Cisco CATALYST 2960の取扱説明書

108ページ 14.69 mb
ダウンロード

ページに移動 of 108

Summary
  • Cisco CATALYST 2960 - page 1

    Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Catal yst 2960 S witc h Hardw are Installation Guide Marc h 20 1 0 Text Part Number: OL -7075-09 ...

  • Cisco CATALYST 2960 - page 2

    THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT T O CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION , AND RECOMMEN DATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPO NSIBILITY FOR THEIR APPLICAT ION OF ANY PRO ...

  • Cisco CATALYST 2960 - page 3

    iii Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 CONTENTS Preface vii CHAPTER 1 Product Overview 1-1 Features 1-1 Front Panel Description 1-4 Catalyst 2960 Switch 24- and 48-Port Switches 1-4 Catalyst 2960-24-S, 2960-24TC-S, 2960 -48TC-S, and 2960-48TT-S Switch es 1-4 Catalyst 2960-24PC-L, 2960-24P C-S, 2960-24LC -S, 2960-24TC-L, 296 ...

  • Cisco CATALYST 2960 - page 4

    Contents iv Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 CHAPTER 2 Switch Installation (24- and 48-Port Switches) 2-1 Preparing for Installation 2-1 Warnings 2-2 Guidelines for Particulate Matter 2-4 Installation Guidelines 2-4 Box Contents 2-5 Tools and Equipment 2-5 Verifying Switch Operation 2-5 Installing the Switch 2-6 Rack-Mo ...

  • Cisco CATALYST 2960 - page 5

    Contents v Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Desk- or Shelf-Mounting (without Mounting Screws) 3-6 Desk- or Shelf-Mounting (with Mounting Screws) 3-7 Under the Desk- o r Shelf-Mounting (with Mountin g Screws) 3-8 Wall-Mounting (with Mounting Scre ws) 3-11 Magnet Mounting 3-14 Rack-Mounting 3-15 Attaching Brackets to the Sw ...

  • Cisco CATALYST 2960 - page 6

    Contents vi Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Console P ort B-4 Cable and Adapter Specificatio ns B-4 SFP Modu le Cable Specifica tions B-4 Two Twisted-Pair Ca ble Pinouts B-6 Four Twisted-Pa ir Cable Pinouts for 1000BASE-T Ports B-6 Crossove r Cable and Ada pter Pinouts B-7 Identifying a Crossover Cable B-7 Adapter Pino ...

  • Cisco CATALYST 2960 - page 7

    vii Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Preface Audience This guide is for the n etworking or computer technician respon sible for installing the Catalyst 29 60 switch , hereafter known as the switc h. W e assume that you are f amiliar with the conc epts and terminology of Ethernet an d local area networking . If you are int ...

  • Cisco CATALYST 2960 - page 8

    viii Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Preface The safety warnings for this product are translat ed into se veral lang uages in the Re gulatory Compliance and Safety Information for the Catalyst 2960 S witch guide. The EMC regulato ry statements are also included in that guide. Related Documentation These documents pro v ...

  • Cisco CATALYST 2960 - page 9

    ix Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Preface • Cisco Redundant P ower System 2300 Har d war e Installati on Guide • Cisco RPS 675 Redundant P ower System Har dwar e Install ation Guide These compatibility matrix do cuments are av ailable fro m this Cisco.com site: http://www .cisco.com/en/ US/products/hw/modules/p s545 ...

  • Cisco CATALYST 2960 - page 10

    x Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Preface ...

  • Cisco CATALYST 2960 - page 11

    CH A P T E R 1-1 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 1 Product Overview The Catalyst 2960 switch— also refe rred to as the switc h —is an Ethernet switch to which you can connect devices such as workstations, Cisco W ireless Access Points, Cisco IP Phones, and other network devices including servers, routers, and other s ...

  • Cisco CATALYST 2960 - page 12

    1-2 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 1 Produ ct Overview Features The Catalyst 2960-8TC-S, 2960-8 TC-L, 2960G-8TC-L, and 2960PD-8TT -L switches are smaller tha n the other Cata lyst 2960 sw itches. They can be moun te d with a magnet, have secu rity lock slo ts, and do not hav e a fan. See “Catalyst 2960 8- Po ...

  • Cisco CATALYST 2960 - page 13

    1-3 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 1 Product Over view Features These are the SFP modules supported b y the switches: • 1000B ASE-CWDM • 1000B ASE-BX • 1000B ASE-LX/LH • 1000B ASE-SX • 1000B ASE-T • 1000B ASE-ZX • 100B ASE-BX • 100B ASE-FX • 100B ASE-LX The Catalyst 2960-24PC-L, 2960 -24PC-S, 2 ...

  • Cisco CATALYST 2960 - page 14

    1-4 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 1 Produ ct Overview Front Panel Description Front Panel Description These sections describe the switch front panels: • Catalyst 2960 Switch 24- and 48-Port Switches, page 1-4 • Catalyst 2960 8-Port Switches, page 1 -9 • 10/100 Ports, page 1-11 • 10/100/1000 Ports, p a ...

