日本語 dropdown-ico

Broil King 9025の取扱説明書

53ページ 1.78 mb
ダウンロード

ページに移動 of 53

Summary
  • Broil King 9025 - page 1

    A UT OMA TIC FOOD SER VICE EQUIPMENT A UT OMA TIC GAS BR OILER MODEL 9025 (CCSI CONTR OL) O WNERS MANU AL IMPOR T ANT: RET AIN THIS MANU AL IN A SAFE PLA CE FOR FUTURE REFERENCE. Broiler area m ust be kept free of combustib le materials, and the flow of comb ustion and ventilation air must not be obstructed. Operating per sonnel must not perf orm a ...

  • Broil King 9025 - page 2

    2 T ABLE OF CONTENTS A. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 A.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 A.2 W arranty Inf ormation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 A.3 Ser vice/T echnica ...

  • Broil King 9025 - page 3

    3 A. GENERAL INFORMA TION A.1 Description The Nieco ® Model 9025 automatic broiler , utiliz es dual broil chambers, high release conv ection b ur ners, electric elements, a new , simplified ignition system, easy cleaning and a state-of-the-ar t computer control to help eliminate broiling problems and pro vide the operator with e v en greater contr ...

  • Broil King 9025 - page 4

    4 A.3 Service/T ec hnical Assistance If you e xperience any prob lems with the installation or operation of y our broiler , contact your local A uthorized Nieco Distributor . Fill in the inf or mation bellow and hav e it handy when calling y our authorized ser vice agency for assistance. The serial number is on the broiler rating plate on the side ...

  • Broil King 9025 - page 5

    5 A.4 Important Safety Information (Cont.) In addition to the warnings and cautions in this manual, use the f ollowing guidelines f or safe operation of your Nieco A utomatic Broiler : • Read and f ollow all instructions before using this equipment. • Install or locate broiler only f or its intended use as described in this manual. • Do not o ...

  • Broil King 9025 - page 6

    6 Nieco Cor poration - Model 9025 ...

  • Broil King 9025 - page 7

    7 Nieco Cor poration - Model 9025 * 12 ” (305mm) Minimum, pref erably 610 mm (24 ” ) or more f or ser vice. Location clearances are from walls of broiler height. B.4 Hood Requirements This appliance must be installed under a v entilation hood of adequate size and the f ollowing minimum capacity: Model SCFM 9025 1000 Do not obstruct the flow of ...

  • Broil King 9025 - page 8

    8 B.6 Gas Connection- 1 ” N.P .T . (Nieco P/N 11966; 1 ” Flexible Gas Line) At rated input the gas supply should deliv er a minimum pressure of at least 15 mbar (5" water column) at the broiler connection f or natural gas. Incoming gas supply pressure must not e xceed 50 mbar (14" water column). Note: The installation of this applianc ...

  • Broil King 9025 - page 9

    9 Nieco Cor poration - Model 9025 B.9 Electrical Connection P ower requirements are stated on the unit nameplate and must be connected accordingly . This appli- ance, when installed must be electrically grounded in accordance with local codes , or in the absence of local codes, with the National Electrical Code, ANSI/NFP A 70, or the Canadian Elect ...

  • Broil King 9025 - page 10

    10 C. OPERA TION C.1 Controls and Indicator s ON THE FLEX CHAMBER SIDE Red Pilot Button (P/N 2123) Gas Pressure Gauge (P/N 2001) Main On/Off Switch (P/N 10503) Ignitor Reset Button (P/N 11025) ON THE MAIN CHAMBER SIDE Upper Red Pilot Button (P/N 2123) Low er Red Pilot Button (P/N 2123) Gas Pressure Gauge (P/N 2001) Nieco Cor poration - Model 9025 ...

  • Broil King 9025 - page 11

    11 C.1 Controls and Indicator s (Cont.) (1) READ Y - Green indicator light when temperature set point is reached. (2) RESET - Clears broil chain error and silences warning alarm. (3) LCD SCREEN (4) SELECT - Used to access diff erent menus, screens , and to mov e the cursor arrow . Used to enter program mode. (5) SCROLL UP - Raises Time/T emperature ...

  • Broil King 9025 - page 12

    12 C.2 Lighting Procedures 1. Broiler is centered under hood and plugged in 2. Gas v alve is open when handle is in line (parallel to) the pipe 3. T ur n ventilation system on PILO TS MUST BE LIT WITHIN 5 MINUTES; IF Y OU EXCEED 5 MINUTES, PRESS THE RESET BUTT ON NEXT T O THE ON/OFF SWITCH AND REPEA T IGNITION PROCEDURES. IF REIGNI- TION F AILS, CO ...

