-
Sony Ericsson XCI-V3 - page 1
2006 Sony Corporation Intelligent Camera A-CJS-100- 01 (1) Technical Manual XCI-SX1 XCI-V3 ...
-
Sony Ericsson XCI-V3 - page 2
2 Ta b le of Contents Overview Features ..................................................................... 3 System Components ................................................. 4 Connection Diagram ................................................. 4 Location and Function of P ar ts and Contr ols ........ 5 F ront/T op/Bottom .................... ...
-
Sony Ericsson XCI-V3 - page 3
3 Overview Over vie w The XCI-SX1/V3 is a monochrome intelligent camera that can capture and process pictures, and control peripheral devices by itself. Features High image quality The XCI-SX1 (SXGA) has a progressive scan CCD of 1,450,000 pixels. The XCI-V3 (VGA) has a progressive scan CCD of 330,000 pixels. This camera produces high-resolution im ...
-
Sony Ericsson XCI-V3 - page 4
4 Overview System Components Intelligent camera XCI-SX1/V3 Camera cables CCXC-12P02N(2 m) CCXC-12P05N(5 m) CCXC-12P10N(10 m) CCXC-12P25N(25 m) C-mount lens XCI-SX1: High-resolution lens XCI-V3: VCL-50Y-M VCL-25Y-M VCL-16Y-M VCL-12YM VCL-08YM LAN cable (UTP, category 5) USB mouse/keyboard Camera adaptor DC-700/700CE Connection Dia gram USB mouse/key ...
-
Sony Ericsson XCI-V3 - page 5
5 Overview Location and Function of P ar ts and Contr ols Fr ont/T op/Bottom 1 Lens mount (C-mount) Attach any C-mount lens or other optical equipment. Note The lens must not project more than 10 mm (13/32 inch) from the lens mount. 2 Auxiliary reference screw holes (Top) 3 Tripod screw holes (Top) 4 Reference screw holes (Bottom) These precision s ...
-
Sony Ericsson XCI-V3 - page 6
6 Overview Rear POWER MONITOR ST A TUS MODE DC IN SERIAL RESET 89 61 6 54321 10 9876 15 14 13 12 11 43 2 5 q; 7 87654321 1234 qa qs qd qf LAN 6 MONITOR (monitor output) connector (15-pin) You can connect a monitor cable to this connector to display an image on a multiscan monitor supporting SXGA resolution. Note If you connect a multiscan monitor t ...
-
Sony Ericsson XCI-V3 - page 7
7 Overview Connecting the cab les 1 Monitor cable 6 MONITOR connector 2 USB cable 7 USB connector 3 LAN cable 8 DC IN connector 4 Camera cable 9 SERIAL connector 5 Serial cable 0 LAN connector Connect the camera cable to the DC IN connector. Also, if needed, connect the LAN cable to the LAN connector, the monitor cable to the MONITOR connector, the ...
-
Sony Ericsson XCI-V3 - page 8
8 Functions Functions 4.5 – 5.0 V (XCI-SX1) 4.5 – 24 V (XCI-V3) 0.0 – 0.5 V 2 µ s or more Input Specification The voltages and pulse widths are values that are measured by the DC IN (12-pin) and SERIAL (6-pin) connectors on the rear of the camera. Trigger input (DC IN 12-pin connector) Exposure output (DC IN 12-pin connector) The amplitude l ...
-
Sony Ericsson XCI-V3 - page 9
9 Functions T rigger mode This mode can be set on the SHUTTER screen in the GUI application for camera settings. In this mode video signals begin to accumulate by synchronizing with external trigger input. The video signals are output after the exposure is finished. The high-speed movement of objects can be captured with vivid clarity in this mode. ...
-
Sony Ericsson XCI-V3 - page 10
10 Functions Pa r tial scan mode This mode can be set using the HIGH RATE SCAN screen in the GUI application for camera settings. In this mode, the desired rectangle area is read out, and the redundant image area is transmitted at high speed to raise the frame rate. The read out area can be set separately as an effective image area vertically and h ...
-
Sony Ericsson XCI-V3 - page 11
11 Functions Frame rate tables when V-binning is ON (XCI-SX1) Number of vertical effective lines (L) 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 256 384 130 122 114 107 102 96 92 87 83 80 76 73 71 68 66 63 512 124 115 108 102 96 91 87 83 79 76 73 70 67 65 62 60 640 118 110 103 97 92 87 83 79 75 72 69 66 64 62 59 57 768 112 105 98 93 88 83 ...
-
Sony Ericsson XCI-V3 - page 12
12 Functions Frame rate table when V-binning is OFF (XCI-V3) Number of vertical effective lines (L) 30 60 90 120 150 180 210 240 270 300 330 360 390 420 450 480 192 419 333 277 236 206 183 165 149 137 126 117 109 102 96 91 86 256 396 315 262 224 195 173 156 141 129 119 111 103 97 91 86 81 320 376 299 248 212 185 164 148 134 123 113 105 98 92 86 81 ...
