Roberts CR2002の取扱説明書

24ページ 1.18 mb
ダウンロード

ページに移動 of 24

Summary
  • Roberts CR2002 - page 1

    CR2002 3 band Auto set PLL Synthesised Clock Radio Please read this manual before use ROBER TS Sound for Generations ...

  • Roberts CR2002 - page 2

    Controls ........................................................................... 2-4 Display ............................................................................... 5 Automatic clock setting ...................................................... 6 MSF radio signal ................................................................ 7 Manual ...

  • Roberts CR2002 - page 3

    If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 2 Controls 1. Time/Date and Alarm set button 2. Preset memories and Alarm days buttons 3. Tuning Up/Down and Snooze button 4. Waveband and Alarm mode button 5. Time capsule (Top) 2 13 4 5 ...

  • Roberts CR2002 - page 4

    3 Controls (Front) 6. Date button 7. Time button 8. Alarm 2 button 9. Alarm 1 button 10. Headphone socket (on end) 9 8 7 6 12 13 14 15 16 11. Volume control (on end) 12. On/Off and sleep button 13. Nap button 14. Display button 15. Light button 16. LCD display 11 10 ...

  • Roberts CR2002 - page 5

    If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 4 Controls (Base) 15. Time zone switch 16. Reset button 17. Alarm sound level control (buzzer alarm only) 15 16 17 ...

  • Roberts CR2002 - page 6

    5 C B A OM L K J I H F E A. Waveband and clock AM/PM display B. Time set indicator C. Summer time indicator D. Alarm indicators E. Sleep indicator F. Nap indicator G. Date indicator D H. Day of week indicators I. Month, date, year and alarm time indicators J. MSF indicator K. Auto tuning indicator L. Memory and seconds indicator M. Minute indicator ...

  • Roberts CR2002 - page 7

    If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 6 Automatic clock setting 1. Place your radio on a flat surface and connect the mains plug to a wall socket and switch on the wall socket. Your clock radio will display -:-- and the MSF indicator will flash in the display. The MSF signal level will also ...

  • Roberts CR2002 - page 8

    7 Automatic clock setting 5. After approximately 3 minutes your clock radio will synchronise to the official UK standard time signal transmitter (MSF) located at Rugby in the U.K. The MSF indicator will stop flashing and the correct time and date will appear in the display. Once synchronised to the radio time signal your clock radio will automatica ...

  • Roberts CR2002 - page 9

    If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 8 Manual clock setting (only if automatic setting fails) 1. Press the Time button , display will flash . 2. Press the Set button , the hour digits will flash in the display. 3. Press the up or down button to adjust the hours. The LCD clock uses a 12 hou ...

  • Roberts CR2002 - page 10

    9 Setting the date (only if automatic setting fails) 1. Press the Date button , DATE will flash in the LCD display. 2. Press the Set button , Year will flash in the LCD display. 3. Press the up or down button to adjust the year. 4. Press the Set button , Month will flash in the LCD display. 5. Press the up or down button to adjust the month. 6. Pre ...

  • Roberts CR2002 - page 11

    If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 10 Operating the radio Your clock radio is equipped with three tuning methods:- Scan tuning, Manual tuning and Memory preset tuning. When switched-on your clock radio will display the waveband and frequency in use. Scan tuning 1. Press the On/Off button ...

  • Roberts CR2002 - page 12

    11 Manual tuning 1. Press the On/Off button to switch on your radio. 2. Select the required waveband by repeatedly pressing the Band button . On the FM waveband fully extend the Wire aerial located on the rear of your clock radio - for MW and LW rotate your clock radio for best reception. 3. A single press on either the up or down button will chang ...

  • Roberts CR2002 - page 13

    If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 12 Presetting stations There are 7 memory presets for each of the 3 wavebands. 1. Press the On/Off button to switch on the radio. 2. Tune to the required station using one of the methods previously described. 3. Press and hold down the required Preset b ...