  • Broil King 9025 - page 13

    13 C.2 Lighting Procedures (Cont.) MANU AL IGNITION - MAIN CHAMBER 1 Press and hold the LO WER PILO T BUTT ON (a) . Use match or long-stemmed lighter to light PILO T TUBES (b) . Light the pilot closest to the feed end of the broiler . After pilot has lit, hold pilot b utton f or 30 seconds, release and v er ify that lower b ur ners hav e lit. Repea ...

  • Broil King 9025 - page 14

    14 1. Allow the broiler to run free of any product f or 10 minutes . This will burn the chain clean. 2. T ur n off the Main P ower Switch (a) . 3. W ait for 30 minutes f or the broiler to cool. C.3 Shutdown Pr ocedures 2. Close the MAIN GAS V AL VE (b) V alve is closed when it is perpen- dicular to pipe a PLANNED SHUTDO WN W ARNING Alwa ys leave th ...

  • Broil King 9025 - page 15

    SELECT ENTER 15 SELECT ENTER ACTUAL SET MAIN xxxxF 0500F FLEX xxxxF 0500F SETUP EXIT C.4 Control Operation Left WHOPPR 01:50 Center CHICKN 03:45 Right CHICKN 03:45 MAIN XXXX F FLX XXXX F 1 T ur n Main P ower Switch on. Cop yright screen will illuminate for se ver al seconds showing software re vision number (2.15 at time of printing) follo wed by t ...

  • Broil King 9025 - page 16

    16 1 NORMAL R UN (OPERA TING) SCREENS The readout displa y actually has 8 lines, how e ver only 4 are visib le at a time. The first visible set sho ws cook times for the upper broil chains. The second set shows the return belt time and the time and date stamp . T o switch between the sets press the SELECT button. SELECT ENTER Left WHOPPR 01:50 Cent ...

  • Broil King 9025 - page 17

    17 1 BEL T SELECTION LEFT THICK CENTER RIGHT SELECT ENTER L C R F rom the nor mal operating screen - press and hold f or 5 seconds the BEL T y ou wish to change. F or example press LEFT (a). Belt selection choices are: LEFT (Main Chamber), CENTER and RIGHT (both Fle x Chamber). CHANGING PRESET COOK TIMES The 9025 control allows y ou to program m ul ...

  • Broil King 9025 - page 18

    18 1 BEL T SELECTION LEFT WHOPPER THICK BURGER CHICKEN CENTER RIGHT SELECT ENTER L 1 2 3 C R Press and hold f or 5 seconds the belt you wish to change. The Flex Chamber belts are controlled by the CENTER and RIGHT belt buttons . For e xample, press and hold the CENTER (a) button f or 5 seconds. CHANGING FLEX CHAMBER ELEMENT PO WER SETTINGS The fle ...

  • Broil King 9025 - page 19

    19 1 SELECT ENTER Press and hold SELECT (a) for 5 seconds to get to the TEMP SET screen. Press the SELECT (b) button to mo ve the cursor to point at SETUP , then press the ENTER (c) button. SETTING THE D A TE AND TIME SELECT ENTER SET CLOCK/CALENDAR MON DA/YR HR.MN.SC xxx xx/xx xx.xx.xx Exit 2 SC O SELECT ENTER Press the SELECT (a) button to mo ve ...

  • Broil King 9025 - page 20

    20 D . CLEANING AND DISASSEMBL Y T urn broiler off and c lose the main gas valve. Disconnect the power supply to the br oiler before c leaning or servicing. If this broiler is connected using a restraint, and disconnection of the restraint is necessary f or clean- ing or moving the br oiler , the restraint must be reconnected after the broiler has ...

  • Broil King 9025 - page 21

    21 Feed End Loader Base - P/N 11211 Reassemble 3 Disassemble Clean a. Wash b. Scrub c. Rinse d. Sanitize Pull release pin; lift right side and pull 27 Hold base by loader bar; pull release pin; tilt inside side up Insert outer side first; push loader bar to move base until pin engages Every 4 Hours Feed End Loader Co ver - P/N 11386 Reassemble 2 Di ...

