Zebex Z-1170-BTの取扱説明書

34ページ 関係なし
ダウンロード

ページに移動 of 34

Summary
  • Zebex Z-1170-BT - page 1

    ...

  • Zebex Z-1170-BT - page 2

    ii Copyright © 2010. All right s reserved. No warranty of any kind is made in regard to this material, including, but not limited to, impl ied warranties of merchantability or fitness for a particular purpose. Although every ef fort is made to assure accuracy and completeness, we can not be held liable for any errors contained herein no r incident ...

  • Zebex Z-1170-BT - page 3

    iii Laser Safety The portable dat a terminal complies with safety standard IEC 60825 for a Class I laser product. It also complies with CDRH as applicable to a Class II laser product. A void long term staring into direct laser light. Radiant Energy: The advanced portable dat a terminal uses two low-power visible laser diodes operating at 650nm in a ...

  • Zebex Z-1170-BT - page 4

    iv T able of Content General Info rmation ...................................................................1 Introducti on ............................................................................ 1 Unp acki ng .............................................................................. 2 Device Out line ..................................... ...

  • Zebex Z-1170-BT - page 5

    1 General Information 1.1. Introduction Congratulations on your purchase of the Bluetooth Personal Data Collector (PDC) with LCD display . Along with superior portability and visually safe scanning Engine which include CCD and Laser two types, the PDC features a real-time clock, a buzzer , a dual-color status LED, also an UA R T port with optional ...

  • Zebex Z-1170-BT - page 6

    2 1.2. Unp acking The PDC package should cont ain: - 1 ea. Pocket-Sized Personal Data Collector - 1 ea. DB-9(F) serial communication cable ( For data upload and download) - 3 ea. AAA NiMH rechargeable batteries - 1 ea Power Adapter If any package content s are damaged or missing, please contact your dealer immediately . Optional Accessory - Bluetoo ...

  • Zebex Z-1170-BT - page 7

    3 1.3. Device Outline Figure 1: Pocket-Sized P ersonal Dat a Collector Scan LCD Up Key Function LED Down UAR T port ...

  • Zebex Z-1170-BT - page 8

    4 1.4. Battery Care In the interests of providing t he best product performance possible, the Personal Data Collector comes with high quality , rechargeable Nickel Metal Hydride (NiMH) batte ries and a Power Adapter . After NiMH batteries are installed, connect the Power Adapter cable and the batteries charge right in the unit. Before you use new P ...

  • Zebex Z-1170-BT - page 9

    5 batteries already loaded, please press and hold both v and ^ keys for 30 sec. to turn on the PDC 3. 3 pcs AAA 700mAH NiMH rechar geable batteries (Use ZEBEX supplied rechargeable batteries only) ...

  • Zebex Z-1170-BT - page 10

    6 1.5. Bluetooth® Communication The PDC supports to connect with a Bluetooth® radio device via Serial Protocol Profile (SPP). It works like virtual serial cable once connection pair between two dev ices is est ablished. Please make sure the Bluetooth® function is finely equipped on the host device, as well as an applic ation program is installed ...

  • Zebex Z-1170-BT - page 11

    7 Master . PDC has to know the BD address of a ta rget device as well as sets a PIN code. PDC will send out the paring request to the target device. The t arget devic e has to reply by the correct PIN code set by PDC in order to establish a successful p airing connection. The PDC will show a successful pairing st atus after receiving positive respo ...

  • Zebex Z-1170-BT - page 12

    8 encapsulated as below format if the item is set to enable: STX SEQ Data T erminator CKS ETX 1 Byte 1 Byte V aries 1 or 2 Byte 1 Byte 1 Byte Ti t l e Definition STX S tart of p acked data 02H SEQ Sequential number of p acked, Use 020H to 07FH DA T A Record data T erminator Data terminator CKS Checksum, Use 020H to 07FH ETX End of packed dat a 03H ...

  • Zebex Z-1170-BT - page 13

    9 ACK/NAK control: 1.5.9. Connection lost: As time has exceeded the set waiting time for a response, it would be the case of TIMEOUT . On th e screen, it will show “Connection lost”. For full instruction of Blue tooth® setting operation, please refer to Device Setup, Communication. Remote BT device BT T erminal Data Packed NAK Resend ACK ...

  • Zebex Z-1170-BT - page 14

    10 1.6.Use Bluetooth® Dongle If an optional Bluetooth USB dongl e is purchased with PDC, find the IVT BlueSoleil sof t ware in CD packed with the dongle. Or visit the website of IVT company to download trial version. 1.6.1. Sof tware inst allation: 1.6.2. Bluetooth Device Address: Double click the Bluetooth icon to open BlueSoleil main window . Ho ...

