ACCO Brands NOBOの取扱説明書

37ページ 2.81 mb
ダウンロード

ページに移動 of 37

Summary
  • ACCO Brands NOBO - page 1

    1 ... English T able of Contents ......................................................................................... 1 Usage Notice ................................................................................................ 2 Precautions ..................................................................................................... ...

  • ACCO Brands NOBO - page 2

    2 English ... Usage Notice Precautions Follow all warnings, pr ecautions and maintenance as recom - mended in this user ’ s guide to maximize the life of your unit. Excessive use of your unit may invalidate your warranty (normal use defined as 8 hours a day 5 days a week). W arning- Do not look into the projector ’s lens when the lamp is on. Th ...

  • ACCO Brands NOBO - page 3

    3 ... English Usage Notice Do:  Turn off the product before cleaning.  Use a soft cloth moistened with mild detergent to clean the display housing.  Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t:  Block the slots and openings on the unit provided for ventilation.  Use abr ...

  • ACCO Brands NOBO - page 4

    ...

  • ACCO Brands NOBO - page 5

    ...

  • ACCO Brands NOBO - page 6

    ...

  • ACCO Brands NOBO - page 7

    7 ... English Introduction Control Panel 1. Power Indicator LED 2. Temp Indicator LED 3. Lamp Indicator LED 4. Keystone Correction 5. Power/Standby 6. Re-Sync 7. Source 8. Four Directional Select Keys 9. Menu (On/Off) 10. Enter 4 4 5 9 6 7 2 3 1 10 8 ...

  • ACCO Brands NOBO - page 8

    8 English ... Introduction Connection Ports 1. IR Receiver 2. USB Connector 3. Monitor Loop-through Output Connector 4. Composite Video Input Connector 5. S-Video Input Connector 6. Audio Input Connector 7. PC Analog signal/SCART RGB/HDTV/Component Video Input Connector 8. PC Analog signal/HDTV/Component Video Input Connector 9. Kensington TM Lock ...

  • ACCO Brands NOBO - page 9

    9 ... English Introduction Wireless Remote Control 1. Power 2. IR LED 3. Hide 4. Freeze 5. D-Zoom 6. Display Mode 7. Menu 8. Keystone Correction 9. Re-Sync 10. Volume + 11. Volume - 12. Reset 13. Enter 14. Four Directional Select Keys 15. VGA1 Source 16. VGA2 Source 17. Composite Video Source 18. S-Video Source 4 5 6 15 9 10 11 13 2 7 12 17 16 18 1 ...

  • ACCO Brands NOBO - page 10

    ...

  • ACCO Brands NOBO - page 11

    11 ... English Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will flash green. 3. Turn on the lamp by pressing “Power/Standby” button on the control panel. The Power LED will turn green. The first time you use the projector, you can select your preferred ...

  • ACCO Brands NOBO - page 12

    12 English ... Installation W arning Indicator When the “LAMP” indicator lights solid r ed, the projector will automatically shut itself down. Please contact your local r eseller or service center (refer to pages 33~34). When the “TEMP” indicator lights solid r ed for about 60 seconds, it indicates the pr ojector has overheated. The pr ojec ...

  • ACCO Brands NOBO - page 13

    1 2 3 3 13 ... English Installation Adjusting the Projected Image Adjusting the Projector Image Height T ilt Adjusting Feet Elevator Foot 2 3 Elevator Button The pr ojector is equipped with an elevator foot for adjusting the image height. T o raise the image: 1. Pr ess the elevator button . 2. Raise the image to the desir ed height angle , then r e ...

  • ACCO Brands NOBO - page 14

    ...

  • ACCO Brands NOBO - page 15

    15 ... English User Controls Remote Control Control Panel Control Panel & Remote Control There are two ways for you to control projector functions: Remote Control and Control Panel. Using the Control Panel Power/Standby  Refer to the “Power On/Off the Projector” section on pages 11-12. Source  Press “Source” to choose RGB, Compone ...

  • ACCO Brands NOBO - page 16

    16 English ... User Controls Using the Remote Control Power  Refer to the “Power On/Off the Projector” section on pages 11-12. Re-Sync  Automatically synchronises the projector to the input source. Volume + / - (Vol+/Vol-)  Increases/decreases speaker volume. Reset  Changes the adjustments and settings to the factory default value. ...

  • ACCO Brands NOBO - page 17

    The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu ” on the Remote Control or Control Panel. 2. When OSD is displayed, use keys to select any item in the main menu ...

  • ACCO Brands NOBO - page 18

    Menu Tree English/Deutsch/Français/Italiano/Español/ Português/Nederlands/Polski 18 English ... User Controls ...

  • ACCO Brands NOBO - page 19

    Language Language Choose the multilingual OSD menu . Use the or key to select your preferr ed language. Press “Enter” to finalise the selection. 19 ... English User Contr ols Engl i sh Fran ç a i s Deutsch Ital i ano Espa ñ ol Polsk i Portugu ê s Nederlands ...

  • ACCO Brands NOBO - page 20

    20 English ... User Contr ols Image-I Display Mode There ar e many factory pr esets optimised for various types of images. PC: For computer or notebook. Movie: For home theater . Game : For game. sRGB: For standard colour . User: Memorise user ’s settings. Brightness Adjust the brightness of the image. Press the to darken the image. Press the to ...

  • ACCO Brands NOBO - page 21

    maximum peaking. If you prefer a str onger image, adjust towar ds the maximum setting. For a smooth and more natural image, adjust towards the minimum setting. Colour T emp. Adjust the colour temperature. At a higher temperature, the scr een looks colder; at a lower temperature, the scr een looks warmer . 21 ... English User Contr ols ...