  • Broil King 9025 - page 22

    22 Feed End Flex Slide - P/N 11755 Reassemble 5 Disassemble Clean a. Wash b. Scrub c. Rinse d. Sanitize Lift and pull 25 Hang slide on the brackets Every 4 Hours Feed End Loader Housing - P/N 11389 Reassemble 4 Disassemble Clean a. Wash b. Scrub c. Rinse d. Sanitize Lift and pull 26 Hang housing on the brackets Nieco Cor poration - Model 9025 CA UT ...

  • Broil King 9025 - page 23

    23 Feed End Main Chamber Ash Scraper T ra y P/N 11014 Reassemble 7 Disassemble Clean a. Wash b. Scrub c. Rinse d. Sanitize Pull out 23 Push in place and secure over channel Feed End Fr ont Hood Shield (NO T A NIECO P ART) Reassemble 6 Disassemble Clean Wipe down front and back surface Lift, pull off 24 If hinged shield; swing shield up Secure in pl ...

  • Broil King 9025 - page 24

    24 Feed End W arming Platens (2) 9 Clean a. Clean with sanitized water Do not scrub Do not use degreaser Clean with sanitized water after broiler cools b ut before grease becomes solid Feed End Upper Grease P ans (2) - MAIN P/N 10737/FLEX P/N 10452 Reassemble 8 Disassemble Clean a. Wash b. Degrease c. Scrub d. Rinse e. Sanitiz e Slide pan out 22 Sl ...

  • Broil King 9025 - page 25

    25 Feed End Feed End Ash Scraper Blades (2) - MAIN P/N 11016/FLEX P/N 11015 Reassemble 11 Disassemble Clean a. Wash b. Degrease c. Scrub d. Rinse e. Sanitiz e Lift off pins and pull out 20 Replace back under top chains; put notches on pins W eekly ✗ Make sure par t swings freely Feed End Feed End Grease T r oughs (2) MAIN P/N 11540/FLEX P/N 11542 ...

  • Broil King 9025 - page 26

    26 Sides Side P anels (2) - P/N 10747 Reassemble 13 Disassemble Clean a. Wipe clean b. No Scrub Lift off 18 Hook over corner supports Discharge End A wnings (2) - MAIN P/N 11837/FLEX P/N 11830 Reassemble 12 Disassemble Clean a. W ash b. Scrub (on inside only) c. Rinse d. Sanitiz e Tilt to unhook; lift pins off brackets; pull out 19 Slide up and und ...

  • Broil King 9025 - page 27

    27 Discharge End Stripper Blades (2) - MAIN P/N 10857/FLEX P/N 10856 Reassemble 15 Disassemble Clean a. Wash b. Degrease c. Scrub d. Rinse e. Sanitiz e Tilt awa y from c hain; lift off brackets 16 Put blade notches on supports on broiler Make sure blade is not hooked on upper grease pan or burner s and that it swings freel y Incorrect Discharge End ...

  • Broil King 9025 - page 28

    28 Discharge End Return Chains (2) - MAIN P/N 11412/FLEX P/N 11555 Reassemble 17 Disassemble Clean a. Wash b. Scrub c. Rinse d. Sanitize Pull and hold spring loaded pin 15 Pull and hold spring loaded pin Slide chain assembl y towar d front; line up coupling with engagement pin; rotate return chain until fully enga ged Lift front; pull chain assembl ...

  • Broil King 9025 - page 29

    29 Discharge End Lower Grease T ra ys (2) - MAIN P/N 11553/FLEX P/N 11551 Reassemble 18 Disassemble Clean a. Wash b. Scrub c. Rinse d. Sanitize Lift from grease tr ough slot; slide out 14 Slide into place; fit bracket into slot Discharge End Grease T r oughs (2) - MAIN P/N 10943/FLEX P/N 10943 Reassemble 19 Disassemble Clean a. Wash b. Degrease c. ...

  • Broil King 9025 - page 30

    30 W eekly Discharge End Dischar ge Ash Scrapers (2) - MAIN P/N 11006/FLEX P/N 11004 Reassemble 21 Disassemble Clean a. Wash b. Degrease c. Scrub d. Rinse e. Sanitiz e Rotate top out and pull 11 Rest scraper on the support rod; g ently push to ward feed end until scraper clic ks into place. Lift broil chain if need- ed If assembled bac kwards, the ...

  • Broil King 9025 - page 31

    31 Monthly Discharge End Lower Burner Shields (6) - P/N 10036 Reassemble 23 Disassemble Clean a. Wash b. Scrub c. Rinse d. Sanitize Lift out of slots; push back; lower to clear bar s; pull out 9 Rotate 90 ° ; slide into broiler above slots Rotate back 90 ° into position Monthly Discharge End Lower Burner s (6) - P/N 10532 Reassemble 22 Disassembl ...