-
Sony Ericsson XCI-V3 - page 13
13 GUI application GUI application This unit has a graphical user interface (GUI) that allows you to easily set camera functions and modes on an SXGA monitor. The GUI application can be operated by a USB mouse connected with this unit. The following settings can be accomplished by using this application: •D isplay of camera images • Setting of ...
-
Sony Ericsson XCI-V3 - page 14
14 GUI application Basic operation To operate the GUI application, connect and use a USB mouse (use left clicks only). When you connect a USB keyboard with this unit, shortcut keys can be used. Regarding specific shortcut keys for each screen, refer to the HELP information by clicking on the on upper right of the screen. To move to a desired screen ...
-
Sony Ericsson XCI-V3 - page 15
15 GUI application HOME screen This screen is used for displaying the system conditions and initializing each setting. 1 System information display area The following system information is displayed on the HOME screen: Version – Hardware: Hardware version – Software: Software version Network – Hostname: Host name – IP Address: IP address ? ...
-
Sony Ericsson XCI-V3 - page 16
16 GUI application SHUTTER screen This screen is used for setting the shutter mode and shutter speed. You can select one of the following two shutter modes: •M onitoring mode • Trigger mode 1 Monitoring (normal mode) setting area XCI-SX1: In normal mode all individual video signals [1280 (H) × 1024 (V)] are output continuously at 15 frames per ...
-
Sony Ericsson XCI-V3 - page 17
17 GUI application Note When the cycle of the input trigger is smaller than the trigger delay value set, the image is not output correctly. Pay attention to this fact when you set the trigger delay value. 5 SOFTWARE TRIGGER button This button is used to capture an image immediately after pressing the button. 3 SAVE button This button is used to sav ...
-
Sony Ericsson XCI-V3 - page 18
18 GUI application 5 FULL SCREEN button This button is used to display a camera image on the full screen. 6 ? (HELP) button This button is used to display HELP information. Shortcut keys When you connect a USB keyboard with this unit, you can use the following shortcut keys in the GAIN/LUT screen: Shortcut Applicable button Alt + S SAVE Alt + C CAN ...
-
Sony Ericsson XCI-V3 - page 19
19 GUI application 3 Horizontal binning/partial scan setting area Partial Scan check-off box: You can select a specific portion of the image by using the partial scan function. Check off this box to display 2 sliders in the outer frame of the camera image. In order to specify the area for partial scan, drag any of the 2 sliders on the bottom sides ...
-
Sony Ericsson XCI-V3 - page 20
20 GUI application Shortcut keys When you connect a USB keyboard with this unit, you can use the following shortcut keys in the GENERAL screen: Shortcut Applicable button Alt + M Month Alt + S SAVE Alt + C CANCEL Alt + H HELP You can move between the items in the screen by pressing the tab key. NETW ORK screen This screen is used for setting the XC ...
-
Sony Ericsson XCI-V3 - page 21
21 GUI application Community: Community name administrated by the SNMP manager Description: Description of this unit Location: Location of this unit Contact: Administrator contact information 3 NTP (Network Time Protocol) The protocol setting to synchronize the internal clock of this unit with the NTP server is made in this area. Input the time zon ...
-
Sony Ericsson XCI-V3 - page 22
22 External Control Commands External Contr ol Commands Overview The XCI-SX1/V3 can be controlled externally from a host device via a serial communication and telnet using such communication softwares as “HyperTerminal” or “Tera Term.” Serial Comm unication Specifications The serial communication system for the XCI-SX1/V3 is an asynchronous ...
-
Sony Ericsson XCI-V3 - page 23
23 External Control Commands Note The password entered is replaced with “*” on the monitor. When you enter the correct password, the following message appears and the external command input is validated. Welcome to the Sony Smart Camera Configuration Environment When you enter a login account other than “admin” or the wrong password, the fo ...
-
Sony Ericsson XCI-V3 - page 24
24 External Control Commands Command Specifications This section describes the details of control commands available for the XCI-SX1/V3, classified by category. The underlined words of the [Command] represent parameters. The bold words of the <Example> represent commands, and the others the response to the command. Serial Communication Settin ...
-
Sony Ericsson XCI-V3 - page 25
25 External Control Commands <Example> • Example of settings for SNMP (1) setup snmp on/11.22.33.44/public/ Sony Smart Camera/Tokyo/ 9876<CR> setup save complete snmp<CR> setup applying new SNMP settings...<CR> • Example of settings for SNMP (2) setup snmp on////Shinagawa Office/mail@contact.com<CR> setup save comp ...
-
Sony Ericsson XCI-V3 - page 26
26 External Control Commands ■ Help of the Date Setting [Command] setup date - -help [Process] Displays the help of the Date Setting command. Note You can set the DATE settings when NTP setting is set to off. When NTP setting is set to on, the following messages are displayed. setup date 10-01-2006<CR> warning: NTP mode is currently set to ...
