-
Eiki WL-10 - page 1
Memory V iew er Slide Con v er t er This is the manual for the Memory Viewer function. Read this manual thoroughly to operate the Memory Viewer function. First, read the owner's manual of the projector to understand the basic operation of the projector and the safety instructions. The safety instructions in the owner's manuals should be f ...
-
Eiki WL-10 - page 2
2 ...
-
Eiki WL-10 - page 3
English 3 Intr oduction Memory Viewer function The Memory Viewer function is to make a presentation or project an image without using computers or some other external equipment. You do not have to carry a computer or other equipment to project. Store presentation data or images on a dedicated USB memory and insert it into the USB terminal of the pr ...
-
Eiki WL-10 - page 4
4 Index Intr oduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. Pr eparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing the USB Memory . . . . . . . . . . . . . . . ...
-
Eiki WL-10 - page 5
Chapt er 1. Pr eparation 1 Read this chapter before use. 5 English ...
-
Eiki WL-10 - page 6
6 1. Pr epar ation USB USB Installing the USB Memory Install the optionally available USB memory to the USB terminal on the right side of the projector. When installing, confirm the direction of the plug not to damage the terminal. Use optionally available our USB memory (WL-10). If you use other product, the projector may not work properly. The US ...
-
Eiki WL-10 - page 7
Chapt er 2. Memory View er 2 7 English ...
-
Eiki WL-10 - page 8
8 2. Memory View er Ho w to Use the Memory V iewer F unction 1. Select Input Source The first image of the first index file stored in the USB memory is displayed on the screen. Cautions in Projecting Images The projector supports only JPEG, Bitmap and index data (.idx) which is edited with Slide Converter. Other data formats are not compatible. Use ...
-
Eiki WL-10 - page 9
English 9 3. Select an Image to be displayed. Press the Point buttons on the remote control or the top control of the projector to move the blue framed pointer to the index file to be displayed and then press the SELECT button. Images will be displayed following their configurations. A file not set as Auto Play Press the Point e button to project t ...
-
Eiki WL-10 - page 10
10 2. Memory Viewer q Move the red arrow pointer to "Rotation" and press the SELECT button. w Move the red framed pointer to the image you wish to rotate. e Press the SELECT button. Rotation menu will appear. Press the Point ed buttons to select the direction to rotate the image. Then press the SELECT button to execute the rotation. The i ...
-
Eiki WL-10 - page 11
English 11 q Move the red arrow pointer with the Point button to "Delete" and press the SELECT button. w Move the red framed pointer to the image you want to delete. e Press the SELECT button. Confirmation dialog box will appear. Select "Yes" to delete the image. X mark will be put over the deleted image. Note: To cancel the del ...
-
Eiki WL-10 - page 12
12 2. Memory Viewer q Move the red arrow pointer to "Reorder" and press the SELECT button. w Move the red framed pointer to the image you wish to move. e Press the SELECT button. A red bar appears at the left side of the selected image. Move the red bar to the position where the image to be placed and press the SELECT button. Confirmation ...
-
Eiki WL-10 - page 13
English 13 Au to Pla y Set ting Images in the Index file can be projected automatically. Select "Auto Play" in the projector menu and set the interval time between the images. Note: Interval time between images which is set in "Image Switch Timing Settings" (p22) is prior to this Auto Play setting. Auto Play Move the pointer to ...
-
Eiki WL-10 - page 14
14 ...
-
Eiki WL-10 - page 15
Chapt er 3. Slide Conv er ter 3 15 English ...
-
Eiki WL-10 - page 16
16 3. Slide Conv er t er About Slide Con ver ter Slide Converter is the software to edit and convert Bitmap, JPEG or PowerPoint files into image data to be projected with Memory Viewer function. This software has various unique edit functions to allow you to make effective presentations. Operating Environment This software requires the following co ...
-
Eiki WL-10 - page 17
English 17 Install Slide Converter on your computer. The software (Slide Converter) is included in the CD ROM provided with the projector. Refer to the owner's manual (Adittional Vol.) of the projector ➔ "2. Setup Procedures" ➔ "Installing the Software" ➔ step 3 to install the Slide converter. Activate Slide Converter ...
-
Eiki WL-10 - page 18
18 3. Slide Converter - Capture images on your computer screen [Image] -> [Screen Capture] Capture images on your computer screen and load it to the Edit screen of Slide Converter. If you select "Screen Capture", the following dialog box will appear. Parameter Description Capture..................Capture whole viewing area of the image ...
-
Eiki WL-10 - page 19
English 19 - Import PowerPoint data [Image] -> [Import PowerPoint File] Convert PowerPoint data to JPEG or Bitmap image and import it to the Edit screen of Slide Converter. *The computer needs to be installed PowerPoint software. Parameter Description Output ...................Import the image displayed on the screen. Output All ..............Im ...
-
Eiki WL-10 - page 20
20 3. Slide Converter - Open or add existing Index files [File] -> [Open Index] Select "Open Index" from File menu to open stored index files on Slide Converter. [File] -> [Add Index] Select "Add Index" from File menu to add another index file to the opened index file. Edit Image files - Cut / Copy / Paste / Delete Select ...
-
Eiki WL-10 - page 21
English 21 - Convert image size and file format Select an image then [Image] -> [Arrange Image File] -> [Convert Image] The following dialog box will appear. - Flip Image Vertically/Horizontally or Rotate [Image] -> [Arrange Image File] -> [Flip Image Vertically] / [Flip Image Horizontally] / [Rotate Image] Details for each item is as f ...
-
Eiki WL-10 - page 22
22 - Set the image switch timing Select an image then [Option] -> [Image Switch Timing Settings] Set the timing of switching images. Parameter Description Manual Advance ..............Switch images when pressing the Point ed buttons on the remote control or the top control of the projector. Automatic Timer ................Switch images at the in ...
-
Eiki WL-10 - page 23
English 23 Sav e / Delet e Data Select "Save as" from File menu. Image data is saved in Index format. [File] -> [Save As] Name the opened index file and save it on a USB memory drive. Save Index File screen will appear. Parameter Description USB Memory Drive ............ Specify a USB memory drive as the output destination to save the ...
-
Eiki WL-10 - page 24
24 [File] -> [Registered Index Order Setting] Select Index files you wish to display with the projector from those stored in the USB memory. Also arrange the files in the order to be displayed. Note: "The order to be displayed" means here is that the order of the thumbnails to be shown on the screen when you select "Index" fr ...
-
Eiki WL-10 - page 25
English 25 Other Functions [Image] -> [Image File Information] See the information of the selected image. - See information of the image file Parameter Description File Name ..............Show the file name. Address ................Show where the file is. File Size ................Show the data size. Format ..................Show the file format ...
-
Eiki WL-10 - page 26
Printed in Japan 1AA6PIP5073-- (IFBV) © 2006 Eiki International, Inc. ...
Eiki WL-10についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもEiki WL-10の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがEiki WL-10で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。