  • Broil King 9025 - page 32

    32 Monthly To p Catalyst (if a vailable) - NO T A NIECO P ART Reassemble 24 Disassemble Clean Grasp handle and lift up to remove fr om shroud collar 8 Lift up, rotate 1/2 turn and fit over shr oud Handle should be at top W eekly Rinse with water only; air dry Do not use chemicals on a catalyst CA UTION: EXTREMEL Y HO T Rotate Nieco Cor poration - M ...

  • Broil King 9025 - page 33

    33 Monthly To p Main Chamber Upper Burners (4) - P/N 10590 Reassemble 27 Disassemble Clean Brush with surface facing down DO NO T USE W A TER Lift burner to dislodge; inspect f or holes in screens; replace burner if necessary CA UTION: BURNERS MUST BE COOL 5 Put end with tube facing outside frame; fit hole end into place and set down Make sure burn ...

  • Broil King 9025 - page 34

    34 Monthly To p Flex Chamber Element Reflector s (4) - P/N 10450 Reassemble 29 Disassemble Clean a. Wash b. Scrub c. Rinse Lift out 3 Place reflectors o ver element supports Correct Incorrect Monthly To p Main Chamber Reverberator s (4) - P/N 10151 Reassemble 28 Disassemble Clean a. Wash b. Scrub c. Rinse Slide off; inspect for breaks/dama ge; repl ...

  • Broil King 9025 - page 35

    35 Monthly To p Pilot Burners (4) 31 Clean Clean all pilot burner s and orifices Clean slot with a utility knife blade; clean orifices with Nieco Brush P/N 11731 Monthly Inside Orifices (10) 30 Clean Clean 4 upper burner orifices and 6 lower b urner orifices Clean main burner orifices with Nieco brush P/N 11731 Nieco Cor poration - Model 9025 ...

  • Broil King 9025 - page 36

    36 Nieco Cor poration - Model 9025 Monthly To p Flex Chamber Heating Elements (4) 33 Clean No cleaning needed Inspect for a smooth surface b y touching each element lightly feeling f or rough spots Inspect CA UTION: Must be fully cool! If you f eel rough spots - Ask for assistance Sides Flame Arrestors/Chain Supports (6) - MAIN P/N 10680/FLEX P/N 1 ...

  • Broil King 9025 - page 37

    37 Hood Grease Extractors - NO T A NIECO P ART Reassemble 35 Disassemble Clean a. Degrease b. Scrub c. Rinse Lift and pull to remove eac h extractor 1 Insert extractor; lift and secure in position Correct Incorrect Inside Frame and Cr oss Rod 34 Clean Using multipurpose tool f or cross r od Wipe down frame Frame Cross Rod Nieco Cor poration - Model ...

  • Broil King 9025 - page 38

    38 Nieco Cor poration - Model 9025 Hood T emperature Probe Shield - P/N 10755 Reassemble Disassemble Clean a. Degrease b. Scrub c. Rinse Lift up and out of broiler Note position for pr oper reassembly . Shield hangs on cross r od. Semi- annuall y Use a cloth with rubbing alcohol to c lean the temperature probes (Main and Flex) on a monthl y basis. ...

  • Broil King 9025 - page 39

    E. TR OUBLESHOO TING Prob lem Solution Pilots not lighting ❏ Check that broiler is plugged in, gas v alve is open and broiler is tur ned on ❏ The 5-minute time limit w as e xceeded - press the timer reset button ❏ Manually light if it is not a timer prob lem ❏ Check f or ignition ❏ Check f or clogged pilot Main burner s not lighting ❏ C ...

  • Broil King 9025 - page 40

    40 Return chain jams ❏ Remov e any obstruction if needed ❏ Press the blac k reset button located on the left (MAIN CHAMBER) side of the broiler control bo x (under neath). ❏ Check the motor driv e chain (bicycle chain) f or any obstructions or jams Product not cooking to proper temperature in cookouts ❏ Use proper cookout procedures per OPS ...

  • Broil King 9025 - page 41

    41 Meat patties not returning ❏ Check that patties ha ve not gotten stuc k on the retur n slide __ Remov e awnings to chec k __ Remov e product from retur n slide if necessar y __ Proper cleaning of retur n slide is needed daily to remov e buildup which can cause patties to stick ❏ Check return chain to see if patties are stuck in chain __ Remo ...

