Toa 15RTCの取扱説明書

26ページ 1.18 mb
ダウンロード

ページに移動 of 26

Summary
  • Toa 15RTC - page 1

    15 INCH PREMIUM TFT-LCD CCTV MONITOR 15RTC INSTRUCTION MANUAL Please read this manual thoro ugh ly before us e, and keep it han dy for future reference. ...

  • Toa 15RTC - page 2

    SAFETY INSTRUCTION……………………………… …………………………………….2 – 3 1. Important Safety Instructions ………………………………… …………………………2 – 3 2. Safety Precautions ………………………… …………………………………… ……….3 CAUTIONS ……………? ...

  • Toa 15RTC - page 3

    Important Safety Instructions 1). Read these instructions 2). Keep these instructions.. 3). Heed all warnings. 4). Follow all instructions. 5). Do not use this apparatus near water. 6). Clean only with dry cloth. 7). Do not block any ventilation opening s. Install in accordance with the maufacturer’s instructio ns. 8). Do not install near any hea ...

  • Toa 15RTC - page 4

    - The apparatus shall not be exposed to dri pping or spl ashing and that no objects filled with liquids, such as vases, shall be placed on the app aratus. - Minimum distances(e.g. 10cm)around the apparatu s for sufficient ventilation. “ WARNING - To reduce the risk of fire o r electric shock, do not expose the apparatus to rain or moisture.” ? ...

  • Toa 15RTC - page 5

    CAUTION k The power supply cord is used a s the m a in disconne ct device, ensure that the socket-outlet is located/installed near the equipme nt and is ea sily accessible. ATTENTION N Le cordon d`alimentation est utillsé co mme interrupteur général. La prise de courant doit être située ou installée à prox imité du matériel et être fa cil ...

  • Toa 15RTC - page 6

    NOTE This equipment has been tested and fou nd to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. T hese limits are designed to provide rea sonable protection against harmful interference i n a residential installation. This equipment generates, use s and ca n radiate r adio frequency energy and, if not in ...

  • Toa 15RTC - page 7

    A. SIDE PANEL CONTROL 1. DC 12V IN 2. D-SUB IN PC Signal Input 3. VIDEO 1(AV1) IN Composite signal Input for AV1 4. VIDEO 1(AV1) OUT Video looping output for AV1 5. VIDEO 2(AV2) IN Composite signal Input for AV2 6. VIDEO 2(AV2) OUT Video looping output for AV2 7. AUDIO 1 IN Stereo Audio Signal Input, This input is for AV1, S-VIDEO 8. AUDIO 2 IN Ste ...

  • Toa 15RTC - page 8

    B. REMOTE CONTROLLER 1. POWER( ) Turns the power ON or O FF. There will be a few seconds delay before the d isplay appears. 2. SOURCE Select pc or video( AV1 / AV2 / S-Video / PC ) sources. 3. APC (Auto Picture Control) Select picture mode. 4. ACC (Auto Colour Control) Select Colour mode. 5. AV1 Select AV1 mode 6. AV2 Select AV2 mode 7. S-VIDEO Sel ...

  • Toa 15RTC - page 9

    1 / 2. VOL ◀▶ Adjust the volume / Adjust menu settings. 3 / 4. ▲ / ▼ This button allows user to enter t he sub-menu of the activated function 5. SOURCE/SELECT Select PC or video source. Select On Screen Display menu 6. MENU / EXIT Activates and exits the On Screen Display. 7. POWER ON/OFF( ) Turns the power ON or O FF. There will be a few s ...

  • Toa 15RTC - page 10

    OSD MENU DESCRIPTION A: CUSTOM MENU (Only Video mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Cu stom menu. Press the up( ▲ ) / down( ▼ ) button to sel ect Cu stom sub menu. Press the left(◀) / right( ▶ ) button to adjust picture setting. Press the MENU button to save. Brightness : Increase or decrease th ...

  • Toa 15RTC - page 11

    A: CUSTOM MENU (Only PC mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Cu stom menu. Press the up( ▲ ) / down( ▼ ) button to sel ect Cu stom sub menu. Press (◀) / right( ▶ ) button to adjust pict ure setting. Press the MENU button to save. INSTRUCTION MANUAL ……………………………………… ? ...

  • Toa 15RTC - page 12

    B. Picture / Sound Menu(Only Video mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Picture / Sound. Press the right( ▶ ) or ENTER button. 1. Picture Mode Press the up( ▲ ) / down( ▼ ) button to sel ect the Picture Mode. Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to s ...

  • Toa 15RTC - page 13

    2. Color Tone Press the up( ▲ ) / down( ▼ ) button to sel ect the Col or Tone. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button to select the d esired color tone. Press the MENU button to save. INSTRUCTION MANUAL ……………………………………… …………………………………… 12 ...

  • Toa 15RTC - page 14

    3. Mute Press the up( ▲ ) / down( ▼ ) button to select the Mute. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button t o select the desired Mute. Press the MENU button to save. 13 ………………………………… ………………………………………… INSTRUCTION MANUAL ...

