangean Electronics DDR-31+ - page 36

    35 Specifications Power Requirements Mains: AC 100 240 volts, 50 Hz-60 Hz DC 12V 1A only (switching ad a ptor) Frequency Coverage FM 87.5 - 108MHz DAB 174.928 - 239.200MHz Circuit Fe ature s Loudspea ker: 3”, 8 ohm Output Power: 7 Watt Headphone socket: 3.5mm dia Auxiliary Input socket: 3.5mm dia Line out socket: 3.5mm dia Aerial System: FM T ele ...

メーカー Sangean Electronics カテゴリー Radio

Sangean Electronics DDR-31+のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- DDR-31+の取扱説明書
- Sangean Electronicsの製品カード
- パンフレット
- またはSangean Electronics DDR-31+の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Sangean Electronics DDR-31+の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Sangean Electronics DDR-31+の取り付け説明書、サービスマニュアル、簡易説明書、またはSangean Electronics DDR-31+のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Sangean Electronics DDR-31+の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Sangean Electronics DDR-31+デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSangean Electronics DDR-31+を使用するのを助ける技術的文書のことです。説明書は通常、全てのSangean Electronics DDR-31+ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Sangean Electronicsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Sangean Electronics DDR-31+の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSangean Electronics DDR-31+の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Sangean Electronics DDR-31+に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Sangean Electronics DDR-31+デバイスの基本機能を使うにあたってのヒント。 Sangean Electronics DDR-31+のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Sangean Electronics DDR-31+に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSangean Electronics DDR-31+のメーカー/サービスへの連絡先に関する情報。

Sangean Electronics DDR-31+についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもSangean Electronics DDR-31+の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSangean Electronics DDR-31+で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)