  • Broil King 9025 - page 42

    42 F . BR OIL CHAIN REMO V AL 1 Run chain until the master link is near the front idler shaft. 2 Remov e the loader brack et and lift shaft and teflon bearings up, and slide the bearings out. 3 Unhook the master link. Maintain proper tension on the conv ey or chains to prev ent jamming. Major tension adjustments are made by remo ving a link or link ...

  • Broil King 9025 - page 43

    43 G. P AR TS AND LOCA TIONS G.1 Main Chamber Remov able P ar ts ...

  • Broil King 9025 - page 44

    44 G.2 Flex Chamber Remo vable P ar ts ...

  • Broil King 9025 - page 45

    45 Nieco Cor poration - Model 9025 G.3 Feed End View Components Ther mocouple P/N 2024 Red Pilot Button P/N 2123 Gas Gauge P/N 2001 Main P ower Switch P/N 10503 Ignition Reset Switch P/N 11025 Red Pilot Button (2) P/N 2123 Upper Ther mocouple P/N 2101 Lower Thermocouple P/N 2024 Gas Gauge P/N 2001 K eypad Overla y P/N 10176 K eypad Circuit Board P/ ...

  • Broil King 9025 - page 46

    46 Nieco Cor poration - Model 9025 G.4 Main Chamber Side View Components ...

  • Broil King 9025 - page 47

    47 Nieco Cor poration - Model 9025 G.5 Flex Chamber Side Vie w Components ...

  • Broil King 9025 - page 48

    48 Nieco Cor poration - Model 9025 G.6 Model 9025 P arts List Nieco P/N Item 9025G GAS BURNER COMPONENTS 10590 Burner Box Assembly - 21 ” 12193 Lower T ube Bur ner 10036 Shield 28 ” T ube Burner 10151 Re verberator P erforated - 21 ” 9025G IGNITION & GAS SYSTEM 2067 Orifice, Upper Burner #51 2015 Or ifice, Low er Bur ner #48 2018 Pilot Or ...

  • Broil King 9025 - page 49

    49 H. WIRING DIA GRAM ...

  • Broil King 9025 - page 50

    50 I. SPECIFICA TIONS Benefits of A utomation Consistency V ersatility Speed Quality Fle xibility A UT OMA TIC B R OILER M ODEL 9025 I TEM N O . AIA 11400 Model 9025 The Nieco Model 9025 is the state of the ar t broiling system designed for maxim um v ersatility . The 9025 f eatures an automatic loader , computerized control, simplified ignition, d ...

  • Broil King 9025 - page 51

    51 D IMENSIONS INCH MM Length 40.00 1016 Height 67.43* 1712 Width 49.25 1251 * If your broiler is equipped with a catalyst add 1.5 ” to the ov erall height. A 2 ” stand e xtension is av ailable f or improv ed freezer clearance . E NERGY Gas connection: 1 ” N.P .T . Electrical Connection (specify exact v oltage): 208-240V 3 Ø 50/60Hz 23A Natu ...

  • Broil King 9025 - page 52

    52 J . W ARRANTY INFORMA TION Nieco Cor poration - Model 9025 1. Seller guarantees ne w Nieco automatic infrared equipment against def ective workmanship and materials for a period of twelv e months from the date of installation with the e xception of the inconel radiant surf aces, protectiv e shields, re verber ators, and electric broiling element ...

  • Broil King 9025 - page 53

    Nieco Cor poration • 7950 Cameron Drive • Windsor , CA 95492 • (707) 284-7100 Office • (707) 284-7430 F ax Reorder # 9999-25 3/02 www .nieco .com • e-mail: nieco@nieco .com Printed in the USA © 2002 Nieco Corporation ...

メーカー Broil King カテゴリー Oven

Broil King 9025のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 9025の取扱説明書
- Broil Kingの製品カード
- パンフレット
- またはBroil King 9025の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Broil King 9025の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Broil King 9025の取り付け説明書、サービスマニュアル、簡易説明書、またはBroil King 9025のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Broil King 9025の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Broil King 9025デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがBroil King 9025を使用するのを助ける技術的文書のことです。説明書は通常、全てのBroil King 9025ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Broil Kingの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Broil King 9025の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははBroil King 9025の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Broil King 9025に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Broil King 9025デバイスの基本機能を使うにあたってのヒント。 Broil King 9025のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Broil King 9025に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるBroil King 9025のメーカー/サービスへの連絡先に関する情報。

Broil King 9025についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもBroil King 9025の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBroil King 9025で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)