  • Zebex Z-1170-BT - page 15

    11 A Bluetoot h service Authorizatio n window will pop out. Set alway s allow the device access to enable and click “Y es”. After p airing the PDC try to conn ect to PC. The connect massage appear at right corner to indica te COM port number to connect. Set the COMM port number to the software you used. The PDC can start communicati on with PC ...

  • Zebex Z-1170-BT - page 16

    12 1.6.4. Pairing and connect to a SPP Slave PDC: T o pairing and connect a SPP slav e PDC, the slave mode and PIN code must set before operation. Power on the PDC and press FN to show “Remote Screen”, follow by press ^ to start connect. The PDC is waiting for master dongle operation. Single-click red ball in main window of Blue Soleil. PC star ...

  • Zebex Z-1170-BT - page 17

    13 A “Quick Connect” window pop out after success connect. Use PC software to connect with PDC, set the COMM port show in “Quick Connect” window . Right click device icon and selec t “status” can find connect ed COM port number too. ...

  • Zebex Z-1170-BT - page 18

    14 Getting S tart 2.1. Inst alling and charging battery Figure 2: Inserting Batteries Press the battery cover lock to remove the cover . Insert batteries according to t he orientation in the picture Replace the cover and lock it back. Charging Batteries W arning! Use the Power Adapter wit h NiMH batteries ONL Y! Connecting the Power Adapter with an ...

  • Zebex Z-1170-BT - page 19

    15 2. Plug the Power Adapter connector into the socket on the side of the large end connector of the Communication Cable. 3. Plug the Power Adapter into an outlet. While charging, the LED on the PDC lights up red. The LE D turns of f when the batteries are fully charged. Charging takes 3 to 5 hours. Figure 3: Connecting the Power Adapter It is norm ...

  • Zebex Z-1170-BT - page 20

    16 2.2. Power on device to collect data The Personal Data Collector is pre-programmed with a basic dat a collection program, FREET ASK th at can read and store barcodes, do simple edits, and upload dat a to a PC through the Communication Cable. 2.2.1. Power on device Press and hold the v and ^ keys together to turn on the Personal Data Collector , ...

  • Zebex Z-1170-BT - page 21

    17 2.2.2. Menu operation The menu items show on LCD and a reverse item indicates current selection. Use ^ and v keys to change the item selection and confirm by pressing SCAN key . Menu tree list 1. Run T ask 2. Delete Data 3. Setup 1. LCD Contrast 2. Beep V olume 3. System Clock 4. Barcode Set 5. Communication 6. Auto Power Off 4. Upload Data Sele ...

  • Zebex Z-1170-BT - page 22

    18 2.3. Scan barcode Select 1.Run T ask under Main menu Enter into data input mode. Press SCAN key to scan barcode. Hold PDC to point at the tar geted barcode. Sweep the red light vertically across the barcode If decode success, a short beep emit *, LED flashes green Hold SCAN key will keep scanned data display on LCD Release to revert to “input ...

  • Zebex Z-1170-BT - page 23

    19 2.4. Key in dat a When requiring to key in data m anually , there are two modes of data entry . Mode One : Press ^ key once start edit numeric Cursor digit add by one each ^ key Press v to move cursor right 1 digit Empty digit cause cursor back to start Press Scan key to confirm input data Press FN to giv e up and back to “input” Mode T wo : ...

  • Zebex Z-1170-BT - page 24

    20 Dat a storage The PDC can retain more than 2,000 records. T o review stored data, press the ^ key . T o end review of stored data, press the FN key . T o exit scanning mode, press the FN key . T o view scanned data: Press v key in input mode to start view Use ^ key move to previous record Use v keys move to next record Use Sca n + ^ key edit fie ...

  • Zebex Z-1170-BT - page 25

    21 2.5. Upload Dat a There are three kinds of inte rface to upload data, Bluetooth®, RS-232 and HID. Once a communication device is set up (please refer to Device Setup, Communi cation), PDC will automatically detect its readiness before st arting uploading data. Figure 8: Upload Dat a 2.6. Upload dat a with Windows Sof tware Y ou can also upload ...

  • Zebex Z-1170-BT - page 26

    22 Device Setup Select 3.Setup under Main Menu to enter Setup sub-menu. 3.1. LCD Contrast Use v and ^ keys to adjust LCD contra st from 1 to 22. Follow by SCAN to confirm. Figure 10: LCD Contrast 3.2. Beep V olume Use v and ^ keys to select V olume from Low , Medium, Loud and Quiet. Follow by SCAN to confirm. Figure 1 1: Beep V olume 3.3. System Cl ...