-
Sony Ericsson XCI-V3 - page 27
27 External Control Commands Camera Administrator: Pedestal Level Setting ■ Pedestal Level Setting [Command] pedestal LVL [Parameter] LeVeL: 0 to 255 (1step) [Process] Sets the pedestal level. <Example> Setting the pedestal level to 128 pedestal 128<CR> camera pedestal complete<CR> ■ Auto Pedestal Level Settings [Command] pede ...
-
Sony Ericsson XCI-V3 - page 28
28 External Control Commands Camera Shutter: Trigger Polarity Setting ■ Trigger Polarity Setting [Command] shutter -p POL [Parameter] POLarity: posi, nega [Process] Sets the polarity of the external trigger pulse. <Example> Setting the trigger pulse to positive shutter -p posi<CR> camera shutter polarity complete<CR> ■ Current ...
-
Sony Ericsson XCI-V3 - page 29
29 External Control Commands ■ Transferring the LUT Binary [Command] lut transfer [Process] Transfers the binary file of 1024 bytes using the Kermit protocol. <Example> lut transfer<CR> G-Kermit CU-1.00, Columbia University, 1999-12-25 Escape back to your local Kermit and give a SEND command. KERMIT READY TO RECEIVE...<CR> Note ...
-
Sony Ericsson XCI-V3 - page 30
30 External Control Commands ■ Help of the Partial Scan Setting [Command] partial - -help [Process] Displays the help of the Partial Scan Setting command. Version Information Request ■ Version Information Request [Command] version [Process] Displays the model name and software version. Status Request ■ Status Request [Command] status [Process ...
-
Sony Ericsson XCI-V3 - page 31
31 External Control Commands Loading the Camera Settings ■ Loading the Camera Settings [Command] load [Process] Loads the camera settings. Note After loading, the camera’s basic settings are reconfigured (except for the CDS gain, pedestal level, TRGINH and DMAINH). Ethernet Mode Setting ■ Ethernet Setting [Command] setup ether MODE [Parameter ...
-
Sony Ericsson XCI-V3 - page 32
32 External Control Commands ■ Help of the TRGINH Setting [Command] trginh - -help [Process] Displays the help of the TRGINH Setting command. Camera DMAINH Setting ■ DMAINH Setting [Command] dmainh VALUE [Parameter] VALUE: on, off on: Prohibits the camera block from transferring the image signal. off: Allows transfer of the image signals [Proce ...
-
Sony Ericsson XCI-V3 - page 33
33 External Control Commands Camera GRAY Setting (XCI-V3 only) ■ GRAY Setting [Command] gray PATTERN [Parameter] PATTERN: -ccd, pscan, grad1 or grad2 ccd: Outputs CCD image. pscan: Outputs test pattern 1 grad1: Outputs test pattern 2. grad2: Outputs test pattern 3. [Process] Sets the output from among the CCD image and the test patterns. <Exam ...
-
Sony Ericsson XCI-V3 - page 34
34 Specifications Specifications Specifications XCI-SX1 Imaging sensor system Pickup device Progressive scan 1/2 type CCD CCD effective picture elements 1392 × 1040 (horizontal/ vertical) CCD vertical drive frequency 15.995 kHz CCD horizontal drive frequency 27.0 MHz Cell size 4.65 × 4.65 µm (horizontal/ vertical) Chip size 7.6 × 6.2 mm (horizo ...
-
Sony Ericsson XCI-V3 - page 35
35 Specifications XCI-V3 Imaging sensor system Pickup device Progressive scan 1/3 type CCD CCD effective picture elements 659 × 494 (horizontal/vertical) CCD vertical drive frequency 31.37 kHz CCD horizontal drive frequency 24.47 MHz Cell size 7.4 × 7.4 µm (horizontal/ vertical) Chip size 5.79 × 4.89 mm (horizontal/ vertical) LUT γ = OFF/ON, R ...
-
Sony Ericsson XCI-V3 - page 36
36 Specifications Spectral Sensitivity Characteristics (T ypical V alues) XCI-SX1 (Lens characteristics included, and light source characteristics excluded.) Relative Response 0 0.2 0.4 0.6 0.8 0.1 0.3 0.5 0.7 0.9 1.0 Wave Length [nm] 400 600 800 1000 500 700 900 XCI-V3 (Lens characteristics and light source characteristics excluded.) ...
-
Sony Ericsson XCI-V3 - page 37
37 Specifications Dimensions Unit: mm (inches) POWER MONITOR ST A TUS MODE DC IN LAN SERIAL RESET Sony reserves the right to change specifications of the products and discontinue products without notice. Technical information contained herein is for reference only and does not convey any license by any implication or otherwise under any intellectua ...
Sony Ericsson XCI-V3についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもSony Ericsson XCI-V3の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSony Ericsson XCI-V3で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。