  • Cisco CATALYST 2960 - page 15

    1-5 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 1 Product Over view Front Panel Description both at the same time. Use the softw are to set the connector type for these ports. For more in formation about the dual-purpose port, see the “Dual-Pu rpose Port” sect ion on page 1-13 . See Figure 1 -2 and Figure 1-3 . Figure 1 ...

  • Cisco CATALYST 2960 - page 16

    1-6 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 1 Produ ct Overview Front Panel Description Catalyst 2960-24PC-L, 2960-24PC-S, 2960-24LC-S, 296 0-24TC-L, 2960-48TC-L, 29 60-24LT-L, 2960-24TT-L, 2960-48TT-L, 2960-48PST-L , and 2960-48PST-S Switches The 10/100 ports on the switches are grouped in pairs. The first member of t ...

  • Cisco CATALYST 2960 - page 17

    1-7 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 1 Product Over view Front Panel Description The Catalyst 2960-24TC- L and Catalyst 2960-48TC-L sw itches hav e dual-purpo se ports, that is, 10/100/1000 ports 1 and 2 can use either the SFP module or the RJ-45 connector for that port, but not both. Use the software to set t he ...

  • Cisco CATALYST 2960 - page 18

    1-8 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 1 Produ ct Overview Front Panel Description Figure 1 -12 Catalyst 2960-48TT -L Switc h Fr ont P anel The Catalyst 2960-48PST -L and 29 60-48PST -S switches hav e two SFP module slots (numbered 1 and 2) and two 10/100/10 00 uplink ports (numbered 3 and 4). Por ts 1 to 48 on th ...

  • Cisco CATALYST 2960 - page 19

    1-9 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 1 Product Over view Front Panel Description Figure 1 -15 Catalyst 2960G-24TC-L Switch F r ont P anel Figure 1 -16 Catalyst 2960G-48TC-L Switch F r ont P anel Catalyst 2960 8-Port Switches These sections describe the Ca ta lyst 2960 8-p ort switches: • Catalyst 2960 PD-8TT -L ...

  • Cisco CATALYST 2960 - page 20

    1-10 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 1 Produ ct Overview Front Panel Description Catalyst 2960-8TC-S, Cata lyst 2960-8TC-L, and Cata lyst 2960G-8TC -L Switches The console ports for the Catalyst 2960-8TC-S, Catalyst 2960-8TC-L, an d Catalyst 2960G-8TC-L switches ( Figure 1-18 to Figure 1-20 ) are on the front p ...

  • Cisco CATALYST 2960 - page 21

    1-11 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 1 Product Over view Front Panel Description 10/100 Ports Y ou can set the 10/100 ports t o operate at 10 or 100 Mb/s i n full-duple x or half-duple x mode. Y ou can also set these ports for speed and duple x autonegot iatio n. The def ault setting is autonego tiate. When th e ...

  • Cisco CATALYST 2960 - page 22

    1-12 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 1 Produ ct Overview Front Panel Description PoE Ports (Only Catalyst 2960 PoE Switches) This section applies o nly to the Catalyst 2960-24 PC-L, 2960-24L T -L, 2960-24PC-S, 29 60-24LC-S, 2960 48PST -L, and 2960-48PST -S switches. War ni ng V oltages that present a shock haza ...

  • Cisco CATALYST 2960 - page 23

    1-13 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 1 Product Over view Front Panel Description SFP Module Slots The Catalyst 2960 switches ( other than th ose li sted) use Gigabit Ethernet SFP modules for Gigabit uplink connections and 100- Megabit SFP modules f or 100-Meg abit co nnections to establish f iber-opt ic connectio ...

  • Cisco CATALYST 2960 - page 24

    1-14 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 1 Produ ct Overview Front Panel Description Figur e 1 - 21 Connecting Thr ough a 1 0/1 00/1 0 00 Por t Figur e 1 - 22 Connecting Thr ough an Exte r nal AC P o wer A dapte r LEDs Y ou can use the switch LEDs to mon itor switch activity and its performance. Figure 1-23 sho ws ...

  • Cisco CATALYST 2960 - page 25

    1-15 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 1 Product Over view Front Panel Description Figure 1 -23 Cataly st 2960 Switch LEDs System LED The System LED sho ws whether th e system is recei ving po wer and is functi oning properly. T able 1-2 lists the LED colors and their meanings. 1 SYST LED 5 Speed LED 2 RPS LED 6 Po ...

  • Cisco CATALYST 2960 - page 26

    1-16 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 1 Produ ct Overview Front Panel Description RPS LED The RPS LED sho ws the RPS status. Ta b l e 1 - 3 lists the LED color s and their meanings. Note The Catalyst 2960 8-port swi tches, and the Catalyst 2960- 24-S, 2960-24TC-S, 2960-48TC-S, and 2960-48TT -S switches do not ha ...

  • Cisco CATALYST 2960 - page 27

    1-17 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 1 Product Over view Front Panel Description Even if the PoE mode is n ot selected, the PoE LED shows PoE problems when they are detected ( Ta b l e 1 - 5 ). The PoE LED applies only to Catalyst 2960 switches that support PoE. T o select or change a mode, press the Mode b utton ...

