-
Image IMTL49105.2 - page 1
Model No. IMTL49105.2 S erial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal USER'S MANUAL QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction . If you have questions, or if parts are damaged or m ...
-
Image IMTL49105.2 - page 2
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . ...
-
Image IMTL49105.2 - page 3
1 . It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that blo ...
-
Image IMTL49105.2 - page 4
4 23. Never insert any object into any opening. 24. DANGER: Always unplug the power c ord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures de- s cribed in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing o ther ...
-
Image IMTL49105.2 - page 5
5 T hank you for selecting the new IMAGE ® 1 7.0 R tread- m ill. The 17.0 R treadmill combines advanced technol- ogy with innovative design to make your workouts at home more effective and enjoyable. And when you’re not exercising, the 17.0 R treadmill can be folded up, re- quiring less than half the floor space of other treadmills. For your ben ...
-
Image IMTL49105.2 - page 6
ASSEMBL Y To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. N ote: The und ersi de o f th e tr eadm ill walk ing belt is coated wit ...
-
Image IMTL49105.2 - page 7
7 2. Orient the Right Upright (36) so the square hole near the l ower end is in the position shown. Attach the Right Upright to the Upright Base (48) with two Upright Bolts ( 40) and two Upright Star Washers (39). D o not tighten the Upright Bolts yet. Attach each Wheel (45) to the Upright Base (48) with a W heel Bolt (89), two Wheel Spacers (44), ...
-
Image IMTL49105.2 - page 8
8 28 49 6. Hold the Console Base (26) near the Right Handrail (49). Attach the end of the ground wire on the Console Base to the indicated small hole in the Handrail with a Silver Ground Screw (27). Connect the Wire Harness (28) to wire harness on the Console Base (26). Make sure to connect the connec- tors properly (see the inset drawing). The con ...
-
Image IMTL49105.2 - page 9
8. Lower the Uprights (31, 36) until the Handrails (18, 49) are touching the floor. See the lower drawing. Position the Uprights (31, 36) so t he treadmill Frame (74) is centered between them. Firmly tighten the four Upright Bolts (40) and the two Frame Bolts (32). Be careful not to overtighten the Frame Bolts. 31 31, 36 32 18, 49 74 36 Top View 8 ...
-
Image IMTL49105.2 - page 10
10 11. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place; the large allen wrench is used to adjust the walking belt (see page 20). To protect the floor or carpet, place a mat under the treadmill. 10. Remove the knob from the pin. Mak ...
-
Image IMTL49105.2 - page 11
12 FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button. As you exercise, the console will display continuous exercise feedback. You can even measu r ...
-
Image IMTL49105.2 - page 12
1 1 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER C ...
-
Image IMTL49105.2 - page 13
H OW TO USE THE MANUAL MODE Insert the key into the console. See HOW TO TURN ON THE POWER on page 1 2. Select the manual mode. When the key is in- serted, the manual mode will be selected. If a program has been selected, press the Trainer Programs but- ton repeatedly until a track appears in the display. Start the walking belt. To start the walking ...
-
Image IMTL49105.2 - page 14
14 To reset the display, press the Stop button, re- move the key, and then reinsert the key. Measure your heart rate if desired. B efore using the handgrip pulse sensor, remove the sheets of clear plastic from the metal contacts. In addition, make sure that your hands are clean. To measure your heart rate, stand on the foot rails and place your han ...
-
Image IMTL49105.2 - page 15
15 To stop the program temporarily, press the Stop button. The time will begin to fla sh i n th e dis play . T o restart the program, press the Start bu tto n o r the Speed increase button. The walking belt wi ll b egin to move at 2 mph. To end the program, press the Stop button, remove the key, and then r einsert the key. Follow your progress with ...
-
Image IMTL49105.2 - page 16
16 When the first period is completed, all speed set- tings will move one column to the left . The speed s etting for the second period will then be shown in the flashing Current Period column and the tread- m ill will automatically adjust to the speed and in- cline set tings for the second period. Note: If all five of the indicators in the Current ...
-
Image IMTL49105.2 - page 17
17 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- m anently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hol ...
-
Image IMTL49105.2 - page 18
18 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the treadmill with your right hand as shown. Pull the latch knob to the left and hold it. Pivot the frame down until it is past the latch pin. 2. Hold the metal frame firmly with both hands , and lower it to the floor. CAUTION: To decrease the possibility of in- jury, do not lower the frame by gripping ...
-
Image IMTL49105.2 - page 19
19 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call the toll-free telephone number on the f ront cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged i ...
-
Image IMTL49105.2 - page 20
Locate the Reed Switch (63) and the Magnet (67) on the left side of the Pulley (64). Turn the Pulley until t he Magnet is aligned with the Reed Switch. M ake sure that the gap between the Magnet and the R eed Switch is about 1/8”. I f necessary, loosen the Screw (11), move the Reed Switch slightly, and then retighten the Screw. Reattach the Hood ...
-
Image IMTL49105.2 - page 21
CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the ...
-
Image IMTL49105.2 - page 22
SUGGESTED STRETCHES T he correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1 . Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then r ...
-
Image IMTL49105.2 - page 23
23 NOTES ...
-
Image IMTL49105.2 - page 24
P ART LIST—Model No. IMTL49105.2 R0506A Key No. Qty. Description Key No. Qty. Description 1 1 Motor Hood 2 21 3/4” Screw 3 1 Left Foot Rail 4 8 Foot Rail Screw 5 2 Motor Tension Bolt 6 2 Motor Tension Washer 7 1 Motor Star Washer 8 2 Motor Bolt 9 1 Drive Motor 10 1 Motor Bracket 11 5 Ground Screw 12 2 Power Bracket Star Washer 13 1 Power Cord A ...
-
Image IMTL49105.2 - page 25
36 99 1 5 8 7 6 9 5 6 10 53 52 47 59 58 57 13 1 1 100 1 1 14 15 15 16 18 30 2 17 21 22 28 25 2 21 22 20 19 17 49 31 34 37 38 33 32 35 34 32 33 48 39 40 39 40 37 38 28 37 38 45 89 44 44 47 37 38 47 44 45 44 89 23 29 50 51 2 38 38 38 56 47 54 76 55 60 54 61 54 66 64 54 65 66 72 73 4 4 3 71 68 70 69 4 4 78 78 38 77 83 38 81 82 85 84 100 82 81 79 80 38 ...
-
Image IMTL49105.2 - page 26
LIMITED W ARRANTY ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The drive motor is warranted for three (3) years after the date of purchase. Parts and labor are warranted for ninety (90) days after the date of purchase. This warranty extend ...
Image IMTL49105.2についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもImage IMTL49105.2の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがImage IMTL49105.2で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。