  • Toa 15RTC - page 15

    4. Volume Press the up( ▲ ) / down( ▼ ) button to select the Volume. Press (◀) / right( ▶ ) button to adjust Volume. Press the MENU button to save. 5. PC (Only PC mode) Press the up( ▲ ) / down( ▼ ) button to sel ect the PC Press the ▶ or ENTER button INSTRUCTION MANUAL ……………………………………… ………………? ...

  • Toa 15RTC - page 16

    Press the up( ▲ ) / down( ▼ ) button to sel ect PC sub m enu Press the right( ▶ ) or ENTER button and then left (◀ ) / right( ▶ ) button to adjust PC setting. Press the MENU button to save. Auto Adjust: Auto geometry adjustment Phase: Adjust the number of horizontal picture elem e nts. H. position: Move image horizontally on screen right ...

  • Toa 15RTC - page 17

    1.Reset Press ENTER button to select the reset Reset : Select to reset all setting to the factory default values. INSTRUCTION MANUAL ……………………………………… ……………………………………… 16 ...

  • Toa 15RTC - page 18

    2. Language Press the up( ▲ ) / down( ▼ ) button to sel ect the Lan gu age menu. Press the right( ▶ ) or ENTER button. Press the up( ▲ ) / down( ▼ ) button to sel ect lang uag e. Press the MENU button to save. 17 ………………………………………………… ………………………… INSTRUCTION MANUAL ...

  • Toa 15RTC - page 19

    3. OSD Tone Press the up( ▲ ) / down( ▼ ) button to sel ect the OSD t one menu. Press the right( ▶ ) or ENTER button Press the up( ▲ ) / down( ▼ ) button to sel ect the de sire OSD Tone. Press the MENU button to save. INSTRUCTION MANUAL ……………………………………… ……………………………………… 18 ...

  • Toa 15RTC - page 20

    4. Blue Screen Press the up( ▲ ) / down( ▼ ) button to sel ect the blue screen. Press the right( ▶ ) or ENTER button. Press the up( ▲ ) / down( ▼ ) button to select on or off. Press the MENU button to save. 19 …………………………………………………………………………… INSTRUCTION MANUAL ...

  • Toa 15RTC - page 21

    5. Key Lock Press the up( ▲ ) / down( ▼ ) button to sel ect the key lo ck m enu. Press the right( ▶ ) or ENTER button Press the up( ▲ ) / down( ▼ ) button select on or off Press the MENU button to save. INSTRUCTION MANUAL ……………………………………… ……………………………………… 20 ...

  • Toa 15RTC - page 22

    Us e the VESA standard mount design and the 100m m hole pattern on the back panel to install the L CD monitor to the mounting bracket using the (optional) mount ing bracket sold separately . Wall-mount Installation 1. Remove the monitor stand bracket assembled with monitor. 2. Install the mounting bracket to the monitor using the screws provided wi ...

  • Toa 15RTC - page 23

    ▶ PIN ASSIGNMENTS ▶ ACCESSORY INSTRUCTION MANUAL ……………………………………… …………………………………… 22 2. Power Cord 1. User’s Manual 3. Remote Control Unit And Battery 4. VGA Cabl e ...

  • Toa 15RTC - page 24

    This monitor features a power m anagement sy stem to “power do wn” upon receipt of the VESA DPMS(The display power management si gnaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs th is signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an approp riate mod e throug h ide ...

  • Toa 15RTC - page 25

    LCD- Type 15 ˝ Diagonal A M-TFT(Active-Matrix) Pixel pitch(mm) : 0.297(H) X 0.297(V) BRIGHTNESS: 250cd/ ㎡ (Typical) CONTRAST RATIO: 700:1(Typical) RESPONSE TIME: 8 msec(Typical) RESOLUTION (H x V) 1024X768 @60Hz FREQUENCY HORIZONTAL: 31- 48KHz VERTICAL: 56-75Hz INPUT SIGNAL VIDEO(2ch input 1.0Vp-p, 75 Ω terminated, loop-through out) SYNC(Separ ...

  • Toa 15RTC - page 26

    WEEE Symbols 25 ………………………………… ………………………………………… INSTRUCTION MANUAL “ Going to Sleep” message on screen Correct Disposal of This Product (Waste Electrical &Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This markin ...

メーカー Toa カテゴリー Flat Panel Television

Toa 15RTCのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 15RTCの取扱説明書
- Toaの製品カード
- パンフレット
- またはToa 15RTCの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Toa 15RTCの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Toa 15RTCの取り付け説明書、サービスマニュアル、簡易説明書、またはToa 15RTCのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Toa 15RTCの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Toa 15RTCデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがToa 15RTCを使用するのを助ける技術的文書のことです。説明書は通常、全てのToa 15RTCユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Toaの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Toa 15RTCの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははToa 15RTCの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Toa 15RTCに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Toa 15RTCデバイスの基本機能を使うにあたってのヒント。 Toa 15RTCのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Toa 15RTCに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるToa 15RTCのメーカー/サービスへの連絡先に関する情報。

Toa 15RTCについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもToa 15RTCの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがToa 15RTCで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)