  • Cisco CATALYST 2960 - page 28

    1-18 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 1 Produ ct Overview Front Panel Description Dual-Purpose Port LEDs The LEDs on a dual-purpose port sho w whether an RJ-45 connector is co nnected to the port, or if an SFP module is instal led in the slot. See the e xample in Figure 1-24 . Y ou can configure each port as eit ...

  • Cisco CATALYST 2960 - page 29

    1-19 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 1 Product Over view Rear Panel Description Cable Guard for the Catalyst 2960 8-Port Switches Y ou can order an optional cable guard to secure cables to the front of the Catalyst 2960- 8TC-L, 2960G-8TC-L, 2960 -8TC-S, and 2960PD-8TT -L switc hes and prevent them from being a cc ...

  • Cisco CATALYST 2960 - page 30

    1-20 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 1 Produ ct Overview Rear Panel Desc ription Internal Power Supply All switches other than the Cataly st 2960PD-8TT -L are powered through their internal po wer supply . The internal po wer supply is an autoranging unit that supports input v oltages between 100 and 240 V AC. ...

  • Cisco CATALYST 2960 - page 31

    1-21 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 1 Product Over view Rear Panel Description • List the connected switches and the power -supply m odule sizes • Obtain reports when a switc h is po wered by the RPS • Obtain status reports for the RPS po wer -supply module • Read and monitor b ackup, failure, and e xcep ...

  • Cisco CATALYST 2960 - page 32

    1-22 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 1 Produ ct Overview Management Options Management Options The Catalyst 2960 switches of fer se v eral management options: • Cisco Network Assistant Network Assistant is a PC-b ased network management GUI with centralized management of Cisco LAN switches, core switches , ro ...

  • Cisco CATALYST 2960 - page 33

    CH A P T E R 2-1 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 2 Switch Installation (24- and 48-Port Switches) This chapter describes ho w to start you r switch and ho w to interp ret the po wer-on self-test (POST) that ensures p roper oper ation. It also describ es ho w to install the switch and ho w to make connections to t he swit ...

  • Cisco CATALYST 2960 - page 34

    2-2 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 2 Switch In sta llation (24- and 48-Port Switches) Preparing for Installation Warnings These warnings are translated into se veral languages in t he Re gulatory Compliance and Safety Informat ion for the C atalyst 29 60 Switch guide. War ni ng T o prevent the switch from o ve ...

  • Cisco CATALYST 2960 - page 35

    2-3 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 2 Switch Insta llation (24- and 48-Port Switches) Preparing for Installation War ni n g Class 1 laser product. Statement 1008 War ni n g This unit is intend ed for installation in restricted acc ess areas. A restricted access area can b e accessed only through the use of a spec ...

  • Cisco CATALYST 2960 - page 36

    2-4 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 2 Switch In sta llation (24- and 48-Port Switches) Preparing for Installation War ni ng When installing or replacing th e unit, the ground conn ection must alway s be made first an d disconnected last. Statement 1046 War ni ng V oltages that present a shock hazard may exist o ...

  • Cisco CATALYST 2960 - page 37

    2-5 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 2 Switch Insta llation (24- and 48-Port Switches) Verifying Switch Operation When you use shorter lengths of single-mo de fiber cabl e, you might need to insert an inline optical attenuator in the link to a v oid ov erloading the recei v er . When the fiber -optic cable span is ...

  • Cisco CATALYST 2960 - page 38

    2-6 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 2 Switch In sta llation (24- and 48-Port Switches) Installing the Switch War ni ng Attach only the following Cisco RPS model to the RPS receptacle: PWR-RPS2300, PWR675-AC-RPS-N1=. Statement 370 As the switch po wers on, it begi ns the POST , a series of tests that runs automa ...

  • Cisco CATALYST 2960 - page 39

    2-7 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 2 Switch Insta llation (24- and 48-Port Switches) Installing the Switch T o install t he switch in a 19-inch or 24- inch rack (24-inch racks require opti onal mounting hardw are), follo w the instruction s described in these section s: • Removing Scre ws from th e Switch, pag ...

  • Cisco CATALYST 2960 - page 40

    2-8 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 2 Switch In sta llation (24- and 48-Port Switches) Installing the Switch Figur e 2-2 Attac hing Br ack ets f or 19-Inc h Rac ks to a Catalyst 2960 S witch, F r ont P anel F orwar d Figur e 2-3 Attac hing Br ack ets f or 24-Inch Rac ks to a Catalyst 2960 Switc h, Fr ont P anel ...

  • Cisco CATALYST 2960 - page 41

    2-9 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 2 Switch Insta llation (24- and 48-Port Switches) Installing the Switch Figur e 2-5 Attac hing Br ack ets f or 24-Inch Rac ks to a Catalyst 2960 S witch, Rear P anel F orw ard Figur e 2-6 Attac hing Br ack ets f or 19-Inc h T elco Racks t o a Catalyst 2960 Switc h Figur e 2-7 A ...