  • ACCO Brands NOBO - page 22

    Image-II (Computer Mode) Frequency “Frequency”changes the display data frequency to match the frequency of your computer’s graphic card. If you experience a vertical flickering bar, use this function to make an adjustment. Tracking “Tracking” synchronises the signal timing of the display with the graphic card. If you experience an unstab ...

  • ACCO Brands NOBO - page 23

    16:9 Image Position Adjust the image position to up or down, when you select the aspect ratio to 16:9. Press the to move the image down. Press the to move the image up. W indow Original Pixel 16:9 Image Position: O O O Image Position at win- dow mode will also be moved accordingly . 23 ... English User Contr ols ...

  • ACCO Brands NOBO - page 24

    User Contr ols Image-II (V ideo Mode) Degamma This allows you to choose a degamma table that has been fine- tuned to bring out the best image quality for the input. Saturation Adjusts a video image from black and white to fully saturated colour . Press the to decrease the amount of colour in the image. Press the to increase the amount of colour in ...

  • ACCO Brands NOBO - page 25

    16:9 Image Position Adjust the image position to up or down, when you select the aspect ratio to 16:9. Press the to move the image down. Press the to move the image up. W indow Original Pixel 16:9 Image Position: Image Position at win- dow mode will also be moved accordingly . 25 ... English User Contr ols O O O ...

  • ACCO Brands NOBO - page 26

    ...

  • ACCO Brands NOBO - page 27

    ...

  • ACCO Brands NOBO - page 28

    Security Settings A. Press “Enter” to set passwor d. (First time) 1. Password must be 4~8 bits, the default value is “0000”. 2. Displayed on the screen by “*” while inputting. 3. Use keys to select your input bits, and then press “Enter” key to confirm your selection. 4. Move to and then press the “Enter” key to confirm final ...

  • ACCO Brands NOBO - page 29

    1. Input the old passwor d. 2. Changes a new passwor d. 3. Confirms the passwor d, please input the new password once again. 4. Passwor d must be 4~8 bits, Default value is “0000”. 5. Displayed on the scr een by “*” while inputting. 6. Use keys to select your input bits, and then pr ess the “Enter” key to confirm your selection. 7. Mo ...

  • ACCO Brands NOBO - page 30

    Lamp Hours Display the cumulative lamp operating time. Lamp Reset Reset the lamp life hour after replacing a new lamp. Lamp Reminding Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will show up 30 hours before end of life. ECO Mode Choose “On” to dim the projector lamp which ...

  • ACCO Brands NOBO - page 31

    Problem: No image appears on screen Ensure all the cables and power connections ar e corr ectly and securely connected as described in the “Installation” section. Ensure the pins of connectors ar e not cr ooked or broken. Check if the projection lamp has been secur ely installed. Please refer to the “Replacing the lamp” section (page 35). M ...

  • ACCO Brands NOBO - page 32

    5. Select the “Change” button under the “Monitor” tab . 6. Click on “Show all devices.” Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. If you are using a Notebook: 1. First, follow the steps above to adjust resolution of the computer . 2. Press the toggle outpu ...

  • ACCO Brands NOBO - page 33

    Make sure the pr ojection screen is between the r equir ed distance 4.9 to 39.4 feet (1.5 to 12.0 meters) from the pr ojector (r efer to page 14). Problem: The image is stretched when displaying 16:9 DVD The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting. If the image is s ...

  • ACCO Brands NOBO - page 34

    Appendices Problem: Message Reminders Fan failed: Over temperature: Replacing the lamp: Password err or : T ime out: 34 English ... Appendices O O O O O ...

  • ACCO Brands NOBO - page 35

    35 ... English Appendices Replacing the lamp The pr ojector will detect the lamp life itself. It will show you a warning message “ ” When you see this message, change the lamp as soon as pos- sible. Make sur e the projector has cooled down for at least 30 minutes befor e changing the lamp. W arning: Lamp compartment is hot! Allow it to cool dow ...

  • ACCO Brands NOBO - page 36

    ...

  • ACCO Brands NOBO - page 37

    Please note that damage resulting fr om incorrect installation will invalidate the war- ranty . Ceiling Mount Installation 1. T o prevent damaging your pr ojector , please use the ceiling mount package for installation. 2. If you wish to use a thir d party ceiling mount kit, please ensur e the screws used to attach a mount to the pr ojector meet th ...

メーカー ACCO Brands カテゴリー Projector

ACCO Brands NOBOのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- NOBOの取扱説明書
- ACCO Brandsの製品カード
- パンフレット
- またはACCO Brands NOBOの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、ACCO Brands NOBOの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、ACCO Brands NOBOの取り付け説明書、サービスマニュアル、簡易説明書、またはACCO Brands NOBOのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、ACCO Brands NOBOの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

ACCO Brands NOBOデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがACCO Brands NOBOを使用するのを助ける技術的文書のことです。説明書は通常、全てのACCO Brands NOBOユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

ACCO Brandsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. ACCO Brands NOBOの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははACCO Brands NOBOの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。ACCO Brands NOBOに関してこのドキュメントで見つけることができる全てのヒントの目次
3. ACCO Brands NOBOデバイスの基本機能を使うにあたってのヒント。 ACCO Brands NOBOのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。ACCO Brands NOBOに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるACCO Brands NOBOのメーカー/サービスへの連絡先に関する情報。

ACCO Brands NOBOについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもACCO Brands NOBOの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがACCO Brands NOBOで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)