  • Zebex Z-1170-BT - page 27

    23 3.4. Barcode Setup Use SCAN key to confirm setting and to go through dif ferent types of barcode, EAN/UPC, Code 39, Codabar , ITF 25, Code 128, Code 93, RSS14, RSS14 Expand ed, RSS14 Limited. Press v and ^ keys to select On/Of f. Figure 12: B arcode Setup 3.5. Communication 3.5.1.Select communication device There are three kinds of interfac e fo ...

  • Zebex Z-1170-BT - page 28

    24 Modify existing BD : Press ^ key to modify BD at Edit mode. ^ : Hexadecimal character v : move cursor FN : undo all SCAN : confirm Press SCAN to confirm again, or v , ^ or FN to edit mode. Enter new BD : Press v key to clear existing BD at Edit mode. ^ : Hexadecimal v : move cursor FN : undo all SCAN : confirm Press SCAN to confirm again, or v , ...

  • Zebex Z-1170-BT - page 29

    25 Set PIN code : Previously paired PIN is shown. Press v , ^ or FN and enter to edit mode. Same as setting BD. ^ key to modify existing PIN. v key to clear existing PIN. SCAN key for scanning a new PIN. Follow by SCAN to confirm. Pairing to slave device : BD and PIN are shown. Press SCAN to confirm. Press SCAN to start p airing or FN to exit. S ta ...

  • Zebex Z-1170-BT - page 30

    26 3.5.3. RF Device – PDC as Slave Select RF Device Select 2. Slave Mode Previously PIN is shown. The left communication p arameter is same as RS-232 setting. 3.5.4. RS-232 Cable Select RS-232 Cable Disable/Enable Sequential Num. Press SCAN to select Disable/Enable Checksum Digit . Press SCAN to select Disable/Enable STX/ETX Packet . Press SCAN t ...

  • Zebex Z-1170-BT - page 31

    27 Disable/Enable Xon/Xoff Control . Press SCAN to select Dis/Enable Host ACK/NAK . Press SCAN to select Set Host Response time. Press SCAN to select Dis/Enable Online Send Rec. Press SCAN to select Disable/Enable Offline Operate. Press SCAN to select 3.5.5. USB HID Cable Select USB HID Cable Set HID Language . Press SCAN to select Set Delay Setup ...

  • Zebex Z-1170-BT - page 32

    28 3.6. Auto Power off Use v and ^ keys to select the wait time of Auto Power off. Select to the setting of 1, 3, 5, 10, 30 minutes or Disable. Follow by SCAN key to confirm. Figure 13: Auto Power Off 3.7. Default Parameter The default settings will be restored whenever performing “ User reset ” operation, the “ Comm. Device ” parameter wil ...

  • Zebex Z-1170-BT - page 33

    29 Codabar Enable ITF 25 Enable Code 128 Enable Code 93 Enable MSI Code Enable RSS14 Disable RSS14 Expanded Disable RSS14 Limited Disable Communication RF Device Communication Mode Master Sequential Num. Disable Checksum Digit Disable STX/ETX Packet Disable Send T erminator Disable (STX/ETX on only) Data T erminator CR/LF Host ACK/NAK Enable Host R ...

  • Zebex Z-1170-BT - page 34

    30 Data T erminator CR/LF Host ACK/NAK Enable Host Response 300 mS (ACK/NAK on only) Online Send Rec. Disable Offline Operate Dis able (Online enable only) USB-HID Cable HID Language USA Delay Setup 50 mS Data T erminator CR Online Send Rec. Disable Offline Operate Dis able (Online enable only) User Reset While PDC is powered off, press and hold SC ...

メーカー Zebex カテゴリー Barcode readers

Zebex Z-1170-BTのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- Z-1170-BTの取扱説明書
- Zebexの製品カード
- パンフレット
- またはZebex Z-1170-BTの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Zebex Z-1170-BTの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Zebex Z-1170-BTの取り付け説明書、サービスマニュアル、簡易説明書、またはZebex Z-1170-BTのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Zebex Z-1170-BTの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Zebex Z-1170-BTデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがZebex Z-1170-BTを使用するのを助ける技術的文書のことです。説明書は通常、全てのZebex Z-1170-BTユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Zebexの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Zebex Z-1170-BTの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははZebex Z-1170-BTの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Zebex Z-1170-BTに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Zebex Z-1170-BTデバイスの基本機能を使うにあたってのヒント。 Zebex Z-1170-BTのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Zebex Z-1170-BTに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるZebex Z-1170-BTのメーカー/サービスへの連絡先に関する情報。

Zebex Z-1170-BTについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもZebex Z-1170-BTの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがZebex Z-1170-BTで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)