  • Cisco CATALYST 2960 - page 42

    2-10 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 2 Switch In sta llation (24- and 48-Port Switches) Installing the Switch Mounting the Switch in a Rack After the brackets are attached to the switch, use the four supplied number -12 Phillips machine scre ws to securely attach the bra cke ts to the rack, as sho wn in Figure ...

  • Cisco CATALYST 2960 - page 43

    2-11 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 2 Switch Insta llation (24- and 48-Port Switches) Installing the Switch Attaching the Cable Guide W e recommend that you attach the cable guide to prevent the cables from obscuring the front panel of the switch and the other device s inst alled in the rack. Use the suppl ied b ...

  • Cisco CATALYST 2960 - page 44

    2-12 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 2 Switch In sta llation (24- and 48-Port Switches) Installing the Switch Attaching the Brackets to t he Switch for Wall-Mounting Figure 2-10 show s how to attach a 19-inch bracket to one side of the switch. Fol low the same steps to attach the second bracket to the opposite ...

  • Cisco CATALYST 2960 - page 45

    2-13 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 2 Switch Insta llation (24- and 48-Port Switches) Installing the Switch Mounting the Switch on a Wall For the best support of the switch and cables, mak e sure the swi tch is at tached secur ely to wall studs or to a fi rmly attached plyw ood mounting backb oard. Mount the swi ...

  • Cisco CATALYST 2960 - page 46

    2-14 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 2 Switch In sta llation (24- and 48-Port Switches) Connecting to the 10/100 and 10/100/1000 Ports After the switch is mounted on t he wall, do these tasks to complete the i nstallation: • Po wer on the switch. See the “V erifying Switch Opera tion” section on page 2-5 ...

  • Cisco CATALYST 2960 - page 47

    2-15 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 2 Switch Insta llation (24- and 48-Port Switches) Installing and Removing SFP Module s Caution T o pre vent el ectrostatic-dischar ge (ESD) damage , follo w your norm al board and component hand ling procedures. Step 1 When connecting to w orkstations, serv ers, routers, an d ...

  • Cisco CATALYST 2960 - page 48

    2-16 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 2 Switch In sta llation (24- and 48-Port Switches) Installing and Remo ving SFP Modules stipulations for SFP module connections. Use only Cisco SFP modules on the Catalyst 29 60 switch. Cisco SFP modules and the Catalyst 29 60 switch support the Qualit y ID feature. Only SFP ...

  • Cisco CATALYST 2960 - page 49

    2-17 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 2 Switch Insta llation (24- and 48-Port Switches) Installing and Removing SFP Module s Figur e 2-15 Installing an SFP Module int o an SFP Module Slot Step 5 Remov e the dust plugs from the SFP module opt ical ports and store them for late r use. Caution Do not remov e the dust ...

  • Cisco CATALYST 2960 - page 50

    2-18 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 2 Switch In sta llation (24- and 48-Port Switches) Connecting to SFP Modules Figure 2-16 Removing a Bale-C lasp Latch SFP Module by Using a Flat-Blade Screw dr iver Step 5 Grasp the SFP module between your thumb and index f inger , and carefull y remov e it from the module s ...

  • Cisco CATALYST 2960 - page 51

    2-19 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 2 Switch Insta llation (24- and 48-Port Switches) Connecting to SFP Modu les Step 1 Remov e the rubber plugs from the module por t and fib er-o ptic cable, and store them for future use. Step 2 Insert one end of the f iber-opt ic cable into the SFP module port (see Figure 2-17 ...

  • Cisco CATALYST 2960 - page 52

    2-20 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 2 Switch In sta llation (24- and 48-Port Switches) Connecting to a Dual- Purpose Port Note The auto-MDIX feature is enabled by default. F or conf iguration information for this feature, see the switch softw are conf iguration guide or the switch command reference. Figur e 2- ...

  • Cisco CATALYST 2960 - page 53

    2-21 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 2 Switch Insta llation (24- and 48-Port Switches) Where to Go Next Figur e 2-19 Connecting to a Dual -Pur pose P o rt Step 2 Connect the other end of the cable to the other de vi ce. The switch automaticall y detects the connection and configures the port. By default, the swi ...

  • Cisco CATALYST 2960 - page 54

    2-22 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 2 Switch In sta llation (24- and 48-Port Switches) Where to Go Ne xt ...

  • Cisco CATALYST 2960 - page 55

    CH A P T E R 3-1 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 3 Switch Installation (8-Port Switches) This chapter describes ho w to start you r switch and ho w to interp ret the po wer-on self-test (POST) that ensures proper operation. It also describes ho w to in stall the switch . The installation information in this chapter is sp ...

  • Cisco CATALYST 2960 - page 56

    3-2 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 3 Switch Installation (8-Port Switches) Preparing for Installation War ni ng Before working on equipme nt that is connected to po wer lines, remove jewelry (including ring s, necklaces, and watches). Met al objects will heat up when connected to power and groun d and can caus ...