  • Roberts CR2002 - page 14

    13 Recalling a preset station 1. Press the On/Off button to turn on the radio. 2. Select the required waveband by repeatedly pressing the Band button. 3. Momentarily press the required Preset button , the preset number and station frequency will appear in the display. 3 1 2 ...

  • Roberts CR2002 - page 15

    If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 14 Alarms Your clock radio is equipped with two alarms which can be operated independently of each other. Each of the alarms can be set so that you wake to either the radio or buzzer alarms. The alarms can be set with the radio switched On or Off. Setti ...

  • Roberts CR2002 - page 16

    15 Setting alarms to wake to radio (continued) 6. Press the Day of week buttons to select required days of week on which the alarm will sound. Display will shows day of week on which alarm will sound e.g. 7. Repeatedly press and release Mode button until the radio alarm symbol or appears in the display. 8. Press the Alarm 1 or Alarm 2 buttons to co ...

  • Roberts CR2002 - page 17

    If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 16 Setting alarms to wake to buzzer A beep tone will sound when using the buzzer alarm. The alarm beep will increase in volume every 15 seconds for one minute followed by one minutes silence before repeating the cycle. The buzzer alarm will sound for on ...

  • Roberts CR2002 - page 18

    17 1 1 Setting alarms to wake to buzzer (continued) 6. Press the Day of week buttons to select required days of week on which the alarm will sound. Display will shows day of week on which alarm will sound e.g. 7. Repeatedly press and release Mode button until the buzzer alarm symbol or appears in the display. 8. Press the Alarm 1 or Alarm 2 to conf ...

  • Roberts CR2002 - page 19

    If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 18 Alarm sound level control 1. With the aid of a small screwdriver the alarm sound level on both radio and buzzer alarms can be adjusted using the Alarm sound level control located on the underside of your clock radio. Nap timer 1. The Nap timer is a s ...

  • Roberts CR2002 - page 20

    19 Display button 1. When the radio is switched on you can change between station frequency and normal time display by pressing the Display button . 1 Display back light 1. The display backlight can be switched on or off by pressing the button . 1 Sleep timer The sleep timer will automatically switch off your clock radio after a preset time has ela ...

  • Roberts CR2002 - page 21

    If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 20 Time zone switch The Time zone switch is used to provide offsets of -1 to + 2 hours relative to GMT (UTC). This facility would only be used if your clock radio is used in another country that is within range of the UK time signal transmitter e.g. Fra ...

  • Roberts CR2002 - page 22

    21 Specifications Power Requirements Mains AC 230 volts, 50Hz only Frequency Coverage FM 87.5-108MHz MW 522- 1629kHz LW 153- 279kHz Loudspeaker 75mm x 100mm 8ohms Output Power 800 mW Headphone socket 3.5mm dia Aerial System FM Wire aerial MW Built-in Ferrite aerial LW Built-in Ferrite aerial Troubleshooting 1. If the time does not set automatically ...

  • Roberts CR2002 - page 23

    If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 22 The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be connected to the terminal marked L or coloured RED. Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363 ...

  • Roberts CR2002 - page 24

    Issue 1 ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours) Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure ...

メーカー Roberts カテゴリー Clock Radio

Roberts CR2002のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- CR2002の取扱説明書
- Robertsの製品カード
- パンフレット
- またはRoberts CR2002の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Roberts CR2002の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Roberts CR2002の取り付け説明書、サービスマニュアル、簡易説明書、またはRoberts CR2002のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Roberts CR2002の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Roberts CR2002デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがRoberts CR2002を使用するのを助ける技術的文書のことです。説明書は通常、全てのRoberts CR2002ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Robertsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Roberts CR2002の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははRoberts CR2002の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Roberts CR2002に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Roberts CR2002デバイスの基本機能を使うにあたってのヒント。 Roberts CR2002のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Roberts CR2002に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるRoberts CR2002のメーカー/サービスへの連絡先に関する情報。

Roberts CR2002についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもRoberts CR2002の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがRoberts CR2002で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)