  • Cisco CATALYST 2960 - page 57

    3-3 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 3 Switch In stallation (8-Port Switches) Preparing for Installation War ni n g This equipment must be grounde d. Never defeat the ground conductor or operate the eq uipment in the absence of a suita bly installed ground conductor . Contact the appropri ate electrical inspection ...

  • Cisco CATALYST 2960 - page 58

    3-4 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 3 Switch Installation (8-Port Switches) Preparing for Installation • Do not stack switches or place switches side -by-side unless they are separated on all sides by at least 3 inches (7.6 cm) of clearance from each other . • Allo w at least 1.75 inches (4 cm) of cl earanc ...

  • Cisco CATALYST 2960 - page 59

    3-5 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 3 Switch In stallation (8-Port Switches) Verifying Switch Operation Installing the Catalyst 2960 8-port switches in a 19-inch rack requires an optional bracket ki t that is not included with t he switch. Y ou can order a kit containing the 19-inch rack -mounting brack ets and h ...

  • Cisco CATALYST 2960 - page 60

    3-6 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 3 Switch Installation (8-Port Switches) Installing the Switch • Under the Desk- or Shelf-Mo unting (with Mount ing Scre ws), page 3-8 • W all-Mounting (with Mounting Scre ws), page 3 -11 • Magnet Mounting, page 3-14 • Rack-Mounting, page 3- 15 • W all-Mounting (with ...

  • Cisco CATALYST 2960 - page 61

    3-7 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 3 Switch In stallation (8-Port Switches) Installing the Switch Desk- or Shelf-Mounting (with Mounting Screws) This section is sp ecific to the Catalys t 2960 8-port switches. For information appl icable to the other Catalyst 29 60 switches, see Chapter 2, “Switch Installation ...

  • Cisco CATALYST 2960 - page 62

    3-8 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 3 Switch Installation (8-Port Switches) Installing the Switch Figur e 3-2 Mounting the S witch on T op of a Desk or Shelf After the switch is mounted on t he desk or shelf, do these tasks to complete the install ation: 1. Po wer on the switch. See the “V erifying Switch Ope ...

  • Cisco CATALYST 2960 - page 63

    3-9 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 3 Switch In stallation (8-Port Switches) Installing the Switch Figure 3-3 Installing the Mounting Scr ews Under a Desk or Shelf Step 4 Use a 0.144-inch (3.7 mm) or a #27 d rill bit to drill a 1/2- inch (12.7 mm) hole in the three scre w template slots. Step 5 Insert three scre ...

  • Cisco CATALYST 2960 - page 64

    3-10 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 3 Switch Installation (8-Port Switches) Installing the Switch Figur e 3-4 Mounting the S witc h Under a Desk or Shelf After the switch is mounted under the desk or shelf, do these t asks to complete the installatio n: 1. Po wer on the switch. See the “V erifying Switch Ope ...

  • Cisco CATALYST 2960 - page 65

    3-11 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 3 Switch In stallation (8-Port Switches) Installing the Switch Wall-Mounting (with Mounting Screws) This section is sp ecific to the Catalys t 2960 8-port switches. For information appl icable to the other Catalyst 29 60 switches, see Chapter 2, “Switch Installation (24- and ...

  • Cisco CATALYST 2960 - page 66

    3-12 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 3 Switch Installation (8-Port Switches) Installing the Switch Figure 3-5 Installing the Mounting Screws on a W all Step 4 Attach the scre w template to the wall. Step 5 Use a 0.144-inch (3.7 mm) or a #27 d rill bit to drill a 1/2- inch (12.7 mm) hole in the three scre w temp ...

  • Cisco CATALYST 2960 - page 67

    3-13 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 3 Switch In stallation (8-Port Switches) Installing the Switch Figur e 3-6 Installing the Switc h On a W all After the switch is mounted on the wa ll, do these tasks to complete the installation: 1. Po wer on the switch. See the “V erifying Switch Opera tion” section on pa ...

  • Cisco CATALYST 2960 - page 68

    3-14 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 3 Switch Installation (8-Port Switches) Installing the Switch Magnet Mounting This section is sp ecific to the Catalys t 2960 8-port switches. For information applicable to the other Catalyst 29 60 switches, see Chapter 2, “Switch Installation (24- and 48-Port Switches). ? ...

  • Cisco CATALYST 2960 - page 69

    3-15 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 3 Switch In stallation (8-Port Switches) Installing the Switch Rack-Mounting This section is sp ecific to the Catalys t 2960 8-port switches. For information appl icable to the other Catalyst 29 60 switches, see Chapter 2, “Switch Installation (24- and 48-Port Switches). ” ...

  • Cisco CATALYST 2960 - page 70

    3-16 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 3 Switch Installation (8-Port Switches) Installing the Switch Mounting the Switch in a 19-Inch Rack After the b rackets are attach ed to the sw itch, insert the switch into the 19-inch rack , and align the bracket in the rack. Use either th e 10-32 pan-head scre ws or the 12 ...

  • Cisco CATALYST 2960 - page 71

    3-17 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 3 Switch In stallation (8-Port Switches) Installing the Switch War ni n g Read the wall-mounting in structions carefully before beginnin g installation. Failure to use the correct hardware or to follow the correct p rocedures could result in a hazardous situation to p eople an ...

  • Cisco CATALYST 2960 - page 72

    3-18 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 3 Switch Installation (8-Port Switches) Where to Go Ne xt For co nfigu ration instructions abou t using the CLI setu p program, go to Appendix C, “Conf iguring the Switch with the CLI-Based Set up Program. ” Where to Go Next If the default configurati on is satisfactory ...

  • Cisco CATALYST 2960 - page 73

    CH A P T E R 4-1 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 4 Troubleshooting The LEDs on the front panel pro vide troubleshoot ing information ab out the switch. The y sho w failu res in the p o w e r - on se l f- t e st (POST) , port-con necti vity pr oblems, and ov erall switch performance. For a full description of the switch L ...

  • Cisco CATALYST 2960 - page 74

    4-2 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 4 Tro ubleshooting Diagnosing Prob lems Verify Switch POST Results As the switch po wers on, it begi ns the POST , a series of tests that runs automatically to ensure that the switch functions proper ly . It might take se ve ral minutes for the switch to complete POST . When ...

  • Cisco CATALYST 2960 - page 75

    4-3 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 4 Troubleshooting Diagnosing Problems Ethernet and Fiber Cables Make sure that you hav e the corr ect cable type for the connection: • For Ethernet, use Cate gory 3 copper cable for 10 Mb/s unshielded twisted pair (UTP) connections. Use either Categor y 5, Category 5e, or Cat ...

  • Cisco CATALYST 2960 - page 76

    4-4 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 4 Tro ubleshooting Diagnosing Prob lems Port and Interface Settings An obviou s but sometimes o v erlooked cause of port connecti vity fail ure is a disabled port. V erify that the port or interface is not disabled or for some reason powered of f. If a port or interf ace is m ...

  • Cisco CATALYST 2960 - page 77

    4-5 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 4 Troubleshooting Clearing the Switch IP Addre ss and Configuration These circumstances can result in a mismatch: • A manually set speed or dup lex parameter is di fferent from the manually set speed or duple x parameter on the connected port. • A port is set to autone goti ...

  • Cisco CATALYST 2960 - page 78

    4-6 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 4 Tro ubleshooting Locating the Switch Serial Numbe r The switch now beha ve s like an unconf igured switch. Y ou can configure the switch by using Express Setup as described in the sw itch getting star ted guide that is incl uded with the switch. Y ou can also conf igure the ...

  • Cisco CATALYST 2960 - page 79

    4-7 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Chapter 4 Troubleshooting Locating the Swit ch Serial Number Figur e 4-3 Ser ial Number Loca tion on the Catalyst 2960-8 TC-L, Cataly st 2960G-8TC-L, Catalyst 2960-8TC-S, and Catalyst 2 960PD-8TT -L Switch es 200186 SN: XXXNNNNXXXX ...

  • Cisco CATALYST 2960 - page 80

    4-8 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Chapter 4 Tro ubleshooting Locating the Switch Serial Numbe r ...

  • Cisco CATALYST 2960 - page 81

    A-1 Catalyst 2960 Switch Hardwa re Installation Guide OL-7075-09 APPENDIX A Technical Specifications These tables list the technical specifica tions for the Ca talyst 2960 sw itches: • T able A-1 on pag e A-1 , En viro nmental Specif ications for All Cataly st 2960 Switches • T able A-2 on page A-2 , Cat alyst 2960-24-S, 2960-24TC- S, and 2960- ...

  • Cisco CATALYST 2960 - page 82

    A-2 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Appendix A Tec hnical Specificatio ns T able A -2 Catalyst 2960-24-S, 2960-24TC-S, and 2960-48TC-S S witc h Specifications Po wer Requirements A C input voltage Pow er consumption Power rating 100 to 240 V A C (autoranging) 1.3 to 0.8 A, 50 to 60 Hz • 30 W , 103 BTUs per hour (Cata ...

  • Cisco CATALYST 2960 - page 83

    A-3 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Appendix A Technical Sp ecifications T able A -4 Catalyst 2960-24TC-L and Cataly st 2 960-24TT -L Switc h Specifications Po wer Requirements A C input voltage DC input v oltage for RPS 2300 DC input v oltage for RPS 675 Pow er consumption Power rating 100 to 240 V A C (autorang ing) 1. ...

  • Cisco CATALYST 2960 - page 84

    A-4 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Appendix A Tec hnical Specificatio ns T able A -7 Catalyst 2960-8TC-L, 2960G-8TC -L, 2960-8TC-S, and 2960PD-8TT -L S witch Specifications Po wer Requirements A C input voltage DC input v oltage Pow er consumption Power rating 100 to 240 V A C (auto ranging) 0.5 to 0.25 A, 50 to 60 Hz ...

  • Cisco CATALYST 2960 - page 85

    A-5 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Appendix A Technical Sp ecifications T able A -8 Catalyst 2960-48PST -S , 2960-24PC-S, and 2960-24LC-S Switc h Specifications Po wer Requirements A C input v oltage 100 to 240 V A C (autorang ing) 8 to 4 A, 50 to 60 Hz (C atalyst 2960-24PC -S) 3 to 1.5 A, 50 to 6 0 Hz (Catalyst 2960-24 ...

  • Cisco CATALYST 2960 - page 86

    A-6 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Appendix A Tec hnical Specificatio ns ...

  • Cisco CATALYST 2960 - page 87

    B-1 Catalyst 2960 Switch Hardwa re Installation Guide OL-7075-09 APPENDIX B Connector and Cab le Specifications This appendix describes the Cat alyst 2960 switch ports and the cables and ad apters that you use to connect the switch to ot her dev ices and includes these sect ions: • Connector Specif ications, page B-1 • Cable and Adapter Specifi ...

  • Cisco CATALYST 2960 - page 88

    B-2 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Appendix B Connec tor and Cable Specific ations Connector Specifications When connecting the port s to 10B ASE-T - and 100BA SE-TX-compatible de vices, such as switches or repeaters, you can use a two or four twisted-pair , crossover cable. Figure B-6 sho ws the two twisted-pair , cr ...

  • Cisco CATALYST 2960 - page 89

    B-3 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Appendix B Connector and Cable Specifications Connector Specifications SFP Module Ports The Catalyst 2960 switch uses SFP modules fo r f iber -optic and copper uplink ports. See the Catalyst 2960 switch release note s for a list of supported SFP modules. Figure B-2 Fiber -Optic SFP Mod ...

  • Cisco CATALYST 2960 - page 90

    B-4 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Appendix B Connec tor and Cable Specific ations Cable and Adapter Spec ifications Figure B-4 1 0/1 0 0/1 000 Por t Pinouts Console Port The console port use s an 8-pin RJ-45 connector, which i s described in Ta b l e B - 2 and Ta b l e B - 3 . The supplied RJ-45-to- DB-9 adapter cabl ...

  • Cisco CATALYST 2960 - page 91

    B-5 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Appendix B Connector and Cable Specifications Cable and Adapter Specifications T able B-1 Fiber -Optic SFP Module P ort Cab ling Specifications SFP Module Wavelength (nanometers) Fiber T ype Core Size/Cladding Size (micron) Modal Bandwidth (MHz/km) 1 1. Modal bandwidth applies only to ...

  • Cisco CATALYST 2960 - page 92

    B-6 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Appendix B Connec tor and Cable Specific ations Cable and Adapter Spec ifications Two Twisted-Pair Cable Pinouts Figure B-5 and Figure B-6 show the schematics of two twi sted-pair cables for connecti ng to 10B ASE-T - and 100B ASE-T X-compatible de vices. Figure B-5 T wo T wisted-P a ...

  • Cisco CATALYST 2960 - page 93

    B-7 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Appendix B Connector and Cable Specifications Cable and Adapter Specifications Figur e B-8 Four T wist ed-P ai r Crosso v er Cable Schematics for 1 0/1 00/1 0 0 0 P ort s Crossover Cable and Adapter Pinouts This section describes ho w to identify a crossov er cable and also describes t ...

  • Cisco CATALYST 2960 - page 94

    B-8 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Appendix B Connec tor and Cable Specific ations Cable and Adapter Spec ifications Adapter Pinouts Ta b l e B - 2 lists the pinouts for the console port, the RJ-45-to- DB-9 adapter cable, and the consol e devi ce. Ta b l e B - 3 lists the pinouts for the console port, RJ-45-to -DB-25 ...

  • Cisco CATALYST 2960 - page 95

    C-1 Catalyst 2960 Switch Hardwa re Installation Guide OL-7075-09 APPENDIX C Configuring the Switch with the CLI-Based Setup Program This appendix pro vides a command-line interface (CLI) -based setup procedure for a standalone swi tch. For product o vervie w information, see Chapter 1 , “Product Ov ervie w . ” Before you connect the switch to a ...

  • Cisco CATALYST 2960 - page 96

    C-2 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Appendix C Config uring the Switch with the CLI-Based Setup Program Accessing the CLI After you ha ve entered the conf iguration inf ormation for the switch, sa ve it to flash memory by using the write memory privi leged EXEC co mmand. Note While in Express Setup mo de, the IP addres ...

  • Cisco CATALYST 2960 - page 97

    C-3 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Appendix C Configuring the Switch with the CLI-Based Setup Program Connecting to the Console Port Connecting to the Console Port Y ou can use the console port to perform the initial co nf iguration. T o connect th e switch console port to a PC, use the supplied RJ -45-to-DB-9 adapter c ...

  • Cisco CATALYST 2960 - page 98

    C-4 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Appendix C Config uring the Switch with the CLI-Based Setup Program Connecting to a Power Source Step 3 Config ure the baud rate and charact er format of the PC or terminal to match these console port def ault characteristics: • 9600 baud • 8 data bits • 1 stop bit • No parit ...

  • Cisco CATALYST 2960 - page 99

    C-5 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Appendix C Configuring the Switch with the CLI-Based Setup Program Entering the Initial Configuration Information IP Settings Y ou need this information from your network admi ni strator before you complete th e setup program: • Switch IP address • Subnet mask (IP netmask) • Defa ...

  • Cisco CATALYST 2960 - page 100

    C-6 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Appendix C Config uring the Switch with the CLI-Based Setup Program Entering the Initial Con figuration Information Step 6 (Optional) Conf igure Simple Netw ork Management Pr otocol (SNMP) by responding to the prompt s. Y ou can also conf igure SNMP later through the CL I, the d evic ...

  • Cisco CATALYST 2960 - page 101

    C-7 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 Appendix C Configuring the Switch with the CLI-Based Setup Program Entering the Initial Configuration Information [2] Save this configuration to nvram and exit. If you want to save the configuration and use it the next time the switch reboots, save it in NVRAM by selecting option 2. En ...

  • Cisco CATALYST 2960 - page 102

    C-8 Catalyst 2960 Switch Hard ware I nstallation Guide OL-7075-09 Appendix C Config uring the Switch with the CLI-Based Setup Program Entering the Initial Con figuration Information ...

  • Cisco CATALYST 2960 - page 103

    IN-1 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 INDEX Numerics 10/100/1000 p orts cable lengths 2-4, 3-4 connecting to 2-14 connectors and cables B-1 to B-2 described 1-11 illustrated 1-4 PoE 1-12 speed indicator 1-18 10/100/1000 port s, described 1-13 10/100 ports 1-11 10/100 ports PoE 1-12 19- and 24-inch racks 2-7, 3-15 A AC pow ...

  • Cisco CATALYST 2960 - page 104

    Index IN-2 Catalyst 2960 Switch Hardwa re Installation Guide OL-7075-09 Cisco IP Phones, connecting to 1-12, 2-15 Cisco RPS See RPS CiscoView 1-22 class 1 laser warning 2-3, 3-2 CLI accessing by using Express Setup C-1 accessing through console port C-2 described 1-22 command-line interface See CLI compliance warning 2-4, 3-3 configuration examples ...

  • Cisco CATALYST 2960 - page 105

    Index IN-3 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 G ground connection warning 2-4, 3-3 grounded equipmen t warning 2-3, 3-3 H HP OpenView 1-22 humidity, relative A-1 I installati on assigning the IP ad dress C-4 connecting t o a power source C-4 mounting in a rack (24- and 48-port switches) 2-7 to 2-10 in a rack (8-port switche ...

  • Cisco CATALYST 2960 - page 106

    Index IN-4 Catalyst 2960 Switch Hardwa re Installation Guide OL-7075-09 P pinouts 10/100 ports B-3 adapters B-7 console port B-8 crossover cables four twisted-pair, 1000BASE-T p orts B-7 two twisted-pair 10/ 100 ports B-6 RJ-45-to-DB-25 terminal adapter B-8 RJ-45-to-DB-9 terminal adapter B-8 SFP module B-3 straight-throu gh cables four twisted-pair ...

  • Cisco CATALYST 2960 - page 107

    Index IN-5 Catalyst 2960 Switch Hardware Installation Guide OL-7075-09 S safety warnings 2-2, 3-1 SC connector B-3 security slot 1-21 serial number location 4-6 SFP modules 1000BASE-T supported speeds 1-17 bale-clasp latch removal 2-17 cables B-4 connecting to 2-18 to 2-20 connectors B-3 described 1-13 installati on 2-16 to 2-17 shelf-mounting 2-14 ...

  • Cisco CATALYST 2960 - page 108

    Index IN-6 Catalyst 2960 Switch Hardwa re Installation Guide OL-7075-09 read the wall-mounting instr uctions 2-2, 3-11, 3-17 restricted access area 2-3 RPS 2-2, 2-13 stacking the chassis 2-2, 3-2 trained and qual ified personnel 2-3 ...

メーカー Cisco カテゴリー Switch

Cisco CATALYST 2960のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- CATALYST 2960の取扱説明書
- Ciscoの製品カード
- パンフレット
- またはCisco CATALYST 2960の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Cisco CATALYST 2960の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Cisco CATALYST 2960の取り付け説明書、サービスマニュアル、簡易説明書、またはCisco CATALYST 2960のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Cisco CATALYST 2960の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Cisco CATALYST 2960デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCisco CATALYST 2960を使用するのを助ける技術的文書のことです。説明書は通常、全てのCisco CATALYST 2960ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Ciscoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Cisco CATALYST 2960の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCisco CATALYST 2960の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Cisco CATALYST 2960に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Cisco CATALYST 2960デバイスの基本機能を使うにあたってのヒント。 Cisco CATALYST 2960のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Cisco CATALYST 2960に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCisco CATALYST 2960のメーカー/サービスへの連絡先に関する情報。

Cisco CATALYST 2960についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCisco CATALYST 2960の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCisco CATALYST 2960で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)